Project

General

Profile

Issue #1818 ยป dmesg.txt

Denis 'GNUtoo' Carikli, 07/02/2017 09:33 PM

 
1
[    0.000000] c0 Initializing cgroup subsys cpu
2
[    0.000000] c0 Linux version 3.0.101-replicant (wolfi@machinist) (gcc version 5.4.1 20160919 (15:5.4.1+svn241155-1) ) #3 SMP PREEMPT Sun May 7 00:51:42 UTC 2017
3
[    0.000000] c0 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d
4
[    0.000000] c0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
5
[    0.000000] c0 Machine: SMDK4210
6
[    0.000000] c0 Memory policy: ECC disabled, Data cache writealloc
7
[    0.000000] c0 CPU EXYNOS4210 (id 0x43210211)
8
[    0.000000] c0 exynos4_init_clocks: initializing clocks
9
[    0.000000] c0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
10
[    0.000000] c0 s3c_register_clksrc: clock audiocdclk has no registers set
11
[    0.000000] c0 audiocdclk: no parent clock specified
12
[    0.000000] c0 s3c_register_clksrc: clock armclk has no registers set
13
[    0.000000] c0 exynos4_setup_clocks: registering clocks
14
[    0.000000] c0 exynos4_setup_clocks: xtal is 24000000
15
[    0.000000] c0 EXYNOS4: PLL settings, A=800000000, M=800000000, E=180633605 V=300000000
16
[    0.000000] c0 EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=200000000
17
[    0.000000] c0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
18
[    0.000000] c0 uclk1: source is mout_mpll (6), rate is 200000000
19
[    0.000000] c0 uclk1: source is mout_mpll (6), rate is 200000000
20
[    0.000000] c0 uclk1: source is mout_mpll (6), rate is 100000000
21
[    0.000000] c0 uclk1: source is mout_mpll (6), rate is 100000000
22
[    0.000000] c0 sclk_csis: source is xusbxti (1), rate is 24000000
23
[    0.000000] c0 sclk_csis: source is xusbxti (1), rate is 24000000
24
[    0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 24000000
25
[    0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 24000000
26
[    0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
27
[    0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
28
[    0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
29
[    0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
30
[    0.000000] c0 sclk_fimd: source is mout_mpll (6), rate is 50000000
31
[    0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 24000000
32
[    0.000000] c0 sclk_mdnie: source is mout_mpll (6), rate is 50000000
33
[    0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 24000000
34
[    0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 24000000
35
[    0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 24000000
36
[    0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 100000000
37
[    0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 100000000
38
[    0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 12000000
39
[    0.000000] c0 (sec_debug_set_upload_magic) 66262564
40
[    0.000000] c0 (sec_debug_set_upload_cause) cafebabe
41
[    0.000000] c0 On node 0 totalpages: 262144
42
[    0.000000] c0 free_area_init_node: node 0, pgdat c1114aa0, node_mem_map c150a000
43
[    0.000000] c0   Normal zone: 1600 pages used for memmap
44
[    0.000000] c0   Normal zone: 0 pages reserved
45
[    0.000000] c0   Normal zone: 203200 pages, LIFO batch:31
46
[    0.000000] c0   HighMem zone: 448 pages used for memmap
47
[    0.000000] c0   HighMem zone: 56896 pages, LIFO batch:15
48
[    0.000000] c0 sec_debug_magic_init: success reserving magic code area
49
[    0.000000] c0 PERCPU: Embedded 7 pages/cpu @c1d12000 s7168 r8192 d13312 u32768
50
[    0.000000] c0 pcpu-alloc: s7168 r8192 d13312 u32768 alloc=8*4096
51
[    0.000000] c0 pcpu-alloc: [0] 0 [0] 1 
52
[    0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
53
[    0.000000] c0 Kernel command line: console=ttySAC2,115200 consoleblank=0 androidboot.hardware=smdk4210 loglevel=4 console=ram androidboot.serialno=000940b9187e4f sec_debug.enable=0 sec_debug.enable_user=0 c1_watchdog.sec_pet=5 sec_log=0x100000@0x4d900000 s3cfb.bootloaderfb=0x5ec00000 ld9040.get_lcdtype=0x0 consoleblank=0 lpj=3981312 vmalloc=144m
54
[    0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:106b6d sec_log_buf:fc200000 sec_log_size:1048576
55
[    0.000000] c0 sec_log_save_old: saved old log at 1048576@c1d21160
56
[    0.000000] c0 sec_getlog_supply_kloginfo: 0xcd900000
57
[    0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)
58
[    0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
59
[    0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
60
[    0.000000] c0 allocated 4194304 bytes of page_cgroup
61
[    0.000000] c0 please try 'cgroup_disable=memory' option if you don't want memory cgroups
62
[    0.000000] c0 Memory: 1024MB = 1024MB total
63
[    0.000000] c0 Memory: 797016k/797016k available, 251560k reserved, 229376K highmem
64
[    0.000000] c0 Virtual kernel memory layout:
65
[    0.000000] c0     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
66
[    0.000000] c0     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
67
[    0.000000] c0     DMA     : 0xfea00000 - 0xffe00000   (  20 MB)
68
[    0.000000] c0     vmalloc : 0xf2800000 - 0xfb000000   ( 136 MB)
69
[    0.000000] c0     lowmem  : 0xc0000000 - 0xf2000000   ( 800 MB)
70
[    0.000000] c0     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
71
[    0.000000] c0     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
72
[    0.000000] c0       .init : 0xc0008000 - 0xc070e000   (7192 kB)
73
[    0.000000] c0       .text : 0xc070e000 - 0xc0f0b000   (8180 kB)
74
[    0.000000] c0       .data : 0xc0f0c000 - 0xc1115620   (2086 kB)
75
[    0.000000] c0        .bss : 0xc1115644 - 0xc1509568   (4048 kB)
76
[    0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
77
[    0.000000] c0 Preemptible hierarchical RCU implementation.
78
[    0.000000] c0 NR_IRQS:493
79
[    0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
80
[    0.000000] c0 Console: colour dummy device 80x30
81
[    0.000000] c0 Calibrating delay loop (skipped) preset value.. 1592.52 BogoMIPS (lpj=3981312)
82
[    0.000000] c0 pid_max: default: 32768 minimum: 301
83
[    0.000000] c0 Security Framework initialized
84
[    0.000000] c0 SELinux:  Initializing.
85
[    0.000000] c0 SELinux:  Starting in permissive mode
86
[    0.000000] c0 Mount-cache hash table entries: 512
87
[    0.000000] c0 Initializing cgroup subsys debug
88
[    0.000000] c0 Initializing cgroup subsys cpuacct
89
[    0.000000] c0 Initializing cgroup subsys memory
90
[    0.000000] c0 Initializing cgroup subsys freezer
91
[    0.000000] c0 CPU: Testing write buffer coherency: ok
92
[    0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
93
[    0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
94
[    0.000000] c0 L310 cache controller enabled
95
[    0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B
96
[    0.030000] c1 CPU1: Booted secondary processor
97
[    0.030000] c1 CPU1: Booted secondary processor
98
[    0.030000] c1 notifier_call_chain : NOTIFY BAD tick_notify
99
[    0.040000] c0 Brought up 2 CPUs
100
[    0.040000] c0 SMP: Total of 2 processors activated (3185.04 BogoMIPS).
101
[    0.045000] c0 print_constraints: dummy: 
102
[    0.045000] c0 NET: Registered protocol family 16
103
[    0.050000] c0 universal_tsp_init touch : 356
104
[    0.050000] c0 smdkc210_machine_init() register sii9234 driver
105
[    0.050000] c0 Registered chained gpio int handler for interrupt 110.
106
[    0.050000] c0 Registered interrupt support for gpio group 20.
107
[    0.050000] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
108
[    0.050000] c0 usb: smdkc210_usbgadget_init: default luns=0, new luns=2
109
[    0.050000] c0 usb: smdkc210_usbgadget_init tune_mask=0x10380f, tune=0x10280b
110
[    0.050000] c0 ld9040_fb_init :: lcdtype=0
111
[    0.050000] c0 brcm_wlan_init: start
112
[    0.050000] c0 brcm_init_wlan_mem: WIFI MEM Allocated
113
[    0.065000] c0 exynos4_pmu_init: PMU supports 4210(71)
114
[    0.065000] c0 S3C Power Management, Copyright 2004 Simtec Electronics
115
[    0.065000] c0 EXYNOS4: Initializing architecture
116
[    0.065000] c0 s3c-adc samsung-adc-v3: attached adc driver
117
[    0.065000] c0 samsung-pd samsung-pd.0: power domain registered
118
[    0.065000] c0 samsung-pd samsung-pd.1: power domain registered
119
[    0.065000] c0 samsung-pd samsung-pd.2: power domain registered
120
[    0.065000] c0 lcd0 disable skip only one time
121
[    0.065000] c0 samsung-pd samsung-pd.3: power domain registered
122
[    0.065000] c0 samsung-pd samsung-pd.5: power domain registered
123
[    0.065000] c0 samsung-pd samsung-pd.4: power domain registered
124
[    0.065000] c0 samsung-pd samsung-pd.6: power domain registered
125
[    0.065000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
126
[    0.065000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
127
[    0.065000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
128
[    0.065000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
129
[    0.065000] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
130
[    0.065000] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
131
[    0.065000] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.
132
[    0.065000] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
133
[    0.065000] c0 s5p-sysmmu s5p-sysmmu.9: Initialized for s5p-fimg2d.
134
[    0.065000] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.
135
[    0.065000] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
136
[    0.065000] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
137
[    0.090000] c0 bio: create slab <bio-0> at 0
138
[    0.095000] c0 SCSI subsystem initialized
139
[    0.095000] c0 usbcore: registered new interface driver usbfs
140
[    0.095000] c0 usbcore: registered new interface driver hub
141
[    0.095000] c0 usbcore: registered new device driver usb
142
[    0.095000] c0 i2c-gpio i2c-gpio.8: using pins 91 (SDA) and 89 (SCL)
143
[    0.095000] c0 i2c-gpio i2c-gpio.9: using pins 163 (SDA) and 164 (SCL)
144
[    0.095000] c0 i2c-gpio i2c-gpio.11: using pins 99 (SDA) and 107 (SCL)
145
[    0.095000] c0 i2c-gpio i2c-gpio.14: using pins 136 (SDA) and 135 (SCL)
146
[    0.095000] c0 i2c-gpio i2c-gpio.12: using pins 31 (SDA) and 33 (SCL)
147
[    0.095000] c0 i2c-gpio i2c-gpio.15: using pins 154 (SDA) and 156 (SCL)
148
[    0.100000] c0 i2c-gpio i2c-gpio.16: using pins 18 (SDA) and 19 (SCL)
149
[    0.100000] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
150
[    0.100000] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
151
[    0.100000] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
152
[    0.100000] c0 max8997 5-0066: max8997_irq_init: PMIC ID(0x77)
153
[    0.100000] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
154
[    0.100000] c1 max8997 5-0066: Unused interrupt source: 0x0
155
[    0.100000] c0 max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck1: 1350000, i:28
156
[    0.100000] c0 max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck2: 1150000, i:20
157
[    0.100000] c0 max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck5: 1200000, i:22
158
[    0.105000] c0 max8997-pmic max8997-pmic: RAMP REG(0xf9)
159
[    0.105000] c0 print_constraints: VADC_3.3V_C210: 3300 mV 
160
[    0.105000] c0 print_constraints: VUSB_1.1V: 1100 mV 
161
[    0.105000] c0 print_constraints: VMIPI_1.8V: 1800 mV 
162
[    0.105000] c0 print_constraints: VHSIC_1.2V: 1200 mV 
163
[    0.105000] c0 print_constraints: CAM_ISP_1.8V: 1800 mV 
164
[    0.105000] c0 print_constraints: VUSB_3.3V: 3300 mV 
165
[    0.105000] c0 print_constraints: VPLL_1.1V: 1100 mV 
166
[    0.110000] c0 print_constraints: TOUCH_2.8V: 2800 mV 
167
[    0.110000] c0 print_constraints: VT_CAM_1.8V: 1800 mV 
168
[    0.110000] c0 print_constraints: VCC_3.0V_LCD: 3000 mV 
169
[    0.110000] c0 print_constraints: VCC_2.8V_MOTOR: 2800 mV 
170
[    0.110000] c0 print_constraints: LED_A_2.8V: 2800 mV 
171
[    0.110000] c0 print_constraints: CAM_SENSOR_IO_1.8V: 1800 mV 
172
[    0.110000] c0 print_constraints: VTF_2.8V: 2800 mV 
173
[    0.110000] c0 print_constraints: TOUCH_LED_3.3V: 2500 <--> 3300 mV at 3000 mV 
174
[    0.110000] c0 print_constraints: VDDQ_M1M2_1.2V: 1200 mV 
175
[    0.115000] c0 print_constraints: vdd_arm range: 650 <--> 2225 mV at 1350 mV 
176
[    0.115000] c0 print_constraints: vdd_int range: 650 <--> 2225 mV at 1150 mV 
177
[    0.115000] c0 print_constraints: G3D_1.1V: 900 <--> 1200 mV at 1000 mV 
178
[    0.115000] c0 print_constraints: CAM_ISP_CORE_1.2V: 1200 mV 
179
[    0.115000] c0 print_constraints: VMEM_1.2V: 1200 mV 
180
[    0.115000] c0 print_constraints: VCC_SUB_2.0V: 2000 mV 
181
[    0.115000] c0 print_constraints: safeout1 range: 
182
[    0.115000] c0 print_constraints: safeout2 range: 
183
[    0.115000] c0 print_constraints: FLASH_CUR: 23 <--> 750 mA at 492 mA 
184
[    0.115000] c0 print_constraints: MOVIE_CUR: 15 <--> 250 mA at 15 mA 
185
[    0.115000] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
186
[    0.120000] c0 s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter
187
[    0.120000] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
188
[    0.120000] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.
189
[    0.120000] c0 Bluetooth: Core ver 2.16
190
[    0.120000] c0 NET: Registered protocol family 31
191
[    0.120000] c0 Bluetooth: HCI device and connection manager initialized
192
[    0.120000] c0 Bluetooth: HCI socket layer initialized
193
[    0.120000] c0 Bluetooth: L2CAP socket layer initialized
194
[    0.120000] c0 Bluetooth: SCO socket layer initialized
195
[    0.120000] c0 cfg80211: Calling CRDA to update world regulatory domain
196
[    0.120000] c0 Switching to clocksource mct-frc
197
[    0.120741] c0 Switched to NOHz mode on CPU #0
198
[    0.120873] c1 Switched to NOHz mode on CPU #1
199
[    0.133731] c0 NET: Registered protocol family 2
200
[    0.133960] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
201
[    0.134744] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
202
[    0.136683] c0 TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
203
[    0.137705] c0 TCP: Hash tables configured (established 131072 bind 65536)
204
[    0.137742] c0 TCP reno registered
205
[    0.137769] c0 UDP hash table entries: 512 (order: 2, 16384 bytes)
206
[    0.137829] c0 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
207
[    0.138236] c0 NET: Registered protocol family 1
208
[    0.164756] c0 PMU: registered new PMU device of type 0
209
[    0.166191] c0 MUIC:[/home/wolfi/replicant/6.0-romsrc-clean/kernel/samsung/smdk4412/arch/arm/mach-exynos/sec-switch_max8997.c] func:uart_switch_init
210
[    0.166262] c0 ##MUIC [ /home/wolfi/replicant/6.0-romsrc-clean/kernel/samsung/smdk4412/arch/arm/mach-exynos/sec-switch_max8997.c ]- func : uart_switch_init !! val:-0-
211
[    0.167075] c0 regulator_consumer_probe: loading u1-regulator-consumer
212
[    0.167642] c0 wake enabled for irq 374
213
[    0.167872] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
214
[    0.168264] c0 Loaded driver for PL330 DMAC-0 s3c-pl330
215
[    0.168296] c0 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
216
[    0.168435] c0 Loaded driver for PL330 DMAC-1 s3c-pl330
217
[    0.168467] c0 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
218
[    0.168602] c0 Loaded driver for PL330 DMAC-2 s3c-pl330
219
[    0.168633] c0 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
220
[    0.168884] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
221
[    0.168943] c1 FIPS: self-tests for aes-asm (aes) passed
222
[    0.169052] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
223
[    0.169131] c1 FIPS: self-tests for sha1-asm (sha1) passed
224
[    0.169521] c0 audit: initializing netlink socket (disabled)
225
[    0.169582] c0 type=2000 audit(0.165:1): initialized
226
[    0.170248] c0 highmem bounce pool size: 64 pages
227
[    0.170516] c0 ashmem: initialized
228
[    0.183620] c0 fuse init (API version 7.16)
229
[    0.184422] c0 msgmni has been set to 1108
230
[    0.184550] c0 SELinux:  Registering netfilter hooks
231
[    0.185199] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
232
[    0.185232] c1 FIPS: self-tests for non-FIPS cipher_null-generic (cipher_null) passed
233
[    0.185343] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
234
[    0.185376] c1 FIPS: self-tests for non-FIPS ecb-cipher_null (ecb(cipher_null)) passed
235
[    0.185483] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
236
[    0.185515] c1 FIPS: self-tests for non-FIPS digest_null-generic (digest_null) passed
237
[    0.185621] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
238
[    0.185653] c1 FIPS: self-tests for non-FIPS compress_null-generic (compress_null) passed
239
[    0.185760] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
240
[    0.185830] c1 FIPS: self-tests for non-FIPS md4-generic (md4) passed
241
[    0.185939] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
242
[    0.186001] c1 FIPS: self-tests for non-FIPS md5-generic (md5) passed
243
[    0.186111] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
244
[    0.186178] c1 FIPS: self-tests for sha1-generic (sha1) passed
245
[    0.186284] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
246
[    0.186342] c1 FIPS: self-tests for sha224-generic (sha224) passed
247
[    0.186451] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
248
[    0.186502] c1 FIPS: self-tests for sha256-generic (sha256) passed
249
[    0.186611] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
250
[    0.186833] c1 FIPS: self-tests for sha384-generic (sha384) passed
251
[    0.186943] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
252
[    0.187151] c1 FIPS: self-tests for sha512-generic (sha512) passed
253
[    0.187267] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
254
[    0.187323] c1 FIPS: self-tests for des-generic (des) passed
255
[    0.187431] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
256
[    0.187488] c1 FIPS: self-tests for des3_ede-generic (des3_ede) passed
257
[    0.187598] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
258
[    0.187630] c1 FIPS: self-tests for non-FIPS twofish-generic (twofish) passed
259
[    0.187731] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
260
[    0.187813] c1 FIPS: self-tests for aes-generic (aes) passed
261
[    0.187922] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
262
[    0.187953] c1 FIPS: self-tests for non-FIPS arc4-generic (arc4) passed
263
[    0.188054] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
264
[    0.188567] c1 FIPS: self-tests for non-FIPS deflate-generic (deflate) passed
265
[    0.188708] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
266
[    0.188795] c1 FIPS: self-tests for crc32c-generic (crc32c) passed
267
[    0.188911] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
268
[    0.188949] c1 alg: comp: Compression test 1 failed for lzo-generic: output len = 57
269
[    0.188997] c1 FIPS: self-tests for non-FIPS lzo (lzo-generic) failed
270
[    0.189107] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
271
[    0.189138] c1 FIPS: No test for lz4 (lz4-generic)
272
[    0.189231] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
273
[    0.189262] c1 FIPS: No test for stdrng (krng)
274
[    0.189362] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
275
[    0.212159] c1 FIPS: self-tests for ansi_cprng (stdrng) passed
276
[    0.212286] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
277
[    0.212319] c1 FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng)
278
[    0.212508] c0 FIPS: self-tests for non-FIPS md5 (md5) passed
279
[    0.212646] c0 FIPS: self-tests for sha1 (sha1) passed
280
[    0.213064] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
281
[    0.213155] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
282
[    0.213470] c1 FIPS: self-tests for ecb(des-generic) (ecb(des)) passed
283
[    0.214065] c0 FIPS: self-tests for ecb(des) (ecb(des)) passed
284
[    0.214447] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
285
[    0.214536] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
286
[    0.214973] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
287
[    0.215144] c1 FIPS: self-tests for non-FIPS cbc(des-generic) (cbc(des)) passed
288
[    0.215432] c0 FIPS: self-tests for non-FIPS cbc(des) (cbc(des)) passed
289
[    0.215817] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
290
[    0.215898] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
291
[    0.216003] c0 FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
292
[    0.216237] c0 FIPS: self-tests for ecb(des3_ede) (ecb(des3_ede)) passed
293
[    0.216606] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
294
[    0.216713] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
295
[    0.217151] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
296
[    0.217302] c0 FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
297
[    0.217565] c0 FIPS: self-tests for cbc(des3_ede) (cbc(des3_ede)) passed
298
[    0.217703] c0 FIPS: self-tests for non-FIPS md4 (md4) passed
299
[    0.217824] c0 FIPS: self-tests for sha256 (sha256) passed
300
[    0.218188] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
301
[    0.218295] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
302
[    0.218525] c0 FIPS: self-tests for non-FIPS ecb(twofish-generic) (ecb(twofish)) passed
303
[    0.218951] c0 FIPS: self-tests for non-FIPS ecb(twofish) (ecb(twofish)) passed
304
[    0.219321] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
305
[    0.219429] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
306
[    0.219870] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
307
[    0.220128] c0 FIPS: self-tests for non-FIPS cbc(twofish-generic) (cbc(twofish)) passed
308
[    0.220540] c0 FIPS: self-tests for non-FIPS cbc(twofish) (cbc(twofish)) passed
309
[    0.220911] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
310
[    0.221018] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
311
[    0.221146] c0 FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
312
[    0.221403] c0 FIPS: self-tests for ecb(aes) (ecb(aes)) passed
313
[    0.221766] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
314
[    0.221871] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
315
[    0.222320] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
316
[    0.222481] c0 FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
317
[    0.222760] c0 FIPS: self-tests for cbc(aes) (cbc(aes)) passed
318
[    0.223125] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
319
[    0.223233] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
320
[    0.223676] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
321
[    0.223822] c0 FIPS: self-tests for ctr(aes-asm) (ctr(aes)) passed
322
[    0.224071] c0 FIPS: self-tests for ctr(aes) (ctr(aes)) passed
323
[    0.224433] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
324
[    0.224539] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
325
[    0.224987] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
326
[    0.225481] c0 FIPS: self-tests for rfc3686(ctr(aes-asm)) (rfc3686(ctr(aes))) passed
327
[    0.226306] c0 FIPS: self-tests for rfc3686(ctr(aes)) (rfc3686(ctr(aes))) passed
328
[    0.226757] c0 FIPS: self-tests for sha384 (sha384) passed
329
[    0.227183] c0 FIPS: self-tests for sha512 (sha512) passed
330
[    0.228081] c0 FIPS: self-tests for non-FIPS deflate (deflate) passed
331
[    0.228518] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
332
[    0.228630] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
333
[    0.228859] c0 FIPS: self-tests for non-FIPS ecb(arc4-generic) (ecb(arc4)) passed
334
[    0.229324] c0 FIPS: self-tests for non-FIPS ecb(arc4) (ecb(arc4)) passed
335
[    0.229505] c0 FIPS: self-tests for crc32c (crc32c) passed
336
[    0.229627] c0 FIPS: self-tests for sha224 (sha224) passed
337
[    0.229943] c0 alg: comp: Failed to load transform for lzo: -2
338
[    0.230437] c0 alg: comp: Failed to load transform for lzo: -2
339
[    0.230470] c0 FIPS: self-tests for non-FIPS lzo (lzo) failed
340
[    0.230839] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
341
[    0.230950] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
342
[    0.231397] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
343
[    0.231788] c0 FIPS: self-tests for non-FIPS cts(cbc(aes-asm)) (cts(cbc(aes))) passed
344
[    0.232522] c0 FIPS: self-tests for non-FIPS cts(cbc(aes)) (cts(cbc(aes))) passed
345
[    0.232895] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
346
[    0.233005] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
347
[    0.233182] c0 FIPS: self-tests for non-FIPS hmac(md5-generic) (hmac(md5)) passed
348
[    0.233535] c0 FIPS: self-tests for non-FIPS hmac(md5) (hmac(md5)) passed
349
[    0.233905] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
350
[    0.234013] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
351
[    0.234227] c0 FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
352
[    0.234652] c0 FIPS: self-tests for hmac(sha1) (hmac(sha1)) passed
353
[    0.235048] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
354
[    0.235162] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
355
[    0.235517] c0 FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
356
[    0.236227] c0 FIPS: self-tests for hmac(sha256) (hmac(sha256)) passed
357
[    0.236600] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
358
[    0.236711] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
359
[    0.237502] c0 FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
360
[    0.239084] c0 FIPS: self-tests for hmac(sha384) (hmac(sha384)) passed
361
[    0.239457] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
362
[    0.239568] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
363
[    0.240379] c0 FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
364
[    0.241958] c0 FIPS: self-tests for hmac(sha512) (hmac(sha512)) passed
365
[    0.242347] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
366
[    0.242459] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
367
[    0.242675] c0 FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
368
[    0.243112] c0 FIPS: self-tests for hmac(sha224) (hmac(sha224)) passed
369
[    0.289415] c0 FIPS: self-tests for ansi_cprng (ansi_cprng) passed
370
[    0.289450] c0 tcrypt: one or more tests failed!
