1
|
[ 0.000000] c0 Initializing cgroup subsys cpu
|
2
|
[ 0.000000] c0 Linux version 3.0.101-replicant (wolfi@machinist) (gcc version 5.4.1 20160919 (15:5.4.1+svn241155-1) ) #3 SMP PREEMPT Sat Feb 18 22:21:15 UTC 2017
|
3
|
[ 0.000000] c0 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d
|
4
|
[ 0.000000] c0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
|
5
|
[ 0.000000] c0 Machine: SMDK4210
|
6
|
[ 0.000000] c0 Memory policy: ECC disabled, Data cache writealloc
|
7
|
[ 0.000000] c0 CPU EXYNOS4210 (id 0x43210211)
|
8
|
[ 0.000000] c0 exynos4_init_clocks: initializing clocks
|
9
|
[ 0.000000] c0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
|
10
|
[ 0.000000] c0 s3c_register_clksrc: clock audiocdclk has no registers set
|
11
|
[ 0.000000] c0 audiocdclk: no parent clock specified
|
12
|
[ 0.000000] c0 s3c_register_clksrc: clock armclk has no registers set
|
13
|
[ 0.000000] c0 exynos4_setup_clocks: registering clocks
|
14
|
[ 0.000000] c0 exynos4_setup_clocks: xtal is 24000000
|
15
|
[ 0.000000] c0 EXYNOS4: PLL settings, A=800000000, M=800000000, E=180633605 V=300000000
|
16
|
[ 0.000000] c0 EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=200000000
|
17
|
[ 0.000000] c0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
|
18
|
[ 0.000000] c0 uclk1: source is mout_mpll (6), rate is 200000000
|
19
|
[ 0.000000] c0 uclk1: source is mout_mpll (6), rate is 200000000
|
20
|
[ 0.000000] c0 uclk1: source is mout_mpll (6), rate is 100000000
|
21
|
[ 0.000000] c0 uclk1: source is mout_mpll (6), rate is 100000000
|
22
|
[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 24000000
|
23
|
[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 24000000
|
24
|
[ 0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 24000000
|
25
|
[ 0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 24000000
|
26
|
[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
|
27
|
[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
|
28
|
[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
|
29
|
[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
|
30
|
[ 0.000000] c0 sclk_fimd: source is mout_mpll (6), rate is 50000000
|
31
|
[ 0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 24000000
|
32
|
[ 0.000000] c0 sclk_mdnie: source is mout_mpll (6), rate is 50000000
|
33
|
[ 0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 24000000
|
34
|
[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 24000000
|
35
|
[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 24000000
|
36
|
[ 0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 100000000
|
37
|
[ 0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 100000000
|
38
|
[ 0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 12000000
|
39
|
[ 0.000000] c0 (sec_debug_set_upload_magic) 66262564
|
40
|
[ 0.000000] c0 (sec_debug_set_upload_cause) cafebabe
|
41
|
[ 0.000000] c0 On node 0 totalpages: 262144
|
42
|
[ 0.000000] c0 free_area_init_node: node 0, pgdat c10eea60, node_mem_map c14e4000
|
43
|
[ 0.000000] c0 Normal zone: 1600 pages used for memmap
|
44
|
[ 0.000000] c0 Normal zone: 0 pages reserved
|
45
|
[ 0.000000] c0 Normal zone: 203200 pages, LIFO batch:31
|
46
|
[ 0.000000] c0 HighMem zone: 448 pages used for memmap
|
47
|
[ 0.000000] c0 HighMem zone: 56896 pages, LIFO batch:15
|
48
|
[ 0.000000] c0 sec_debug_magic_init: success reserving magic code area
|
49
|
[ 0.000000] c0 PERCPU: Embedded 7 pages/cpu @c1cec000 s7168 r8192 d13312 u32768
|
50
|
[ 0.000000] c0 pcpu-alloc: s7168 r8192 d13312 u32768 alloc=8*4096
|
51
|
[ 0.000000] c0 pcpu-alloc: [0] 0 [0] 1
|
52
|
[ 0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
|
53
|
[ 0.000000] c0 Kernel command line: console=ttySAC2,115200 consoleblank=0 androidboot.hardware=smdk4210 loglevel=4 console=ram androidboot.serialno=00199b717c5d6e sec_debug.enable=0 sec_debug.enable_user=0 c1_watchdog.sec_pet=5 sec_log=0x100000@0x4d900000 s3cfb.bootloaderfb=0x5ec00000 ld9040.get_lcdtype=0x0 consoleblank=0 lpj=3981312 vmalloc=144m
|
54
|
[ 0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:1501 sec_log_buf:fc200000 sec_log_size:1048576
|
55
|
[ 0.000000] c0 sec_log_save_old: saved old log at 5377@c1cfb160
|
56
|
[ 0.000000] c0 sec_getlog_supply_kloginfo: 0xcd900000
|
57
|
[ 0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)
|
58
|
[ 0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
|
59
|
[ 0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
|
60
|
[ 0.000000] c0 allocated 4194304 bytes of page_cgroup
|
61
|
[ 0.000000] c0 please try 'cgroup_disable=memory' option if you don't want memory cgroups
|
62
|
[ 0.000000] c0 Memory: 1024MB = 1024MB total
|
63
|
[ 0.000000] c0 Memory: 798188k/798188k available, 250388k reserved, 229376K highmem
|
64
|
[ 0.000000] c0 Virtual kernel memory layout:
|
65
|
[ 0.000000] c0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
|
66
|
[ 0.000000] c0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
|
67
|
[ 0.000000] c0 DMA : 0xfea00000 - 0xffe00000 ( 20 MB)
|
68
|
[ 0.000000] c0 vmalloc : 0xf2800000 - 0xfb000000 ( 136 MB)
|
69
|
[ 0.000000] c0 lowmem : 0xc0000000 - 0xf2000000 ( 800 MB)
|
70
|
[ 0.000000] c0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
|
71
|
[ 0.000000] c0 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
|
72
|
[ 0.000000] c0 .init : 0xc0008000 - 0xc06f0000 (7072 kB)
|
73
|
[ 0.000000] c0 .text : 0xc06f0000 - 0xc0ee5000 (8148 kB)
|
74
|
[ 0.000000] c0 .data : 0xc0ee6000 - 0xc10ef5e0 (2086 kB)
|
75
|
[ 0.000000] c0 .bss : 0xc10ef604 - 0xc14e3528 (4048 kB)
|
76
|
[ 0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
|
77
|
[ 0.000000] c0 Preemptible hierarchical RCU implementation.
|
78
|
[ 0.000000] c0 NR_IRQS:493
|
79
|
[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
|
80
|
[ 0.000000] c0 Console: colour dummy device 80x30
|
81
|
[ 0.000000] c0 Calibrating delay loop (skipped) preset value.. 1592.52 BogoMIPS (lpj=3981312)
|
82
|
[ 0.000000] c0 pid_max: default: 32768 minimum: 301
|
83
|
[ 0.000000] c0 Security Framework initialized
|
84
|
[ 0.000000] c0 SELinux: Initializing.
|
85
|
[ 0.000000] c0 SELinux: Starting in permissive mode
|
86
|
[ 0.000000] c0 Mount-cache hash table entries: 512
|
87
|
[ 0.000000] c0 Initializing cgroup subsys debug
|
88
|
[ 0.000000] c0 Initializing cgroup subsys cpuacct
|
89
|
[ 0.000000] c0 Initializing cgroup subsys memory
|
90
|
[ 0.000000] c0 Initializing cgroup subsys freezer
|
91
|
[ 0.000000] c0 CPU: Testing write buffer coherency: ok
|
92
|
[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
|
93
|
[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
|
94
|
[ 0.000000] c0 L310 cache controller enabled
|
95
|
[ 0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B
|
96
|
[ 0.030000] c1 CPU1: Booted secondary processor
|
97
|
[ 0.030000] c1 CPU1: Booted secondary processor
|
98
|
[ 0.030000] c1 notifier_call_chain : NOTIFY BAD tick_notify
|
99
|
[ 0.040000] c0 Brought up 2 CPUs
|
100
|
[ 0.040000] c0 SMP: Total of 2 processors activated (3185.04 BogoMIPS).
|
101
|
[ 0.045000] c0 print_constraints: dummy:
|
102
|
[ 0.045000] c0 NET: Registered protocol family 16
|
103
|
[ 0.050000] c0 universal_tsp_init touch : 356
|
104
|
[ 0.050000] c0 smdkc210_machine_init() register sii9234 driver
|
105
|
[ 0.050000] c0 Registered chained gpio int handler for interrupt 110.
|
106
|
[ 0.050000] c0 Registered interrupt support for gpio group 20.
|
107
|
[ 0.050000] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
|
108
|
[ 0.050000] c0 usb: smdkc210_usbgadget_init: default luns=0, new luns=2
|
109
|
[ 0.050000] c0 usb: smdkc210_usbgadget_init tune_mask=0x10380f, tune=0x10280b
|
110
|
[ 0.050000] c0 ld9040_fb_init :: lcdtype=0
|
111
|
[ 0.050000] c0 brcm_wlan_init: start
|
112
|
[ 0.050000] c0 brcm_init_wlan_mem: WIFI MEM Allocated
|
113
|
[ 0.060000] c0 exynos4_pmu_init: PMU supports 4210(71)
|
114
|
[ 0.060000] c0 S3C Power Management, Copyright 2004 Simtec Electronics
|
115
|
[ 0.065000] c0 EXYNOS4: Initializing architecture
|
116
|
[ 0.065000] c0 s3c-adc samsung-adc-v3: attached adc driver
|
117
|
[ 0.065000] c0 samsung-pd samsung-pd.0: power domain registered
|
118
|
[ 0.065000] c0 samsung-pd samsung-pd.1: power domain registered
|
119
|
[ 0.065000] c0 samsung-pd samsung-pd.2: power domain registered
|
120
|
[ 0.065000] c0 lcd0 disable skip only one time
|
121
|
[ 0.065000] c0 samsung-pd samsung-pd.3: power domain registered
|
122
|
[ 0.065000] c0 samsung-pd samsung-pd.5: power domain registered
|
123
|
[ 0.065000] c0 samsung-pd samsung-pd.4: power domain registered
|
124
|
[ 0.065000] c0 samsung-pd samsung-pd.6: power domain registered
|
125
|
[ 0.065000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
|
126
|
[ 0.065000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
|
127
|
[ 0.065000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
|
128
|
[ 0.065000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
|
129
|
[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
|
130
|
[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
|
131
|
[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.
|
132
|
[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
|
133
|
[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.9: Initialized for s5p-fimg2d.
|
134
|
[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.
|
135
|
[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
|
136
|
[ 0.065000] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
|
137
|
[ 0.090000] c0 bio: create slab <bio-0> at 0
|
138
|
[ 0.095000] c0 SCSI subsystem initialized
|
139
|
[ 0.095000] c0 usbcore: registered new interface driver usbfs
|
140
|
[ 0.095000] c0 usbcore: registered new interface driver hub
|
141
|
[ 0.095000] c0 usbcore: registered new device driver usb
|
142
|
[ 0.095000] c0 i2c-gpio i2c-gpio.8: using pins 91 (SDA) and 89 (SCL)
|
143
|
[ 0.095000] c0 i2c-gpio i2c-gpio.9: using pins 163 (SDA) and 164 (SCL)
|
144
|
[ 0.095000] c0 i2c-gpio i2c-gpio.11: using pins 99 (SDA) and 107 (SCL)
|
145
|
[ 0.095000] c0 i2c-gpio i2c-gpio.14: using pins 136 (SDA) and 135 (SCL)
|
146
|
[ 0.095000] c0 i2c-gpio i2c-gpio.12: using pins 31 (SDA) and 33 (SCL)
|
147
|
[ 0.095000] c0 i2c-gpio i2c-gpio.15: using pins 154 (SDA) and 156 (SCL)
|
148
|
[ 0.095000] c0 i2c-gpio i2c-gpio.16: using pins 18 (SDA) and 19 (SCL)
|
149
|
[ 0.100000] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
|
150
|
[ 0.100000] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
|
151
|
[ 0.100000] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
|
152
|
[ 0.100000] c0 max8997 5-0066: max8997_irq_init: PMIC ID(0x77)
|
153
|
[ 0.100000] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
|
154
|
[ 0.100000] c1 max8997 5-0066: Unused interrupt source: 0x0
|
155
|
[ 0.100000] c0 max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck1: 1350000, i:28
|
156
|
[ 0.100000] c0 max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck2: 1150000, i:20
|
157
|
[ 0.100000] c0 max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck5: 1200000, i:22
|
158
|
[ 0.100000] c0 max8997-pmic max8997-pmic: RAMP REG(0xf9)
|
159
|
[ 0.105000] c0 print_constraints: VADC_3.3V_C210: 3300 mV
|
160
|
[ 0.105000] c0 print_constraints: VUSB_1.1V: 1100 mV
|
161
|
[ 0.105000] c0 print_constraints: VMIPI_1.8V: 1800 mV
|
162
|
[ 0.105000] c0 print_constraints: VHSIC_1.2V: 1200 mV
|
163
|
[ 0.105000] c0 print_constraints: CAM_ISP_1.8V: 1800 mV
|
164
|
[ 0.105000] c0 print_constraints: VUSB_3.3V: 3300 mV
|
165
|
[ 0.105000] c0 print_constraints: VPLL_1.1V: 1100 mV
|
166
|
[ 0.105000] c0 print_constraints: TOUCH_2.8V: 2800 mV
|
167
|
[ 0.110000] c0 print_constraints: VT_CAM_1.8V: 1800 mV
|
168
|
[ 0.110000] c0 print_constraints: VCC_3.0V_LCD: 3000 mV
|
169
|
[ 0.110000] c0 print_constraints: VCC_2.8V_MOTOR: 2800 mV
|
170
|
[ 0.110000] c0 print_constraints: LED_A_2.8V: 2800 mV
|
171
|
[ 0.110000] c0 print_constraints: CAM_SENSOR_IO_1.8V: 1800 mV
|
172
|
[ 0.110000] c0 print_constraints: VTF_2.8V: 2800 mV
|
173
|
[ 0.110000] c0 print_constraints: TOUCH_LED_3.3V: 2500 <--> 3300 mV at 3000 mV
|
174
|
[ 0.110000] c0 print_constraints: VDDQ_M1M2_1.2V: 1200 mV
|
175
|
[ 0.110000] c0 print_constraints: vdd_arm range: 650 <--> 2225 mV at 1350 mV
|
176
|
[ 0.115000] c0 print_constraints: vdd_int range: 650 <--> 2225 mV at 1150 mV
|
177
|
[ 0.115000] c0 print_constraints: G3D_1.1V: 900 <--> 1200 mV at 1100 mV
|
178
|
[ 0.115000] c0 print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
|
179
|
[ 0.115000] c0 print_constraints: VMEM_1.2V: 1200 mV
|
180
|
[ 0.115000] c0 print_constraints: VCC_SUB_2.0V: 2000 mV
|
181
|
[ 0.115000] c0 print_constraints: safeout1 range:
|
182
|
[ 0.115000] c0 print_constraints: safeout2 range:
|
183
|
[ 0.115000] c0 print_constraints: FLASH_CUR: 23 <--> 750 mA at 23 mA
|
184
|
[ 0.115000] c0 print_constraints: MOVIE_CUR: 15 <--> 250 mA at 15 mA
|
185
|
[ 0.115000] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
|
186
|
[ 0.115000] c0 s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter
|
187
|
[ 0.120000] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
|
188
|
[ 0.120000] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.