371
[    0.289549] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
372
[    0.289637] c0 FIPS: self-tests for non-FIPS ghash-generic (ghash) passed
373
[    0.289728] c0 io scheduler noop registered
374
[    0.289754] c0 io scheduler deadline registered
375
[    0.289894] c0 io scheduler cfq registered (default)
376
[    0.289923] c0 io scheduler row registered
377
[    0.289947] c0 io scheduler sio registered
378
[    0.290203] c0 s3cfb s3cfb.0: div(32) max should be 16
379
[    0.290236] c0 s3cfb s3cfb.0: vclk=25067520, div=32(16), rate=50000000
380
[    0.290323] c0 s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
381
[    0.290582] c0 s3cfb s3cfb.0: [fb2] dma: 0x7143c000, cpu: 0xf2909000, size: 0x002ee000
382
[    0.292547] c0 sec_getlog_supply_fbinfo: 0x7143c000 480 800 32 2
383
[    0.294903] c0 Bootloader sent 'bootloaderfb' : 5EC00000
384
[    0.296013] c0 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
385
[    0.296141] c0 s3cfb s3cfb.0: registered successfully
386
[    0.296830] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
387
[    0.296870] c0 mdnie mdnie: registered successfully
388
[    0.297326] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
389
[    0.365341] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
390
[    0.380088] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
391
[    0.395077] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
392
[    0.450834] c0 console [ttySAC2] enabled
393
[    0.465073] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
394
[    0.480419] c0 Mali: exynos_result_of_asv_group = 0x0, target_asv = 0x0
395
[    0.480458] c0 Mali: mali_dvfs[0].vol = 950000 
396
[    0.480485] c0 Mali: mali_dvfs[1].vol = 950000 
397
[    0.480512] c0 Mali: mali_runtime_resume.vol = 950000 
398
[    0.480540] c0 Mali: mali_dvfs[2].vol = 1000000 
399
[    0.480567] c0 Mali: init_gpu_vol = 1000000 
400
[    0.480659] c0 Mali: Mali frequency 266
401
[    0.480684] c0 Mali: init_mali_clock mali_clock c107816c
402
[    0.481147] c0 Mali: = regulator_set_voltage: 1000000, 1000000 
403
[    0.481620] c0 Mali: Mali frequency 200
404
[    0.504920] c0 Mali: Mali device driver loaded
405
[    0.505313] c0 UMP: UMP device driver 0000 loaded
406
[    0.513461] c0 brd: module loaded
407
[    0.517536] c0 loop: module loaded
408
[    0.518145] c0 zram: Created 1 device(s) ...
409
[    0.518807] c0 sec_jack_probe : Registering jack driver
410
[    0.520006] c0 wake enabled for irq 378
411
[    0.520563] c0 input: max8997-muic as /devices/platform/s3c2440-i2c.5/i2c-5/5-0066/max8997-muic/input/input0
412
[    0.520625] c0 max8997_muic_cfg_uart_gpio: path=0
413
[    0.520840] c0 max8997-muic max8997-muic: max8997_muic_set_adcdbset: ADCDBSET(0x20)
414
[    0.521951] c0 Loading pn544 driver
415
[    0.522009] c0 pn544_probe : IRQ num 367
416
[    0.522230] c0 pn544_probe : requesting IRQ 367
417
[    0.523914] c0 lcd panel: ld9040_probe : lcdtype : SM2_A1
418
[    0.523946] c0 lcd panel: ld9040 panel driver has been probed.
419
[    0.524132] c0 PPP generic driver version 2.4.2
420
[    0.524482] c0 PPP Deflate Compression module registered
421
[    0.524512] c0 PPP BSD Compression module registered
422
[    0.524567] c0 PPP MPPE Compression module registered
423
[    0.524600] c0 NET: Registered protocol family 24
424
[    0.524632] c0 tun: Universal TUN/TAP device driver, 1.6
425
[    0.524660] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
426
[    0.525044] c0 usbcore: registered new interface driver ath9k_htc
427
[    0.525266] c0 host_notifier host_notifier.0: notifier_prove
428
[    0.525934] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
429
[    0.526310] c0 usbcore: registered new interface driver usblp
430
[    0.526346] c0 Initializing USB Mass Storage driver...
431
[    0.526532] c0 usbcore: registered new interface driver usb-storage
432
[    0.526566] c0 USB Mass Storage support registered.
433
[    0.526647] c0 otg pdata e414a7a0, irq c0a420a4
434
[    0.526959] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
435
[    0.527002] c0 s3c-udc : version 15 March 2009
436
[    0.527028] c0 init
437
[    0.527568] c0 usb: android_bind disconnect
438
[    0.527595] c0 usb: usb_gadget_disconnect
439
[    0.529734] c0 usb: usb_string_id cdev(0xe43112a0)->next_string_id=1
440
[    0.529914] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
441
[    0.529953] c0 android_usb gadget: Number of LUNs=2
442
[    0.529986] c0  lun0: LUN: removable file: (no medium)
443
[    0.530046] c0  lun1: LUN: removable file: (no medium)
444
[    0.530943] c0 usb: usb_string_id cdev(0xe43112a0)->next_string_id=2
445
[    0.530978] c0 usb: usb_string_id cdev(0xe43112a0)->next_string_id=3
446
[    0.531021] c0 usb: usb_string_id cdev(0xe43112a0)->next_string_id=4
447
[    0.531061] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
448
[    0.531092] c0 usb: composite_bind bcdDevice=0x0
449
[    0.531117] c0 usb: composite_bind composite_manufacturer=
450
[    0.531155] c0 android_usb gadget: android_usb ready
451
[    0.531186] c0 usb: Skip udc_enable
452
[    0.532287] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
453
[    0.532534] c0 [keys]PWR 0
454
[    0.533057] c0 input: sec_touchscreen as /devices/virtual/input/input2
455
[    0.650550] c0 Atmel MXT224 3-004a: family = 0x81, variant = 0x1, version= 0x10, build = 170
456
[    0.650598] c0 [TSP] family = 0x81, variant = 0x1, version = 0x10, build = 170
457
[    0.665942] c0 [TSP] TSP chip is MXT224-E
458
[    0.668726] c0 [TSP]user_info_value is 0
459
[    0.750054] c0 [TSP] ta_status is 0
460
[    0.751902] c0 [TSP] mxt224_ta_probe
461
[    0.757181] c0 [TSP]TA_probe MXT224E T48 Byte2 is 66
462
[    0.763272] c0 [TSP]TA_probe MXT224E T48 Byte2 is 98
463
[    0.767703] c0 [TSP] calibration success!!!
464
[    0.795052] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: enable WTSR
465
[    0.820049] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_smpl: enable SMPL
466
[    0.845185] c0 max8997_rtc_enable_smpl: WTSR_SMPL(0xc3)
467
[    0.846410] c0 using rtc device, max8997-rtc, for alarms
468
[    0.846468] c0 max8997-rtc max8997-rtc: rtc core: registered max8997-rtc as rtc0
469
[    0.846846] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
470
[    0.846884] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
471
[    0.847141] c1 max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
472
[    0.847355] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
473
[    0.847393] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
474
[    0.847435] c1 max8997 5-0066: Unused interrupt source: 0x0
475
[    0.847591] c0 i2c /dev entries driver
476
[    0.850349] c0 lirc_dev: IR Remote Control driver registered, major 250 
477
[    0.850388] c0 IR NEC protocol handler initialized
478
[    0.850418] c0 IR RC5(x) protocol handler initialized
479
[    0.850448] c0 IR RC6 protocol handler initialized
480
[    0.850473] c0 IR JVC protocol handler initialized
481
[    0.850499] c0 IR Sony protocol handler initialized
482
[    0.850529] c0 IR RC5 (streamzap) protocol handler initialized
483
[    0.850564] c0 IR LIRC bridge handler initialized
484
[    0.850589] c0 Linux video capture interface: v2.00
485
[    0.850894] c0 [S5K5BAFX] s5k5bafx_create_sysfs
486
[    0.851373] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
487
[    0.851446] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
488
[    0.851626] c0 Initialize JPEG driver
489
[    0.852123] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
490
[    0.852391] c0 s5p_int_src_ext_hpd()
491
[    0.852425] c0 s5p_hpd_read_gpio(0)
492
[    0.852633] c0 s5p_hpd_read_gpio(0)
493
[    0.853120] c0 i2c i2c-7: attached s5p_ddc into i2c adapter successfully
494
[    0.853300] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
495
[    0.853349] c0 i2c-core: driver [s5p_ddc] using legacy resume method
496
[    0.853844] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully
497
[    0.854728] c0 sii9234_cfg_gpio()
498
[    0.854761] c0 Registered chained gpio int handler for interrupt 111.
499
[    0.854814] c0 Registered interrupt support for gpio group 10.
500
[    0.854851] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
501
[    0.855259] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
502
[    0.855370] c0 sii9234 : create mhl sysfile
503
[    0.855938] c0 input: sii9234_rcp as /devices/virtual/input/input3
504
[    0.856854] c0 max8997-charger max8997-charger: max8997_charger_probe : MAX8997 Charger Driver Loading
505
[    0.858546] c0 max8922-charger max8922-charger: max8922_probe : MAX8922 Charger Driver Loading
506
[    0.858663] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
507
[    0.859064] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
508
[    0.859130] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
509
[    0.859351] c0 max17042 9-0036: max17042_probe: MAX17042 Driver Loading
510
[    0.860251] c0 max17042 9-0036: max17042_probe : is enable (1)
511
[    0.860287] c0 max17042 9-0036: max17042_init_regs
512
[    0.861405] c0 max17042 9-0036: fuel alert soc (2)
513
[    0.861434] c0 max17042 9-0036: max17042_alert_init
514
[    0.863032] c1 wake enabled for irq 371
515
[    0.864145] c1 max17042 9-0036: max17042_irq_init : config_reg(2314) irq(371)
516
[    0.864791] c1 max17042 9-0036: MAX17042 Fuel-Gauge Ver 1460
517
[    0.864848] c1 max17042 9-0036: max17042_probe: MAX17042 Driver Loaded
518
[    0.865207] c1 i2c-core: driver [max17042] using legacy suspend method
519
[    0.865248] c1 i2c-core: driver [max17042] using legacy resume method
520
[    0.867987] c1 max17042 9-0036: max17042_get_soc : soc(58e5)
521
[    0.868020] c1 max17042_need_soc_recal: HW(0xe)
522
[    0.868049] c1 max17042 9-0036: max17042_get_soc : use raw (88), soc (91)
523
[    0.869210] c1 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
524
[    0.869297] c1 Bluetooth: HCI UART driver ver 2.2
525
[    0.869326] c1 Bluetooth: HCI H4 protocol initialized
526
[    0.869838] c1 cpuidle: using governor ladder
527
[    0.870601] c1 cpuidle: using governor menu
528
[    0.870753] c1 mshci: Mobile Storage Host Controller Interface driver
529
[    0.870788] c1 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
530
[    0.870972] c1 dw_mmc dw_mmc: clock source 0: sclk_dwmci (90316800 Hz)
531
[    0.871250] c1 mmc0: Version ID 0x5342230a.
532
[    0.874194] c1 mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
533
[    0.874665] c1 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
534
[    0.874939] c1 sdhci: Secure Digital Host Controller Interface driver
535
[    0.874979] c1 sdhci: Copyright(c) Pierre Ossman
536
[    0.875155] c1 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (8888888 Hz)
537
[    0.875417] c1 mmc1: vtf_2.8v regulator found
538
[    0.900371] c0 mmc0: cmd 52 response timeout error
539
[    0.904032] c0 mmc0: cmd 52 response timeout error
540
[    0.912033] c0 mmc0: cmd 8 response timeout error
541
[    0.915619] c0 mmc0: cmd 5 response timeout error
542
[    0.920274] c0 mmc0: cmd 5 response timeout error
543
[    0.924962] c0 mmc0: cmd 5 response timeout error
544
[    0.929665] c0 mmc0: cmd 5 response timeout error
545
[    0.934368] c0 mmc0: cmd 55 response timeout error
546
[    0.939142] c0 mmc0: cmd 55 response timeout error
547
[    0.943916] c0 mmc0: cmd 55 response timeout error
548
[    0.948689] c0 mmc0: cmd 55 response timeout error
549
[    0.971727] c0 mmc0: VIS00M: 15010056495330304d0940b9187e4f21
550
[    1.059694] c0 Registered led device: mmc1::
551
[    1.060101] c1 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
552
[    1.060293] c1 wake enabled for irq 380
553
[    1.060318] c1 mmc1: card inserted.
554
[    1.060410] c1 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
555
[    1.060485] c1 mmc2: no vmmc regulator found
556
[    1.063500] c1 Registered led device: mmc2::
557
[    1.063748] c1 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
558
[    1.069898] c1 usbcore: registered new interface driver usbhid
559
[    1.069934] c1 usbhid: USB HID core driver
560
[    1.070257] c0 mmc0 : 00 : 09 : 20120130 : 0.
561
[    1.070552] c1 logger: created 2048K log 'log_main'
562
[    1.070750] c1 logger: created 256K log 'log_events'
563
[    1.070970] c1 logger: created 1024K log 'log_radio'
564
[    1.071170] c1 logger: created 256K log 'log_system'
565
[    1.071372] c1 logger: created 256K log 'log_sf'
566
[    1.071403] c1 sec_getlog_supply_loggerinfo: 0xc12c0134 0xc11c0134 0xc1180134 0xc1140134
567
[    1.071565] c0 mmc0: Voltage range not supported for power class.
568
[    1.071600] c0 mmc0: power class selection to bus width 8 failed
569
[    1.076382] c0 mmc0: Voltage range not supported for power class.
570
[    1.076418] c0 mmc0: power class selection to bus width 8 ddr 2 failed
571
[    1.076603] c1 k3dh_probe: is started.
572
[    1.082896] c0 mmc0: new high speed DDR MMC card at address 0001
573
[    1.082938] c1 using defualt position
574
[    1.086513] c0 mmcblk0: mmc0:0001 VIS00M 14.6 GiB 
575
[    1.087482] c1 k3dh_probe: is successful.
576
[    1.088242] c0 input: gyro_sensor as /devices/virtual/input/input4
577
[    1.089228] c1 akm8975_probe is called.
578
[    1.091306] c0 akm8975_probe: asa_x = 162, asa_y = 161, asa_z = 173
579
[    1.091937] c0 Registered sensors device: magnetic_sensor
580
[    1.091978] c0 akm8975_probe is successful.
581
[    1.092656] c0 GPT:Primary header thinks Alt. header is not at the end of the disk.
582
[    1.092697] c0 GPT:30775295 != 30777343
583
[    1.092719] c0 GPT:Alternate GPT header not at the end of the disk.
584
[    1.092752] c0 GPT:30775295 != 30777343
585
[    1.092774] c0 GPT: Use GNU Parted to correct GPT errors.
586
[    1.092903] c0  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
587
[    1.125391] c0 mmc1: cmd 52 command timeout error
588
[    1.125765] c0 mmc1: cmd 52 command timeout error
589
[    1.129669] c0 mmc1: cmd 5 command timeout error
590
[    1.130013] c0 mmc1: cmd 5 command timeout error
591
[    1.130354] c0 mmc1: cmd 5 command timeout error
592
[    1.130692] c0 mmc1: cmd 5 command timeout error
593
[    1.150323] c0 cm3663_setup_reg: initial proximity value = 2
594
[    1.156745] c0 input: proximity_sensor as /devices/virtual/input/input5
595
[    1.157316] c0 input: light_sensor as /devices/virtual/input/input6
596
[    1.159925] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
597
[    1.160088] c0 audss_init: RCLK SRC[busclk]
598
[    1.160184] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
599
[    1.160436] c0 pmu_debug: 0x00000900
600
[    1.171868] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
601
[    1.171910] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
602
[    1.171946] c0 i2s_txctrl: Turn Off - spr is no active
603
[    1.171989] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
604
[    1.172023] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
605
[    1.183647] c0 mmc1: new high speed SDHC card at address 5dac
606
[    1.184119] c0 mmcblk1: mmc1:5dac SD08G 7.32 GiB 
607
[    1.185120] c0  mmcblk1: p1
608
[    1.236042] c0 asoc: mc1n2-da0i <-> samsung-i2s.0 mapping ok
609
[    1.237045] c0 Samsung SRP driver, (c) 2010 Samsung Electronics
610
[    1.248396] c0 SRP: Driver successfully probed
611
[    1.248595] c0 ALSA device list:
612
[    1.248618] c0   #0: U1-YMU823
613
[    1.248771] c0 GACT probability NOT on
614
[    1.248800] c0 Mirror/redirect action on
615
[    1.248826] c0 u32 classifier
616
[    1.248844] c0     Actions configured
617
[    1.248869] c0 Netfilter messages via NETLINK v0.30.
618
[    1.248952] c0 nf_conntrack version 0.5.0 (12453 buckets, 49812 max)
619
[    1.249891] c0 ctnetlink v0.93: registering with nfnetlink.
620
[    1.249953] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
621
[    1.249992] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
622
[    1.250467] c0 xt_time: kernel timezone is -0000
623
[    1.252048] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
624
[    1.252229] c0 arp_tables: (C) 2002 David S. Miller
625
[    1.252306] c0 TCP cubic registered
626
[    1.253492] c0 NET: Registered protocol family 10
627
[    1.256346] c0 Mobile IPv6
628
[    1.256395] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
629
[    1.256668] c0 IPv6 over IPv4 tunneling driver
630
[    1.261426] c0 NET: Registered protocol family 17
631
[    1.261478] c0 NET: Registered protocol family 15
632
[    1.261617] c0 Bluetooth: RFCOMM TTY layer initialized
633
[    1.261666] c0 Bluetooth: RFCOMM socket layer initialized
634
[    1.261698] c0 Bluetooth: RFCOMM ver 1.11
635
[    1.261723] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
636
[    1.261756] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
637
[    1.262025] c0 NET: Registered protocol family 35
638
[    1.262401] c0 Registering the dns_resolver key type
639
[    1.262460] c0 EXYNOS4210: Adaptive Support Voltage init
640
[    1.262718] c0 exynos4210_check_vdd_arm: current vdd_arm(1350000uV), set vdd_arm (1.2V)
641
[    1.263266] c0 EXYNOS4: HPM value = 20
642
[    1.263322] c0 EXYNOS4: IDS value = 22
643
[    1.263345] c0 <6>Support 1.2GHz
644
[    1.263366] c0 <6>ASV Group for This Exynos4210 is 0x40000004
645
[    1.263408] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
646
[    1.263472] c0 Registering SWP/SWPB emulation handler
647
[    1.263505] c0 Registering SDIV/UDIV emulation handler
648
[    1.263543] c0 DVFS : VDD_ARM Voltage table set with 4 Group
649
[    1.263574] c0 max8997_set_arm_voltage_table
650
[    1.263608] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[1]=1250000, buck1_vol[1]=24
651
[    1.263815] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[2]=1150000, buck1_vol[2]=20
652
[    1.264010] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[3]=1050000, buck1_vol[3]=16
653
[    1.264205] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[4]=975000, buck1_vol[4]=13
654
[    1.264399] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[5]=950000, buck1_vol[5]=12
655
[    1.264590] c0 max8997-pmic max8997-pmic: max8997_set_buck1_dvs_table: enable BUCK1 GPIO DVS
656
[    1.264967] c0 DVFS : VDD_INT Voltage table set with 4 Group
657
[    1.265377] c0 exynos4_pm_hotplug_device_init: 0
658
[    1.265404] c0 EXYNOS4 PM-hotplug init function
659
[    1.265762] c0 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x154/0x5bc): 
660
[    1.265805] c0 s5p-ehci s5p-ehci: usb phy usage(2)
661
[    1.265950] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
662
[    1.266289] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
663
[    1.266445] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
664
[    1.275074] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
665
[    1.275168] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
666
[    1.275208] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
667
[    1.275248] c0 usb usb1: Product: S5P EHCI Host Controller
668
[    1.275278] c0 usb usb1: Manufacturer: Linux 3.0.101-replicant ehci_hcd
669
[    1.275313] c0 usb usb1: SerialNumber: s5p-ehci
670
[    1.275879] c0 hub 1-0:1.0: USB hub found
671
[    1.275916] c0 hub 1-0:1.0: 3 ports detected
672
[    1.276251] c0 CP not ready, Active State low
673
[    1.276387] c0 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 3, 2nd_throttle = 5
674
[    1.276426] c0 @@@ get_refresh_interval = 0x2e
675
[    1.276450] c0 @@@ get_refresh_interval = 0x5d
676
[    1.276482] c0 ** temperature set value **
677
[    1.276502] c0 1st throttling stop_temp  = 61, start_temp     = 64
678
[    1.276530] c0 2nd throttling stop_temp  = 87, start_tmep     = 103
679
[    1.276559] c0 tripping temp             = 110, s/w emergency temp = 120
680
[    1.276590] c0 mem throttling stop_temp  = 80, start_temp     = 85
681
[    1.276729] c0 exynos4210_tmu_init: triminfo = 0x0000004f, low 8bit = 0x4f, high 24 bit = 0x000000
682
[    1.276782] c0 THD_TEMP:0x73:  TRIG_LEV0: 0x03
683
[    1.276804] c0 TRIG_LEV1: 0x2a TRIG_LEV2: 0x31, TRIG_LEV3: 0xff
684
[    1.327036] c0 [MODEM_IF] init_modem
685
[    1.327072] c0 check phone active = 94
686
[    1.329362] c0 umts_modem_cfg_gpio done
687
[    1.329395] c0 modem_link_pm_config_gpio done
688
[    1.329645] c0 mif: modem_probe: modem_if
689
[    1.334260] c0 mif: phone_active_irq_handler: PA EVENT : reset =0, pa=0, cp_dump=0
690
[    1.334447] c0 wake enabled for irq 366
691
[    1.334472] c0 mif: create_modemctl_device: xmm6260 is created!!!
692
[    1.334944] c0 wake enabled for irq 361
693
[    1.335257] c0 usbcore: registered new interface driver cdc_modem
694
[    1.335303] c0 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe4243400)
695
[    1.335340] c0 mif: hsic_create_link_device: usb : create_link_device DONE
696
[    1.335375] c0 mif: modem_probe: link created: usb
697
[    1.339113] c0 mif: create_io_device: Bood device = umts_boot0
698
[    1.348764] c0 mif: modem_probe: Complete!!!
699
[    1.350893] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on
700
[    1.352431] c0 OTG s5pc110_otg_module_init(380): s3c_otg_module_init
701
[    1.352625] c0 otg host_probe start c0a2f9b4
702
[    1.555060] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
703
[    1.555132] c0 [TouchKey] i2c_touchkey_probe
704
[    1.555458] c0 input: sec_touchkey as /devices/virtual/input/input7
705
[    1.610568] c0 [TouchKey] Module Version: 12
706
[    1.610598] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
707
[    1.612636] c0 max8997-rtc max8997-rtc: setting system clock to 2000-01-01 00:30:00 UTC (946686600)
708
[    1.612771] c0 ctrl->mem.size = 0x500000
709
[    1.612795] c0 ctrl->mem.base = 0x70f3c000
710
[    1.612914] c0 
711
[    1.612925] c0 
712
[    1.612936] c0 
713
[    1.612946] c0 cam_cfg_gpio: pdev->id=0
714
[    1.613285] c0 FIMC0 registered successfully
715
[    1.613405] c0 ctrl->mem.size = 0x0
716
[    1.613427] c0 ctrl->mem.base = 0xffffffea
717
[    1.613749] c0 FIMC1 registered successfully
718
[    1.613864] c0 ctrl->mem.size = 0x1900000
719
[    1.613888] c0 ctrl->mem.base = 0x6f63c000
720
[    1.614191] c0 FIMC2 registered successfully
721
[    1.614311] c0 ctrl->mem.size = 0x700000
722
[    1.614335] c0 ctrl->mem.base = 0x6ef3c000
723
[    1.614639] c0 FIMC3 registered successfully
724
[    1.614894] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
725
[    1.638224] c0 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
726
[    1.638267] c0 sec-battery sec-battery: sec_bat_probe: use sub-charger (max8922-charger)
727
[    1.638708] c0 sec_bat_get_lpcharging_state: LP charging:0
728
[    1.639630] c1 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loaded
729
[    1.639934] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
730
[    1.639976] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
731
[    1.640541] c0 sec-battery sec-battery: sec_bat_check_temper: temp=280, adc=907
732
[    1.640593] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
733
[    1.640658] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
734
[    1.640708] c0 sec-battery sec-battery: soc(91), vfocv(4069), vcell(4113), temp(28), charging(1), health(1), chg_adc(0)
735
[    1.641460] c1 Warning: unable to open an initial console.
736
[    1.642668] c1 Freeing init memory: 7192K
737
[    1.695528] c0 init: init started!
738
[    1.700814] c0 SELinux: 2048 avtab hash slots, 5220 rules.
739
[    1.703780] c0 SELinux: 2048 avtab hash slots, 5220 rules.
740
[    1.703830] c0 SELinux:  1 users, 2 roles, 567 types, 0 bools, 1 sens, 1024 cats
741
[    1.703873] c0 SELinux:  87 classes, 5220 rules
742
[    1.705576] c0 SELinux:  Completing initialization.
743
[    1.705606] c0 SELinux:  Setting up existing superblocks.
744
[    1.705655] c0 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
745
[    1.705708] c0 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
746
[    1.705807] c0 SELinux: initialized (dev bdev, type bdev), not configured for labeling
747
[    1.705861] c0 SELinux: initialized (dev proc, type proc), uses genfs_contexts
748
[    1.705919] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
749
[    1.705979] c0 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
750
[    1.706467] c0 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
751
[    1.706514] c0 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
752
[    1.706557] c0 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
753
[    1.706612] c0 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
754
[    1.706668] c0 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
755
[    1.706781] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
756
[    1.706842] c0 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
757
[    1.795871] c0 type=1403 audit(946686600.680:2): policy loaded auid=4294967295 ses=4294967295
758
[    1.796438] c0 type=1404 audit(946686600.680:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
759
[    1.930995] c0 init: (Initializing SELinux enforcing took 0.24s.)
760
[    1.971322] c1 init: init second stage started!
761
[    2.152761] c1 init: waitpid failed: No child processes
762
[    2.157299] c1 init: (Loading properties from /default.prop took 0.00s.)
763
[    2.160607] c1 init: (Parsing /init.environ.rc took 0.00s.)
764
[    2.161149] c1 init: (Parsing /init.usb.rc took 0.00s.)
765
[    2.161710] c1 init: /init.smdk4210.rc: 49: invalid command 'socket'
766
[    2.167691] c1 init: (Parsing init.smdk4210.usb.rc took 0.00s.)
767
[    2.167784] c1 init: (Parsing /init.smdk4210.rc took 0.01s.)
768
[    2.168543] c1 init: (Parsing /init.usb.configfs.rc took 0.00s.)
769
[    2.168740] c1 init: (Parsing /init.zygote32.rc took 0.00s.)
770
[    2.168968] c1 init: (Parsing /init.trace.rc took 0.00s.)
771
[    2.169725] c1 init: (Parsing /init.cm.rc took 0.00s.)
772
[    2.169808] c1 init: (Parsing /init.rc took 0.01s.)
773
[    2.170298] c1 sec_bat_get_lpcharging_state: LP charging:0
774
[    2.170658] c1 init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
775
[    2.179436] c1 init: Starting service 'ueventd'...
776
[    2.180433] c1 init: Waiting for /dev/.coldboot_done...
777
[    2.182506] c1 ueventd: ueventd started!
778
[    2.306548] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
779
[    2.325127] c1 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
780
[    2.325307] c1 exynos4_handler_tmu_state: inform to init state to platform.
781
[    2.478923] c1 ueventd: Coldboot took 0.29s.
782
[    2.483937] c1 init: Waiting for /dev/.coldboot_done took 0.30s.
783
[    2.484049] c1 init: /dev/hw_random not found
784
[    2.487063] c1 keychord: using input dev max8997-muic for fevent
785
[    2.487105] c1 keychord: using input dev gpio-keys for fevent
786
[    2.487149] c1 keychord: using input dev sii9234_rcp for fevent
787
[    2.510211] c1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
788
[    2.510567] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
789
[    2.530262] c1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
790
[    2.532306] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
791
[    2.537242] c1 init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
792
[    2.538156] c1 init: write_file: Unable to open '/proc/sys/net/ipv4/fwmark_reflect': No such file or directory
793
[    2.538365] c1 init: write_file: Unable to open '/proc/sys/net/ipv6/fwmark_reflect': No such file or directory
794
[    2.538548] c1 init: write_file: Unable to open '/proc/sys/net/ipv4/tcp_fwmark_accept': No such file or directory
795
[    2.615202] c1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
796
[    2.615495] c1 init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
797
[    2.619461] c1 init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
798
[    2.622286] c1 init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
799
[    2.635477] c1 init: /dev/hw_random not found
800
[    2.635825] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
801
[    2.636714] c0 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=886
802
[    2.636878] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
803
[    2.637083] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
804
[    2.637240] c0 sec-battery sec-battery: soc(91), vfocv(4069), vcell(4113), temp(29), charging(1), health(1), chg_adc(0)
805
[    2.659231] c0 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
806
[    2.659442] c0 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
807
[    2.660192] c0 fs_mgr: __mount(source=/dev/block/mmcblk0p9,target=/system,type=ext4)=0
808
[    2.662667] c0 F2FS-fs (mmcblk0p7): Magic Mismatch, valid(0xf2f52010) - read(0x1900)
809
[    2.662812] c0 F2FS-fs (mmcblk0p7): Can't find valid F2FS filesystem in 1th superblock
810
[    2.671046] c0 F2FS-fs (mmcblk0p7): Magic Mismatch, valid(0xf2f52010) - read(0x0)
811
[    2.671184] c0 F2FS-fs (mmcblk0p7): Can't find valid F2FS filesystem in 2th superblock
812
[    2.705264] c0 fs_mgr: __mount(source=/dev/block/mmcblk0p7,target=/cache,type=f2fs)=-1
813
[    2.772535] c1 MFC F/W loaded successfully (size: 376448)
814
[    2.805631] c0 EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
815
[    2.805882] c0 SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
816
[    2.806416] c0 fs_mgr: check_fs(): mount(/dev/block/mmcblk0p7,/cache,ext4)=0: Success
817
[    2.840246] c0 fs_mgr: check_fs(): unmount(/cache) succeeded
818
[    2.842246] c0 fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p7
819
[    3.094722] c0 e2fsck: e2fsck 1.42.9 (28-Dec-2013)
820
[    3.094806] c0 
821
[    3.095240] c0 e2fsck: /dev/block/mmcblk0p7: clean, 26/6400 files, 1559/25600 blocks
822
[    3.095361] c0 
823
[    3.111956] c0 EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic
824
[    3.112198] c0 SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
825
[    3.112602] c0 fs_mgr: __mount(source=/dev/block/mmcblk0p7,target=/cache,type=ext4)=0
826
[    3.112813] c0 fs_mgr: mount_with_alternatives(): Mounted /dev/block/mmcblk0p7 on /cache with fs_type=ext4 instead of f2fs
827
[    3.151643] c1 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
828
[    3.151881] c1 SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
829
[    3.152261] c1 fs_mgr: check_fs(): mount(/dev/block/mmcblk0p1,/efs,ext4)=0: Success
830
[    3.175241] c1 fs_mgr: check_fs(): unmount(/efs) succeeded
831
[    3.175451] c1 fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p1
832
[    3.294217] c1 e2fsck: e2fsck 1.42.9 (28-Dec-2013)
833
[    3.294302] c1 
834
[    3.294467] c1 e2fsck: /dev/block/mmcblk0p1: clean, 36/1280 files, 2165/5120 blocks
835
[    3.294590] c1 
836
[    3.309896] c1 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic
837
[    3.310210] c1 SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
838
[    3.310558] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p1,target=/efs,type=ext4)=0
839
[    3.312878] c1 F2FS-fs (mmcblk0p10): Magic Mismatch, valid(0xf2f52010) - read(0x20000)
840
[    3.313028] c1 F2FS-fs (mmcblk0p10): Can't find valid F2FS filesystem in 1th superblock
841
[    3.321549] c1 F2FS-fs (mmcblk0p10): Magic Mismatch, valid(0xf2f52010) - read(0x0)
842
[    3.321695] c1 F2FS-fs (mmcblk0p10): Can't find valid F2FS filesystem in 2th superblock
843
[    3.325180] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
844
[    3.328913] c0 normal: free cpufreq_limit & interrupt enable.
845
[    3.350339] c0 fs_mgr: __mount(source=/dev/block/mmcblk0p10,target=/data,type=f2fs)=-1
846
[    3.379283] c0 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
847
[    3.379515] c0 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
848
[    3.379910] c0 fs_mgr: check_fs(): mount(/dev/block/mmcblk0p10,/data,ext4)=0: Success
849
[    3.445307] c0 fs_mgr: check_fs(): unmount(/data) succeeded
850
[    3.445519] c0 fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p10
851
[    3.530406] c0 max8997-muic max8997-muic: max8997_muic_init_detect
852
[    3.530910] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x41
853
[    3.531042] c0 max8997-muic max8997-muic: detect_dev: ATTACHED
854
[    3.531171] c0 max8997-muic max8997-muic: attach_usb
855
[    3.531271] c0 max8997-muic max8997-muic: attach_charger: chg_type(0x1)
856
[    3.531415] c0 [TSP] mxt224_ta_probe
857
[    3.534850] c0 [TSP]TA_probe MXT224E T48 Byte2 is 82
858
[    3.542213] c0 [TSP]TA_probe MXT224E T48 Byte2 is 114
859
[    3.546005] c0 sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
860
[    3.546299] c0 max8997-charger max8997-charger: max8997_disable_charging: disable charging
861
[    3.546990] c0 max8922-charger max8922-charger: max8922_enable_charging: enable charging,USB
862
[    3.547810] c0 max8997-muic max8997-muic: switch_to_ap_usb
863
[    3.547943] c0 max8997-muic max8997-muic: set_accdet(en) cntl2(0x20)
864
[    3.583272] c0 e2fsck: e2fsck 1.42.9 (28-Dec-2013)
865
[    3.583354] c0 
866
[    3.583529] c0 e2fsck: /dev/block/mmcblk0p10: clean, 839/131072 files, 80212/524284 blocks
867
[    3.583656] c0 
868
[    3.601002] c0 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,journal_async_commit,errors=panic
869
[    3.601265] c0 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
870
[    3.601618] c0 fs_mgr: __mount(source=/dev/block/mmcblk0p10,target=/data,type=ext4)=0
871
[    3.601831] c0 fs_mgr: mount_with_alternatives(): Mounted /dev/block/mmcblk0p10 on /data with fs_type=ext4 instead of f2fs
872
[    3.833048] c1 EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: journal_async_commit
873
[    3.833253] c1 SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
874
[    3.833527] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p12,target=/preload,type=ext4)=0
875
[    3.840646] c1 zram0: detected capacity change from 0 to 268435456
876
[    3.850243] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
877
[    3.855441] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
878
[    3.856424] c0 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=883
879
[    3.856631] c0 sec-battery sec-battery: Time past : 0 secs
880
[    3.856773] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
881
[    3.856976] c0 sec-battery sec-battery: soc(91), vfocv(4069), vcell(4113), temp(29), charging(1), health(1), chg_adc(0)
882
[    4.006460] c1 Adding 262140k swap on /dev/block/zram0.  Priority:-1 extents:1 across:262140k SS
883
[    4.035977] c1 init: Starting service 'logd'...
884
[    4.112391] c1 init: (Loading properties from /system/build.prop took 0.05s.)
885
[    4.112829] c1 init: (Loading properties from /vendor/build.prop took 0.00s.)
886
[    4.113157] c1 init: (Loading properties from /factory/factory.prop took 0.00s.)
887
[    4.125893] c0 init: Starting service 'vold'...
888
[    4.133673] c0 init: Not bootcharting.
889
[    4.253563] c1 logd.auditd: start
890
[    4.253734] c1 logd.klogd: 4253648461
891
[    4.628006] c0 init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...
892
[    4.635839] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
893
[    4.636501] c1 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=894
894
[    4.636601] c1 sec-battery sec-battery: Time past : 1 secs
895
[    4.636677] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
896
[    4.636777] c1 sec-battery sec-battery: soc(91), vfocv(4069), vcell(4113), temp(29), charging(1), health(1), chg_adc(0)
897
[    4.721718] c0 init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 1888) exited with status 0
898
[    4.737501] c1 i2c-core: driver [Si4709] using legacy suspend method
899
[    4.737533] c1 i2c-core: driver [Si4709] using legacy resume method
900
[    4.755999] c1 mdnie mdnie: scenario_store :: value=0
901
[    4.756033] c1 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
902
[    4.756119] c1 mdnie mdnie: mode_store :: value=1
903
[    4.756146] c1 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
904
[    4.758322] c1 init: Starting service 'sysinit'...
905
[    4.759004] c1 init: (Loading properties from /data/local.prop took 0.00s.)
906
[    4.856070] c1 init: Starting service 'logd-reinit'...
907
[    4.860873] c1 init: Starting service 'healthd'...
908
[    4.862031] c1 init: Starting service 'lmkd'...
909
[    4.863116] c1 init: Starting service 'servicemanager'...
910
[    4.864054] c1 init: Starting service 'surfaceflinger'...
911
[    4.865009] c1 init: property_set("ro.nfc.port", "I2C") failed
912
[    4.872060] c0 binder: 1943:1943 transaction failed 29189, size 0-0
913
[    4.876671] c1 init: using deprecated syntax for specifying property 'ro.manufacturer', use ${name} instead
914
[    4.895163] c1 init: property 'ro.manufacturer' doesn't exist while expanding '$ro.manufacturer'
915
[    4.919587] c1 logd.daemon: reinit
916
[    4.920145] c1 init: cannot expand '$ro.manufacturer' while writing to '/sys/class/android_usb/android0/iManufacturer'
917
[    4.935902] c0 init: Service 'logd-reinit' (pid 1942) exited with status 0
918
[    4.936242] c0 init: using deprecated syntax for specifying property 'ro.model', use ${name} instead
919
[    4.944659] c0 init: property 'ro.model' doesn't exist while expanding '$ro.model'
920
[    4.951922] c0 init: cannot expand '$ro.model' while writing to '/sys/class/android_usb/android0/iProduct'
921
[    4.962922] c0 init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
922
[    4.975614] c0 init: SELinux: Could not get canonical path /sys/block/sda/queue/scheduler restorecon: No such file or directory.
923
[    4.986981] c1 init: SELinux: Could not get canonical path /sys/block/sde/queue/scheduler restorecon: No such file or directory.
924
[    5.002968] c0 init: SELinux: Could not get canonical path /sys/block/dm-0/queue/scheduler restorecon: No such file or directory.
925
[    5.016035] c0 init: write_file: Unable to open '/proc/sys/kernel/perf_event_paranoid': No such file or directory
926
[    5.016129] c0 init: Starting service 'console'...
927
[    5.018460] c0 init: Starting service 'netd'...
928
[    5.019816] c0 init: Starting service 'debuggerd'...
929
[    5.024838] c0 init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
930
[    5.034909] c1 init: Starting service 'ril-daemon'...
931
[    5.036158] c1 init: Starting service 'drm'...
932
[    5.037317] c1 init: Starting service 'media'...
933
[    5.040227] c1 init: Starting service 'installd'...
934
[    5.041329] c1 init: Starting service 'keystore'...
935
[    5.049126] c1 init: Starting service 'macloader'...
936
[    5.050582] c1 init: Starting service 'zygote'...
937
[    5.054096] c1 init: Starting service 'gatekeeperd'...
938
[    5.066029] c1 init: Starting service 'perfprofd'...
939
[    5.067195] c1 usb: enable_store enabled=0, !dev->enabled=1
940
[    5.067237] c1 usb: usb_gadget_disconnect
941
[    5.067435] c1 init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
942
[    5.096816] c1 usb: functions_store buff=mtp,adb
943
[    5.096854] c1 usb: android_enable_function name=mtp
944
[    5.096887] c1 usb: android_enable_function name=adb
945
[    5.097003] c1 usb: enable_store enabled=1, !dev->enabled=1
946
[    5.097043] c1 usb: enable_store vendor=4e8,product=6860,bcdDevice=226
947
[    5.097083] c1 ,Class=0,SubClass=0,Protocol=0
948
[    5.097111] c1 usb: enable_store next cmd : usb_add_config
949
[    5.097263] c1 init: Starting service 'adbd'...
950
[    5.101882] c1 init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
951
[    5.140219] c1 adb_open
952
[    5.140265] c1 usb: android_bind_enabled_functions f:mtp
953
[    5.140300] c1 mtp_bind_config
954
[    5.140331] c1 usb: usb_string_id cdev(0xe43112a0)->next_string_id=1
955
[    5.140390] c1 usb: android_bind_enabled_functions f:adb
956
[    5.140418] c1 adb_bind_config
957
[    5.140452] c1 usb: usb_gadget_connect
958
[    5.142252] c1 init: Service 'sysinit' (pid 1938) exited with status 0
959
[    5.143530] c1 init: Service 'macloader' (pid 1961) exited with status 0
960
[    5.314447] c0 mif: misc_open: iod = umts_boot0
961
[    5.318765] c0 mif: usb_init_communication: 1956:rild
962
[    5.318921] c0 mif: xmm6260_off: xmm6260_off()
963
[    5.318957] c0 mif: link_pm_ioctl: 6f30
964
[    5.319126] c0 store_ehci_power: EHCI turns off
965
[    5.319160] c0 s5p-ehci s5p-ehci: remove, state 4
966
[    5.319221] c0 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xb0/0x150
967
[    5.357568] c0 s5p-ehci s5p-ehci: USB bus 1 deregistered
968
[    5.357817] c0 CP not ready, Active State low
969
[    5.410185] c0 mif: link_pm_ioctl: 6f31
970
[    5.410284] c0 mif: xmm6260_on: xmm6260_on()
971
[    5.586129] c0 s3cfb s3cfb.0: [fb0] Alloc dma: 0x7172a000, size: 0x00177000
972
[    5.586195] c0 s3cfb s3cfb.0: [fb1] Alloc dma: 0x718a1000, size: 0x00177000
973
[    5.586286] c0 s3c-fimc1: FIMC1 1 opened.
974
[    5.590335] c1 init: Starting service 'bootanim'...
975
[    5.635251] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
976
[    5.635806] c1 sec-battery sec-battery: sec_bat_check_temper: temp=280, adc=896
977
[    5.635848] c1 sec-battery sec-battery: Time past : 2 secs
978
[    5.635883] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
979
[    5.635923] c1 sec-battery sec-battery: soc(91), vfocv(4069), vcell(4113), temp(28), charging(1), health(1), chg_adc(0)
980
[    5.875862] c0 healthd: wakealarm_init: timerfd_create failed
981
[    5.882414] c0 healthd: fuelgauge: Unknown power supply type
982
[    5.883901] c0 healthd: battery [l=91 v=4113 t=28.0 h=2 st=2] c=0 chg=u 2000-01-01 00:30:04.767584501 UTC
983
[    5.965112] c0 mif: link_pm_ioctl: 6f30
984
[    5.965272] c0 store_ehci_power: EHCI turns on
985
[    5.965318] c0 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x154/0x5bc): 
986
[    5.965353] c0 [MODEM_IF]Slave Wake
987
[    5.965375] c0 mif: set hsic lpa phy init: slave wake-up (1)
988
[    5.965405] c0 s5p-ehci s5p-ehci: usb phy usage(2)
989
[    5.965574] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
990
[    5.970771] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
991
[    5.970915] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
992
[    5.980080] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
993
[    5.980173] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
994
[    5.980207] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
995
[    5.980242] c0 usb usb1: Product: S5P EHCI Host Controller
996
[    5.980268] c0 usb usb1: Manufacturer: Linux 3.0.101-replicant ehci_hcd
997
[    5.980302] c0 usb usb1: SerialNumber: s5p-ehci
998
[    5.985734] c0 hub 1-0:1.0: USB hub found
999
[    5.985769] c0 hub 1-0:1.0: 3 ports detected
1000
[    5.995228] c0 [MODEM_IF]Active States =1, s5p-ehci
1001
[    6.048925] c0 mif: link_pm_ioctl: 6f31
1002
[    6.049085] c0 mif: link_pm_ioctl: 6f33
1003
[    6.099258] c0 mif: link_pm_ioctl: 6f33
1004
[    6.149418] c0 mif: link_pm_ioctl: 6f33
1005
[    6.199569] c0 mif: link_pm_ioctl: 6f33
1006
[    6.249702] c0 mif: link_pm_ioctl: 6f33
1007
[    6.305130] c0 mif: link_pm_ioctl: 6f33
1008
[    6.305158] c1 usb 1-2: new high speed USB device number 2 using s5p-ehci
1009
[    6.355301] c0 mif: link_pm_ioctl: 6f33
1010
[    6.405430] c0 mif: link_pm_ioctl: 6f33
1011
[    6.441616] c1 usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11
1012
[    6.441668] c1 usb 1-2: New USB device found, idVendor=058b, idProduct=0041
1013
[    6.441701] c1 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1014
[    6.455568] c0 mif: link_pm_ioctl: 6f33
1015
[    6.455740] c1 mif: if_usb_probe: usbdev = 0xe4129400
1016
[    6.455769] c1 mif: if_usb_set_pipe: set 0
1017
[    6.455792] c1 mif: if_usb_probe: devdata usbdev = 0xe4129400
1018
[    6.455860] c1 mif: if_usb_probe: successfully done
1019
[    6.505692] c0 mif: link_pm_ioctl: 6f33
1020
[    6.763958] c1 s3c-fimc0: FIMC0 1 opened.