|
189
|
[ 0.120000] c0 Bluetooth: Core ver 2.16
|
190
|
[ 0.120000] c0 NET: Registered protocol family 31
|
191
|
[ 0.120000] c0 Bluetooth: HCI device and connection manager initialized
|
192
|
[ 0.120000] c0 Bluetooth: HCI socket layer initialized
|
193
|
[ 0.120000] c0 Bluetooth: L2CAP socket layer initialized
|
194
|
[ 0.120000] c0 Bluetooth: SCO socket layer initialized
|
195
|
[ 0.120000] c0 cfg80211: Calling CRDA to update world regulatory domain
|
196
|
[ 0.120000] c0 Switching to clocksource mct-frc
|
197
|
[ 0.121292] c0 Switched to NOHz mode on CPU #0
|
198
|
[ 0.121422] c1 Switched to NOHz mode on CPU #1
|
199
|
[ 0.133407] c0 NET: Registered protocol family 2
|
200
|
[ 0.133628] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
|
201
|
[ 0.134393] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
|
202
|
[ 0.136344] c0 TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
|
203
|
[ 0.137367] c0 TCP: Hash tables configured (established 131072 bind 65536)
|
204
|
[ 0.137404] c0 TCP reno registered
|
205
|
[ 0.137431] c0 UDP hash table entries: 512 (order: 2, 16384 bytes)
|
206
|
[ 0.137491] c0 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
|
207
|
[ 0.137896] c0 NET: Registered protocol family 1
|
208
|
[ 0.163069] c0 PMU: registered new PMU device of type 0
|
209
|
[ 0.164450] c0 MUIC:[/home/wolfi/replicant/6.0-romsrc-clean/kernel/samsung/smdk4412/arch/arm/mach-exynos/sec-switch_max8997.c] func:uart_switch_init
|
210
|
[ 0.164521] c0 ##MUIC [ /home/wolfi/replicant/6.0-romsrc-clean/kernel/samsung/smdk4412/arch/arm/mach-exynos/sec-switch_max8997.c ]- func : uart_switch_init !! val:-0-
|
211
|
[ 0.165368] c0 regulator_consumer_probe: loading u1-regulator-consumer
|
212
|
[ 0.166036] c0 wake enabled for irq 374
|
213
|
[ 0.166252] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
|
214
|
[ 0.166606] c0 Loaded driver for PL330 DMAC-0 s3c-pl330
|
215
|
[ 0.166639] c0 DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
|
216
|
[ 0.166773] c0 Loaded driver for PL330 DMAC-1 s3c-pl330
|
217
|
[ 0.166805] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
|
218
|
[ 0.166938] c0 Loaded driver for PL330 DMAC-2 s3c-pl330
|
219
|
[ 0.166969] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
|
220
|
[ 0.167216] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
221
|
[ 0.167274] c1 FIPS: self-tests for aes-asm (aes) passed
|
222
|
[ 0.167383] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
223
|
[ 0.167462] c1 FIPS: self-tests for sha1-asm (sha1) passed
|
224
|
[ 0.167840] c0 audit: initializing netlink socket (disabled)
|
225
|
[ 0.167903] c0 type=2000 audit(0.165:1): initialized
|
226
|
[ 0.168432] c0 highmem bounce pool size: 64 pages
|
227
|
[ 0.168692] c0 ashmem: initialized
|
228
|
[ 0.181787] c0 fuse init (API version 7.16)
|
229
|
[ 0.182591] c0 msgmni has been set to 1110
|
230
|
[ 0.182715] c0 SELinux: Registering netfilter hooks
|
231
|
[ 0.183206] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
232
|
[ 0.183240] c1 FIPS: self-tests for non-FIPS cipher_null-generic (cipher_null) passed
|
233
|
[ 0.183343] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
234
|
[ 0.183375] c1 FIPS: self-tests for non-FIPS ecb-cipher_null (ecb(cipher_null)) passed
|
235
|
[ 0.183472] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
236
|
[ 0.183504] c1 FIPS: self-tests for non-FIPS digest_null-generic (digest_null) passed
|
237
|
[ 0.183597] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
238
|
[ 0.183629] c1 FIPS: self-tests for non-FIPS compress_null-generic (compress_null) passed
|
239
|
[ 0.183750] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
240
|
[ 0.183821] c1 FIPS: self-tests for non-FIPS md4-generic (md4) passed
|
241
|
[ 0.183934] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
242
|
[ 0.183997] c1 FIPS: self-tests for non-FIPS md5-generic (md5) passed
|
243
|
[ 0.184103] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
244
|
[ 0.184172] c1 FIPS: self-tests for sha1-generic (sha1) passed
|
245
|
[ 0.184276] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
246
|
[ 0.184336] c1 FIPS: self-tests for sha224-generic (sha224) passed
|
247
|
[ 0.184464] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
248
|
[ 0.184515] c1 FIPS: self-tests for sha256-generic (sha256) passed
|
249
|
[ 0.184642] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
250
|
[ 0.184863] c1 FIPS: self-tests for sha384-generic (sha384) passed
|
251
|
[ 0.184971] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
252
|
[ 0.185210] c1 FIPS: self-tests for sha512-generic (sha512) passed
|
253
|
[ 0.185358] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
254
|
[ 0.185414] c1 FIPS: self-tests for des-generic (des) passed
|
255
|
[ 0.185519] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
256
|
[ 0.185576] c1 FIPS: self-tests for des3_ede-generic (des3_ede) passed
|
257
|
[ 0.185684] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
258
|
[ 0.185716] c1 FIPS: self-tests for non-FIPS twofish-generic (twofish) passed
|
259
|
[ 0.185806] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
260
|
[ 0.185887] c1 FIPS: self-tests for aes-generic (aes) passed
|
261
|
[ 0.185995] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
262
|
[ 0.186026] c1 FIPS: self-tests for non-FIPS arc4-generic (arc4) passed
|
263
|
[ 0.186120] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
264
|
[ 0.186626] c1 FIPS: self-tests for non-FIPS deflate-generic (deflate) passed
|
265
|
[ 0.186762] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
266
|
[ 0.186845] c1 FIPS: self-tests for crc32c-generic (crc32c) passed
|
267
|
[ 0.186987] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
268
|
[ 0.187024] c1 alg: comp: Compression test 1 failed for lzo-generic: output len = 57
|
269
|
[ 0.187074] c1 FIPS: self-tests for non-FIPS lzo (lzo-generic) failed
|
270
|
[ 0.187181] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
271
|
[ 0.187212] c1 FIPS: No test for lz4 (lz4-generic)
|
272
|
[ 0.187295] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
273
|
[ 0.187327] c1 FIPS: No test for stdrng (krng)
|
274
|
[ 0.187406] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
275
|
[ 0.210715] c1 FIPS: self-tests for ansi_cprng (stdrng) passed
|
276
|
[ 0.210829] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
277
|
[ 0.210861] c1 FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng)
|
278
|
[ 0.211052] c0 FIPS: self-tests for non-FIPS md5 (md5) passed
|
279
|
[ 0.211190] c0 FIPS: self-tests for sha1 (sha1) passed
|
280
|
[ 0.211606] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
281
|
[ 0.211689] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
282
|
[ 0.211975] c0 FIPS: self-tests for ecb(des-generic) (ecb(des)) passed
|
283
|
[ 0.212544] c0 FIPS: self-tests for ecb(des) (ecb(des)) passed
|
284
|
[ 0.212905] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
285
|
[ 0.213012] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
286
|
[ 0.213451] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
287
|
[ 0.213617] c0 FIPS: self-tests for non-FIPS cbc(des-generic) (cbc(des)) passed
|
288
|
[ 0.213907] c0 FIPS: self-tests for non-FIPS cbc(des) (cbc(des)) passed
|
289
|
[ 0.214288] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
290
|
[ 0.214395] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
291
|
[ 0.214529] c0 FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
|
292
|
[ 0.214800] c0 FIPS: self-tests for ecb(des3_ede) (ecb(des3_ede)) passed
|
293
|
[ 0.215194] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
294
|
[ 0.215300] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
295
|
[ 0.215742] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
296
|
[ 0.215893] c0 FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
|
297
|
[ 0.216156] c0 FIPS: self-tests for cbc(des3_ede) (cbc(des3_ede)) passed
|
298
|
[ 0.216294] c0 FIPS: self-tests for non-FIPS md4 (md4) passed
|
299
|
[ 0.216418] c0 FIPS: self-tests for sha256 (sha256) passed
|
300
|
[ 0.216778] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
301
|
[ 0.216886] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
302
|
[ 0.217115] c0 FIPS: self-tests for non-FIPS ecb(twofish-generic) (ecb(twofish)) passed
|
303
|
[ 0.217544] c0 FIPS: self-tests for non-FIPS ecb(twofish) (ecb(twofish)) passed
|
304
|
[ 0.217936] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
305
|
[ 0.218043] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
306
|
[ 0.218484] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
307
|
[ 0.218706] c0 FIPS: self-tests for non-FIPS cbc(twofish-generic) (cbc(twofish)) passed
|
308
|
[ 0.219114] c0 FIPS: self-tests for non-FIPS cbc(twofish) (cbc(twofish)) passed
|
309
|
[ 0.219485] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
310
|
[ 0.219593] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
311
|
[ 0.219725] c0 FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
|
312
|
[ 0.219984] c0 FIPS: self-tests for ecb(aes) (ecb(aes)) passed
|
313
|
[ 0.220976] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
314
|
[ 0.221086] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
315
|
[ 0.221533] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
316
|
[ 0.221697] c0 FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
|
317
|
[ 0.221973] c0 FIPS: self-tests for cbc(aes) (cbc(aes)) passed
|
318
|
[ 0.222330] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
319
|
[ 0.222438] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
320
|
[ 0.222884] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
321
|
[ 0.223030] c0 FIPS: self-tests for ctr(aes-asm) (ctr(aes)) passed
|
322
|
[ 0.223278] c0 FIPS: self-tests for ctr(aes) (ctr(aes)) passed
|
323
|
[ 0.223637] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
324
|
[ 0.223743] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
325
|
[ 0.224188] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
326
|
[ 0.224631] c0 FIPS: self-tests for rfc3686(ctr(aes-asm)) (rfc3686(ctr(aes))) passed
|
327
|
[ 0.225632] c0 FIPS: self-tests for rfc3686(ctr(aes)) (rfc3686(ctr(aes))) passed
|
328
|
[ 0.226085] c0 FIPS: self-tests for sha384 (sha384) passed
|
329
|
[ 0.226511] c0 FIPS: self-tests for sha512 (sha512) passed
|
330
|
[ 0.227411] c0 FIPS: self-tests for non-FIPS deflate (deflate) passed
|
331
|
[ 0.227885] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
332
|
[ 0.227999] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
333
|
[ 0.228228] c0 FIPS: self-tests for non-FIPS ecb(arc4-generic) (ecb(arc4)) passed
|
334
|
[ 0.228690] c0 FIPS: self-tests for non-FIPS ecb(arc4) (ecb(arc4)) passed
|
335
|
[ 0.228870] c0 FIPS: self-tests for crc32c (crc32c) passed
|
336
|
[ 0.228996] c0 FIPS: self-tests for sha224 (sha224) passed
|
337
|
[ 0.229311] c0 alg: comp: Failed to load transform for lzo: -2
|
338
|
[ 0.229612] c0 alg: comp: Failed to load transform for lzo: -2
|
339
|
[ 0.229645] c0 FIPS: self-tests for non-FIPS lzo (lzo) failed
|
340
|
[ 0.230003] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
341
|
[ 0.230147] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
342
|
[ 0.230598] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
343
|
[ 0.230988] c0 FIPS: self-tests for non-FIPS cts(cbc(aes-asm)) (cts(cbc(aes))) passed
|
344
|
[ 0.231720] c0 FIPS: self-tests for non-FIPS cts(cbc(aes)) (cts(cbc(aes))) passed
|
345
|
[ 0.232101] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
346
|
[ 0.232210] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
347
|
[ 0.232386] c0 FIPS: self-tests for non-FIPS hmac(md5-generic) (hmac(md5)) passed
|
348
|
[ 0.232736] c0 FIPS: self-tests for non-FIPS hmac(md5) (hmac(md5)) passed
|
349
|
[ 0.233103] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
350
|
[ 0.233213] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
351
|
[ 0.233424] c0 FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
|
352
|
[ 0.233848] c0 FIPS: self-tests for hmac(sha1) (hmac(sha1)) passed
|
353
|
[ 0.234216] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
354
|
[ 0.234327] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
355
|
[ 0.234680] c0 FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
|
356
|
[ 0.235422] c0 FIPS: self-tests for hmac(sha256) (hmac(sha256)) passed
|
357
|
[ 0.235796] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
358
|
[ 0.235905] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
359
|
[ 0.236694] c0 FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
|
360
|
[ 0.238272] c0 FIPS: self-tests for hmac(sha384) (hmac(sha384)) passed
|
361
|
[ 0.238639] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
362
|
[ 0.238749] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
363
|
[ 0.239532] c0 FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
|
364
|
[ 0.241281] c0 FIPS: self-tests for hmac(sha512) (hmac(sha512)) passed
|
365
|
[ 0.241740] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
366
|
[ 0.241851] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
367
|
[ 0.242068] c0 FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
|
368
|
[ 0.242506] c0 FIPS: self-tests for hmac(sha224) (hmac(sha224)) passed
|
369
|
[ 0.288443] c0 FIPS: self-tests for ansi_cprng (ansi_cprng) passed
|
370
|
[ 0.288479] c0 tcrypt: one or more tests failed!