1021
[    6.764029] c1 fimc_s_input: index 0 FIMC0
1022
[    6.764052] c1 
1023
[    6.764062] c1 
1024
[    6.764071] c1 fimc_s_input activating subdev
1025
[    6.781307] c0 m5mo_isp_isr: **************** interrupt ****************
1026
[    6.781414] c1 m5mo_probe
1027
[    6.781442] c1 fimc_s_input activated subdev = 0
1028
[    6.781905] c1 m5mo_power on
1029
[    6.781925] c1 m5mo_power_on: in. hw=0xE
1030
[    6.795749] c1 m5mo_power_on: out
1031
[    6.795772] c1 s3c_csis_power: in
1032
[    6.796070] c1 s3c_csis_power: out
1033
[    6.907368] c0 m5mo_isp_isr: **************** interrupt ****************
1034
[    6.911440] c0 m5mo_check_version: *************************************
1035
[    6.911475] c0 m5mo_check_version: F/W Version: SCEF02
1036
[    6.911501] c0 m5mo_check_version: Binary Released: May  7 2017 00:33:28
1037
[    6.911535] c0 m5mo_check_version: *************************************
1038
[    6.940077] c0 fimc_s_input--: index 0 FIMC0
1039
[    6.940148] c0 s3c-fimc2: FIMC2 1 opened.
1040
[    6.940195] c0 fimc_s_input: index 0 FIMC2
1041
[    6.940262] c0 fimc_s_input--: index 0 FIMC2
1042
[    6.940293] c0 fimc_g_ext_ctrls_capture++
1043
[    6.940314] c0 fimc_g_ext_ctrls_capture--
1044
[    6.940807] c0 id 37, value 90
1045
[    6.941516] c0 m5mo_set_jpeg_quality: E, value 90
1046
[    6.947356] c0 id 99, value 0
1047
[    6.947425] c0 id 90, value 0
1048
[    6.947447] c0 m5mo_set_zoom: E, value 0
1049
[    6.947848] c0 id 71, value 1
1050
[    6.947872] c0 m5mo_set_flash: E, value 1
1051
[    6.948568] c0 id 72, value 0
1052
[    6.948589] c0 m5mo_set_exposure: E, value 0
1053
[    6.948934] c0 id 73, value 1
1054
[    6.948952] c0 m5mo_set_whitebalance: E, value 1
1055
[    6.949598] c0 id 70, value 1
1056
[    6.949620] c0 m5mo_set_scene_mode: E, value 1
1057
[    6.950262] c0 m5mo_set_saturation: E, value 2
1058
[    6.951599] c0 m5mo_set_sharpness: E, value 2
1059
[    6.957071] c0 id 74, value 1
1060
[    6.957094] c0 m5mo_set_effect: E, value 1
1061
[    6.958901] c0 id 75, value 0
1062
[    6.958938] c0 m5mo_set_iso: E, value 0
1063
[    6.970604] c0 m5mo_set_mode: 0x1 -> 0x2
1064
[    7.003294] c1 m5mo_power down
1065
[    7.003314] c1 m5mo_power_down: in
1066
[    7.020244] c1 s3c_csis_power: in
1067
[    7.020273] c1 s3c_csis_power: out
1068
[    7.022067] c1 s3c-fimc0: fimc_runtime_suspend_cap: No capture device.
1069
[    7.035088] c1 s3c-fimc0: FIMC0 0 released.
1070
[    7.035386] c1 s3c-fimc2: FIMC2 0 released.
1071
[    7.036507] c1 s3c-fimc0: FIMC0 1 opened.
1072
[    7.036575] c1 fimc_s_input: index 1 FIMC0
1073
[    7.036603] c1 
1074
[    7.036614] c1 
1075
[    7.036627] c1 fimc_s_input activating subdev
1076
[    7.059715] c1 [S5K5BAFX] Default preview_width: 640 , preview_height: 480, capture_width: 1600, capture_height: 1200
1077
[    7.059766] c1 S5K5BAFX 12-002d: driver probed!!
1078
[    7.059800] c1 fimc_s_input activated subdev = 1
1079
[    7.060224] c1 fimc_s_input--: index 1 FIMC0
1080
[    7.060294] c1 s3c-fimc2: FIMC2 1 opened.
1081
[    7.060341] c1 fimc_s_input: index 1 FIMC2
1082
[    7.060385] c1 fimc_s_input--: index 1 FIMC2
1083
[    7.060417] c1 fimc_g_ext_ctrls_capture++
1084
[    7.060439] c1 fimc_g_ext_ctrls_capture--
1085
[    7.060883] c1 [S5K5BAFX] s_ctrl: id = 37, value=90
1086
[    7.060909] c1 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
1087
[    7.061044] c1 [S5K5BAFX] s_ctrl: id = 99, value=7
1088
[    7.061070] c1 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
1089
[    7.061184] c1 [S5K5BAFX] s_ctrl: id = 72, value=0
1090
[    7.061207] c1 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
1091
[    7.061275] c1 [S5K5BAFX] s_ctrl: id = 70, value=1
1092
[    7.061300] c1 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
1093
[    7.061365] c1 [S5K5BAFX] s_ctrl: id = 75, value=0
1094
[    7.061388] c1 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
1095
[    7.063667] c1 [S5K5BAFX] s_ctrl: id = 71, value=1
1096
[    7.063694] c1 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
1097
[    7.064321] c1 S5K5BAFX 12-002d: driver removed!!
1098
[    7.071529] c1 s5k5bafx_power(): down
1099
[    7.072726] c1 s3c_csis_power: in
1100
[    7.072752] c1 s3c_csis_power: out
1101
[    7.072790] c1 s3c-fimc0: fimc_runtime_suspend_cap: No capture device.
1102
[    7.085100] c1 s3c-fimc0: FIMC0 0 released.
1103
[    7.085378] c1 s3c-fimc2: FIMC2 0 released.
1104
[    7.532408] c1 hub 1-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
1105
[    7.540147] c0 usb 1-2: USB disconnect, device number 2 by hub_thread+0xf08/0x119c
1106
[    7.540339] c0 mif: if_usb_disconnect: 
1107
[    7.540505] c0 mif: if_usb_disconnect: put dev 0xe4129400
1108
[    7.541059] c0 mif: if_usb_disconnect: 
1109
[    7.556183] c0 mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0
1110
[    7.556236] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 3)
1111
[    7.563506] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 3)
1112
[    7.572301] c0 mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0
1113
[    7.572354] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 3)
1114
[    7.580946] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 3)
1115
[    7.761036] c1 mif: link_pm_ioctl: 6f32
1116
[    7.790144] c0 usb 1-2: new high speed USB device number 3 using s5p-ehci
1117
[    7.811188] c1 mif: link_pm_ioctl: 6f32
1118
[    7.856570] c0 s5p-ehci s5p-ehci: port 2 reset error -110
1119
[    7.861326] c1 mif: link_pm_ioctl: 6f32
1120
[    7.911464] c1 mif: link_pm_ioctl: 6f32
1121
[    7.961608] c1 mif: link_pm_ioctl: 6f32
1122
[    8.011743] c1 mif: link_pm_ioctl: 6f32
1123
[    8.061898] c1 mif: link_pm_ioctl: 6f32
1124
[    8.112055] c1 mif: link_pm_ioctl: 6f32
1125
[    8.162200] c1 mif: link_pm_ioctl: 6f32
1126
[    8.212333] c1 mif: link_pm_ioctl: 6f32
1127
[    8.262571] c1 mif: link_pm_ioctl: 6f30
1128
[    8.262738] c1 store_ehci_power: EHCI turns off
1129
[    8.262770] c1 s5p-ehci s5p-ehci: remove, state 1
1130
[    8.262837] c1 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xb0/0x150
1131
[    8.325116] c0 hub 1-0:1.0: hub_port_status failed (err = -19)
1132
[    8.329523] c0 hub 1-0:1.0: cannot disable port 2 (err = -19)
1133
[    8.340959] c1 hub 1-0:1.0: cannot reset port 2 (err = -19)
1134
[    8.346060] c1 hub 1-0:1.0: cannot disable port 2 (err = -19)
1135
[    8.353996] c1 hub 1-0:1.0: cannot reset port 2 (err = -19)
1136
[    8.358201] c1 hub 1-0:1.0: cannot disable port 2 (err = -19)
1137
[    8.364815] c1 hub 1-0:1.0: cannot reset port 2 (err = -19)
1138
[    8.370466] c1 hub 1-0:1.0: cannot disable port 2 (err = -19)
1139
[    8.376211] c1 hub 1-0:1.0: unable to enumerate USB device on port 2
1140
[    8.381504] c1 hub 1-0:1.0: cannot disable port 2 (err = -19)
1141
[    8.412004] c1 s5p-ehci s5p-ehci: USB bus 1 deregistered
1142
[    8.412321] c1 [MODEM_IF]Active States =0, s5p-ehci
1143
[    8.466447] c0 mif: link_pm_ioctl: 6f31
1144
[    8.466482] c0 mif: link_pm_ioctl: 6f32
1145
[    8.466602] c0 mif: link_pm_ioctl: 6f30
1146
[    8.466724] c0 store_ehci_power: EHCI turns on
1147
[    8.466781] c0 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x154/0x5bc): 
1148
[    8.466829] c0 mif: set hsic lpa phy init: slave wake-up (1)
1149
[    8.466865] c0 s5p-ehci s5p-ehci: usb phy usage(2)
1150
[    8.467056] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
1151
[    8.468372] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
1152
[    8.468533] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
1153
[    8.475179] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
1154
[    8.475303] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1155
[    8.475349] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1156
[    8.475396] c0 usb usb1: Product: S5P EHCI Host Controller
1157
[    8.475432] c0 usb usb1: Manufacturer: Linux 3.0.101-replicant ehci_hcd
1158
[    8.475474] c0 usb usb1: SerialNumber: s5p-ehci
1159
[    8.482268] c0 hub 1-0:1.0: USB hub found
1160
[    8.482317] c0 hub 1-0:1.0: 3 ports detected
1161
[    8.482708] c0 [MODEM_IF]Active States =1, s5p-ehci
1162
[    8.536474] c0 mif: link_pm_ioctl: 6f31
1163
[    8.536519] c0 mif: link_pm_ioctl: 6f33
1164
[    8.586674] c0 mif: link_pm_ioctl: 6f33
1165
[    8.636807] c0 mif: link_pm_ioctl: 6f33
1166
[    8.686938] c0 mif: link_pm_ioctl: 6f33
1167
[    8.737080] c0 mif: link_pm_ioctl: 6f33
1168
[    8.787208] c0 mif: link_pm_ioctl: 6f33
1169
[    8.790082] c1 usb 1-2: new high speed USB device number 2 using s5p-ehci
1170
[    8.837578] c0 mif: link_pm_ioctl: 6f33
1171
[    8.887725] c0 mif: link_pm_ioctl: 6f33
1172
[    8.927991] c0 usb 1-2: New USB device found, idVendor=1519, idProduct=0020
1173
[    8.928056] c0 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1174
[    8.928114] c0 usb 1-2: Product: HSIC Device
1175
[    8.928149] c0 usb 1-2: Manufacturer: Comneon
1176
[    8.928190] c0 usb 1-2: SerialNumber: 0123456789
1177
[    8.940194] c0 mif: link_pm_ioctl: 6f33
1178
[    8.948410] c0 mif: if_usb_probe: usbdev = 0xe4241000
1179
[    8.948460] c0 mif: if_usb_set_pipe: set 0
1180
[    8.948498] c0 mif: if_usb_probe: devdata usbdev = 0xe4241000
1181
[    8.948664] c0 mif: if_usb_probe: successfully done
1182
[    8.967306] c0 mif: if_usb_probe: usbdev = 0xe4241000
1183
[    8.967350] c0 mif: if_usb_set_pipe: set 1
1184
[    8.967381] c0 mif: if_usb_probe: devdata usbdev = 0xe4241000
1185
[    8.967464] c0 mif: if_usb_probe: successfully done
1186
[    8.971969] c1 mif: if_usb_probe: usbdev = 0xe4241000
1187
[    8.972012] c1 mif: if_usb_set_pipe: set 2
1188
[    8.972041] c1 mif: if_usb_probe: devdata usbdev = 0xe4241000
1189
[    8.972127] c1 mif: if_usb_probe: successfully done
1190
[    8.975502] c1 mif: if_usb_probe: usbdev = 0xe4241000
1191
[    8.975554] c1 mif: if_usb_set_pipe: set 3
1192
[    8.975588] c1 mif: if_usb_probe: devdata usbdev = 0xe4241000
1193
[    8.975695] c1 mif: link_pm_change_modem_state: set modem state 4 by if_usb_probe+0x46c/0x4b4
1194
[    8.982881] c1 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 4)
1195
[    8.991567] c0 mif: link_pm_ioctl: 6f33
1196
[    8.992292] c1 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 4)
1197
[    9.000364] c1 mif: if_usb_probe: successfully done
1198
[    9.041787] c0 mif: link_pm_ioctl: 6f33
1199
[    9.351338] c0 mif: misc_release: iod = umts_boot0
1200
[    9.355680] c0 mif: misc_open: iod = umts_ipc0
1201
[    9.359111] c0 mif: usb_init_communication: 1956:rild
1202
[    9.359140] c0 mif: start_ipc: send 'a'
1203
[    9.365157] c0 mif: misc_open: iod = umts_rfs0
1204
[    9.367420] c1 mif: IPC-RX(129): 7f 0a 00 00 07 00 ff ff 01 01 03 7e 7f 1a 00 00 ...
1205
[    9.368142] c0 mif: usb_init_communication: 1956:rild
1206
[    9.445062] c1 mif: link_pm_runtime_start: rpm_status: 0
1207
[    9.445095] c1 mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
1208
[    9.577373] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1209
[    9.577424] c0 mif: link_pm_runtime_work: rpm_states=3
1210
[    9.620784] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1211
[    9.670081] c0 mif: usb_port_resume: 1283, 4
1212
[    9.882446] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1213
[    9.882534] c0 mif: link_pm_runtime_work: rpm_states=3
1214
[    9.925747] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1215
[    9.980048] c0 mif: usb_port_resume: 1283, 4
1216
[   10.187380] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1217
[   10.187438] c1 mif: link_pm_runtime_work: rpm_states=3
1218
[   10.230694] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1219
[   10.280132] c1 mif: usb_port_resume: 1283, 4
1220
[   10.487217] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1221
[   10.487274] c1 mif: link_pm_runtime_work: rpm_states=3
1222
[   10.530656] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1223
[   10.580080] c1 mif: usb_port_resume: 1283, 4
1224
[   10.787218] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1225
[   10.787273] c1 mif: link_pm_runtime_work: rpm_states=3
1226
[   10.830638] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1227
[   10.882435] c1 max17042 9-0036: max17042_get_soc : soc(58e5)
1228
[   10.882466] c1 max17042_need_soc_recal: HW(0xe)
1229
[   10.882492] c1 max17042 9-0036: max17042_get_soc : use raw (88), soc (91)
1230
[   10.883125] c1 mif: usb_port_resume: 1283, 4
1231
[   11.087889] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1232
[   11.088083] c1 mif: link_pm_runtime_work: rpm_states=3
1233
[   11.130674] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1234
[   11.163501] c1 warning: `main' uses 32-bit capabilities (legacy support in use)
1235
[   11.180063] c1 mif: usb_port_resume: 1283, 4
1236
[   11.387626] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1237
[   11.387722] c0 mif: link_pm_runtime_work: rpm_states=3
1238
[   11.430924] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1239
[   11.480171] c0 mif: usb_port_resume: 1283, 4
1240
[   11.660591] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1241
[   11.688395] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1242
[   11.688605] c0 mif: link_pm_runtime_work: rpm_states=3
1243
[   11.730654] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1244
[   11.780079] c0 mif: usb_port_resume: 1283, 4
1245
[   12.095610] c0 s5p-ehci s5p-ehci: host_phy_susp
1246
[   12.133054] c0 mc1n2 6-003a: write 0 = 4b
1247
[   12.133834] c0 mc1n2 6-003a: write 0 = 4b4b
1248
[   12.134431] c0 mc1n2 6-003a: write 0 = 4bcb
1249
[   12.135132] c0 mc1n2 6-003a: write 0 = cbcb
1250
[   12.135723] c0 mc1n2 6-003a: write 1 = 4b
1251
[   12.136560] c0 mc1n2 6-003a: write 1 = 4b4b
1252
[   12.138382] c0 mc1n2 6-003a: write 1 = 4bcb
1253
[   12.140063] c0 mc1n2 6-003a: write 1 = cbcb
1254
[   12.140666] c0 mc1n2 6-003a: write 3 = 4b
1255
[   12.143242] c0 mc1n2 6-003a: write 3 = 4b4b
1256
[   12.144382] c0 mc1n2 6-003a: write 3 = 4bcb
1257
[   12.145068] c0 mc1n2 6-003a: write 3 = cbcb
1258
[   12.145685] c0 mc1n2 6-003a: write 4 = 4b
1259
[   12.146340] c0 mc1n2 6-003a: write 4 = 4b4b
1260
[   12.147020] c0 mc1n2 6-003a: write 4 = 4bcb
1261
[   12.147674] c0 mc1n2 6-003a: write 4 = cbcb
1262
[   12.148353] c0 mc1n2 6-003a: write 5 = 4b
1263
[   12.150192] c0 mc1n2 6-003a: write 5 = 4b4b
1264
[   12.150779] c0 mc1n2 6-003a: write 5 = 4bcb
1265
[   12.151495] c0 mc1n2 6-003a: write 5 = cbcb
1266
[   12.155439] c0 mc1n2 6-003a: write 7 = 4b
1267
[   12.156005] c0 mc1n2 6-003a: write 7 = 4b4b
1268
[   12.156591] c0 mc1n2 6-003a: write 7 = 4bcb
1269
[   12.157150] c0 mc1n2 6-003a: write 7 = cbcb
1270
[   12.157737] c0 mc1n2 6-003a: write 8 = 4b
1271
[   12.158287] c0 mc1n2 6-003a: write 8 = 4b4b
1272
[   12.158872] c0 mc1n2 6-003a: write 8 = 4bcb
1273
[   12.159436] c0 mc1n2 6-003a: write 8 = cbcb
1274
[   12.160058] c0 mc1n2 6-003a: write 9 = 4b
1275
[   12.160619] c0 mc1n2 6-003a: write 9 = 4b4b
1276
[   12.161202] c0 mc1n2 6-003a: write 9 = 4bcb
1277
[   12.161760] c0 mc1n2 6-003a: write 9 = cbcb
1278
[   12.162348] c0 mc1n2 6-003a: write b = 4b
1279
[   12.162909] c0 mc1n2 6-003a: write b = 4b4b
1280
[   12.163494] c0 mc1n2 6-003a: write b = 4bcb
1281
[   12.164050] c0 mc1n2 6-003a: write b = cbcb
1282
[   12.164635] c0 mc1n2 6-003a: write d = 4b
1283
[   12.165249] c0 mc1n2 6-003a: write d = 4b4b
1284
[   12.165838] c0 mc1n2 6-003a: write d = 4bcb
1285
[   12.166400] c0 mc1n2 6-003a: write d = cbcb
1286
[   12.166994] c0 mc1n2 6-003a: write e = 4b
1287
[   12.167545] c0 mc1n2 6-003a: write e = 4b4b
1288
[   12.168129] c0 mc1n2 6-003a: write e = 4bcb
1289
[   12.168684] c0 mc1n2 6-003a: write e = cbcb
1290
[   12.169279] c0 mc1n2 6-003a: write f = 4b
1291
[   12.169846] c0 mc1n2 6-003a: write f = 4b4b
1292
[   12.170487] c0 mc1n2 6-003a: write f = 4bcb
1293
[   12.171074] c0 mc1n2 6-003a: write f = cbcb
1294
[   12.171686] c0 mc1n2 6-003a: write 10 = 4b
1295
[   12.172259] c0 mc1n2 6-003a: write 10 = 4b4b
1296
[   12.174501] c1 mc1n2 6-003a: write 10 = 4bcb
1297
[   12.175098] c1 mc1n2 6-003a: write 10 = cbcb
1298
[   12.175708] c1 mc1n2 6-003a: write 11 = 13
1299
[   12.176286] c1 mc1n2 6-003a: write 11 = 1313
1300
[   12.176907] c1 mc1n2 6-003a: write 11 = 1393
1301
[   12.177486] c1 mc1n2 6-003a: write 11 = 9393
1302
[   12.178923] c1 mc1n2 6-003a: write 17 = 1a
1303
[   12.179540] c1 mc1n2 6-003a: write 17 = 1a1a
1304
[   12.180185] c1 mc1n2 6-003a: write 17 = 1a9a
1305
[   12.180774] c1 mc1n2 6-003a: write 17 = 9a9a
1306
[   12.181545] c1 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
1307
[   12.181584] c1 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
1308
[   12.194254] c1 G:P:DmaAddr=@643c0000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
1309
[   12.194448] c1 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
1310
[   12.194483] c1 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
1311
[   12.221102] c1 mc1n2 6-003a: write 11 = 939a
1312
[   12.225803] c1 mc1n2 6-003a: write 11 = 9a9a
1313
[   12.226469] c1 mc1n2 6-003a: write 1b = 2
1314
[   12.227239] c1 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
1315
[   12.227279] c1 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
1316
[   12.239186] c1 G:C:DmaAddr=@64620000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffda0000
1317
[   12.239957] c1 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
1318
[   12.240006] c1 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
1319
[   12.243304] c1 mc1n2 6-003a: write 11 = 9a93
1320
[   12.243935] c0 mc1n2 6-003a: write 11 = 9393
1321
[   12.244521] c0 mc1n2 6-003a: write 1b = 0
1322
[   13.111354] c1 request_suspend_state: wakeup (3->0) at 13111330841 (2000-01-01 00:30:11.995999255 UTC)
1323
[   13.189538] c1 lcd panel: id=0 brightness=102, bl=4, candela=100
1324
[   15.560076] c0 usb: usb_ready udc_enable=0
1325
[   17.560073] c0 max8997-muic max8997-muic: max8997_muic_usb_detect
1326
[   17.560126] c0 max8997-muic max8997-muic: max8997_muic_usb_detect: usb attach
1327
[   17.560183] c0 otg max8997_muic_usb_cb: usb mode=1
1328
[   17.560224] c0 otg change mode : USB Cable Detached --> USB Cable Attached (0 --> 1) disabled
1329
[   17.560291] c0 usb: s3c_vbus_enable, ready u_e: 0, is_active: 1
1330
[   17.560333] c0 usb: s3c_vbus_enable is_active=1(udc_enable),softconnect=1
1331
[   17.560490] c0 usb: s5p_usb_phy0_tune read original tune
1332
[   17.560526] c0 usb: s5p_usb_phy0_tune save default phytune (0x819b3)
1333
[   17.560568] c0 usb: s5p_usb_phy0_tune original tune=0x819b3
1334
[   17.560606] c0 usb: s5p_usb_phy0_tune tune_mask=0x10380f, tune=0x10280b
1335
[   17.560660] c0 usb: s5p_usb_phy0_tune custom tune=0x1829bb
1336
[   17.560709] c0 usb: s5p_usb_phy0_tune modified tune=0x1829bb
1337
[   17.766240] c0 usb: GET_DES
1338
[   17.766303] c0 usb: android_work config=  (null),connected=1,sw_connected=0
1339
[   17.766974] c0 usb: android_work sent uevent USB_STATE=CONNECTED
1340
[   17.880211] c0 usb: GET_DES
1341
[   17.882963] c0 android_usb gadget: high speed config #1: android
1342
[   17.883014] c0 usb: SET_CON
1343
[   17.883073] c0 usb: android_work config=c10adebc,connected=1,sw_connected=1
1344
[   17.883754] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
1345
[   20.678843] c1 k3dh_open: is called.
1346
[   20.680931] c1 input: acceleration as /devices/virtual/input/input8
1347
[   20.692915] c1 healthd: fuelgauge: Unknown power supply type
1348
[   20.694214] c1 healthd: battery [l=91 v=4113 t=28.0 h=2 st=2] c=0 chg=u 2000-01-01 00:30:19.578778467 UTC
1349
[   20.860168] c1 [TSP] sec_touchscreen_enable
1350
[   20.860862] c0 [TSP] Calibration!!!!!!
1351
[   20.867868] c0 [TSP] Calibration End!!!!!!
1352
[   20.880096] c1 [TSP] sec_touchscreen_disable
1353
[   20.902740] c1 max17042 9-0036: max17042_get_soc : soc(58e5)
1354
[   20.902786] c1 max17042_need_soc_recal: HW(0xe)
1355
[   20.902825] c1 max17042 9-0036: max17042_get_soc : use raw (88), soc (91)
1356
[   21.046277] c1 k3dh_close: is called.
1357
[   21.054095] c0 input: magnetic as /devices/virtual/input/input9
1358
[   21.581571] c0 lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
1359
[   21.581639] c0 lowmemorykiller: oom_adj 0 => oom_score_adj 0
1360
[   21.581688] c0 lowmemorykiller: oom_adj 1 => oom_score_adj 58
1361
[   21.581736] c0 lowmemorykiller: oom_adj 2 => oom_score_adj 117
1362
[   21.581784] c0 lowmemorykiller: oom_adj 3 => oom_score_adj 176
1363
[   21.581832] c0 lowmemorykiller: oom_adj 9 => oom_score_adj 529
1364
[   21.581880] c0 lowmemorykiller: oom_adj 15 => oom_score_adj 1000
1365
[   21.583506] c0 init: write_file: Unable to open '/proc/sys/vm/extra_free_kbytes': No such file or directory
1366
[   21.605291] c1 [TSP] sec_touchscreen_enable
1367
[   21.680320] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1368
[   22.557490] c0 [TouchKey] BLN_ongoing set to false
1369
[   22.557519] c0 [TouchKey] disable LED from BLN app
1370
[   22.669619] c0 usb: state_show buf=CONFIGURED
1371
[   22.670456] c0 acc_open
1372
[   22.670482] c0 acc_release
1373
[   22.846587] c0 [VIB] vibrator_work: pwm_config duty=28230
1374
[   22.868027] c0 [VIB] vibrator_work: pwm_config duty=28230
1375
[   22.896605] c0 type=1400 audit(946686621.775:4): avc: denied { read } for pid=2306 comm="system_server" name="mode" dev=sysfs ino=5934 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_display:s0 tclass=file permissive=0
1376
[   22.907470] c0 type=1400 audit(946686621.775:5): avc: denied { write } for pid=2306 comm="system_server" name="mode" dev=sysfs ino=5934 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_display:s0 tclass=file permissive=0
1377
[   22.907680] c0 type=1400 audit(946686621.775:6): avc: denied { write } for pid=2306 comm="system_server" name="mode" dev=sysfs ino=5934 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_display:s0 tclass=file permissive=0
1378
[   23.286248] c0 [TouchKey] system calling LED Notification control
1379
[   23.707155] c0 lcd panel: id=0 brightness=54, bl=1, candela=40
1380
[   24.082211] c0 type=1400 audit(946686622.935:7): avc: denied { getattr } for pid=2463 comm="d.process.media" path="/storage/FB28-11F8" dev=tmpfs ino=5277 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
1381
[   24.082484] c0 type=1400 audit(946686622.945:8): avc: denied { getattr } for pid=2463 comm="d.process.media" path="/storage/FB28-11F8" dev=tmpfs ino=5277 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
1382
[   24.097849] c0 type=1400 audit(946686622.945:9): avc: denied { getattr } for pid=2463 comm="d.process.media" path="/storage/FB28-11F8" dev=tmpfs ino=5277 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
1383
[   24.128806] c0 type=1400 audit(946686622.995:10): avc: denied { getattr } for pid=2463 comm="d.process.media" path="/storage/FB28-11F8" dev=tmpfs ino=5277 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
1384
[   24.129069] c0 type=1400 audit(946686622.995:11): avc: denied { getattr } for pid=2463 comm="d.process.media" path="/storage/FB28-11F8" dev=tmpfs ino=5277 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
1385
[   24.129282] c0 type=1400 audit(946686622.995:12): avc: denied { getattr } for pid=2463 comm="d.process.media" path="/storage/FB28-11F8" dev=tmpfs ino=5277 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
1386
[   24.133724] c0 type=1400 audit(946686623.010:13): avc: denied { getattr } for pid=2463 comm="d.process.media" path="/storage/FB28-11F8" dev=tmpfs ino=5277 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
1387
[   24.134053] c0 type=1400 audit(946686623.010:14): avc: denied { getattr } for pid=2463 comm="d.process.media" path="/storage/FB28-11F8" dev=tmpfs ino=5277 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
1388
[   24.174370] c0 mtp_open
1389
[   25.600159] c0 max8997-muic max8997-muic: max8997_muic_mhl_detect
1390
[   28.097995] c1 binder: 2306:2314 refcount change on invalid ref 99
1391
[   28.373202] c1 SELinux: initialized (dev mmcblk0p11, type vfat), uses genfs_contexts
1392
[   28.397674] c1 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
1393
[   28.399080] c1 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
1394
[   28.405641] c1 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
1395
[   28.778219] c1 SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
1396
[   28.865315] c0 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
1397
[   28.869371] c0 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
1398
[   28.875224] c1 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
1399
[   29.490951] c1 mif: link_pm_slave_wake: gpio [SWK] set [1]
1400
[   29.500397] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1401
[   29.506536] c1 s5p-ehci s5p-ehci: host_phy_resume
1402
[   29.542289] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1403
[   29.585193] c1 mif: usb_port_resume: 1283, 4
1404
[   29.586557] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 01 ff 01 07 01 01 00 7e
1405
[   29.588457] c1 mif: IPC-RX(30): 7f 0f 00 00 0c 00 ff 01 80 01 02 01 07 01 00 80 ...
1406
[   29.900695] c1 s5p-ehci s5p-ehci: host_phy_susp
1407
[   30.240321] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=380
1408
[   30.322518] c0 s3c-fimc0: FIMC0 1 opened.
1409
[   30.322585] c0 fimc_s_input: index 0 FIMC0
1410
[   30.322616] c0 
1411
[   30.322627] c0 
1412
[   30.322637] c0 fimc_s_input activating subdev
1413
[   30.346197] c0 m5mo_probe
1414
[   30.346242] c0 fimc_s_input activated subdev = 0
1415
[   30.346682] c0 m5mo_power on
1416
[   30.346703] c0 m5mo_power_on: in. hw=0xE
1417
[   30.376740] c0 m5mo_power_on: out
1418
[   30.376768] c0 s3c_csis_power: in
1419
[   30.377752] c0 s3c_csis_power: out
1420
[   30.495835] c0 m5mo_isp_isr: **************** interrupt ****************
1421
[   30.500452] c0 m5mo_check_version: *************************************
1422
[   30.500495] c0 m5mo_check_version: F/W Version: SCEF02
1423
[   30.500524] c0 m5mo_check_version: Binary Released: May  7 2017 00:33:28
1424
[   30.500563] c0 m5mo_check_version: *************************************
1425
[   30.514820] c0 fimc_s_input--: index 0 FIMC0
1426
[   30.514915] c0 s3c-fimc2: FIMC2 1 opened.
1427
[   30.514965] c0 fimc_s_input: index 0 FIMC2
1428
[   30.515100] c0 fimc_s_input--: index 0 FIMC2
1429
[   30.515139] c0 fimc_g_ext_ctrls_capture++
1430
[   30.515167] c0 fimc_g_ext_ctrls_capture--
1431
[   30.515977] c0 id 37, value 90
1432
[   30.515998] c0 m5mo_set_jpeg_quality: E, value 90
1433
[   30.520655] c0 id 99, value 0
1434
[   30.520716] c0 id 90, value 0
1435
[   30.520737] c0 m5mo_set_zoom: E, value 0
1436
[   30.521816] c0 id 71, value 1
1437
[   30.521874] c0 m5mo_set_flash: E, value 1
1438
[   30.522870] c0 id 72, value 0
1439
[   30.522894] c0 m5mo_set_exposure: E, value 0
1440
[   30.523404] c0 id 73, value 1
1441
[   30.523429] c0 m5mo_set_whitebalance: E, value 1
1442
[   30.524944] c0 id 70, value 1
1443
[   30.524967] c0 m5mo_set_scene_mode: E, value 1
1444
[   30.526531] c0 m5mo_set_saturation: E, value 2
1445
[   30.527691] c0 m5mo_set_sharpness: E, value 2
1446
[   30.530613] c0 id 74, value 1
1447
[   30.530648] c0 m5mo_set_effect: E, value 1
1448
[   30.532306] c1 id 75, value 0
1449
[   30.532326] c1 m5mo_set_iso: E, value 0
1450
[   30.535884] c1 m5mo_set_mode: 0x1 -> 0x2
1451
[   30.560939] c0 m5mo_power down
1452
[   30.560965] c0 m5mo_power_down: in
1453
[   30.587289] c0 s3c_csis_power: in
1454
[   30.587322] c0 s3c_csis_power: out
1455
[   30.594944] c0 s3c-fimc0: fimc_runtime_suspend_cap: No capture device.
1456
[   30.602001] c1 mif: link_pm_slave_wake: gpio [SWK] set [1]
1457
[   30.603961] c0 s3c-fimc0: FIMC0 0 released.
1458
[   30.604444] c0 s3c-fimc2: FIMC2 0 released.
1459
[   30.610881] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1460
[   30.616142] c1 s5p-ehci s5p-ehci: host_phy_resume
1461
[   30.653798] c0 s3c-fimc0: FIMC0 1 opened.
1462
[   30.653871] c0 fimc_s_input: index 1 FIMC0
1463
[   30.653898] c0 
1464
[   30.653910] c0 
1465
[   30.653926] c0 fimc_s_input activating subdev
1466
[   30.655785] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1467
[   30.665701] c0 [S5K5BAFX] Default preview_width: 640 , preview_height: 480, capture_width: 1600, capture_height: 1200
1468
[   30.665769] c0 S5K5BAFX 12-002d: driver probed!!
1469
[   30.665803] c0 fimc_s_input activated subdev = 1
1470
[   30.666229] c0 fimc_s_input--: index 1 FIMC0
1471
[   30.666311] c0 s3c-fimc2: FIMC2 1 opened.
1472
[   30.666368] c0 fimc_s_input: index 1 FIMC2
1473
[   30.666415] c0 fimc_s_input--: index 1 FIMC2
1474
[   30.666447] c0 fimc_g_ext_ctrls_capture++
1475
[   30.666469] c0 fimc_g_ext_ctrls_capture--
1476
[   30.666943] c0 [S5K5BAFX] s_ctrl: id = 37, value=90
1477
[   30.666977] c0 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
1478
[   30.667116] c0 [S5K5BAFX] s_ctrl: id = 99, value=7
1479
[   30.667142] c0 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
1480
[   30.667240] c0 [S5K5BAFX] s_ctrl: id = 72, value=0
1481
[   30.667268] c0 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
1482
[   30.667341] c0 [S5K5BAFX] s_ctrl: id = 70, value=1
1483
[   30.667366] c0 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
1484
[   30.667439] c0 [S5K5BAFX] s_ctrl: id = 75, value=0
1485
[   30.667470] c0 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
1486
[   30.669273] c0 S5K5BAFX 12-002d: driver removed!!
1487
[   30.675234] c0 s5k5bafx_power(): down
1488
[   30.675904] c0 s3c_csis_power: in
1489
[   30.675927] c0 s3c_csis_power: out
1490
[   30.675962] c0 s3c-fimc0: fimc_runtime_suspend_cap: No capture device.
1491
[   30.682273] c0 s3c-fimc0: FIMC0 0 released.
1492
[   30.682550] c0 s3c-fimc2: FIMC2 0 released.
1493
[   30.695107] c1 mif: usb_port_resume: 1283, 4
1494
[   30.696590] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 02 ff 01 07 01 02 02 7e
1495
[   30.707690] c1 binder: 2306:2314 refcount change on invalid ref 212
1496
[   30.708220] c1 mif: IPC-RX(188): 7f 0f 00 00 0c 00 ff 02 80 01 02 01 07 01 00 80 ...
1497
[   30.777021] c0 mif: misc_write: write rfs size = 15
1498
[   30.778220] c1 mif: IPC-TX(13): 7f 0b 00 00 08 00 03 ff 07 01 02 01 7e
1499
[   30.780696] c1 mif: IPC-RX(16): 7f 0e 00 00 0b 00 ff 03 07 01 02 01 00 00 05 7e
1500
[   30.804936] c1 mif: misc_write: write rfs size = 15
1501
[   30.914729] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 04 ff 08 02 02 7e
1502
[   30.916462] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 04 08 02 02 02 7e
1503
[   30.922484] c1 max17042 9-0036: max17042_get_soc : soc(58e5)
1504
[   30.922521] c1 max17042_need_soc_recal: HW(0xe)
1505
[   30.922552] c1 max17042 9-0036: max17042_get_soc : use raw (88), soc (91)
1506
[   31.062752] c1 mif: IPC-TX(13): 7f 0b 00 00 08 00 05 ff 0a 01 02 ff 7e
1507
[   31.064470] c1 mif: IPC-RX(160): 7f 9e 00 00 9b 00 00 05 0a 01 02 1f 49 39 31 30 ...
1508
[   31.070349] c1 mif: IPC-TX(13): 7f 0b 00 00 08 00 06 ff 0a 03 02 01 7e
1509
[   31.072379] c1 mif: IPC-RX(46): 7f 2c 00 00 29 00 00 06 0a 03 02 01 11 33 35 33 ...
1510
[   31.121643] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 07 ff 08 03 02 7e
1511
[   31.123460] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 07 08 03 02 02 04 ff 32 30 ...
1512
[   31.129292] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 08 ff 08 02 02 7e
1513
[   31.130586] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 08 08 02 02 02 7e
1514
[   31.136456] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 09 ff 02 06 02 7e
1515
[   31.138437] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 09 02 06 02 00 7e
1516
[   31.143641] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 0a ff 08 03 02 7e
1517
[   31.145218] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 0a 08 03 02 02 04 ff 32 30 ...
1518
[   31.145616] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 0b ff 08 05 02 ff 03 7e
1519
[   31.147476] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 0b 08 05 02 ff 03 01 00 00 ...
1520
[   31.148672] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 0c ff 08 05 02 ff 02 7e
1521
[   31.148982] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 0d ff 08 02 02 7e
1522
[   31.149434] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 0e ff 05 01 02 7e
1523
[   31.150339] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 0c 08 05 02 ff 02 04 00 00 ...
1524
[   31.151318] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 0d 08 02 02 02 7e
1525
[   31.152588] c1 mif: IPC-RX(14): 7f 0c 00 00 09 00 00 0e 05 01 02 80 00 7e
1526
[   31.153138] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 0f ff 05 01 02 7e
1527
[   31.154726] c1 mif: IPC-RX(14): 7f 0c 00 00 09 00 00 0f 05 01 02 80 00 7e
1528
[   31.155675] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 10 ff 08 03 02 7e
1529
[   31.156044] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 11 ff 08 05 02 ff 03 7e
1530
[   31.157361] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 10 08 03 02 02 04 ff 32 30 ...
1531
[   31.158199] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 11 08 05 02 ff 03 01 00 00 ...
1532
[   31.159426] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 12 ff 08 05 02 ff 02 7e
1533
[   31.160326] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 13 ff 08 02 02 7e
1534
[   31.160660] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 14 ff 08 03 02 7e
1535
[   31.160945] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 12 08 05 02 ff 02 04 00 00 ...
1536
[   31.161729] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 15 ff 08 05 02 ff 03 7e
1537
[   31.162181] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 13 08 02 02 02 7e
1538
[   31.162932] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 14 08 03 02 02 04 ff 32 30 ...
1539
[   31.163410] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 16 ff 08 05 02 ff 02 7e
1540
[   31.164858] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 15 08 05 02 ff 03 01 00 00 ...
1541
[   31.165692] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 16 08 05 02 ff 02 04 00 00 ...
1542
[   31.167613] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 17 ff 08 02 02 7e
1543
[   31.169233] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 17 08 02 02 02 7e
1544
[   31.170944] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 18 ff 08 03 02 7e
1545
[   31.172201] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 18 08 03 02 02 04 ff 32 30 ...
1546
[   31.173367] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 19 ff 08 05 02 ff 03 7e
1547
[   31.174068] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 1a ff 08 05 02 ff 02 7e
1548
[   31.174943] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 19 08 05 02 ff 03 01 00 00 ...
1549
[   31.175689] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 1a 08 05 02 ff 02 04 00 00 ...
1550
[   31.178158] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 1b ff 08 02 02 7e
1551
[   31.179574] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 1b 08 02 02 02 7e
1552
[   31.179725] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 1c ff 08 03 02 7e
1553
[   31.180971] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 1c 08 03 02 02 04 ff 32 30 ...
1554
[   31.181856] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 1d ff 08 05 02 ff 03 7e
1555
[   31.182397] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 1e ff 08 05 02 ff 02 7e
1556
[   31.183307] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 1d 08 05 02 ff 03 01 00 00 ...
1557
[   31.183728] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 1f ff 08 02 02 7e
1558
[   31.184221] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 1e 08 05 02 ff 02 04 00 00 ...
1559
[   31.185105] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 20 ff 08 03 02 7e
1560
[   31.185715] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 1f 08 02 02 02 7e
1561
[   31.186961] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 20 08 03 02 02 04 ff 32 30 ...
1562
[   31.191540] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 21 ff 08 05 02 ff 03 7e
1563
[   31.193103] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 21 08 05 02 ff 03 01 00 00 ...
1564
[   31.194421] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 22 ff 08 05 02 ff 02 7e
1565
[   31.195944] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 22 08 05 02 ff 02 04 00 00 ...
1566
[   31.198587] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 23 ff 08 02 02 7e
1567
[   31.199831] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 23 08 02 02 02 7e
1568
[   31.520295] c1 s5p-ehci s5p-ehci: host_phy_susp
1569
[   31.700347] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1570
[   34.304304] c0 init: Service 'bootanim' (pid 1994) exited with status 0
1571
[   34.442255] c0 [TouchKey] system calling LED Notification control
1572
[   34.551367] c0 lcd panel: acl_set_store - 0, 1
1573
[   34.610007] c0 mdnie mdnie: outdoor_store :: value=0
1574
[   34.615144] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
1575
[   34.619066] c0 mdnie mdnie: outdoor_store :: value=0
1576
[   34.619100] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
1577
[   34.627747] c0 mdnie mdnie: outdoor_store :: value=0
1578
[   34.627784] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
1579
[   34.643953] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1580
[   34.644132] c0 s5p-ehci s5p-ehci: host_phy_resume
1581
[   34.671547] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1582
[   34.720272] c0 mif: usb_port_resume: 1283, 4
1583
[   34.721221] c1 mif: IPC-RX(95): 7f 0b 00 00 08 00 ff 23 0d 0c 03 00 7e 7f 15 00 ...
1584
[   34.728120] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 24 ff 08 02 02 7e
1585
[   34.729829] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 24 08 02 02 02 7e
1586
[   34.769594] c1 mif: IPC-RX(29): 7f 0e 00 00 0b 00 ff 24 07 01 03 ff 04 00 05 7e ...
1587
[   34.772347] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 25 ff 08 03 02 7e
1588
[   34.773824] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 26 ff 08 05 02 ff 03 7e
1589
[   34.774322] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 25 08 03 02 02 04 04 32 30 ...
1590
[   34.775460] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 26 08 05 02 04 03 01 03 55 ...
1591
[   34.780190] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 27 ff 08 05 02 ff 02 7e
1592
[   34.780526] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 28 ff 08 02 02 7e
1593
[   34.781310] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 29 ff 08 03 02 7e
1594
[   34.781960] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 27 08 05 02 04 02 04 03 55 ...
1595
[   34.782187] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 2a ff 08 05 02 ff 03 7e
1596
[   34.782952] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 28 08 02 02 02 7e
1597
[   34.783925] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 2b ff 08 05 02 ff 02 7e
1598
[   34.784459] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 29 08 03 02 02 04 04 32 30 ...
1599
[   34.785240] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 2a 08 05 02 04 03 01 03 55 ...
1600
[   34.786010] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 2c ff 08 02 02 7e
1601
[   34.787481] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 2b 08 05 02 04 02 04 03 55 ...
1602
[   34.788754] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 08 02 02 02 7e
1603
[   35.100315] c0 s5p-ehci s5p-ehci: host_phy_susp
1604
[   36.058977] c0 mdnie mdnie: scenario_store :: value=0
1605
[   36.059015] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
1606
[   36.062789] c0 mdnie mdnie: negative_store :: value=0, by settings.device
1607
[   39.740972] c0 [TouchKey] system calling LED Notification control
1608
[   40.942491] c1 max17042 9-0036: max17042_get_soc : soc(58e5)
1609
[   40.942525] c1 max17042_need_soc_recal: HW(0xe)
1610
[   40.942550] c1 max17042 9-0036: max17042_get_soc : use raw (88), soc (91)
1611
[   41.720263] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1612
[   42.454515] c0 lcd panel: id=0 brightness=29, bl=0, candela=30
1613
[   44.557413] c0 mdnie mdnie: outdoor_store :: value=0
1614
[   44.557514] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
1615
[   44.631852] c0 request_suspend_state: sleep (0->3) at 44631823023 (2000-01-01 00:30:43.516491479 UTC)
1616
[   44.631991] c0 [TouchKey] sec_touchkey_early_suspend
1617
[   44.633231] c0 sii9234_early_suspend()
1618
[   44.633271] c0 lcd panel: +ld9040_early_suspend
1619
[   44.633304] c0 lcd panel: ld9040_power_off
1620
[   44.851420] c0 lcd panel: -ld9040_early_suspend
1621
[   44.851524] c0 +s3cfb_early_suspend
1622
[   44.864214] c0 s3cfb - disable power domain
1623
[   44.864328] c0 -s3cfb_early_suspend
1624
[   44.864504] c0 sync_system +
1625
[   44.872695] c0 active wake lock sync_system
1626
[   44.872791] c0 active wake lock PowerManagerService.Dreams
1627
[   44.872888] c0 active wake lock PowerManagerService.WakeLocks
1628
[   44.872985] c0 active wake lock usb device wake lock
1629
[   44.873070] c0 active wake lock usb cb wake lock
1630
[   44.873150] c0 active wake lock vbus_present
1631
[   44.940446] c1 sync_system -
1632
[   46.007638] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
1633
[   46.008542] c0 sec-battery sec-battery: sec_bat_check_temper: temp=310, adc=857
1634
[   46.008713] c0 sec-battery sec-battery: Time past : 42 secs
1635
[   46.008834] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
1636
[   46.008988] c0 sec-battery sec-battery: soc(91), vfocv(4068), vcell(3979), temp(31), charging(1), health(1), chg_adc(0)
1637
[   46.014266] c0 healthd: fuelgauge: Unknown power supply type
1638
[   46.019219] c0 healthd: battery [l=91 v=3979 t=31.0 h=2 st=2] c=0 chg=u 2000-01-01 00:30:44.903674845 UTC
1639
[   50.993797] c1 max17042 9-0036: max17042_get_soc : soc(58e5)
1640
[   50.993914] c1 max17042_need_soc_recal: HW(0xe)
1641
[   50.994011] c1 max17042 9-0036: max17042_get_soc : use raw (88), soc (91)
1642
[   51.745675] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1643
[   56.578736] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1644
[   56.579000] c0 s5p-ehci s5p-ehci: host_phy_resume
1645
[   56.613629] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1646
[   56.655214] c0 mif: usb_port_resume: 1283, 4
1647
[   56.656757] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 57 7e
1648
[   56.971273] c1 s5p-ehci s5p-ehci: host_phy_susp
1649
[   61.048801] c1 max17042 9-0036: max17042_get_soc : soc(58e5)
1650
[   61.048909] c1 max17042_need_soc_recal: HW(0xe)
1651
[   61.049004] c1 max17042 9-0036: max17042_get_soc : use raw (88), soc (91)
1652
[   61.116197] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=360
1653
[   61.266272] c0 cpu1 turnning off!