|
371
|
[ 0.288575] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
|
372
|
[ 0.288664] c0 FIPS: self-tests for non-FIPS ghash-generic (ghash) passed
|
373
|
[ 0.288758] c0 io scheduler noop registered
|
374
|
[ 0.288784] c0 io scheduler deadline registered
|
375
|
[ 0.288927] c0 io scheduler cfq registered (default)
|
376
|
[ 0.288955] c0 io scheduler row registered
|
377
|
[ 0.288979] c0 io scheduler sio registered
|
378
|
[ 0.289204] c0 s3cfb s3cfb.0: div(32) max should be 16
|
379
|
[ 0.289238] c0 s3cfb s3cfb.0: vclk=25067520, div=32(16), rate=50000000
|
380
|
[ 0.289321] c0 s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
|
381
|
[ 0.289580] c0 s3cfb s3cfb.0: [fb2] dma: 0x7143c000, cpu: 0xf2909000, size: 0x002ee000
|
382
|
[ 0.291582] c0 sec_getlog_supply_fbinfo: 0x7143c000 480 800 32 2
|
383
|
[ 0.293948] c0 Bootloader sent 'bootloaderfb' : 5EC00000
|
384
|
[ 0.294975] c0 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
|
385
|
[ 0.295142] c0 s3cfb s3cfb.0: registered successfully
|
386
|
[ 0.295833] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
|
387
|
[ 0.295872] c0 mdnie mdnie: registered successfully
|
388
|
[ 0.296331] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
|
389
|
[ 0.370335] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
|
390
|
[ 0.385085] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
|
391
|
[ 0.405070] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
|
392
|
[ 0.460829] c0 console [ttySAC2] enabled
|
393
|
[ 0.475077] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
|
394
|
[ 0.490430] c0 Mali: exynos_result_of_asv_group = 0x0, target_asv = 0x0
|
395
|
[ 0.490469] c0 Mali: mali_dvfs[0].vol = 950000
|
396
|
[ 0.490496] c0 Mali: mali_dvfs[1].vol = 950000
|
397
|
[ 0.490523] c0 Mali: mali_runtime_resume.vol = 950000
|
398
|
[ 0.490551] c0 Mali: mali_dvfs[2].vol = 1000000
|
399
|
[ 0.490578] c0 Mali: init_gpu_vol = 1000000
|
400
|
[ 0.490669] c0 Mali: Mali frequency 266
|
401
|
[ 0.490694] c0 Mali: init_mali_clock mali_clock c105214c
|
402
|
[ 0.491157] c0 Mali: = regulator_set_voltage: 1000000, 1000000
|
403
|
[ 0.491748] c0 Mali: Mali frequency 200
|
404
|
[ 0.514841] c0 Mali: Mali device driver loaded
|
405
|
[ 0.515221] c0 UMP: UMP device driver 0000 loaded
|
406
|
[ 0.523336] c0 brd: module loaded
|
407
|
[ 0.527417] c0 loop: module loaded
|
408
|
[ 0.528013] c0 zram: Created 1 device(s) ...
|
409
|
[ 0.528674] c0 sec_jack_probe : Registering jack driver
|
410
|
[ 0.529870] c0 wake enabled for irq 378
|
411
|
[ 0.530435] c0 input: max8997-muic as /devices/platform/s3c2440-i2c.5/i2c-5/5-0066/max8997-muic/input/input0
|
412
|
[ 0.530496] c0 max8997_muic_cfg_uart_gpio: path=0
|
413
|
[ 0.530712] c0 max8997-muic max8997-muic: max8997_muic_set_adcdbset: ADCDBSET(0x20)
|
414
|
[ 0.531539] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x8
|
415
|
[ 0.531774] c1 max8997-muic max8997-muic: max8997_muic_irq: irq:445
|
416
|
[ 0.532250] c0 Loading pn544 driver
|
417
|
[ 0.532297] c1 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x41
|
418
|
[ 0.532335] c0 pn544_probe : IRQ num 367
|
419
|
[ 0.532362] c1 max8997-muic max8997-muic: detect_dev: ATTACHED
|
420
|
[ 0.532399] c1 max8997-muic max8997-muic: attach_usb
|
421
|
[ 0.532434] c1 max8997-muic max8997-muic: attach_charger: chg_type(0x1)
|
422
|
[ 0.532471] c1 max8997_muic_charger_cb: fail to get battery ps
|
423
|
[ 0.536868] c1 max8997-muic max8997-muic: attach_charger: charger_cb(-19) err
|
424
|
[ 0.543979] c1 max8997-muic max8997-muic: max8997_muic_irq: error returned.
|
425
|
[ 0.550928] c1 max8997-muic max8997-muic: max8997_muic_irq: irq:449
|
426
|
[ 0.551048] c0 pn544_probe : requesting IRQ 367
|
427
|
[ 0.551159] c1 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x41
|
428
|
[ 0.551199] c1 max8997-muic max8997-muic: detect_dev: ATTACHED
|
429
|
[ 0.551236] c1 max8997-muic max8997-muic: attach_usb: duplicated(USB)
|
430
|
[ 0.551432] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
|
431
|
[ 0.551470] c1 max8997 5-0066: Unused interrupt source: 0x0
|
432
|
[ 0.552810] c0 lcd panel: ld9040_probe : lcdtype : SM2_A1
|
433
|
[ 0.552843] c0 lcd panel: ld9040 panel driver has been probed.
|
434
|
[ 0.553039] c0 PPP generic driver version 2.4.2
|
435
|
[ 0.553405] c0 PPP Deflate Compression module registered
|
436
|
[ 0.553436] c0 PPP BSD Compression module registered
|
437
|
[ 0.553489] c0 PPP MPPE Compression module registered
|
438
|
[ 0.553518] c0 NET: Registered protocol family 24
|
439
|
[ 0.553549] c0 tun: Universal TUN/TAP device driver, 1.6
|
440
|
[ 0.553577] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
|
441
|
[ 0.553944] c0 usbcore: registered new interface driver ath9k_htc
|
442
|
[ 0.554160] c0 host_notifier host_notifier.0: notifier_prove
|
443
|
[ 0.554819] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
|
444
|
[ 0.555192] c0 usbcore: registered new interface driver usblp
|
445
|
[ 0.555223] c0 Initializing USB Mass Storage driver...
|
446
|
[ 0.555394] c0 usbcore: registered new interface driver usb-storage
|
447
|
[ 0.555427] c0 USB Mass Storage support registered.
|
448
|
[ 0.555506] c0 otg pdata e414a7a0, irq c0a20534
|
449
|
[ 0.555794] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
|
450
|
[ 0.555831] c0 s3c-udc : version 15 March 2009
|
451
|
[ 0.555857] c0 init
|
452
|
[ 0.556346] c0 usb: android_bind disconnect
|
453
|
[ 0.556372] c0 usb: usb_gadget_disconnect
|
454
|
[ 0.558357] c0 usb: usb_string_id cdev(0xe43192a0)->next_string_id=1
|
455
|
[ 0.558519] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
|
456
|
[ 0.558558] c0 android_usb gadget: Number of LUNs=2
|
457
|
[ 0.558587] c0 lun0: LUN: removable file: (no medium)
|
458
|
[ 0.558616] c0 lun1: LUN: removable file: (no medium)
|
459
|
[ 0.559457] c0 usb: usb_string_id cdev(0xe43192a0)->next_string_id=2
|
460
|
[ 0.559492] c0 usb: usb_string_id cdev(0xe43192a0)->next_string_id=3
|
461
|
[ 0.559532] c0 usb: usb_string_id cdev(0xe43192a0)->next_string_id=4
|
462
|
[ 0.559566] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
|
463
|
[ 0.559596] c0 usb: composite_bind bcdDevice=0x0
|
464
|
[ 0.559621] c0 usb: composite_bind composite_manufacturer=
|
465
|
[ 0.559655] c0 android_usb gadget: android_usb ready
|
466
|
[ 0.559681] c0 usb: Skip udc_enable
|
467
|
[ 0.560817] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
|
468
|
[ 0.561074] c0 [keys]PWR 0
|
469
|
[ 0.561597] c0 input: sec_touchscreen as /devices/virtual/input/input2
|
470
|
[ 0.680507] c0 Atmel MXT224 3-004a: family = 0x80, variant = 0x1, version= 0x16, build = 171
|
471
|
[ 0.680553] c0 [TSP] family = 0x80, variant = 0x1, version = 0x16, build = 171
|
472
|
[ 0.694568] c0 [TSP] TSP chip is MXT224
|
473
|
[ 0.765032] c0 [TSP] ta_status is 0
|
474
|
[ 0.766879] c0 [TSP] mxt224_ta_probe
|
475
|
[ 0.771046] c0 [TSP]TA_probe MXT224 T9 Byte7 is 55
|
476
|
[ 0.776135] c0 [TSP] calibration success!!!
|
477
|
[ 0.805052] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: enable WTSR
|
478
|
[ 0.830050] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_smpl: enable SMPL
|
479
|
[ 0.855185] c0 max8997_rtc_enable_smpl: WTSR_SMPL(0xc3)
|
480
|
[ 0.856413] c0 using rtc device, max8997-rtc, for alarms
|
481
|
[ 0.856470] c0 max8997-rtc max8997-rtc: rtc core: registered max8997-rtc as rtc0
|
482
|
[ 0.856812] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
|
483
|
[ 0.856950] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling
|
484
|
[ 0.857018] c0 s3c-rtc exynos-rtc: warning: invalid RTC value so initializing it
|
485
|
[ 0.857289] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
|
486
|
[ 0.857479] c0 i2c /dev entries driver
|
487
|
[ 0.860274] c0 lirc_dev: IR Remote Control driver registered, major 250
|
488
|
[ 0.860311] c0 IR NEC protocol handler initialized
|
489
|
[ 0.860337] c0 IR RC5(x) protocol handler initialized
|
490
|
[ 0.860364] c0 IR RC6 protocol handler initialized
|
491
|
[ 0.860389] c0 IR JVC protocol handler initialized
|
492
|
[ 0.860415] c0 IR Sony protocol handler initialized
|
493
|
[ 0.860441] c0 IR RC5 (streamzap) protocol handler initialized
|
494
|
[ 0.860471] c0 IR LIRC bridge handler initialized
|
495
|
[ 0.860496] c0 Linux video capture interface: v2.00
|
496
|
[ 0.860803] c0 [S5K5BAFX] s5k5bafx_create_sysfs
|
497
|
[ 0.861271] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
|
498
|
[ 0.861337] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
|
499
|
[ 0.861519] c0 Initialize JPEG driver
|
500
|
[ 0.862012] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
|
501
|
[ 0.862265] c0 s5p_int_src_ext_hpd()
|
502
|
[ 0.862292] c0 s5p_hpd_read_gpio(0)
|
503
|
[ 0.862477] c0 s5p_hpd_read_gpio(0)
|
504
|
[ 0.862908] c0 i2c i2c-7: attached s5p_ddc into i2c adapter successfully
|
505
|
[ 0.863063] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
|
506
|
[ 0.863099] c0 i2c-core: driver [s5p_ddc] using legacy resume method
|
507
|
[ 0.863594] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully
|
508
|
[ 0.864506] c0 sii9234_cfg_gpio()
|
509
|
[ 0.864538] c0 Registered chained gpio int handler for interrupt 111.