1654
[   61.273348] c1 IRQ112 no longer affine to CPU1
1655
[   61.274152] c0 CPU1: shutdown
1656
[   61.278312] c0 cpu1 off!
1657
[   61.775883] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1658
[   68.275168] c0 cpu1 turning on!
1659
[   68.296247] c1 CPU1: Booted secondary processor
1660
[   68.296279] c1 CPU1: Booted secondary processor
1661
[   68.296361] c1 notifier_call_chain : NOTIFY BAD tick_notify
1662
[   68.300051] c1 Switched to NOHz mode on CPU #1
1663
[   68.302063] c0 cpu1 on
1664
[   70.300518] c0 cpu1 turnning off!
1665
[   70.302015] c1 IRQ112 no longer affine to CPU1
1666
[   70.302826] c0 CPU1: shutdown
1667
[   70.304752] c0 cpu1 off!
1668
[   71.104051] c0 max17042 9-0036: max17042_get_soc : soc(58e5)
1669
[   71.104160] c0 max17042_need_soc_recal: HW(0xe)
1670
[   71.104255] c0 max17042 9-0036: max17042_get_soc : use raw (88), soc (91)
1671
[   71.800840] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1672
[   81.133820] c0 max17042 9-0036: max17042_get_soc : soc(58e5)
1673
[   81.133932] c0 max17042_need_soc_recal: HW(0xe)
1674
[   81.134027] c0 max17042 9-0036: max17042_get_soc : use raw (88), soc (91)
1675
[   81.156039] c0 [TouchKey] system calling LED Notification control
1676
[   81.186201] c0 [TouchKey] touchkey is not enabled. 384
1677
[   81.214297] c0 [keys]PWR 1
1678
[   81.232711] c0 request_suspend_state: wakeup (3->0) at 81232661710 (2000-01-01 00:31:20.117328624 UTC)
1679
[   81.232935] c0 [TouchKey] touchkey is not enabled. 384
1680
[   81.243201] c0 s3cfb s3cfb.0: +s3cfb_late_resume
1681
[   81.243696] c0 s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
1682
[   81.243822] c0 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
1683
[   81.243960] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
1684
[   81.244210] c0 s3cfb s3cfb.0: -s3cfb_late_resume
1685
[   81.244285] c0 lcd panel: +ld9040_late_resume
1686
[   81.244352] c0 lcd panel: ld9040_power_on
1687
[   81.335196] c0 [keys]PWR 0
1688
[   81.449082] c0 lcd panel: id=0 brightness=0, bl=0, candela=30
1689
[   81.449138] c0 lcd panel: -ld9040_late_resume
1690
[   81.449186] c0 sii9234_late_resume()
1691
[   81.551068] c0 lcd panel: id=0 brightness=56, bl=1, candela=40
1692
[   81.565163] c0 [TSP] ta_status is 1
1693
[   81.567016] c0 [TSP] mxt224_ta_probe
1694
[   81.571309] c0 [TSP] Calibration!!!!!!
1695
[   81.575978] c0 [TSP] Calibration End!!!!!!
1696
[   81.611494] c0 [TSP]TA_probe MXT224E T48 Byte2 is 82
1697
[   81.625806] c0 [TSP] Calibration!!!!!!
1698
[   81.631700] c0 [TSP] Calibration End!!!!!!
1699
[   81.634938] c0 [TSP] Calibration!!!!!!
1700
[   81.641416] c0 [TSP]TA_probe MXT224E T48 Byte2 is 114
1701
[   81.645753] c0 [TSP] Calibration End!!!!!!
1702
[   81.649677] c0 [TSP] Calibration!!!!!!
1703
[   81.656233] c0 [TSP] Calibration End!!!!!!
1704
[   81.681263] c0 [TSP] calibration success!!!
1705
[   81.684154] c0 [TouchKey] sec_touchkey_late_resume
1706
[   81.684716] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
1707
[   81.727045] c0 [TSP] Calibration!!!!!!
1708
[   81.735825] c0 LED returned on
1709
[   81.739828] c0 [TSP] Calibration End!!!!!!
1710
[   81.800336] c0 cpu1 turning on!
1711
[   81.820267] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1712
[   81.871357] c1 CPU1: Booted secondary processor
1713
[   81.871381] c1 CPU1: Booted secondary processor
1714
[   81.871453] c1 notifier_call_chain : NOTIFY BAD tick_notify
1715
[   81.872023] c0 cpu1 on
1716
[   81.875110] c1 Switched to NOHz mode on CPU #1
1717
[   82.635458] c0 [TSP] calibration was good
1718
[   82.638644] c0 [TSP] ta_status is 1
1719
[   83.001802] c1 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
1720
[   83.001848] c1 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
1721
[   83.002007] c1 G:P:DmaAddr=@643c0000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
1722
[   83.002528] c1 i2s_txctrl:Turn on
1723
[   83.870577] c0 cpu1 turnning off!
1724
[   83.872358] c1 IRQ112 no longer affine to CPU1
1725
[   83.873154] c0 CPU1: shutdown
1726
[   83.876979] c0 cpu1 off!
1727
[   86.095897] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
1728
[   86.096779] c0 sec-battery sec-battery: sec_bat_check_temper: temp=310, adc=864
1729
[   86.096948] c0 sec-battery sec-battery: Time past : 82 secs
1730
[   86.097069] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
1731
[   86.097228] c0 sec-battery sec-battery: soc(91), vfocv(4069), vcell(4132), temp(31), charging(1), health(1), chg_adc(0)
1732
[   86.104420] c0 healthd: fuelgauge: Unknown power supply type
1733
[   86.107418] c0 healthd: battery [l=91 v=4132 t=31.0 h=2 st=2] c=0 chg=u 2000-01-01 00:31:24.991892082 UTC
1734
[   88.260980] c0 [VIB] vibrator_work: pwm_config duty=28230
1735
[   88.295001] c0 [VIB] vibrator_work: pwm_config duty=28230
1736
[   89.880184] c0 cpu1 turning on!
1737
[   89.901797] c1 CPU1: Booted secondary processor
1738
[   89.901824] c1 CPU1: Booted secondary processor
1739
[   89.901912] c1 notifier_call_chain : NOTIFY BAD tick_notify
1740
[   89.905094] c1 Switched to NOHz mode on CPU #1
1741
[   89.923852] c0 cpu1 on
1742
[   90.920267] c0 [VIB] vibrator_work: pwm_config duty=28230
1743
[   90.942862] c0 [VIB] vibrator_work: pwm_config duty=28230
1744
[   91.162635] c0 max17042 9-0036: max17042_get_soc : soc(58e5)
1745
[   91.162668] c0 max17042_need_soc_recal: HW(0xe)
1746
[   91.162693] c0 max17042 9-0036: max17042_get_soc : use raw (88), soc (91)
1747
[   91.200294] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=340
1748
[   91.462839] c0 i2s_txctrl: Turn Off - spr is no active
1749
[   91.462949] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
1750
[   91.463006] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
1751
[   91.840337] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1752
[   91.920223] c0 cpu1 turnning off!
1753
[   91.928124] c1 IRQ112 no longer affine to CPU1
1754
[   91.928351] c0 CPU1: shutdown
1755
[   91.928877] c0 cpu1 off!
1756
[   92.425124] c0 cpu1 turning on!
1757
[   92.459657] c1 CPU1: Booted secondary processor
1758
[   92.459682] c1 CPU1: Booted secondary processor
1759
[   92.459759] c1 notifier_call_chain : NOTIFY BAD tick_notify
1760
[   92.460055] c1 Switched to NOHz mode on CPU #1
1761
[   92.460606] c0 cpu1 on
1762
[   93.608104] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
1763
[   93.608256] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
1764
[   93.608914] c0 G:P:DmaAddr=@643c0000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
1765
[   93.612488] c0 i2s_txctrl:Turn on
1766
[   96.460469] c0 cpu1 turnning off!
1767
[   96.462004] c1 IRQ112 no longer affine to CPU1
1768
[   96.462800] c0 CPU1: shutdown
1769
[   96.466834] c0 cpu1 off!
1770
[   96.652811] c0 i2s_txctrl: Turn Off - spr is no active
1771
[   96.653045] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
1772
[   96.653162] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
1773
[  100.043970] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1774
[  100.044217] c0 s5p-ehci s5p-ehci: host_phy_resume
1775
[  100.080795] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1776
[  100.120227] c0 mif: usb_port_resume: 1283, 4
1777
[  100.126788] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 59 7e
1778
[  100.441493] c0 s5p-ehci s5p-ehci: host_phy_susp
1779
[  101.229038] c0 max17042 9-0036: max17042_get_soc : soc(58e5)
1780
[  101.229150] c0 max17042_need_soc_recal: HW(0xe)
1781
[  101.229248] c0 max17042 9-0036: max17042_get_soc : use raw (88), soc (91)
1782
[  101.689656] c0 [TouchKey] system calling LED Notification control
1783
[  101.875802] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1784
[  105.168008] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1785
[  105.168249] c0 s5p-ehci s5p-ehci: host_phy_resume
1786
[  105.203600] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1787
[  105.245444] c0 mif: usb_port_resume: 1283, 4
1788
[  105.251064] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 57 7e
1789
[  105.566519] c0 s5p-ehci s5p-ehci: host_phy_susp
1790
[  107.734107] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1791
[  107.734328] c0 s5p-ehci s5p-ehci: host_phy_resume
1792
[  107.769471] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1793
[  107.810446] c0 mif: usb_port_resume: 1283, 4
1794
[  107.816516] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 55 7e
1795
[  108.130580] c0 s5p-ehci s5p-ehci: host_phy_susp
1796
[  111.279035] c0 max17042 9-0036: max17042_get_soc : soc(58e5)
1797
[  111.279148] c0 max17042_need_soc_recal: HW(0xe)
1798
[  111.279243] c0 max17042 9-0036: max17042_get_soc : use raw (88), soc (91)
1799
[  111.925790] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1800
[  117.418348] c0 lcd panel: id=0 brightness=29, bl=0, candela=30
1801
[  118.012355] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1802
[  118.012589] c0 s5p-ehci s5p-ehci: host_phy_resume
1803
[  118.052420] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1804
[  118.090446] c0 mif: usb_port_resume: 1283, 4
1805
[  118.097047] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 53 7e
1806
[  118.410857] c0 s5p-ehci s5p-ehci: host_phy_susp
1807
[  121.280231] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=330
1808
[  121.302508] c0 max17042 9-0036: max17042_get_soc : soc(5908)
1809
[  121.302542] c0 max17042_need_soc_recal: HW(0xe)
1810
[  121.302570] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1811
[  121.965841] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1812
[  123.597936] c0 mdnie mdnie: outdoor_store :: value=0
1813
[  123.597988] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
1814
[  123.601012] c0 request_suspend_state: sleep (0->3) at 123600991020 (2000-01-01 00:32:02.485658976 UTC)
1815
[  123.601131] c0 [TouchKey] sec_touchkey_early_suspend
1816
[  123.603456] c0 sii9234_early_suspend()
1817
[  123.603501] c0 lcd panel: +ld9040_early_suspend
1818
[  123.603535] c0 lcd panel: ld9040_power_off
1819
[  123.825718] c0 lcd panel: -ld9040_early_suspend
1820
[  123.825757] c0 +s3cfb_early_suspend
1821
[  123.842231] c0 s3cfb - disable power domain
1822
[  123.842277] c0 -s3cfb_early_suspend
1823
[  123.842340] c0 sync_system +
1824
[  123.844495] c0 active wake lock sync_system
1825
[  123.844531] c0 active wake lock PowerManagerService.Dreams
1826
[  123.844568] c0 active wake lock usb device wake lock
1827
[  123.844602] c0 active wake lock usb cb wake lock
1828
[  123.844634] c0 active wake lock vbus_present
1829
[  123.869781] c0 sync_system -
1830
[  126.281126] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
1831
[  126.282025] c0 sec-battery sec-battery: sec_bat_check_temper: temp=310, adc=866
1832
[  126.282189] c0 sec-battery sec-battery: Time past : 122 secs
1833
[  126.282308] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
1834
[  126.282464] c0 sec-battery sec-battery: soc(91), vfocv(4070), vcell(4112), temp(31), charging(1), health(1), chg_adc(0)
1835
[  126.287647] c0 healthd: fuelgauge: Unknown power supply type
1836
[  126.295461] c0 healthd: battery [l=91 v=4112 t=31.0 h=2 st=2] c=0 chg=u 2000-01-01 00:32:05.179926604 UTC
1837
[  131.334054] c0 max17042 9-0036: max17042_get_soc : soc(5908)
1838
[  131.334166] c0 max17042_need_soc_recal: HW(0xe)
1839
[  131.334262] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1840
[  132.031973] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1841
[  135.882764] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1842
[  135.883033] c0 s5p-ehci s5p-ehci: host_phy_resume
1843
[  135.918333] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1844
[  135.960445] c0 mif: usb_port_resume: 1283, 4
1845
[  135.966853] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 55 7e
1846
[  136.281306] c0 s5p-ehci s5p-ehci: host_phy_susp
1847
[  141.057348] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1848
[  141.057592] c0 s5p-ehci s5p-ehci: host_phy_resume
1849
[  141.096701] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1850
[  141.135191] c0 mif: usb_port_resume: 1283, 4
1851
[  141.141652] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 57 7e
1852
[  141.384059] c0 max17042 9-0036: max17042_get_soc : soc(5908)
1853
[  141.384168] c0 max17042_need_soc_recal: HW(0xe)
1854
[  141.384264] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1855
[  141.455841] c0 s5p-ehci s5p-ehci: host_phy_susp
1856
[  142.081980] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1857
[  151.380935] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=310
1858
[  151.403780] c0 max17042 9-0036: max17042_get_soc : soc(5908)
1859
[  151.403892] c0 max17042_need_soc_recal: HW(0xe)
1860
[  151.403988] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1861
[  152.130793] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1862
[  161.434042] c0 max17042 9-0036: max17042_get_soc : soc(5908)
1863
[  161.434153] c0 max17042_need_soc_recal: HW(0xe)
1864
[  161.434248] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1865
[  162.180805] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1866
[  166.430995] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
1867
[  166.431864] c0 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=879
1868
[  166.432026] c0 sec-battery sec-battery: Time past : 162 secs
1869
[  166.432147] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
1870
[  166.432303] c0 sec-battery sec-battery: soc(91), vfocv(4070), vcell(4141), temp(29), charging(1), health(1), chg_adc(0)
1871
[  166.437203] c0 healthd: fuelgauge: Unknown power supply type
1872
[  166.444565] c0 healthd: battery [l=91 v=4141 t=29.0 h=2 st=2] c=0 chg=u 2000-01-01 00:32:45.324530497 UTC
1873
[  171.469038] c0 max17042 9-0036: max17042_get_soc : soc(592b)
1874
[  171.469151] c0 max17042_need_soc_recal: HW(0xe)
1875
[  171.469247] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1876
[  172.236985] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1877
[  181.489035] c0 max17042 9-0036: max17042_get_soc : soc(592b)
1878
[  181.489142] c0 max17042_need_soc_recal: HW(0xe)
1879
[  181.489238] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1880
[  181.961845] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1881
[  181.962095] c0 s5p-ehci s5p-ehci: host_phy_resume
1882
[  182.001890] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1883
[  182.040202] c0 mif: usb_port_resume: 1283, 4
1884
[  182.046665] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 55 7e
1885
[  182.245690] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1886
[  182.361352] c0 s5p-ehci s5p-ehci: host_phy_susp
1887
[  191.539049] c0 max17042 9-0036: max17042_get_soc : soc(592b)
1888
[  191.539159] c0 max17042_need_soc_recal: HW(0xe)
1889
[  191.539254] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1890
[  192.285765] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1891
[  201.589012] c0 max17042 9-0036: max17042_get_soc : soc(592b)
1892
[  201.589118] c0 max17042_need_soc_recal: HW(0xe)
1893
[  201.589214] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1894
[  202.335761] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1895
[  206.585993] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
1896
[  206.586875] c0 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=882
1897
[  206.587036] c0 sec-battery sec-battery: Time past : 203 secs
1898
[  206.587158] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
1899
[  206.587311] c0 sec-battery sec-battery: soc(91), vfocv(4071), vcell(4143), temp(29), charging(1), health(1), chg_adc(0)
1900
[  206.592340] c0 healthd: fuelgauge: Unknown power supply type
1901
[  206.599854] c0 healthd: battery [l=91 v=4143 t=29.0 h=2 st=2] c=0 chg=u 2000-01-01 00:33:25.484307087 UTC
1902
[  211.541070] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=290
1903
[  211.644034] c0 max17042 9-0036: max17042_get_soc : soc(594e)
1904
[  211.644144] c0 max17042_need_soc_recal: HW(0xe)
1905
[  211.644239] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1906
[  212.396976] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1907
[  221.699016] c0 max17042 9-0036: max17042_get_soc : soc(594e)
1908
[  221.699122] c0 max17042_need_soc_recal: HW(0xe)
1909
[  221.699217] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1910
[  222.445764] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1911
[  227.430835] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1912
[  227.431087] c0 s5p-ehci s5p-ehci: host_phy_resume
1913
[  227.471875] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1914
[  227.510446] c0 mif: usb_port_resume: 1283, 4
1915
[  227.516657] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 57 7e
1916
[  227.831357] c0 s5p-ehci s5p-ehci: host_phy_susp
1917
[  231.749036] c0 max17042 9-0036: max17042_get_soc : soc(594e)
1918
[  231.749144] c0 max17042_need_soc_recal: HW(0xe)
1919
[  231.749240] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1920
[  232.495780] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1921
[  241.799028] c0 max17042 9-0036: max17042_get_soc : soc(594e)
1922
[  241.799136] c0 max17042_need_soc_recal: HW(0xe)
1923
[  241.799233] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1924
[  242.545828] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1925
[  242.767313] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1926
[  242.767546] c0 s5p-ehci s5p-ehci: host_phy_resume
1927
[  242.803853] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1928
[  242.845600] c0 mif: usb_port_resume: 1283, 4
1929
[  242.851235] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 55 7e
1930
[  243.165806] c0 s5p-ehci s5p-ehci: host_phy_susp
1931
[  246.745998] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
1932
[  246.746885] c0 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=887
1933
[  246.747049] c0 sec-battery sec-battery: Time past : 243 secs
1934
[  246.747169] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
1935
[  246.747324] c0 sec-battery sec-battery: soc(91), vfocv(4073), vcell(4146), temp(29), charging(1), health(1), chg_adc(0)
1936
[  246.752435] c0 healthd: fuelgauge: Unknown power supply type
1937
[  246.760272] c0 healthd: battery [l=91 v=4146 t=29.0 h=2 st=2] c=0 chg=u 2000-01-01 00:34:05.644565251 UTC
1938
[  251.849072] c0 max17042 9-0036: max17042_get_soc : soc(5971)
1939
[  251.849185] c0 max17042_need_soc_recal: HW(0xe)
1940
[  251.849281] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1941
[  252.368175] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1942
[  252.368444] c0 s5p-ehci s5p-ehci: host_phy_resume
1943
[  252.403547] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1944
[  252.445482] c0 mif: usb_port_resume: 1283, 4
1945
[  252.451637] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 53 7e
1946
[  252.561587] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1947
[  252.765696] c0 s5p-ehci s5p-ehci: host_phy_susp
1948
[  261.899033] c0 max17042 9-0036: max17042_get_soc : soc(5971)
1949
[  261.899141] c0 max17042_need_soc_recal: HW(0xe)
1950
[  261.899237] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1951
[  262.596959] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1952
[  267.723957] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1953
[  267.724201] c0 s5p-ehci s5p-ehci: host_phy_resume
1954
[  267.758837] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1955
[  267.800192] c0 mif: usb_port_resume: 1283, 4
1956
[  267.806637] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 55 7e
1957
[  268.121463] c0 s5p-ehci s5p-ehci: host_phy_susp
1958
[  271.695918] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=280
1959
[  271.949041] c0 max17042 9-0036: max17042_get_soc : soc(5971)
1960
[  271.949151] c0 max17042_need_soc_recal: HW(0xe)
1961
[  271.949247] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1962
[  272.646973] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1963
[  281.973980] c0 max17042 9-0036: max17042_get_soc : soc(5971)
1964
[  281.974087] c0 max17042_need_soc_recal: HW(0xe)
1965
[  281.974182] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1966
[  282.695771] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1967
[  285.659313] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1968
[  285.659551] c0 s5p-ehci s5p-ehci: host_phy_resume
1969
[  285.693432] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1970
[  285.735447] c0 mif: usb_port_resume: 1283, 4
1971
[  285.741375] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 57 7e
1972
[  286.055812] c0 s5p-ehci s5p-ehci: host_phy_susp
1973
[  286.896089] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
1974
[  286.896979] c0 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=878
1975
[  286.897145] c0 sec-battery sec-battery: Time past : 283 secs
1976
[  286.897266] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
1977
[  286.897419] c0 sec-battery sec-battery: soc(91), vfocv(4074), vcell(4138), temp(29), charging(1), health(1), chg_adc(0)
1978
[  286.902461] c0 healthd: fuelgauge: Unknown power supply type
1979
[  286.909672] c0 healthd: battery [l=91 v=4138 t=29.0 h=2 st=2] c=0 chg=u 2000-01-01 00:34:45.794142633 UTC
1980
[  288.210565] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1981
[  288.210834] c0 s5p-ehci s5p-ehci: host_phy_resume
1982
[  288.250658] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1983
[  288.290447] c0 mif: usb_port_resume: 1283, 4
1984
[  288.296286] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 59 7e
1985
[  288.611102] c0 s5p-ehci s5p-ehci: host_phy_susp
1986
[  292.004046] c0 max17042 9-0036: max17042_get_soc : soc(5994)
1987
[  292.004153] c0 max17042_need_soc_recal: HW(0xe)
1988
[  292.004249] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
1989
[  292.750794] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1990
[  293.334323] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1991
[  293.334546] c0 s5p-ehci s5p-ehci: host_phy_resume
1992
[  293.368985] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1993
[  293.410216] c0 mif: usb_port_resume: 1283, 4
1994
[  293.416233] c0 mif: IPC-RX(29): 7f 0e 00 00 0b 00 ff 2c 07 01 03 ff 03 00 05 7e ...