|
510
|
[ 0.864585] c0 Registered interrupt support for gpio group 10.
|
511
|
[ 0.864619] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
|
512
|
[ 0.864854] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
|
513
|
[ 0.864960] c0 sii9234 : create mhl sysfile
|
514
|
[ 0.865680] c0 input: sii9234_rcp as /devices/virtual/input/input3
|
515
|
[ 0.866652] c0 max8997-charger max8997-charger: max8997_charger_probe : MAX8997 Charger Driver Loading
|
516
|
[ 0.868509] c0 max8922-charger max8922-charger: max8922_probe : MAX8922 Charger Driver Loading
|
517
|
[ 0.868617] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
|
518
|
[ 0.868865] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
|
519
|
[ 0.868980] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
|
520
|
[ 0.869048] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
|
521
|
[ 0.869431] c0 max17042 9-0036: max17042_probe: MAX17042 Driver Loading
|
522
|
[ 0.869548] c1 max8997-charger max8997-charger: max8997_chg_charger_irq: charger IRQ(1) occurred!
|
523
|
[ 0.869758] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
|
524
|
[ 0.869797] c1 max8997 5-0066: Unused interrupt source: 0x0
|
525
|
[ 0.870386] c0 max17042 9-0036: max17042_probe : is enable (1)
|
526
|
[ 0.870420] c0 max17042 9-0036: max17042_init_regs
|
527
|
[ 0.871542] c0 max17042 9-0036: fuel alert soc (2)
|
528
|
[ 0.871569] c0 max17042 9-0036: max17042_alert_init
|
529
|
[ 0.873182] c1 wake enabled for irq 371
|
530
|
[ 0.874307] c1 max17042 9-0036: max17042_irq_init : config_reg(2314) irq(371)
|
531
|
[ 0.874954] c1 max17042 9-0036: MAX17042 Fuel-Gauge Ver 1460
|
532
|
[ 0.875033] c1 max17042 9-0036: max17042_probe: MAX17042 Driver Loaded
|
533
|
[ 0.875304] c1 i2c-core: driver [max17042] using legacy suspend method
|
534
|
[ 0.875340] c1 i2c-core: driver [max17042] using legacy resume method
|
535
|
[ 0.876201] c1 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
|
536
|
[ 0.876284] c1 Bluetooth: HCI UART driver ver 2.2
|
537
|
[ 0.876313] c1 Bluetooth: HCI H4 protocol initialized
|
538
|
[ 0.876801] c1 cpuidle: using governor ladder
|
539
|
[ 0.877503] c1 cpuidle: using governor menu
|
540
|
[ 0.877652] c1 mshci: Mobile Storage Host Controller Interface driver
|
541
|
[ 0.877687] c1 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
|
542
|
[ 0.877866] c1 dw_mmc dw_mmc: clock source 0: sclk_dwmci (90316800 Hz)
|
543
|
[ 0.878137] c1 mmc0: Version ID 0x5342230a.
|
544
|
[ 0.883459] c1 max17042 9-0036: max17042_get_soc : soc(0df4)
|
545
|
[ 0.883492] c1 max17042_need_soc_recal: HW(0xe)
|
546
|
[ 0.883521] c1 max17042 9-0036: max17042_get_soc : use raw (13), soc (13)
|
547
|
[ 0.884506] c1 mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
|
548
|
[ 0.884989] c1 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
|
549
|
[ 0.885288] c1 sdhci: Secure Digital Host Controller Interface driver
|
550
|
[ 0.885322] c1 sdhci: Copyright(c) Pierre Ossman
|
551
|
[ 0.885440] c1 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (8888888 Hz)
|
552
|
[ 0.885691] c1 mmc1: vtf_2.8v regulator found
|
553
|
[ 0.885880] c1 Registered led device: mmc1::
|
554
|
[ 0.886805] c0 sdhci_set_ios : MMC Card ON samsung-hsmmc
|
555
|
[ 0.886857] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
|
556
|
[ 0.887049] c0 wake enabled for irq 380
|
557
|
[ 0.887075] c0 mmc1: card removed.
|
558
|
[ 0.887166] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
|
559
|
[ 0.887244] c0 mmc2: no vmmc regulator found
|
560
|
[ 0.890287] c0 Registered led device: mmc2::
|
561
|
[ 0.890532] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
|
562
|
[ 0.896266] c0 usbcore: registered new interface driver usbhid
|
563
|
[ 0.896299] c0 usbhid: USB HID core driver
|
564
|
[ 0.896810] c0 logger: created 2048K log 'log_main'
|
565
|
[ 0.897014] c0 logger: created 256K log 'log_events'
|
566
|
[ 0.897214] c0 logger: created 1024K log 'log_radio'
|
567
|
[ 0.897415] c0 logger: created 256K log 'log_system'
|
568
|
[ 0.897616] c0 logger: created 256K log 'log_sf'
|
569
|
[ 0.897647] c0 sec_getlog_supply_loggerinfo: 0xc129a0f4 0xc119a0f4 0xc115a0f4 0xc111a0f4
|
570
|
[ 0.898048] c0 k3dh_probe: is started.
|
571
|
[ 0.898419] c0 using defualt position
|
572
|
[ 0.901180] c0 k3dh_probe: is successful.
|
573
|
[ 0.901832] c0 input: gyro_sensor as /devices/virtual/input/input4
|
574
|
[ 0.902742] c0 akm8975_probe is called.
|
575
|
[ 0.904393] c0 akm8975_probe: asa_x = 170, asa_y = 170, asa_z = 180
|
576
|
[ 0.904924] c0 Registered sensors device: magnetic_sensor
|
577
|
[ 0.904966] c0 akm8975_probe is successful.
|
578
|
[ 0.915491] c0 mmc0: cmd 52 response timeout error
|
579
|
[ 0.919160] c0 mmc0: cmd 52 response timeout error
|
580
|
[ 0.927198] c0 mmc0: cmd 8 response timeout error
|
581
|
[ 0.930886] c0 mmc0: cmd 5 response timeout error
|
582
|
[ 0.935460] c0 mmc0: cmd 5 response timeout error
|
583
|
[ 0.940130] c0 mmc0: cmd 5 response timeout error
|
584
|
[ 0.944818] c0 mmc0: cmd 5 response timeout error
|
585
|
[ 0.949539] c0 mmc0: cmd 55 response timeout error
|
586
|
[ 0.954310] c0 mmc0: cmd 55 response timeout error
|
587
|
[ 0.959086] c0 mmc0: cmd 55 response timeout error
|
588
|
[ 0.963868] c0 mmc0: cmd 55 response timeout error
|
589
|
[ 0.968583] c0 cm3663_setup_reg: initial proximity value = 0
|
590
|
[ 0.978240] c0 input: proximity_sensor as /devices/virtual/input/input5
|
591
|
[ 0.978870] c0 input: light_sensor as /devices/virtual/input/input6
|
592
|
[ 0.981561] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
|
593
|
[ 0.981680] c0 audss_init: RCLK SRC[busclk]
|
594
|
[ 0.981775] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
|
595
|
[ 0.981997] c0 pmu_debug: 0x00000900
|
596
|
[ 0.991743] c0 mmc0: VYL00M: 15010056594c30304d199b717c5d6ed9
|
597
|
[ 0.992577] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
|
598
|
[ 0.992619] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
|
599
|
[ 0.992655] c0 i2s_txctrl: Turn Off - spr is no active
|
600
|
[ 0.992698] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
|
601
|
[ 0.992732] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
|
602
|
[ 1.052304] c0 asoc: mc1n2-da0i <-> samsung-i2s.0 mapping ok
|
603
|
[ 1.053232] c0 Samsung SRP driver, (c) 2010 Samsung Electronics
|
604
|
[ 1.059949] c0 SRP: Driver successfully probed
|
605
|
[ 1.060185] c0 ALSA device list:
|
606
|
[ 1.060207] c0 #0: U1-YMU823
|
607
|
[ 1.060358] c0 GACT probability NOT on
|
608
|
[ 1.060387] c0 Mirror/redirect action on
|
609
|
[ 1.060412] c0 u32 classifier
|
610
|
[ 1.060429] c0 Actions configured
|
611
|
[ 1.060452] c0 Netfilter messages via NETLINK v0.30.
|
612
|
[ 1.060534] c0 nf_conntrack version 0.5.0 (12471 buckets, 49884 max)
|
613
|
[ 1.061434] c0 ctnetlink v0.93: registering with nfnetlink.
|
614
|
[ 1.061497] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
|
615
|
[ 1.061534] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
|
616
|
[ 1.061902] c0 xt_time: kernel timezone is -0000
|
617
|
[ 1.063407] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
|
618
|
[ 1.063590] c0 arp_tables: (C) 2002 David S. Miller
|
619
|
[ 1.063666] c0 TCP cubic registered
|
620
|
[ 1.064776] c0 NET: Registered protocol family 10
|
621
|
[ 1.067349] c1 mmc0 : 00 : 25 : 20110416 : 0.
|
622
|
[ 1.067529] c0 Mobile IPv6
|
623
|
[ 1.067576] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
|
624
|
[ 1.067852] c0 IPv6 over IPv4 tunneling driver
|
625
|
[ 1.068673] c1 mmc0: Voltage range not supported for power class.
|
626
|
[ 1.068709] c1 mmc0: power class selection to bus width 8 failed
|
627
|
[ 1.073561] c1 mmc0: Voltage range not supported for power class.
|
628
|
[ 1.073614] c1 mmc0: power class selection to bus width 8 ddr 2 failed
|
629
|
[ 1.079988] c1 mmc0: new high speed DDR MMC card at address 0001
|
630
|
[ 1.080507] c1 mmcblk0: mmc0:0001 VYL00M 14.6 GiB
|
631
|
[ 1.081845] c0 NET: Registered protocol family 17
|
632
|
[ 1.081916] c0 NET: Registered protocol family 15
|
633
|
[ 1.082055] c0 Bluetooth: RFCOMM TTY layer initialized
|
634
|
[ 1.082114] c0 Bluetooth: RFCOMM socket layer initialized
|
635
|
[ 1.082145] c0 Bluetooth: RFCOMM ver 1.11
|
636
|
[ 1.082169] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
|
637
|
[ 1.082200] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
|
638
|
[ 1.082519] c0 NET: Registered protocol family 35
|
639
|
[ 1.082995] c0 Registering the dns_resolver key type
|
640
|
[ 1.083048] c0 EXYNOS4210: Adaptive Support Voltage init
|
641
|
[ 1.083284] c0 exynos4210_check_vdd_arm: current vdd_arm(1350000uV), set vdd_arm (1.2V)
|
642
|
[ 1.083870] c0 EXYNOS4: HPM value = 19
|
643
|
[ 1.083925] c0 EXYNOS4: IDS value = 26
|
644
|
[ 1.083948] c0 <6>Support 1.2GHz
|
645
|
[ 1.083968] c0 <6>ASV Group for This Exynos4210 is 0x40000004
|
646
|
[ 1.084007] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
|
647
|
[ 1.084071] c0 Registering SWP/SWPB emulation handler
|
648
|
[ 1.084104] c0 Registering SDIV/UDIV emulation handler
|
649
|
[ 1.084140] c0 DVFS : VDD_ARM Voltage table set with 4 Group
|
650
|
[ 1.084170] c0 max8997_set_arm_voltage_table
|
651
|
[ 1.084202] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[1]=1250000, buck1_vol[1]=24
|
652
|
[ 1.084399] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[2]=1150000, buck1_vol[2]=20
|
653
|
[ 1.084594] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[3]=1050000, buck1_vol[3]=16
|
654
|
[ 1.084789] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[4]=975000, buck1_vol[4]=13
|
655
|
[ 1.084981] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[5]=950000, buck1_vol[5]=12
|
656
|
[ 1.085267] c0 max8997-pmic max8997-pmic: max8997_set_buck1_dvs_table: enable BUCK1 GPIO DVS
|
657
|
[ 1.085726] c0 DVFS : VDD_INT Voltage table set with 4 Group
|
658
|
[ 1.086209] c0 exynos4_pm_hotplug_device_init: 0
|
659
|
[ 1.086237] c0 EXYNOS4 PM-hotplug init function
|
660
|
[ 1.086680] c0 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x154/0x5bc):
|
661
|
[ 1.086722] c0 s5p-ehci s5p-ehci: usb phy usage(2)
|
662
|
[ 1.086936] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
|
663
|
[ 1.086966] c1 GPT:Primary header thinks Alt. header is not at the end of the disk.
|
664
|
[ 1.087005] c1 GPT:30775295 != 30777343
|
665
|
[ 1.087026] c1 GPT:Alternate GPT header not at the end of the disk.
|
666
|
[ 1.087057] c1 GPT:30775295 != 30777343
|
667
|
[ 1.087078] c1 GPT: Use GNU Parted to correct GPT errors.
|
668
|
[ 1.087200] c1 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
|
669
|
[ 1.088473] c1 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
|
670
|
[ 1.088730] c1 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
|
671
|
[ 1.095063] c1 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
|
672
|
[ 1.095158] c1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
|
673
|
[ 1.095200] c1 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
674
|
[ 1.095242] c1 usb usb1: Product: S5P EHCI Host Controller
|
675
|
[ 1.095273] c1 usb usb1: Manufacturer: Linux 3.0.101-replicant ehci_hcd
|
676
|
[ 1.095309] c1 usb usb1: SerialNumber: s5p-ehci
|
677
|
[ 1.095921] c1 hub 1-0:1.0: USB hub found
|
678
|
[ 1.095959] c1 hub 1-0:1.0: 3 ports detected
|
679
|
[ 1.096338] c1 CP not ready, Active State low
|
680
|
[ 1.096482] c1 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 3, 2nd_throttle = 5
|
681
|
[ 1.096522] c1 @@@ get_refresh_interval = 0x2e
|
682
|
[ 1.096548] c1 @@@ get_refresh_interval = 0x5d
|
683
|
[ 1.096581] c1 ** temperature set value **
|
684
|
[ 1.096602] c1 1st throttling stop_temp = 61, start_temp = 64
|
685
|
[ 1.096632] c1 2nd throttling stop_temp = 87, start_tmep = 103
|
686
|
[ 1.096663] c1 tripping temp = 110, s/w emergency temp = 120
|
687
|
[ 1.096695] c1 mem throttling stop_temp = 80, start_temp = 85
|
688
|
[ 1.096852] c1 exynos4210_tmu_init: triminfo = 0x0000004c, low 8bit = 0x4c, high 24 bit = 0x000000
|
689
|
[ 1.096908] c1 THD_TEMP:0x70: TRIG_LEV0: 0x03
|
690
|
[ 1.096930] c1 TRIG_LEV1: 0x2a TRIG_LEV2: 0x31, TRIG_LEV3: 0xff
|
691
|
[ 1.123665] c0 sdhci_set_ios : MMC Card OFF samsung-hsmmc
|
692
|
[ 1.151587] c1 [MODEM_IF] init_modem
|
693
|
[ 1.151624] c1 check phone active = 94
|
694
|
[ 1.153917] c1 umts_modem_cfg_gpio done
|
695
|
[ 1.153951] c1 modem_link_pm_config_gpio done
|
696
|
[ 1.154204] c1 mif: modem_probe: modem_if
|
697
|
[ 1.158854] c0 mif: phone_active_irq_handler: PA EVENT : reset =0, pa=0, cp_dump=0
|
698
|
[ 1.158982] c1 wake enabled for irq 366
|
699
|
[ 1.159008] c1 mif: create_modemctl_device: xmm6260 is created!!!
|
700
|
[ 1.159452] c1 wake enabled for irq 361
|
701
|
[ 1.159711] c1 usbcore: registered new interface driver cdc_modem
|
702
|
[ 1.159758] c1 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe4281000)
|
703
|
[ 1.159797] c1 mif: hsic_create_link_device: usb : create_link_device DONE
|
704
|
[ 1.159833] c1 mif: modem_probe: link created: usb
|
705
|
[ 1.163573] c1 mif: create_io_device: Bood device = umts_boot0
|
706
|
[ 1.172579] c1 mif: modem_probe: Complete!!!
|
707
|
[ 1.174543] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on
|
708
|
[ 1.176253] c0 OTG s5pc110_otg_module_init(380): s3c_otg_module_init
|
709
|
[ 1.176431] c0 otg host_probe start c0a0debc
|
710
|
[ 1.380070] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
|
711
|
[ 1.380141] c0 [TouchKey] i2c_touchkey_probe
|
712
|
[ 1.380452] c0 input: sec_touchkey as /devices/virtual/input/input7
|
713
|
[ 1.436038] c0 [TouchKey] Module Version: 12
|
714
|
[ 1.436144] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
|
715
|
[ 1.443424] c0 max8997-rtc max8997-rtc: setting system clock to 2017-08-30 20:59:50 UTC (1504126790)
|
716
|
[ 1.443915] c0 ctrl->mem.size = 0x500000
|
717
|
[ 1.443995] c0 ctrl->mem.base = 0x70f3c000
|
718
|
[ 1.444423] c0
|
719
|
[ 1.444461] c0
|
720
|
[ 1.444495] c0
|
721
|
[ 1.444531] c0 cam_cfg_gpio: pdev->id=0
|
722
|
[ 1.445842] c0 FIMC0 registered successfully
|
723
|
[ 1.446276] c0 ctrl->mem.size = 0x0
|
724
|
[ 1.446351] c0 ctrl->mem.base = 0xffffffea
|
725
|
[ 1.447491] c0 FIMC1 registered successfully
|
726
|
[ 1.447932] c0 ctrl->mem.size = 0x1900000
|
727
|
[ 1.448013] c0 ctrl->mem.base = 0x6f63c000
|
728
|
[ 1.449147] c0 FIMC2 registered successfully
|
729
|
[ 1.449570] c0 ctrl->mem.size = 0x700000
|
730
|
[ 1.449651] c0 ctrl->mem.base = 0x6ef3c000
|
731
|
[ 1.450837] c0 FIMC3 registered successfully
|
732
|
[ 1.451780] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
|
733
|
[ 1.484513] c0 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
|
734
|
[ 1.484660] c0 sec-battery sec-battery: sec_bat_probe: use sub-charger (max8922-charger)
|
735
|
[ 1.485638] c0 sec_bat_get_lpcharging_state: LP charging:0
|
736
|
[ 1.489501] c1 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loaded
|
737
|
[ 1.490734] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
|
738
|
[ 1.491086] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
|
739
|
[ 1.491991] c0 sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=774
|
740
|
[ 1.492163] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
|
741
|
[ 1.492370] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
|
742
|
[ 1.492527] c0 sec-battery sec-battery: soc(13), vfocv(3731), vcell(3766), temp(35), charging(1), health(1), chg_adc(0)
|
743
|
[ 1.498487] c1 Warning: unable to open an initial console.
|
744
|
[ 1.503279] c1 Freeing init memory: 7072K
|
745
|
[ 1.659587] c1 init: init started!
|
746
|
[ 1.679171] c1 SELinux: 2048 avtab hash slots, 5220 rules.
|
747
|
[ 1.690338] c1 SELinux: 2048 avtab hash slots, 5220 rules.
|
748
|
[ 1.690460] c1 SELinux: 1 users, 2 roles, 567 types, 0 bools, 1 sens, 1024 cats
|
749
|
[ 1.690580] c1 SELinux: 87 classes, 5220 rules
|
750
|
[ 1.696808] c1 SELinux: Completing initialization.
|
751
|
[ 1.696886] c1 SELinux: Setting up existing superblocks.
|
752
|
[ 1.697023] c1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
|
753
|
[ 1.697169] c1 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
|
754
|
[ 1.697457] c1 SELinux: initialized (dev bdev, type bdev), not configured for labeling
|
755
|
[ 1.697609] c1 SELinux: initialized (dev proc, type proc), uses genfs_contexts
|
756
|
[ 1.697777] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
|
757
|
[ 1.697943] c1 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
|
758
|
[ 1.699329] c1 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
|
759
|
[ 1.699461] c1 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
|
760
|
[ 1.699578] c1 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
|
761
|
[ 1.699737] c1 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
|
762
|
[ 1.699900] c1 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
|
763
|
[ 1.700297] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
|
764
|
[ 1.700494] c1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
|
765
|
[ 1.868197] c1 type=1403 audit(1504126790.920:2): policy loaded auid=4294967295 ses=4294967295
|
766
|
[ 1.870410] c1 type=1404 audit(1504126790.925:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
|
767
|
[ 2.081001] c1 init: (Initializing SELinux enforcing took 0.42s.)
|
768
|
[ 2.119994] c0 init: init second stage started!
|
769
|
[ 2.150175] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
|
770
|
[ 2.150993] c0 exynos4_handler_tmu_state: inform to init state to platform.
|
771
|
[ 2.242330] c0 init: waitpid failed: No child processes
|
772
|
[ 2.246881] c0 init: (Loading properties from /default.prop took 0.00s.)
|
773
|
[ 2.250197] c0 init: (Parsing /init.environ.rc took 0.00s.)
|
774
|
[ 2.250739] c0 init: (Parsing /init.usb.rc took 0.00s.)
|
775
|
[ 2.251268] c0 init: /init.smdk4210.rc: 49: invalid command 'socket'
|
776
|
[ 2.257276] c0 init: (Parsing init.smdk4210.usb.rc took 0.00s.)
|
777
|
[ 2.257386] c0 init: (Parsing /init.smdk4210.rc took 0.01s.)
|
778
|
[ 2.258140] c0 init: (Parsing /init.usb.configfs.rc took 0.00s.)
|
779
|
[ 2.258319] c0 init: (Parsing /init.zygote32.rc took 0.00s.)
|
780
|
[ 2.258566] c0 init: (Parsing /init.trace.rc took 0.00s.)
|
781
|
[ 2.259406] c0 init: (Parsing /init.superuser.rc took 0.00s.)
|
782
|
[ 2.259499] c0 init: (Parsing /init.cm.rc took 0.00s.)
|
783
|
[ 2.259585] c0 init: (Parsing /init.rc took 0.01s.)
|
784
|
[ 2.260172] c0 sec_bat_get_lpcharging_state: LP charging:0
|
785
|
[ 2.260561] c0 init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
|
786
|
[ 2.269310] c0 init: Starting service 'ueventd'...
|
787
|
[ 2.270253] c0 init: Waiting for /dev/.coldboot_done...
|
788
|
[ 2.272208] c0 ueventd: ueventd started!
|
789
|
[ 2.395859] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
|
790
|
[ 2.490348] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
|
791
|
[ 2.490906] c0 sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=783
|
792
|
[ 2.490962] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
|
793
|
[ 2.491043] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
|
794
|
[ 2.491103] c0 sec-battery sec-battery: soc(13), vfocv(3731), vcell(3766), temp(35), charging(1), health(1), chg_adc(0)
|
795
|
[ 2.549330] c1 ueventd: Coldboot took 0.27s.
|
796
|
[ 2.556125] c0 init: Waiting for /dev/.coldboot_done took 0.29s.
|
797
|
[ 2.556246] c0 init: /dev/hw_random not found
|
798
|
[ 2.559233] c0 keychord: using input dev max8997-muic for fevent
|
799
|
[ 2.559276] c0 keychord: using input dev gpio-keys for fevent
|
800
|
[ 2.559328] c0 keychord: using input dev sii9234_rcp for fevent
|
801
|
[ 2.585166] c0 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
|
802
|
[ 2.585536] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
|
803
|
[ 2.610158] c0 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
|
804
|
[ 2.611363] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
|
805
|
[ 2.614313] c0 init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
|
806
|
[ 2.614878] c0 init: write_file: Unable to open '/proc/sys/net/ipv4/fwmark_reflect': No such file or directory
|
807
|
[ 2.615000] c0 init: write_file: Unable to open '/proc/sys/net/ipv6/fwmark_reflect': No such file or directory
|
808
|
[ 2.615154] c0 init: write_file: Unable to open '/proc/sys/net/ipv4/tcp_fwmark_accept': No such file or directory
|
809
|
[ 2.695203] c0 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
|
810
|
[ 2.695618] c0 init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
|
811
|
[ 2.701420] c0 init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
|
812
|
[ 2.703165] c0 init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
|
813
|
[ 2.713356] c0 init: /dev/hw_random not found
|
814
|
[ 2.731360] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
|
815
|
[ 2.731569] c1 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
|
816
|
[ 2.732191] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p9,target=/system,type=ext4)=0
|
817
|
[ 2.734083] c1 F2FS-fs (mmcblk0p7): Magic Mismatch, valid(0xf2f52010) - read(0x1900)
|
818
|
[ 2.734230] c1 F2FS-fs (mmcblk0p7): Can't find valid F2FS filesystem in 1th superblock
|
819
|
[ 2.741653] c1 F2FS-fs (mmcblk0p7): Magic Mismatch, valid(0xf2f52010) - read(0x0)
|
820
|
[ 2.741795] c1 F2FS-fs (mmcblk0p7): Can't find valid F2FS filesystem in 2th superblock
|
821
|
[ 2.770276] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p7,target=/cache,type=f2fs)=-1
|
822
|
[ 2.825121] c1 EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
|
823
|
[ 2.825358] c1 SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
|
824
|
[ 2.827671] c1 fs_mgr: check_fs(): mount(/dev/block/mmcblk0p7,/cache,ext4)=0: Success
|
825
|
[ 2.850282] c1 fs_mgr: check_fs(): unmount(/cache) succeeded
|
826
|
[ 2.851693] c1 fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p7
|
827
|
[ 3.070823] c1 e2fsck: e2fsck 1.42.9 (28-Dec-2013)
|
828
|
[ 3.070916] c1
|
829
|
[ 3.071209] c1 e2fsck: /dev/block/mmcblk0p7: clean, 39/6400 files, 1689/25600 blocks
|
830
|
[ 3.071329] c1
|
831
|
[ 3.081557] c1 EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic
|
832
|
[ 3.081815] c1 SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
|
833
|
[ 3.082235] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p7,target=/cache,type=ext4)=0
|
834
|
[ 3.082499] c1 fs_mgr: mount_with_alternatives(): Mounted /dev/block/mmcblk0p7 on /cache with fs_type=ext4 instead of f2fs
|
835
|
[ 3.122854] c1 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
|
836
|
[ 3.123098] c1 SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
|
837
|
[ 3.123499] c1 fs_mgr: check_fs(): mount(/dev/block/mmcblk0p1,/efs,ext4)=0: Success
|
838
|
[ 3.145279] c0 fs_mgr: check_fs(): unmount(/efs) succeeded
|
839
|
[ 3.145483] c0 fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p1
|
840
|
[ 3.150238] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
|
841
|
[ 3.152381] c0 normal: free cpufreq_limit & interrupt enable.