1995
[  293.730804] c0 s5p-ehci s5p-ehci: host_phy_susp
1996
[  300.000505] c0 [MSC] sii9234_enqueue_msc_work() add item, addr = 0xd972cec0, cnt=1
1997
[  300.000645] c0 [MSC] sii9234_enqueue_msc_work() command(0xe0), offset(0x31), data_1(0x0), data_2(0x0)
1998
[  300.000789] c0 [MSC] sii9234_enqueue_msc_work() msc work schedule
1999
[  300.000936] c0 sii9234_process_msc_work() - start
2000
[  300.001032] c0 [MSC] sii9234_process_msc_work() command(0xe0), offset(0x31), data_1(0x0), data_2(0x0)
2001
[  300.001178] c0 sii9234_process_msc_work(): msc_req_locked error -2
2002
[  301.019013] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
2003
[  301.019243] c0 s5p-ehci s5p-ehci: host_phy_resume
2004
[  301.053442] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
2005
[  301.095446] c0 mif: usb_port_resume: 1283, 4
2006
[  301.101184] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 5d 7e
2007
[  301.416500] c0 s5p-ehci s5p-ehci: host_phy_susp
2008
[  302.054036] c0 max17042 9-0036: max17042_get_soc : soc(5994)
2009
[  302.054144] c0 max17042_need_soc_recal: HW(0xe)
2010
[  302.054241] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
2011
[  302.800794] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
2012
[  312.104014] c0 max17042 9-0036: max17042_get_soc : soc(5994)
2013
[  312.104121] c0 max17042_need_soc_recal: HW(0xe)
2014
[  312.104218] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
2015
[  312.850757] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
2016
[  313.806908] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
2017
[  313.807135] c0 s5p-ehci s5p-ehci: host_phy_resume
2018
[  313.846842] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
2019
[  313.885444] c0 mif: usb_port_resume: 1283, 4
2020
[  313.891193] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 5f 7e
2021
[  314.205388] c0 s5p-ehci s5p-ehci: host_phy_susp
2022
[  318.929911] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
2023
[  318.930144] c0 s5p-ehci s5p-ehci: host_phy_resume
2024
[  318.969799] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
2025
[  319.010221] c0 mif: usb_port_resume: 1283, 4
2026
[  319.016204] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 5d 7e
2027
[  319.331395] c0 s5p-ehci s5p-ehci: host_phy_susp
2028
[  322.154047] c0 max17042 9-0036: max17042_get_soc : soc(5994)
2029
[  322.154154] c0 max17042_need_soc_recal: HW(0xe)
2030
[  322.154250] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
2031
[  322.900803] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
2032
[  325.475232] c0 cpu1 turning on!
2033
[  325.499199] c1 CPU1: Booted secondary processor
2034
[  325.499231] c1 CPU1: Booted secondary processor
2035
[  325.499320] c1 notifier_call_chain : NOTIFY BAD tick_notify
2036
[  325.500055] c1 Switched to NOHz mode on CPU #1
2037
[  325.504975] c0 cpu1 on
2038
[  327.040273] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
2039
[  327.040808] c0 sec-battery sec-battery: sec_bat_check_temper: temp=280, adc=910
2040
[  327.040859] c0 sec-battery sec-battery: Time past : 323 secs
2041
[  327.040898] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
2042
[  327.040948] c0 sec-battery sec-battery: soc(91), vfocv(4075), vcell(4151), temp(28), charging(1), health(1), chg_adc(0)
2043
[  327.042105] c0 healthd: fuelgauge: Unknown power supply type
2044
[  327.042651] c0 healthd: battery [l=91 v=4151 t=28.0 h=2 st=2] c=0 chg=u 2000-01-01 00:35:25.927272599 UTC
2045
[  327.500200] c0 cpu1 turnning off!
2046
[  327.501681] c1 IRQ112 no longer affine to CPU1
2047
[  327.502499] c0 CPU1: shutdown
2048
[  327.504652] c0 cpu1 off!
2049
[  328.367335] c0 init: Untracked pid 3626 killed by signal 1
2050
[  331.850936] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=290
2051
[  332.204048] c0 max17042 9-0036: max17042_get_soc : soc(59b7)
2052
[  332.204158] c0 max17042_need_soc_recal: HW(0xe)
2053
[  332.204254] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
2054
[  332.950874] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
2055
[  334.581955] c0 adb_release
2056
[  334.582029] c0 usb: usb_gadget_disconnect
2057
[  334.582223] c0 usb: usb_remove_config cdev->config=  (null), config=c10adebc
2058
[  334.592811] c0 mtp_release
2059
[  334.593946] c0 usb: android_work config=  (null),connected=0,sw_connected=1
2060
[  334.600823] c0 init: Untracked pid 3468 killed by signal 1
2061
[  334.601644] c0 init: Service 'adbd' (pid 1969) exited with status 1
2062
[  334.601841] c0 init: Service 'adbd' (pid 1969) killing any children in process group
2063
[  334.603529] c0 init: Starting service 'adbd'...
2064
[  334.605506] c0 usb: android_work sent uevent USB_STATE=DISCONNECTED
2065
[  334.622170] c0 adb_open
2066
[  334.622251] c0 usb: android_bind_enabled_functions f:mtp
2067
[  334.622343] c0 mtp_bind_config
2068
[  334.622504] c0 usb: android_bind_enabled_functions f:adb
2069
[  334.622596] c0 adb_bind_config
2070
[  334.622698] c0 usb: usb_gadget_connect
2071
[  334.847953] c0 usb: GET_DES
2072
[  334.848169] c0 usb: android_work config=  (null),connected=1,sw_connected=0
2073
[  334.866493] c0 usb: android_work sent uevent USB_STATE=CONNECTED
2074
[  334.961573] c0 usb: GET_DES
2075
[  334.964119] c0 android_usb gadget: high speed config #1: android
2076
[  334.964172] c0 usb: SET_CON
2077
[  334.964229] c0 usb: android_work config=c10adebc,connected=1,sw_connected=1
2078
[  334.988714] c0 mtp_open
2079
[  334.994289] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
2080
[  341.970706] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
2081
[  341.970983] c0 s5p-ehci s5p-ehci: host_phy_resume
2082
[  342.009432] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
2083
[  342.050445] c0 mif: usb_port_resume: 1283, 4
2084
[  342.056186] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 5b 7e
2085
[  342.259074] c0 max17042 9-0036: max17042_get_soc : soc(59b7)
2086
[  342.259194] c0 max17042_need_soc_recal: HW(0xe)
2087
[  342.259295] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
2088
[  342.376243] c0 s5p-ehci s5p-ehci: host_phy_susp
2089
[  343.005865] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
2090
[  349.629157] c0 [TouchKey] system calling LED Notification control
2091
[  349.644509] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
2092
[  349.644768] c0 s5p-ehci s5p-ehci: host_phy_resume
2093
[  349.658605] c0 [TouchKey] touchkey is not enabled. 384
2094
[  349.679929] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
2095
[  349.692060] c0 [keys]PWR 1
2096
[  349.704000] c0 request_suspend_state: wakeup (3->0) at 349703938695 (2000-01-01 00:35:48.588604442 UTC)
2097
[  349.704283] c0 [TouchKey] touchkey is not enabled. 384
2098
[  349.714951] c0 s3cfb s3cfb.0: +s3cfb_late_resume
2099
[  349.715637] c0 s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
2100
[  349.720218] c0 mif: usb_port_resume: 1283, 4
2101
[  349.721985] c0 mif: IPC-RX(29): 7f 0e 00 00 0b 00 ff 2c 07 01 03 ff 04 00 05 7e ...
2102
[  349.737233] c0 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
2103
[  349.737428] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
2104
[  349.743210] c0 s3cfb s3cfb.0: -s3cfb_late_resume
2105
[  349.743327] c0 lcd panel: +ld9040_late_resume
2106
[  349.743423] c0 lcd panel: ld9040_power_on
2107
[  349.815143] c0 [keys]PWR 0
2108
[  349.937587] c0 lcd panel: id=0 brightness=0, bl=0, candela=30
2109
[  349.937632] c0 lcd panel: -ld9040_late_resume
2110
[  349.937672] c0 sii9234_late_resume()
2111
[  350.036057] c0 s5p-ehci s5p-ehci: host_phy_susp
2112
[  350.055667] c0 [TSP] ta_status is 1
2113
[  350.057519] c0 [TSP] mxt224_ta_probe
2114
[  350.061632] c0 [TSP] Calibration!!!!!!
2115
[  350.065955] c0 lcd panel: id=0 brightness=52, bl=1, candela=40
2116
[  350.066450] c0 [TSP] Calibration End!!!!!!
2117
[  350.090099] c0 [TSP]TA_probe MXT224E T48 Byte2 is 82
2118
[  350.114306] c0 [TSP] Calibration!!!!!!
2119
[  350.124240] c0 [TSP] Calibration End!!!!!!
2120
[  350.136797] c0 [TSP]TA_probe MXT224E T48 Byte2 is 114
2121
[  350.179654] c0 [TSP] calibration success!!!
2122
[  350.183046] c0 [TSP] Calibration!!!!!!
2123
[  350.186020] c0 [TouchKey] sec_touchkey_late_resume
2124
[  350.189833] c0 [TSP] Calibration End!!!!!!
2125
[  350.193007] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
2126
[  350.255626] c0 LED returned on
2127
[  350.505204] c0 cpu1 turning on!
2128
[  350.583857] c1 CPU1: Booted secondary processor
2129
[  350.583883] c1 CPU1: Booted secondary processor
2130
[  350.583961] c1 notifier_call_chain : NOTIFY BAD tick_notify
2131
[  350.584572] c0 cpu1 on
2132
[  350.585063] c1 Switched to NOHz mode on CPU #1
2133
[  352.282402] c0 max17042 9-0036: max17042_get_soc : soc(59b7)
2134
[  352.282434] c0 max17042_need_soc_recal: HW(0xe)
2135
[  352.282458] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
2136
[  352.580318] c0 cpu1 turnning off!
2137
[  352.582684] c1 IRQ112 no longer affine to CPU1
2138
[  352.582867] c0 CPU1: shutdown
2139
[  352.590422] c0 cpu1 off!
2140
[  353.040263] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
2141
[  353.090233] c0 cpu1 turning on!
2142
[  353.151270] c1 CPU1: Booted secondary processor
2143
[  353.151295] c1 CPU1: Booted secondary processor
2144
[  353.151370] c1 notifier_call_chain : NOTIFY BAD tick_notify
2145
[  353.155104] c1 Switched to NOHz mode on CPU #1
2146
[  353.155680] c0 cpu1 on
2147
[  354.940512] c1 [TouchKey] system calling LED Notification control
2148
[  357.364748] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
2149
[  357.364832] c0 s5p-ehci s5p-ehci: host_phy_resume
2150
[  357.401286] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
2151
[  357.440137] c0 mif: usb_port_resume: 1283, 4
2152
[  357.441375] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 57 7e
2153
[  357.631011] c1 lcd panel: id=0 brightness=29, bl=0, candela=30
2154
[  357.755981] c1 s5p-ehci s5p-ehci: host_phy_susp
2155
[  359.642187] c0 mdnie mdnie: outdoor_store :: value=0
2156
[  359.642226] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
2157
[  359.674074] c1 request_suspend_state: sleep (0->3) at 359674048825 (2000-01-01 00:35:58.558716697 UTC)
2158
[  359.674257] c1 [TouchKey] sec_touchkey_early_suspend
2159
[  359.681115] c1 sii9234_early_suspend()
2160
[  359.681158] c1 lcd panel: +ld9040_early_suspend
2161
[  359.681181] c1 lcd panel: ld9040_power_off
2162
[  359.891459] c1 lcd panel: -ld9040_early_suspend
2163
[  359.891563] c1 +s3cfb_early_suspend
2164
[  359.898601] c1 s3cfb - disable power domain
2165
[  359.898716] c1 -s3cfb_early_suspend
2166
[  359.898871] c1 active wake lock PowerManagerService.Dreams
2167
[  359.898971] c0 sync_system +
2168
[  359.899044] c1 active wake lock usb device wake lock
2169
[  359.899131] c1 active wake lock usb cb wake lock
2170
[  359.899213] c1 active wake lock vbus_present
2171
[  359.937949] c1 sync_system -
2172
[  361.155466] c0 cpu1 turnning off!
2173
[  361.156898] c1 IRQ112 no longer affine to CPU1
2174
[  361.157704] c0 CPU1: shutdown
2175
[  361.161577] c0 cpu1 off!
2176
[  361.946038] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=330
2177
[  362.349050] c0 max17042 9-0036: max17042_get_soc : soc(59b7)
2178
[  362.349159] c0 max17042_need_soc_recal: HW(0xe)
2179
[  362.349255] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
2180
[  363.095793] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
2181
[  365.009013] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
2182
[  365.009265] c0 s5p-ehci s5p-ehci: host_phy_resume
2183
[  365.044137] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
2184
[  365.085446] c0 mif: usb_port_resume: 1283, 4
2185
[  365.091468] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2c 07 06 03 55 7e
2186
[  365.405533] c0 s5p-ehci s5p-ehci: host_phy_susp
2187
[  367.145983] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
2188
[  367.146871] c0 sec-battery sec-battery: sec_bat_check_temper: temp=280, adc=900
2189
[  367.147031] c0 sec-battery sec-battery: Time past : 363 secs
2190
[  367.147153] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
2191
[  367.147307] c0 sec-battery sec-battery: soc(91), vfocv(4076), vcell(4143), temp(28), charging(1), health(1), chg_adc(0)
2192
[  367.152483] c0 healthd: fuelgauge: Unknown power supply type
2193
[  367.160495] c0 healthd: battery [l=91 v=4143 t=28.0 h=2 st=2] c=0 chg=u 2000-01-01 00:36:06.044514238 UTC
2194
[  371.689253] c0 usb: reset
2195
[  371.689721] c0 adb_release
2196
[  371.689793] c0 usb: usb_gadget_disconnect
2197
[  371.689924] c0 usb: usb_remove_config cdev->config=  (null), config=c10adebc
2198
[  371.691530] c0 adb_open
2199
[  371.691603] c0 usb: android_bind_enabled_functions f:mtp
2200
[  371.691696] c0 mtp_bind_config
2201
[  371.691860] c0 usb: android_bind_enabled_functions f:adb
2202
[  371.691952] c0 adb_bind_config
2203
[  371.692048] c0 usb: usb_gadget_connect
2204
[  371.692656] c0 usb: reset
2205
[  371.694334] c0 mtp_release
2206
[  371.695250] c0 usb: android_work config=  (null),connected=0,sw_connected=1
2207
[  371.699664] c0 usb: android_work sent uevent USB_STATE=DISCONNECTED
2208
[  371.719524] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x8
2209
[  371.720323] c0 max8997-muic max8997-muic: max8997_muic_irq: irq:445
2210
[  371.720698] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x0
2211
[  371.720824] c0 max8997-muic max8997-muic: detect_dev: DETACHED
2212
[  371.721105] c0 max8997-muic max8997-muic: detach_usb: acc_type(0xb)
2213
[  371.721220] c0 max8997-muic max8997-muic: detach_charger
2214
[  371.721339] c0 [TSP] mxt224_ta_probe
2215
[  371.723498] c0 [TSP] copy_data->mxt224_enabled is 0
2216
[  371.728452] c0 sec-battery sec-battery: sec_bat_set_property: cable was changed(0)
2217
[  371.728637] c0 max8997-muic max8997-muic: set_accdet(dis) cntl2(0x00)
2218
[  371.728865] c0 max8997-charger max8997-charger: max8997_disable_charging: disable charging
2219
[  371.729507] c0 max8997-muic max8997-muic: set_com_sw(0x00)
2220
[  371.730269] c0 otg max8997_muic_usb_cb: usb mode=0
2221
[  371.730372] c0 otg change mode : USB Cable Attached --> USB Cable Detached (1 --> 0) enabled
2222
[  371.730515] c0 usb: s3c_vbus_enable, ready u_e: 1, is_active: 0
2223
[  371.730619] c0 usb: s3c_vbus_enable is_active=0(udc_disable)
2224
[  371.730791] c0 usb: s5p_usb_phy0_tune read original tune
2225
[  371.730890] c0 usb: s5p_usb_phy0_tune original tune=0x1829bb
2226
[  371.730991] c0 usb: s5p_usb_phy0_tune tune_mask=0x10380f, tune=0x10280b
2227
[  371.731112] c0 usb: s5p_usb_phy0_tune set defult tune=0x819b3
2228
[  371.731213] c0 usb: s5p_usb_phy0_tune modified tune=0x819b3
2229
[  371.731357] c0 max8997-muic max8997-muic: max8997_muic_irq: irq:449
2230
[  371.731584] c0 usb: android_work config=  (null),connected=0,sw_connected=0
2231
[  371.731721] c0 usb: android_work did not send uevent (0 0   (null))
2232
[  371.731948] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x0
2233
[  371.732068] c0 max8997-muic max8997-muic: detect_dev: DETACHED
2234
[  371.732355] c0 max8997-muic max8997-muic: handle_detach: duplicated(NONE)
2235
[  371.732728] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
2236
[  371.732848] c0 max8997 5-0066: Unused interrupt source: 0x0
2237
[  371.733357] c0 max8922-charger max8922-charger: max8922_enable_charging: disable charging,USB
2238
[  371.745323] c0 mif: set_hsic_lpa_states: 279: called(exynos4_check_usb_op+0x178/0x1d8): 
2239
[  371.745468] c0 mif: set hsic lpa enter: active state (0), pda active (0)
2240
[  371.752274] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
2241
[  371.753292] c0 max8997-charger max8997-charger: max8997_chg_charger_irq: charger IRQ(0) occurred!
2242
[  371.753993] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
2243
[  371.754113] c0 max8997 5-0066: Unused interrupt source: 0x0
2244
[  372.037213] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
2245
[  372.041890] c0 healthd: fuelgauge: Unknown power supply type
2246
[  372.044308] c0 healthd: battery [l=91 v=4143 t=28.0 h=2 st=3] c=0 chg= 2000-01-01 00:36:10.928785870 UTC
2247
[  372.106297] c0 healthd: fuelgauge: Unknown power supply type
2248
[  372.108610] c0 healthd: battery [l=91 v=4143 t=28.0 h=2 st=3] c=0 chg= 2000-01-01 00:36:10.993107590 UTC
2249
[  372.128745] c0 [TouchKey] system calling LED Notification control
2250
[  372.152375] c0 [TouchKey] touchkey is not enabled. 384
2251
[  372.227541] c0 request_suspend_state: wakeup (3->0) at 372227514123 (2000-01-01 00:36:11.112182203 UTC)
2252
[  372.227653] c0 [TouchKey] touchkey is not enabled. 384
2253
[  372.231844] c0 s3cfb s3cfb.0: +s3cfb_late_resume
2254
[  372.232024] c0 s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
2255
[  372.232084] c0 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
2256
[  372.232154] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
2257
[  372.232283] c0 s3cfb s3cfb.0: -s3cfb_late_resume
2258
[  372.232319] c0 lcd panel: +ld9040_late_resume
2259
[  372.232352] c0 lcd panel: ld9040_power_on
2260
[  372.360167] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x8
2261
[  372.360379] c0 max8997-muic max8997-muic: max8997_muic_irq: irq:449
2262
[  372.360561] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x48
2263
[  372.360594] c0 max8997-muic max8997-muic: detect_dev: charger det run, ignore
2264
[  372.360760] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
2265
[  372.360791] c0 max8997 5-0066: Unused interrupt source: 0x0
2266
[  372.362749] c0 max17042 9-0036: max17042_get_soc : soc(59b7)
2267
[  372.362777] c0 max17042_need_soc_recal: HW(0xe)
2268
[  372.362800] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
2269
[  372.427424] c0 lcd panel: id=0 brightness=0, bl=0, candela=30
2270
[  372.427470] c0 lcd panel: -ld9040_late_resume
2271
[  372.427510] c0 sii9234_late_resume()
2272
[  372.447045] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x8
2273
[  372.447310] c0 max8997-muic max8997-muic: max8997_muic_irq: irq:445
2274
[  372.447539] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x41
2275
[  372.447589] c0 max8997-muic max8997-muic: detect_dev: ATTACHED
2276
[  372.447639] c0 max8997-muic max8997-muic: attach_usb
2277
[  372.447676] c0 max8997-muic max8997-muic: attach_charger: chg_type(0x1)
2278
[  372.447733] c0 [TSP] mxt224_ta_probe
2279
[  372.449879] c0 [TSP] copy_data->mxt224_enabled is 0
2280
[  372.454768] c0 sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
2281
[  372.455146] c0 max8997-muic max8997-muic: switch_to_ap_usb
2282
[  372.455190] c0 max8997-muic max8997-muic: set_accdet(en) cntl2(0x20)
2283
[  372.455639] c0 otg max8997_muic_usb_cb: usb mode=1
2284
[  372.455679] c0 otg change mode : USB Cable Detached --> USB Cable Attached (0 --> 1) disabled
2285
[  372.455738] c0 usb: s3c_vbus_enable, ready u_e: 0, is_active: 1
2286
[  372.455780] c0 usb: s3c_vbus_enable is_active=1(udc_enable),softconnect=1
2287
[  372.455923] c0 usb: s5p_usb_phy0_tune read original tune
2288
[  372.455961] c0 usb: s5p_usb_phy0_tune original tune=0x819b3
2289
[  372.456001] c0 usb: s5p_usb_phy0_tune tune_mask=0x10380f, tune=0x10280b
2290
[  372.456056] c0 usb: s5p_usb_phy0_tune custom tune=0x1829bb
2291
[  372.456095] c0 usb: s5p_usb_phy0_tune modified tune=0x1829bb
2292
[  372.457343] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
2293
[  372.457391] c0 max8997 5-0066: Unused interrupt source: 0x0
2294
[  372.480560] c0 max8997-charger max8997-charger: max8997_disable_charging: disable charging
2295
[  372.509503] c0 max8922-charger max8922-charger: max8922_enable_charging: enable charging,USB
2296
[  372.509842] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
2297
[  372.510161] c0 max8997-charger max8997-charger: max8997_chg_charger_irq: charger IRQ(1) occurred!
2298
[  372.510388] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
2299
[  372.510434] c0 max8997 5-0066: Unused interrupt source: 0x0
2300
[  372.530257] c0 mif: link_pm_slave_wake: gpio [SWK] set [1]
2301
[  372.545159] c0 [TSP] ta_status is 1
2302
[  372.547009] c0 [TSP] mxt224_ta_probe
2303
[  372.550741] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
2304
[  372.551337] c0 [TSP] Calibration!!!!!!
2305
[  372.554653] c0 lcd panel: id=0 brightness=48, bl=1, candela=40
2306
[  372.555954] c0 [TSP] Calibration End!!!!!!
2307
[  372.580136] c0 [TSP]TA_probe MXT224E T48 Byte2 is 82
2308
[  372.604120] c0 [TSP] Calibration!!!!!!
2309
[  372.607303] c0 s5p-ehci s5p-ehci: host_phy_resume
2310
[  372.607360] c0 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_resume+0x26c/0x5dc): 
2311
[  372.607396] c0 mif: set hsic lpa wake: pda active (1)
2312
[  372.607506] c0 usb usb1: root hub lost power or was reset
2313
[  372.610687] c0 [TSP] Calibration End!!!!!!
2314
[  372.613744] c0 [TSP] Calibration!!!!!!
2315
[  372.620841] c0 [TSP] Calibration End!!!!!!
2316
[  372.624487] c0 [TSP]TA_probe MXT224E T48 Byte2 is 114
2317
[  372.630055] c0 [MODEM_IF]Active States =1, s5p-ehci
2318
[  372.633565] c0 [TSP] Calibration!!!!!!
2319
[  372.637719] c0 [TSP] Calibration End!!!!!!
2320
[  372.660238] c0 cpu1 turning on!
2321
[  372.662037] c0 usb: GET_DES
2322
[  372.675101] c0 [TSP] calibration success!!!
2323
[  372.677821] c0 [TouchKey] sec_touchkey_late_resume
2324
[  372.677895] c0 usb: android_work config=  (null),connected=1,sw_connected=0
2325
[  372.701295] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
2326
[  372.701559] c0 usb: android_work sent uevent USB_STATE=CONNECTED
2327
[  372.705369] c0 [TSP] Calibration!!!!!!