|
842
|
[ 3.264203] c0 e2fsck: e2fsck 1.42.9 (28-Dec-2013)
|
843
|
[ 3.264293] c0
|
844
|
[ 3.264471] c0 e2fsck: /dev/block/mmcblk0p1: clean, 69/1280 files, 2198/5120 blocks
|
845
|
[ 3.264603] c0
|
846
|
[ 3.279696] c0 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic
|
847
|
[ 3.279946] c0 SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
|
848
|
[ 3.280454] c0 fs_mgr: __mount(source=/dev/block/mmcblk0p1,target=/efs,type=ext4)=0
|
849
|
[ 3.282285] c0 F2FS-fs (mmcblk0p10): Magic Mismatch, valid(0xf2f52010) - read(0x20000)
|
850
|
[ 3.282442] c0 F2FS-fs (mmcblk0p10): Can't find valid F2FS filesystem in 1th superblock
|
851
|
[ 3.290216] c0 F2FS-fs (mmcblk0p10): Magic Mismatch, valid(0xf2f52010) - read(0x0)
|
852
|
[ 3.290356] c0 F2FS-fs (mmcblk0p10): Can't find valid F2FS filesystem in 2th superblock
|
853
|
[ 3.315311] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p10,target=/data,type=f2fs)=-1
|
854
|
[ 3.335587] c1 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
|
855
|
[ 3.335817] c1 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
|
856
|
[ 3.336207] c1 fs_mgr: check_fs(): mount(/dev/block/mmcblk0p10,/data,ext4)=0: Success
|
857
|
[ 3.485228] c1 fs_mgr: check_fs(): unmount(/data) succeeded
|
858
|
[ 3.485432] c1 fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p10
|
859
|
[ 3.490727] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
|
860
|
[ 3.491796] c1 sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=778
|
861
|
[ 3.491983] c1 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
|
862
|
[ 3.492254] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
|
863
|
[ 3.492435] c1 sec-battery sec-battery: soc(13), vfocv(3731), vcell(3766), temp(35), charging(1), health(1), chg_adc(0)
|
864
|
[ 3.540179] c0 max8997-muic max8997-muic: max8997_muic_init_detect
|
865
|
[ 3.540599] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x41
|
866
|
[ 3.540732] c0 max8997-muic max8997-muic: detect_dev: ATTACHED
|
867
|
[ 3.540860] c0 max8997-muic max8997-muic: attach_usb: duplicated(USB)
|
868
|
[ 3.660095] c1 e2fsck: e2fsck 1.42.9 (28-Dec-2013)
|
869
|
[ 3.660157] c1
|
870
|
[ 3.660245] c1 e2fsck: /dev/block/mmcblk0p10: clean, 1944/131072 files, 96726/524284 blocks
|
871
|
[ 3.660338] c1
|
872
|
[ 3.667702] c1 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,journal_async_commit,errors=panic
|
873
|
[ 3.667884] c1 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
|
874
|
[ 3.668092] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p10,target=/data,type=ext4)=0
|
875
|
[ 3.668212] c1 fs_mgr: mount_with_alternatives(): Mounted /dev/block/mmcblk0p10 on /data with fs_type=ext4 instead of f2fs
|
876
|
[ 3.703284] c1 EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: journal_async_commit
|
877
|
[ 3.703409] c1 SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
|
878
|
[ 3.703550] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p12,target=/preload,type=ext4)=0
|
879
|
[ 3.706529] c0 zram0: detected capacity change from 0 to 268435456
|
880
|
[ 3.779919] c0 Adding 262140k swap on /dev/block/zram0. Priority:-1 extents:1 across:262140k SS
|
881
|
[ 3.794422] c0 init: Starting service 'logd'...
|
882
|
[ 3.839445] c0 init: (Loading properties from /system/build.prop took 0.02s.)
|
883
|
[ 3.839632] c0 init: (Loading properties from /vendor/build.prop took 0.00s.)
|
884
|
[ 3.839755] c0 init: (Loading properties from /factory/factory.prop took 0.00s.)
|
885
|
[ 3.844557] c0 init: Starting service 'vold'...
|
886
|
[ 3.848122] c0 init: Not bootcharting.
|
887
|
[ 3.877600] c1 logd.auditd: start
|
888
|
[ 3.877683] c1 logd.klogd: 3877645212
|
889
|
[ 4.152717] c1 init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...
|
890
|
[ 4.178650] c1 init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 1875) exited with status 0
|
891
|
[ 4.210134] c0 i2c-core: driver [Si4709] using legacy suspend method
|
892
|
[ 4.210177] c0 i2c-core: driver [Si4709] using legacy resume method
|
893
|
[ 4.233865] c0 mdnie mdnie: scenario_store :: value=0
|
894
|
[ 4.233908] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
|
895
|
[ 4.234005] c0 mdnie mdnie: mode_store :: value=1
|
896
|
[ 4.234039] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
|
897
|
[ 4.243255] c0 init: Starting service 'sysinit'...
|
898
|
[ 4.244243] c0 init: (Loading properties from /data/local.prop took 0.00s.)
|
899
|
[ 4.406775] c0 init: Starting service 'logd-reinit'...
|
900
|
[ 4.412088] c0 init: Starting service 'healthd'...
|
901
|
[ 4.413130] c0 init: Starting service 'lmkd'...
|
902
|
[ 4.414001] c0 init: Starting service 'servicemanager'...
|
903
|
[ 4.414848] c0 init: Starting service 'surfaceflinger'...
|
904
|
[ 4.417435] c1 binder: 1932:1932 transaction failed 29189, size 0-0
|
905
|
[ 4.420970] c0 init: property_set("ro.nfc.port", "I2C") failed
|
906
|
[ 4.441293] c0 init: using deprecated syntax for specifying property 'ro.manufacturer', use ${name} instead
|
907
|
[ 4.458228] c0 failed to copy MFC F/W during init
|
908
|
[ 4.463141] c1 logd.daemon: reinit
|
909
|
[ 4.466201] c0 init: property 'ro.manufacturer' doesn't exist while expanding '$ro.manufacturer'
|
910
|
[ 4.476958] c0 init: cannot expand '$ro.manufacturer' while writing to '/sys/class/android_usb/android0/iManufacturer'
|
911
|
[ 4.487254] c0 init: Service 'logd-reinit' (pid 1930) exited with status 0
|
912
|
[ 4.487906] c0 init: using deprecated syntax for specifying property 'ro.model', use ${name} instead
|
913
|
[ 4.495887] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
|
914
|
[ 4.495934] c0 init: property 'ro.model' doesn't exist while expanding '$ro.model'
|
915
|
[ 4.495991] c0 init: cannot expand '$ro.model' while writing to '/sys/class/android_usb/android0/iProduct'
|
916
|
[ 4.496085] c0 init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
|
917
|
[ 4.500189] c0 init: SELinux: Could not get canonical path /sys/block/sda/queue/scheduler restorecon: No such file or directory.
|
918
|
[ 4.500319] c0 init: SELinux: Could not get canonical path /sys/block/sde/queue/scheduler restorecon: No such file or directory.
|
919
|
[ 4.500446] c0 init: SELinux: Could not get canonical path /sys/block/dm-0/queue/scheduler restorecon: No such file or directory.
|
920
|
[ 4.503381] c0 init: write_file: Unable to open '/proc/sys/kernel/perf_event_paranoid': No such file or directory
|
921
|
[ 4.503485] c0 init: Starting service 'console'...
|
922
|
[ 4.507123] c0 init: Starting service 'netd'...
|
923
|
[ 4.509811] c0 init: Starting service 'debuggerd'...
|
924
|
[ 4.512460] c0 init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
|
925
|
[ 4.513459] c0 init: Starting service 'ril-daemon'...
|
926
|
[ 4.516063] c0 init: Starting service 'drm'...
|
927
|
[ 4.518584] c0 init: Starting service 'media'...
|
928
|
[ 4.530605] c0 init: Starting service 'installd'...
|
929
|
[ 4.533327] c0 init: Starting service 'keystore'...
|
930
|
[ 4.547626] c0 init: Starting service 'macloader'...
|
931
|
[ 4.559746] c0 init: Starting service 'zygote'...
|
932
|
[ 4.579503] c0 init: Starting service 'gatekeeperd'...
|
933
|
[ 4.607478] c1 sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=777
|
934
|
[ 4.607530] c1 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
|
935
|
[ 4.607588] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
|
936
|
[ 4.607629] c1 sec-battery sec-battery: soc(13), vfocv(3731), vcell(3766), temp(35), charging(1), health(1), chg_adc(0)
|
937
|
[ 4.615888] c0 init: Starting service 'perfprofd'...
|
938
|
[ 4.616634] c0 init: Service 'sysinit' (pid 1923) exited with status 0
|
939
|
[ 4.617176] c0 init: Starting service 'su_daemon'...
|
940
|
[ 4.617790] c0 usb: enable_store enabled=0, !dev->enabled=1
|
941
|
[ 4.617818] c0 usb: usb_gadget_disconnect
|
942
|
[ 4.617986] c0 init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
|
943
|
[ 4.646453] c1 usb: functions_store buff=mtp,adb
|
944
|
[ 4.646487] c1 usb: android_enable_function name=mtp
|
945
|
[ 4.646516] c1 usb: android_enable_function name=adb
|
946
|
[ 4.646634] c1 usb: enable_store enabled=1, !dev->enabled=1
|
947
|
[ 4.646664] c1 usb: enable_store vendor=4e8,product=6860,bcdDevice=226
|
948
|
[ 4.646695] c1 ,Class=0,SubClass=0,Protocol=0
|
949
|
[ 4.646716] c1 usb: enable_store next cmd : usb_add_config
|
950
|
[ 4.646869] c1 init: Starting service 'adbd'...
|
951
|
[ 4.647481] c1 init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
|
952
|
[ 4.662033] c1 type=1400 audit(1504126793.710:4): avc: denied { dac_override } for pid=1950 comm="macloader" capability=1 scontext=u:r:macloader:s0 tcontext=u:r:macloader:s0 tclass=capability permissive=0
|
953
|
[ 4.669777] c1 init: Service 'macloader' (pid 1950) exited with status 255
|
954
|
[ 4.695634] c1 adb_open
|
955
|
[ 4.695661] c1 usb: android_bind_enabled_functions f:mtp
|
956
|
[ 4.695691] c1 mtp_bind_config
|
957
|
[ 4.695714] c1 usb: usb_string_id cdev(0xe43192a0)->next_string_id=1
|
958
|
[ 4.695775] c1 usb: android_bind_enabled_functions f:adb
|
959
|
[ 4.695805] c1 adb_bind_config
|
960
|
[ 4.695835] c1 usb: usb_gadget_connect
|
961
|
[ 4.890765] c1 mif: misc_open: iod = umts_boot0
|
962
|
[ 4.893843] c1 mif: usb_init_communication: 1942:rild
|
963
|
[ 4.893951] c1 mif: xmm6260_off: xmm6260_off()
|
964
|
[ 4.893982] c1 mif: link_pm_ioctl: 6f30
|
965
|
[ 4.894145] c1 store_ehci_power: EHCI turns off
|
966
|
[ 4.894178] c1 s5p-ehci s5p-ehci: remove, state 4
|
967
|
[ 4.894243] c1 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xb0/0x150
|
968
|
[ 4.931569] c0 s5p-ehci s5p-ehci: USB bus 1 deregistered
|
969
|
[ 4.931927] c0 CP not ready, Active State low
|
970
|
[ 4.982139] c0 mif: link_pm_ioctl: 6f31
|
971
|
[ 4.982232] c0 mif: xmm6260_on: xmm6260_on()
|
972
|
[ 5.070372] c0 s3cfb s3cfb.0: [fb0] Alloc dma: 0x7172a000, size: 0x00177000
|
973
|
[ 5.070457] c0 s3cfb s3cfb.0: [fb1] Alloc dma: 0x718a1000, size: 0x00177000
|
974
|
[ 5.070671] c0 s3c-fimc1: FIMC1 1 opened.
|
975
|
[ 5.076221] c1 init: Starting service 'bootanim'...
|
976
|
[ 5.418484] c1 healthd: wakealarm_init: timerfd_create failed
|
977
|
[ 5.424591] c1 healthd: fuelgauge: Unknown power supply type
|
978
|
[ 5.426107] c1 healthd: battery [l=13 v=3766 t=35.0 h=2 st=2] c=0 chg= 2017-08-30 20:59:54.479759211 UTC
|
979
|
[ 5.490247] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
|
980
|
[ 5.490760] c0 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=787
|
981
|
[ 5.490801] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
|
982
|
[ 5.490856] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
|
983
|
[ 5.490895] c0 sec-battery sec-battery: soc(13), vfocv(3731), vcell(3766), temp(33), charging(1), health(1), chg_adc(0)
|
984
|
[ 5.491840] c1 healthd: fuelgauge: Unknown power supply type
|
985
|
[ 5.492285] c1 healthd: battery [l=13 v=3766 t=33.0 h=2 st=2] c=0 chg= 2017-08-30 20:59:54.546949545 UTC
|
986
|
[ 5.535158] c0 mif: link_pm_ioctl: 6f30
|
987
|
[ 5.535385] c0 store_ehci_power: EHCI turns on
|
988
|
[ 5.535443] c0 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x154/0x5bc):
|
989
|
[ 5.535490] c0 [MODEM_IF]Slave Wake
|
990
|
[ 5.535517] c0 mif: set hsic lpa phy init: slave wake-up (1)
|
991
|
[ 5.535554] c0 s5p-ehci s5p-ehci: usb phy usage(2)
|
992
|
[ 5.535753] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
|
993
|
[ 5.539422] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
|
994
|
[ 5.539620] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
|
995
|
[ 5.545795] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
|
996
|
[ 5.545910] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
|
997
|
[ 5.545954] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
998
|
[ 5.545999] c0 usb usb1: Product: S5P EHCI Host Controller
|
999
|
[ 5.546033] c0 usb usb1: Manufacturer: Linux 3.0.101-replicant ehci_hcd
|
1000
|
[ 5.546072] c0 usb usb1: SerialNumber: s5p-ehci
|
1001
|
[ 5.565245] c0 hub 1-0:1.0: USB hub found
|
1002
|
[ 5.565296] c0 hub 1-0:1.0: 3 ports detected
|
1003
|
[ 5.575370] c0 [MODEM_IF]Active States =1, s5p-ehci
|
1004
|
[ 5.629016] c0 mif: link_pm_ioctl: 6f31
|
1005
|
[ 5.629137] c0 mif: link_pm_ioctl: 6f33
|
1006
|
[ 5.679274] c0 mif: link_pm_ioctl: 6f33
|
1007
|
[ 5.729437] c0 mif: link_pm_ioctl: 6f33
|
1008
|
[ 5.780159] c0 mif: link_pm_ioctl: 6f33
|
1009
|
[ 5.830328] c0 mif: link_pm_ioctl: 6f33
|
1010
|
[ 5.880084] c1 usb 1-2: new high speed USB device number 2 using s5p-ehci
|
1011
|
[ 5.880462] c0 mif: link_pm_ioctl: 6f33
|
1012
|
[ 5.930603] c0 mif: link_pm_ioctl: 6f33
|
1013
|
[ 5.934622] c0 s3c-fimc0: FIMC0 1 opened.
|
1014
|
[ 5.934684] c0 fimc_s_input: index 0 FIMC0
|
1015
|
[ 5.934706] c0
|
1016
|
[ 5.934715] c0
|
1017
|
[ 5.934724] c0 fimc_s_input activating subdev
|
1018
|
[ 5.951983] c0 m5mo_isp_isr: **************** interrupt ****************
|
1019
|
[ 5.952102] c1 m5mo_probe
|
1020
|
[ 5.952131] c1 fimc_s_input activated subdev = 0
|
1021
|
[ 5.952569] c1 m5mo_power on
|
1022
|
[ 5.952587] c1 m5mo_power_on: in. hw=0xE
|
1023
|
[ 5.975107] c1 m5mo_power_on: out
|
1024
|
[ 5.975129] c1 s3c_csis_power: in
|
1025
|
[ 5.976208] c0 s3c_csis_power: out
|
1026
|
[ 5.980732] c0 mif: link_pm_ioctl: 6f33
|
1027
|
[ 6.011713] c1 usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11
|
1028
|
[ 6.011767] c1 usb 1-2: New USB device found, idVendor=058b, idProduct=0041
|
1029
|
[ 6.011800] c1 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
|
1030
|
[ 6.030860] c0 mif: link_pm_ioctl: 6f33
|
1031
|
[ 6.031002] c1 mif: if_usb_probe: usbdev = 0xe2b2d800
|
1032
|
[ 6.031031] c1 mif: if_usb_set_pipe: set 0
|
1033
|
[ 6.031054] c1 mif: if_usb_probe: devdata usbdev = 0xe2b2d800
|
1034
|
[ 6.031121] c1 mif: if_usb_probe: successfully done
|
1035
|
[ 6.080994] c0 mif: link_pm_ioctl: 6f33
|
1036
|
[ 6.308646] c0 m5mo_isp_isr: **************** interrupt ****************
|
1037
|
[ 6.313113] c0 m5mo_check_version: *************************************
|
1038
|
[ 6.313150] c0 m5mo_check_version: F/W Version: ONEF01
|
1039
|
[ 6.313175] c0 m5mo_check_version: Binary Released: Feb 18 2017 20:35:41
|
1040
|
[ 6.313207] c0 m5mo_check_version: *************************************
|
1041
|
[ 6.317946] c0 fimc_s_input--: index 0 FIMC0
|
1042
|
[ 6.318025] c0 s3c-fimc2: FIMC2 1 opened.
|
1043
|
[ 6.318081] c0 fimc_s_input: index 0 FIMC2
|
1044
|
[ 6.318162] c0 fimc_s_input--: index 0 FIMC2
|
1045
|
[ 6.318203] c0 fimc_g_ext_ctrls_capture++
|
1046
|
[ 6.318232] c0 fimc_g_ext_ctrls_capture--
|
1047
|
[ 6.318795] c0 id 37, value 90
|
1048
|
[ 6.318814] c0 m5mo_set_jpeg_quality: E, value 90
|
1049
|
[ 6.319502] c0 id 99, value 0
|
1050
|
[ 6.319558] c0 id 90, value 0
|
1051
|
[ 6.319576] c0 m5mo_set_zoom: E, value 0
|
1052
|
[ 6.319897] c0 id 71, value 1
|
1053
|
[ 6.319914] c0 m5mo_set_flash: E, value 1
|
1054
|
[ 6.322528] c0 id 72, value 0
|
1055
|
[ 6.322548] c0 m5mo_set_exposure: E, value 0
|
1056
|
[ 6.323876] c0 id 73, value 1
|
1057
|
[ 6.323894] c0 m5mo_set_whitebalance: E, value 1
|
1058
|
[ 6.324474] c0 id 70, value 1
|
1059
|
[ 6.324493] c0 m5mo_set_scene_mode: E, value 1
|
1060
|
[ 6.325066] c0 m5mo_set_saturation: E, value 2
|
1061
|
[ 6.326401] c0 m5mo_set_sharpness: E, value 2
|
1062
|
[ 6.328147] c0 id 74, value 1
|
1063
|
[ 6.328169] c0 m5mo_set_effect: E, value 1
|
1064
|
[ 6.329909] c0 id 75, value 0
|
1065
|
[ 6.329931] c0 m5mo_set_iso: E, value 0
|
1066
|
[ 6.336109] c0 m5mo_set_mode: 0x1 -> 0x2
|
1067
|
[ 6.381058] c0 m5mo_power down
|
1068
|
[ 6.381083] c0 m5mo_power_down: in
|
1069
|
[ 6.394496] c0 s3c_csis_power: in
|
1070
|
[ 6.394519] c0 s3c_csis_power: out
|
1071
|
[ 6.400890] c0 s3c-fimc0: fimc_runtime_suspend_cap: No capture device.
|
1072
|
[ 6.414431] c0 s3c-fimc0: FIMC0 0 released.
|
1073
|
[ 6.414699] c0 s3c-fimc2: FIMC2 0 released.
|
1074
|
[ 6.416340] c0 s3c-fimc0: FIMC0 1 opened.
|
1075
|
[ 6.416390] c0 fimc_s_input: index 1 FIMC0
|
1076
|
[ 6.416412] c0
|
1077
|
[ 6.416423] c0
|
1078
|
[ 6.416433] c0 fimc_s_input activating subdev
|
1079
|
[ 6.431661] c0 [S5K5BAFX] Default preview_width: 640 , preview_height: 480, capture_width: 1600, capture_height: 1200
|
1080
|
[ 6.431724] c0 S5K5BAFX 12-002d: driver probed!!
|
1081
|
[ 6.431765] c0 fimc_s_input activated subdev = 1
|
1082
|
[ 6.432209] c0 fimc_s_input--: index 1 FIMC0
|
1083
|
[ 6.432281] c0 s3c-fimc2: FIMC2 1 opened.
|
1084
|
[ 6.432334] c0 fimc_s_input: index 1 FIMC2
|
1085
|
[ 6.432386] c0 fimc_s_input--: index 1 FIMC2
|
1086
|
[ 6.432428] c0 fimc_g_ext_ctrls_capture++
|
1087
|
[ 6.432453] c0 fimc_g_ext_ctrls_capture--
|
1088
|
[ 6.432936] c0 [S5K5BAFX] s_ctrl: id = 37, value=90
|
1089
|
[ 6.432971] c0 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
|
1090
|
[ 6.433123] c0 [S5K5BAFX] s_ctrl: id = 99, value=7
|
1091
|
[ 6.433149] c0 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
|
1092
|
[ 6.433250] c0 [S5K5BAFX] s_ctrl: id = 72, value=0
|
1093
|
[ 6.433274] c0 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
|
1094
|
[ 6.433344] c0 [S5K5BAFX] s_ctrl: id = 70, value=1
|
1095
|
[ 6.433369] c0 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
|
1096
|
[ 6.433445] c0 [S5K5BAFX] s_ctrl: id = 75, value=0
|
1097
|
[ 6.433469] c0 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
|
1098
|
[ 6.435597] c0 [S5K5BAFX] s_ctrl: id = 71, value=1
|
1099
|
[ 6.435625] c0 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
|
1100
|
[ 6.436253] c0 S5K5BAFX 12-002d: driver removed!!
|
1101
|
[ 6.450223] c0 s5k5bafx_power(): down
|
1102
|
[ 6.450899] c0 s3c_csis_power: in
|
1103
|
[ 6.450919] c0 s3c_csis_power: out
|
1104
|
[ 6.450947] c0 s3c-fimc0: fimc_runtime_suspend_cap: No capture device.
|
1105
|
[ 6.456393] c0 s3c-fimc0: FIMC0 0 released.
|
1106
|
[ 6.456858] c0 s3c-fimc2: FIMC2 0 released.