2328
[  372.718096] c0 [TSP] Calibration End!!!!!!CPU1: Booted secondary processor
2329
[  372.722060] c1 CPU1: Booted secondary processor
2330
[  372.722126] c1 notifier_call_chain : NOTIFY BAD tick_notify
2331
[  372.725075] c1 Switched to NOHz mode on CPU #1
2332
[  372.732190] c0 cpu1 on
2333
[  372.755800] c0 LED returned on
2334
[  372.775930] c0 usb: GET_DES
2335
[  372.777434] c0 android_usb gadget: high speed config #1: android
2336
[  372.777485] c0 usb: SET_CON
2337
[  372.777540] c0 usb: android_work config=c10adebc,connected=1,sw_connected=1
2338
[  372.800601] c0 mif: usb_port_resume: 1281, 0
2339
[  372.800801] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
2340
[  372.815113] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
2341
[  372.816253] c0 healthd: fuelgauge: Unknown power supply type
2342
[  372.816791] c0 healthd: battery [l=91 v=4143 t=28.0 h=2 st=2] c=0 chg=u 2000-01-01 00:36:11.701419578 UTC
2343
[  372.821117] c0 healthd: fuelgauge: Unknown power supply type
2344
[  372.821711] c0 healthd: battery [l=91 v=4143 t=28.0 h=2 st=2] c=0 chg=u 2000-01-01 00:36:11.706336037 UTC
2345
[  372.867987] c0 mtp_open
2346
[  372.910137] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci
2347
[  372.943264] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
2348
[  372.944113] c1 mif: link_pm_runtime_start: rpm_status: 0
2349
[  372.944144] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 2d ff 08 03 02 7e
2350
[  372.944179] c1 mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
2351
[  372.944212] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 2e ff 08 05 02 ff 03 7e
2352
[  372.944250] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 2f ff 08 05 02 ff 02 7e
2353
[  372.944316] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 30 ff 08 02 02 7e
2354
[  372.944877] c1 mif: iodev_netif_wake: rmnet0
2355
[  372.944903] c1 mif: iodev_netif_wake: rmnet1
2356
[  372.944926] c1 mif: iodev_netif_wake: rmnet2
2357
[  372.944950] c1 mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
2358
[  372.946545] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 2d 08 03 02 02 04 04 32 30 ...
2359
[  372.947243] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 2e 08 05 02 04 03 01 03 55 ...
2360
[  372.947983] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 2f 08 05 02 04 02 04 03 55 ...
2361
[  372.948717] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 30 08 02 02 02 7e
2362
[  373.120235] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
2363
[  373.261112] c0 s5p-ehci s5p-ehci: host_phy_susp
2364
[  373.580643] c0 [TSP] calibration was not decided yet
2365
[  373.600927] c0 [TSP] calibration was not decided yet
2366
[  374.102025] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
2367
[  374.102066] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
2368
[  374.102226] c0 G:P:DmaAddr=@643c0000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
2369
[  374.102839] c0 i2s_txctrl:Turn on
2370
[  374.730483] c0 cpu1 turnning off!
2371
[  374.737151] c1 IRQ112 no longer affine to CPU1
2372
[  374.737942] c0 CPU1: shutdown
2373
[  374.745320] c0 cpu1 off!
2374
[  375.745162] c0 cpu1 turning on!
2375
[  375.767488] c1 CPU1: Booted secondary processor
2376
[  375.767513] c1 CPU1: Booted secondary processor
2377
[  375.767590] c1 notifier_call_chain : NOTIFY BAD tick_notify
2378
[  375.768143] c0 cpu1 on
2379
[  375.770062] c1 Switched to NOHz mode on CPU #1
2380
[  377.765506] c0 cpu1 turnning off!
2381
[  377.772223] c1 IRQ112 no longer affine to CPU1
2382
[  377.773008] c0 CPU1: shutdown
2383
[  377.775422] c0 cpu1 off!
2384
[  378.361713] c0 i2s_txctrl: Turn Off - spr is no active
2385
[  378.361977] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
2386
[  378.362101] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
2387
[  382.424055] c0 max17042 9-0036: max17042_get_soc : soc(59b7)
2388
[  382.424179] c0 max17042_need_soc_recal: HW(0xe)
2389
[  382.424283] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
2390
[  383.170832] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
2391
[  383.396441] c0 [TouchKey] system calling LED Notification control
2392
[  392.026049] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=290
2393
[  392.479031] c0 max17042 9-0036: max17042_get_soc : soc(59b7)
2394
[  392.479144] c0 max17042_need_soc_recal: HW(0xe)
2395
[  392.479250] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
2396
[  393.225790] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
2397
[  399.195688] c0 lcd panel: id=0 brightness=29, bl=0, candela=30
2398
[  400.842760] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
2399
[  400.843014] c0 s5p-ehci s5p-ehci: host_phy_resume
2400
[  400.882147] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
2401
[  400.920444] c0 mif: usb_port_resume: 1283, 4
2402
[  400.926346] c0 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 30 07 06 03 57 7e
2403
[  401.241295] c0 s5p-ehci s5p-ehci: host_phy_susp
2404
[  402.529022] c0 max17042 9-0036: max17042_get_soc : soc(59b7)
2405
[  402.529133] c0 max17042_need_soc_recal: HW(0xe)
2406
[  402.529232] c0 max17042 9-0036: max17042_get_soc : use raw (89), soc (91)
2407
[  403.240382] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
2408
[  403.275373] c0 cpu1 turning on!
2409
[  403.295249] c1 CPU1: Booted secondary processor
2410
[  403.295275] c1 CPU1: Booted secondary processor
2411
[  403.295343] c1 notifier_call_chain : NOTIFY BAD tick_notify
2412
[  403.300057] c1 Switched to NOHz mode on CPU #1
2413
[  403.306115] c0 cpu1 on
2414
[  405.236497] c1 request_suspend_state: sleep (0->3) at 405236477748 (2000-01-01 00:36:44.121146370 UTC)
2415
[  405.236594] c1 [TouchKey] sec_touchkey_early_suspend
2416
[  405.241032] c1 sii9234_early_suspend()
2417
[  405.241070] c1 lcd panel: +ld9040_early_suspend
2418
[  405.241099] c1 lcd panel: ld9040_power_off
2419
[  405.242445] c0 mdnie mdnie: outdoor_store :: value=0
2420
[  405.242482] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
2421
[  405.455487] c1 lcd panel: -ld9040_early_suspend
2422
[  405.455514] c1 +s3cfb_early_suspend
2423
[  405.471818] c1 s3cfb - disable power domain
2424
[  405.471857] c1 -s3cfb_early_suspend
2425
[  405.471913] c1 sync_system +
2426
[  405.471986] c1 active wake lock sync_system
2427
[  405.472007] c1 active wake lock PowerManagerService.Dreams
2428
[  405.472032] c1 active wake lock vbus_present
2429
[  405.472056] c1 active wake lock usb device wake lock
2430
[  405.472084] c1 active wake lock usb cb wake lock
2431
[  405.505742] c1 sync_system -
2432
[  405.964754] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
2433
[  405.964852] c0 s5p-ehci s5p-ehci: host_phy_resume
2434
[  406.000408] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
2435
[  406.040078] c0 mif: usb_port_resume: 1283, 4
2436
[  406.040902] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 30 07 06 03 59 7e
2437
[  406.356015] c0 s5p-ehci s5p-ehci: host_phy_susp
2438
[  406.635238] c1 [keys]PWR 1
2439
[  406.639569] c0 [TouchKey] system calling LED Notification control
2440
[  406.644340] c0 [TouchKey] touchkey is not enabled. 384
2441
[  406.687741] c1 request_suspend_state: wakeup (3->0) at 406687712707 (2000-01-01 00:36:45.572380037 UTC)
2442
[  406.687894] c1 [TouchKey] touchkey is not enabled. 384
2443
[  406.692086] c1 s3cfb s3cfb.0: +s3cfb_late_resume
2444
[  406.692267] c1 s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
2445
[  406.692336] c1 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
2446
[  406.692437] c1 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
2447
[  406.692582] c1 s3cfb s3cfb.0: -s3cfb_late_resume
2448
[  406.692624] c1 lcd panel: +ld9040_late_resume
2449
[  406.692665] c1 lcd panel: ld9040_power_on
2450
[  406.815189] c0 [keys]PWR 0
2451
[  406.882411] c1 lcd panel: id=0 brightness=0, bl=0, candela=30
2452
[  406.882446] c1 lcd panel: -ld9040_late_resume
2453
[  406.882474] c1 sii9234_late_resume()
2454
[  406.977727] c1 lcd panel: id=0 brightness=49, bl=1, candela=40
2455
[  407.000136] c1 [TSP] ta_status is 1
2456
[  407.000793] c0 [TSP] Calibration!!!!!!
2457
[  407.002460] c0 [TSP] Calibration End!!!!!!
2458

    
2459
[  407.020754] c1 [TSP] mxt224_ta_probe
2460
[  407.028300] c1 [TSP]TA_probe MXT224E T48 Byte2 is 82
2461
[  407.037486] c1 [TSP]TA_probe MXT224E T48 Byte2 is 114
2462
[  407.044605] c1 [TSP] calibration success!!!
2463
[  407.047367] c1 [TouchKey] sec_touchkey_late_resume
2464
[  407.050099] c1 s5p_gpioint_set_type irq:389 is at GPL0(5)
2465
[  407.105847] c1 LED returned on
2466
[  407.107963] c0 [TSP] Calibration!!!!!!
2467
[  407.117431] c0 [TSP] Calibration End!!!!!!
2468

    
2469
[  407.200363] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
2470
[  407.200939] c0 sec-battery sec-battery: sec_bat_check_temper: temp=280, adc=900
2471
[  407.201000] c0 sec-battery sec-battery: Time past : 34 secs
2472
[  407.201044] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
2473
[  407.201095] c0 sec-battery sec-battery: soc(91), vfocv(4076), vcell(4138), temp(28), charging(1), health(1), chg_adc(0)
2474
[  407.202288] c0 healthd: fuelgauge: Unknown power supply type
2475
[  407.202835] c0 healthd: battery [l=91 v=4138 t=28.0 h=2 st=2] c=0 chg=u 2000-01-01 00:36:46.087458872 UTC
2476
[  408.536721] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
2477
[  408.536792] c0 s5p-ehci s5p-ehci: host_phy_resume
2478
[  408.575494] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
2479
[  408.615113] c0 mif: usb_port_resume: 1283, 4
2480
[  408.615949] c1 mif: IPC-RX(29): 7f 0e 00 00 0b 00 ff 30 07 01 03 ff 03 00 05 7e ...
2481
[  408.741940] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
2482
[  408.741992] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
2483
[  408.742167] c0 G:P:DmaAddr=@643c0000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
2484
[  408.742915] c0 i2s_txctrl:Turn on
2485
[  408.930945] c1 s5p-ehci s5p-ehci: host_phy_susp
2486
[  410.352691] c0 [TSP] calibration was good
2487
[  410.356062] c0 [TSP] ta_status is 1
2488
dhd_module_init in
2489
[  410.537100] c0 found wifi platform device bcmdhd_wlan
2490
[  410.537417] c0 Power-up adapter 'DHD generic adapter'
2491
[  410.538020] c0 wifi_platform_set_power = 1
2492
[  410.538042] c0 ------------------------------------------------
2493
[  410.538071] c0 ------------------------------------------------
2494
[  410.538103] c0 brcm_wlan_power Enter: power on
2495
[  410.538126] c0 gpio_table = [2] 
2496

    
2497
[  410.538348] c0 WLAN: GPIO_WLAN_EN = 1
2498
[  410.740098] c0 wifi_platform_bus_enumerate device present 1
2499
[  410.740140] c0 gpio_table = [6] 
2500

    
2501
[  410.740369] c0 Test logs pdev : c108a3d0 s3c_device_hsmmc3 c108a3d0
2502
[  410.740407] c0 Test logs notify_func = hsmmc3_notify_func: c0af8444
2503
[  410.740444] c0 mmc2: card inserted.
2504
[  410.970409] c0 mmc2: cmd 52 command timeout error
2505
[  410.970755] c0 mmc2: cmd 52 command timeout error
2506
[  410.974617] c0 mmc2: cmd 8 command timeout error
2507
[  410.986042] c0 mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
2508
[  411.039112] c0 mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
2509
[  411.042477] c0 mmc2: new high speed SDIO card at address 0001
2510
[  411.083968] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
2511
[  411.084036] c0 s5p-ehci s5p-ehci: host_phy_resume
2512
[  411.118498] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
2513
[  411.160100] c0 mif: usb_port_resume: 1283, 4
2514
[  411.160946] c1 mif: IPC-RX(16): 7f 0e 00 00 0b 00 ff 30 07 01 03 ff 04 00 05 7e
2515
[  411.260972] c0 bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
2516
[  411.261056] c0 bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
2517
[  411.261087] c0 bus num (host idx)=2, slot num (rca)=1
2518
[  411.261123] c0 found adapter info 'DHD generic adapter'
2519
[  411.261204] c0 alloc static buf at e4200000!
2520
[  411.264412] c0 F1 signature OK, socitype:0x1 chip:0x4330 rev:0x3 pkg:0x8
2521
[  411.264888] c0 DHD: dongle ram size is set to 294912(orig 294912) at 0x0
2522
[  411.265815] c0 wifi_platform_prealloc: failed to alloc static mem section 7
2523
[  411.268855] c0 wl_create_event_handler(): thread:wl_event_handler:1501 started
2524
[  411.269981] c0 CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xe19ce5e4
2525
[  411.277263] c0 p2p0: P2P Interface Registered
2526
[  411.277551] c0 dhd_attach(): thread:dhd_watchdog_thread:150b started
2527
[  411.278532] c0 dhd_attach(): thread:dhd_dpc:150c started
2528
[  411.278576] c0 dhd_deferred_work_init: work queue initialized 
2529
[  411.278760] c0 ---- CHIP bcm4330 B1 ----
2530
[  411.278784] c0 dhdsdio_download_firmware: firmware path=/vendor/firmware/bcmdhd_sta.bin, nvram path=/vendor/firmware/nvram_net.txt
2531
[  411.313888] c0 sdioh_request_buffer: [1] doing memory copy buf=e2a3c000, len=1126
2532
[  411.315467] c0 PR85623WAR in place
2533
[  411.315987] c0 dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
2534
[  411.443919] c0 dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
2535
[  411.444238] c0 wake enabled for irq 373
2536
[  411.456049] c0 dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
2537
[  411.456081] c0 [WIFI_SEC] dhd_check_module_cid: CIS reading failed, ret=-23
2538
[  411.458440] c0 Firmware up: op_mode=0x0005, MAC=20:d1:ee
2539
[  411.461278] c0 dhdcdc_set_ioctl: SET PM to 2
2540
[  411.461596] c0 [WIFI_SEC] sec_control_pm: /data/.psm.info open failed, so set PM to 2
2541
[  411.463925] c0 dhd_wl_ioctl: WLC_SET_VAR: buf_key_b4_m4, ret = -23
2542
[  411.463958] c0 dhd_preinit_ioctls buf_key_b4_m4 set failed -23
2543
[  411.466396] c0 dhd_wl_ioctl: WLC_GET_VAR: arp_version, ret = -23
2544
[  411.468701] c0 Firmware version = wl0: Nov 15 2012 16:26:19 version 5.90.100.410 (JB) (WFD)
2545
[  411.468819] c0 [WIFI_SEC] sec_save_wlinfo: .wifiver.info File open failed.
2546
[  411.470247] c0 [WIFI_SEC] save .wifiver.info file.
2547
[  411.470784] c0 dhd_wl_ioctl: WLC_GET_VAR: pfnlbest, ret = -23
2548
[  411.471064] c0 Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: bf019b08
2549
[  411.471102] c0 
2550
[  411.480386] c0 Backtrace: 
2551
[  411.483032] c0 [<c0718910>] (dump_backtrace+0x0/0x10c) from [<c0d06c9c>] (dump_stack+0x18/0x1c)
2552
[  411.491734] c0  r7:c1118128 r6:00000000 r5:e1d19aa0 r4:c1118128
2553
[  411.497609] c0 [<c0d06c84>] (dump_stack+0x0/0x1c) from [<c0d0700c>] (panic+0x88/0x1a8)
2554
[  411.505553] c0 [<c0d06f84>] (panic+0x0/0x1a8) from [<c0752a88>] (do_oops_enter_exit.part.0+0x0/0xec)
2555
[  411.514650] c0  r3:271aed79 r2:271aed00 r1:bf019b08 r0:c0e63348
2556
[  411.520508] c0  r7:e1d19320
2557
[  411.523391] c0 [<c0752a6c>] (__stack_chk_fail+0x0/0x1c) from [<bf019b08>] (dhd_write_macaddr+0x320/0x338 [dhd])
2558
[  411.533608] c0 [<bf0197e8>] (dhd_write_macaddr+0x0/0x338 [dhd]) from [<bf021530>] (dhd_bus_start+0x14c/0x300 [dhd])
2559
[  411.544017] c0 [<bf0213e4>] (dhd_bus_start+0x0/0x300 [dhd]) from [<bf0278c0>] (dhdsdio_probe+0x2b4/0x17bc [dhd])
2560
[  411.554001] c0  r9:18000000 r8:00000002 r7:000014e4 r6:e1e40000 r5:00000001
2561

    
2562
[  411.560729] c0 r4:bf08011c
2563
[  411.563761] c0 [<bf02760c>] (dhdsdio_probe+0x0/0x17bc [dhd]) from [<bf00cfdc>] (bcmsdh_probe+0xd0/0x118 [dhd])
2564
[  411.573618] c0 i2s_txctrl: Turn Off - spr is no active
2565
[  411.578902] c0 [<bf00cf0c>] (bcmsdh_probe+0x0/0x118 [dhd]) from [<bf00f330>] (bcmsdh_sdmmc_probe+0x110/0x1a4 [dhd])
2566
[  411.589242] c0 [<bf00f220>] (bcmsdh_sdmmc_probe+0x0/0x1a4 [dhd]) from [<c0aeb788>] (sdio_bus_probe+0xec/0x108)
2567
[  411.599116] c0  r9:bf08011c r8:bf069aa0 r7:bf0800e4 r6:e1de3600 r5:00000000
2568
[  411.605860] c0 r4:e1de3608
2569
[  411.608714] c0 [<c0aeb69c>] (sdio_bus_probe+0x0/0x108) from [<c0997280>] (driver_probe_device+0x98/0x1a8)
2570
[  411.618288] c0  r9:bf08011c r8:00000000 r7:bf0800e4 r6:e1de363c r5:c112a810
2571
[  411.625041] c0 r4:e1de3608
2572
[  411.627892] c0 [<c09971e8>] (driver_probe_device+0x0/0x1a8) from [<c0997470>] (__driver_attach+0x94/0x98)
2573
[  411.637467] c0  r7:e19ae600 r6:e1de363c r5:bf0800e4 r4:e1de3608
2574
[  411.643341] c0 [<c09973dc>] (__driver_attach+0x0/0x98) from [<c0995dd8>] (bus_for_each_dev+0x70/0xa4)
2575
[  411.652570] c0  r7:e19ae600 r6:c09973dc r5:bf0800e4 r4:00000000
2576
[  411.658445] c0 [<c0995d68>] (bus_for_each_dev+0x0/0xa4) from [<c0996f1c>] (driver_attach+0x24/0x28)
2577
[  411.667515] c0  r6:c10be074 r5:bf0800e4 r4:00000000
2578
[  411.672332] c0 [<c0996ef8>] (driver_attach+0x0/0x28) from [<c0996ae8>] (bus_add_driver+0xc8/0x270)
2579
[  411.681307] c0 [<c0996a20>] (bus_add_driver+0x0/0x270) from [<c0997b70>] (driver_register+0x90/0x164)
2580
[  411.690499] c0  r8:00000000 r7:e19a1d50 r6:00000003 r5:00000000 r4:bf0800e4
2581
[  411.697417] c0 [<c0997ae0>] (driver_register+0x0/0x164) from [<c0aeb558>] (sdio_register_driver+0x2c/0x30)
2582
[  411.707082] c0  r9:bf08011c r8:00000000 r7:e19a1d50 r6:00000003 r5:00000000
2583
[  411.713812] c0 r4:e20ec540
2584
[  411.716802] c0 [<c0aeb52c>] (sdio_register_driver+0x0/0x30) from [<bf00f444>] (bcmsdh_register_client_driver+0x18/0x1c [dhd])
2585
[  411.728178] c0 [<bf00f42c>] (bcmsdh_register_client_driver+0x0/0x1c [dhd]) from [<bf00d134>] (bcmsdh_register+0x20/0x24 [dhd])
2586
[  411.739549] c0 [<bf00d114>] (bcmsdh_register+0x0/0x24 [dhd]) from [<bf02f3a0>] (dhd_bus_register+0x2c/0x48 [dhd])
2587
[  411.749789] c0 [<bf02f374>] (dhd_bus_register+0x0/0x48 [dhd]) from [<bf067abc>] (wifi_plat_dev_drv_remove+0x260/0x454 [dhd])
2588
[  411.760993] c0 [<bf0678f8>] (wifi_plat_dev_drv_remove+0x9c/0x454 [dhd]) from [<bf067d3c>] (wifi_plat_dev_drv_probe+0x8c/0xd4 [dhd])
2589
[  411.772769] c0 [<bf067cb0>] (wifi_plat_dev_drv_probe+0x0/0xd4 [dhd]) from [<c0998710>] (platform_drv_probe+0x1c/0x20)
2590
[  411.783214] c0  r7:bf081cb0 r6:c1081d7c r5:c112a810 r4:c1081d48
2591

    
2592
[  411.789089] c0 [<c09986f4>] (platform_drv_probe+0x0/0x20) from [<c0997280>] (driver_probe_device+0x98/0x1a8)
2593
[  411.798938] c0 [<c09971e8>] (driver_probe_device+0x0/0x1a8) from [<c0997470>] (__driver_attach+0x94/0x98)
2594
[  411.808474] c0  r7:d9783780 r6:c1081d7c r5:bf081cb0 r4:c1081d48
2595
[  411.814340] c0 [<c09973dc>] (__driver_attach+0x0/0x98) from [<c0995dd8>] (bus_for_each_dev+0x70/0xa4)
2596
[  411.823574] c0  r7:d9783780
2597
 r6:c09973dc r5:bf081cb0 r4:00000000
2598
[  411.829441] c0 [<c0995d68>] (bus_for_each_dev+0x0/0xa4) from [<c0996f1c>] (driver_attach+0x24/0x28)
2599
[  411.838493] c0  r6:c10a6f10 r5:bf081cb0 r4:00000000
2600

    
2601
[  411.843331] c0 [<c0996ef8>] (driver_attach+0x0/0x28) from [<c0996ae8>] (bus_add_driver+0xc8/0x270)
2602
[  411.852310] c0 [<c0996a20>] (bus_add_driver+0x0/0x270) from [<c0997b70>] (driver_register+0x90/0x164)
2603
[  411.861514] c0  r8:00000000 r7:c1081d48 r6:c11210cc r5:e20ec540 r4:bf081cb0
2604
[  411.868416] c0 [<c0997ae0>] (driver_register+0x0/0x164) from [<c0998e7c>] (platform_driver_register+0x5c/0x60)
2605
[  411.878432] c0  r9:00000000 r8:00000000 r7:c1081d48 r6:c11210cc r5:e20ec540
2606
[  411.885182] c0 r4:bf085b98
2607
[  411.888145] c0 [<c0998e20>] (platform_driver_register+0x0/0x60) from [<bf068154>] (dhd_wifi_platform_register_drv+0x140/0x250 [dhd])
2608
[  411.900161] c0 [<bf068014>] (dhd_wifi_platform_register_drv+0x0/0x250 [dhd]) from [<bf09a038>] (init_module+0x38/0x3c [dhd])
2609
[  411.911170] c0  r9:00000000
2610
 r8:bf09a000 r7:e20ec024 r6:e20ec000 r5:e19a0010
    (1-1/1)