|
1107
|
[ 7.102970] c1 hub 1-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
|
1108
|
[ 7.109773] c0 usb 1-2: USB disconnect, device number 2 by hub_thread+0xf08/0x119c
|
1109
|
[ 7.109917] c0 mif: if_usb_disconnect:
|
1110
|
[ 7.110274] c0 mif: if_usb_disconnect: put dev 0xe2b2d800
|
1111
|
[ 7.110756] c0 mif: if_usb_disconnect:
|
1112
|
[ 7.126638] c0 mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0
|
1113
|
[ 7.126677] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 3)
|
1114
|
[ 7.133920] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 3)
|
1115
|
[ 7.142698] c0 mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0
|
1116
|
[ 7.142732] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 3)
|
1117
|
[ 7.151366] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 3)
|
1118
|
[ 7.331591] c0 mif: link_pm_ioctl: 6f32
|
1119
|
[ 7.360092] c0 usb 1-2: new high speed USB device number 3 using s5p-ehci
|
1120
|
[ 7.381824] c0 mif: link_pm_ioctl: 6f32
|
1121
|
[ 7.426434] c0 s5p-ehci s5p-ehci: port 2 reset error -110
|
1122
|
[ 7.431945] c0 mif: link_pm_ioctl: 6f32
|
1123
|
[ 7.482067] c0 mif: link_pm_ioctl: 6f32
|
1124
|
[ 7.532227] c0 mif: link_pm_ioctl: 6f32
|
1125
|
[ 7.582387] c0 mif: link_pm_ioctl: 6f32
|
1126
|
[ 7.632559] c0 mif: link_pm_ioctl: 6f32
|
1127
|
[ 7.682800] c0 mif: link_pm_ioctl: 6f32
|
1128
|
[ 7.733210] c0 mif: link_pm_ioctl: 6f32
|
1129
|
[ 7.785439] c0 mif: link_pm_ioctl: 6f32
|
1130
|
[ 7.836164] c0 mif: link_pm_ioctl: 6f30
|
1131
|
[ 7.836299] c0 store_ehci_power: EHCI turns off
|
1132
|
[ 7.836327] c0 s5p-ehci s5p-ehci: remove, state 1
|
1133
|
[ 7.836383] c0 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xb0/0x150
|
1134
|
[ 7.900078] c0 hub 1-0:1.0: hub_port_status failed (err = -19)
|
1135
|
[ 7.906588] c0 hub 1-0:1.0: cannot disable port 2 (err = -19)
|
1136
|
[ 7.915546] c0 hub 1-0:1.0: cannot reset port 2 (err = -19)
|
1137
|
[ 7.925981] c0 hub 1-0:1.0: cannot disable port 2 (err = -19)
|
1138
|
[ 7.943793] c0 hub 1-0:1.0: cannot reset port 2 (err = -19)
|
1139
|
[ 7.948455] c0 hub 1-0:1.0: cannot disable port 2 (err = -19)
|
1140
|
[ 7.954861] c0 hub 1-0:1.0: cannot reset port 2 (err = -19)
|
1141
|
[ 7.960352] c0 hub 1-0:1.0: cannot disable port 2 (err = -19)
|
1142
|
[ 7.966432] c0 hub 1-0:1.0: unable to enumerate USB device on port 2
|
1143
|
[ 7.980126] c1 hub 1-0:1.0: cannot disable port 2 (err = -19)
|
1144
|
[ 8.031737] c0 s5p-ehci s5p-ehci: USB bus 1 deregistered
|
1145
|
[ 8.033430] c0 [MODEM_IF]Active States =0, s5p-ehci
|
1146
|
[ 8.087112] c0 mif: link_pm_ioctl: 6f31
|
1147
|
[ 8.087146] c0 mif: link_pm_ioctl: 6f32
|
1148
|
[ 8.087257] c0 mif: link_pm_ioctl: 6f30
|
1149
|
[ 8.087362] c0 store_ehci_power: EHCI turns on
|
1150
|
[ 8.087408] c0 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x154/0x5bc):
|
1151
|
[ 8.087448] c0 mif: set hsic lpa phy init: slave wake-up (1)
|
1152
|
[ 8.087478] c0 s5p-ehci s5p-ehci: usb phy usage(2)
|
1153
|
[ 8.087652] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
|
1154
|
[ 8.089540] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
|
1155
|
[ 8.089673] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
|
1156
|
[ 8.100096] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
|
1157
|
[ 8.100188] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
|
1158
|
[ 8.100222] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
1159
|
[ 8.100256] c0 usb usb1: Product: S5P EHCI Host Controller
|
1160
|
[ 8.100282] c0 usb usb1: Manufacturer: Linux 3.0.101-replicant ehci_hcd
|
1161
|
[ 8.100312] c0 usb usb1: SerialNumber: s5p-ehci
|
1162
|
[ 8.106621] c0 hub 1-0:1.0: USB hub found
|
1163
|
[ 8.106668] c0 hub 1-0:1.0: 3 ports detected
|
1164
|
[ 8.107352] c0 [MODEM_IF]Active States =1, s5p-ehci
|
1165
|
[ 8.161012] c0 mif: link_pm_ioctl: 6f31
|
1166
|
[ 8.161040] c0 mif: link_pm_ioctl: 6f33
|
1167
|
[ 8.211162] c0 mif: link_pm_ioctl: 6f33
|
1168
|
[ 8.261298] c0 mif: link_pm_ioctl: 6f33
|
1169
|
[ 8.311426] c0 mif: link_pm_ioctl: 6f33
|
1170
|
[ 8.361556] c0 mif: link_pm_ioctl: 6f33
|
1171
|
[ 8.411673] c0 mif: link_pm_ioctl: 6f33
|
1172
|
[ 8.420163] c1 usb 1-2: new high speed USB device number 2 using s5p-ehci
|
1173
|
[ 8.461822] c0 mif: link_pm_ioctl: 6f33
|
1174
|
[ 8.511988] c0 mif: link_pm_ioctl: 6f33
|
1175
|
[ 8.558745] c0 usb 1-2: New USB device found, idVendor=1519, idProduct=0020
|
1176
|
[ 8.558796] c0 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
|
1177
|
[ 8.558843] c0 usb 1-2: Product: HSIC Device
|
1178
|
[ 8.558872] c0 usb 1-2: Manufacturer: Comneon
|
1179
|
[ 8.558901] c0 usb 1-2: SerialNumber: 0123456789
|
1180
|
[ 8.562130] c0 mif: link_pm_ioctl: 6f33
|
1181
|
[ 8.583536] c0 mif: if_usb_probe: usbdev = 0xe2b2fc00
|
1182
|
[ 8.583577] c0 mif: if_usb_set_pipe: set 0
|
1183
|
[ 8.583606] c0 mif: if_usb_probe: devdata usbdev = 0xe2b2fc00
|
1184
|
[ 8.583699] c0 mif: if_usb_probe: successfully done
|
1185
|
[ 8.595168] c1 mif: if_usb_probe: usbdev = 0xe2b2fc00
|
1186
|
[ 8.595209] c1 mif: if_usb_set_pipe: set 1
|
1187
|
[ 8.595239] c1 mif: if_usb_probe: devdata usbdev = 0xe2b2fc00
|
1188
|
[ 8.595320] c1 mif: if_usb_probe: successfully done
|
1189
|
[ 8.607886] c1 mif: if_usb_probe: usbdev = 0xe2b2fc00
|
1190
|
[ 8.607927] c1 mif: if_usb_set_pipe: set 2
|
1191
|
[ 8.607955] c1 mif: if_usb_probe: devdata usbdev = 0xe2b2fc00
|
1192
|
[ 8.608043] c1 mif: if_usb_probe: successfully done
|
1193
|
[ 8.612300] c0 mif: link_pm_ioctl: 6f33
|
1194
|
[ 8.624383] c0 mif: if_usb_probe: usbdev = 0xe2b2fc00
|
1195
|
[ 8.624418] c0 mif: if_usb_set_pipe: set 3
|
1196
|
[ 8.624443] c0 mif: if_usb_probe: devdata usbdev = 0xe2b2fc00
|
1197
|
[ 8.624527] c0 mif: link_pm_change_modem_state: set modem state 4 by if_usb_probe+0x46c/0x4b4
|
1198
|
[ 8.632383] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 4)
|
1199
|
[ 8.640750] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 4)
|
1200
|
[ 8.649924] c0 mif: if_usb_probe: successfully done
|
1201
|
[ 8.662455] c0 mif: link_pm_ioctl: 6f33
|
1202
|
[ 8.971467] c0 mif: misc_release: iod = umts_boot0
|
1203
|
[ 8.974853] c0 mif: misc_open: iod = umts_ipc0
|
1204
|
[ 8.980975] c0 mif: usb_init_communication: 1942:rild
|
1205
|
[ 8.981005] c0 mif: start_ipc: send 'a'
|
1206
|
[ 8.983637] c0 mif: misc_open: iod = umts_rfs0
|
1207
|
[ 8.986052] c1 mif: IPC-RX(129): 7f 0a 00 00 07 00 ff ff 01 01 03 7e 7f 1a 00 00 ...
|
1208
|
[ 8.989760] c0 mif: usb_init_communication: 1942:rild
|
1209
|
[ 9.080077] c0 mif: link_pm_runtime_start: rpm_status: 0
|
1210
|
[ 9.080110] c0 mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
|
1211
|
[ 9.187360] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
|
1212
|
[ 9.187408] c0 mif: link_pm_runtime_work: rpm_states=3
|
1213
|
[ 9.230792] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
|
1214
|
[ 9.285094] c0 mif: usb_port_resume: 1283, 4
|
1215
|
[ 9.492241] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
|
1216
|
[ 9.492293] c0 mif: link_pm_runtime_work: rpm_states=3
|
1217
|
[ 9.535700] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
|
1218
|
[ 9.585101] c0 mif: usb_port_resume: 1283, 4
|
1219
|
[ 9.797509] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
|
1220
|
[ 9.797588] c0 mif: link_pm_runtime_work: rpm_states=3
|
1221
|
[ 9.840681] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
|
1222
|
[ 9.890084] c0 mif: usb_port_resume: 1283, 4
|
1223
|
[ 10.047456] c0 warning: `main' uses 32-bit capabilities (legacy support in use)
|
1224
|
[ 10.097231] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
|
1225
|
[ 10.097298] c0 mif: link_pm_runtime_work: rpm_states=3
|
1226
|
[ 10.140751] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
|
1227
|
[ 10.190056] c0 mif: usb_port_resume: 1283, 4
|
1228
|
[ 10.397225] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
|
1229
|
[ 10.397276] c0 mif: link_pm_runtime_work: rpm_states=3
|
1230
|
[ 10.441046] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
|
1231
|
[ 10.490099] c0 mif: usb_port_resume: 1283, 4
|
1232
|
[ 10.697475] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
|
1233
|
[ 10.697541] c0 mif: link_pm_runtime_work: rpm_states=3
|
1234
|
[ 10.740682] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
|
1235
|
[ 10.790134] c0 mif: usb_port_resume: 1283, 4
|
1236
|
[ 10.902482] c1 max17042 9-0036: max17042_get_soc : soc(0de9)
|
1237
|
[ 10.902513] c1 max17042_need_soc_recal: HW(0xe)
|
1238
|
[ 10.902537] c1 max17042 9-0036: max17042_get_soc : use raw (13), soc (13)
|
1239
|
[ 10.997995] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
|
1240
|
[ 10.998124] c0 mif: link_pm_runtime_work: rpm_states=3
|
1241
|
[ 11.040725] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
|
1242
|
[ 11.090098] c0 mif: usb_port_resume: 1283, 4
|
1243
|
[ 11.298075] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
|
1244
|
[ 11.298332] c0 mif: link_pm_runtime_work: rpm_states=3
|
1245
|
[ 11.340894] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
|
1246
|
[ 11.390200] c0 mif: usb_port_resume: 1283, 4
|
1247
|
[ 11.501446] c0 mc1n2 6-003a: write 0 = 4b
|
1248
|
[ 11.503001] c0 mc1n2 6-003a: write 0 = 4b4b
|
1249
|
[ 11.503900] c0 mc1n2 6-003a: write 0 = 4bcb
|
1250
|
[ 11.504653] c0 mc1n2 6-003a: write 0 = cbcb
|
1251
|
[ 11.505584] c0 mc1n2 6-003a: write 1 = 4b
|
1252
|
[ 11.506368] c0 mc1n2 6-003a: write 1 = 4b4b
|
1253
|
[ 11.507213] c0 mc1n2 6-003a: write 1 = 4bcb
|
1254
|
[ 11.507966] c0 mc1n2 6-003a: write 1 = cbcb
|
1255
|
[ 11.508801] c0 mc1n2 6-003a: write 3 = 4b
|
1256
|
[ 11.509552] c0 mc1n2 6-003a: write 3 = 4b4b
|
1257
|
[ 11.510428] c0 mc1n2 6-003a: write 3 = 4bcb
|
1258
|
[ 11.511179] c0 mc1n2 6-003a: write 3 = cbcb
|
1259
|
[ 11.512084] c0 mc1n2 6-003a: write 4 = 4b
|
1260
|
[ 11.512975] c0 mc1n2 6-003a: write 4 = 4b4b
|
1261
|
[ 11.513924] c0 mc1n2 6-003a: write 4 = 4bcb
|
1262
|
[ 11.514738] c0 mc1n2 6-003a: write 4 = cbcb
|
1263
|
[ 11.515697] c0 mc1n2 6-003a: write 5 = 4b
|
1264
|
[ 11.516498] c0 mc1n2 6-003a: write 5 = 4b4b
|
1265
|
[ 11.518281] c0 mc1n2 6-003a: write 5 = 4bcb
|
1266
|
[ 11.518991] c0 mc1n2 6-003a: write 5 = cbcb
|
1267
|
[ 11.519829] c0 mc1n2 6-003a: write 7 = 4b
|
1268
|
[ 11.520325] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
|
1269
|
[ 11.520657] c0 mc1n2 6-003a: write 7 = 4b4b
|
1270
|
[ 11.521562] c0 mc1n2 6-003a: write 7 = 4bcb
|
1271
|
[ 11.523247] c0 mc1n2 6-003a: write 7 = cbcb
|
1272
|
[ 11.524138] c0 mc1n2 6-003a: write 8 = 4b
|
1273
|
[ 11.524927] c0 mc1n2 6-003a: write 8 = 4b4b
|
1274
|
[ 11.525892] c0 mc1n2 6-003a: write 8 = 4bcb
|
1275
|
[ 11.526669] c0 mc1n2 6-003a: write 8 = cbcb
|
1276
|
[ 11.527486] c0 mc1n2 6-003a: write 9 = 4b
|
1277
|
[ 11.528225] c0 mc1n2 6-003a: write 9 = 4b4b
|
1278
|
[ 11.529149] c0 mc1n2 6-003a: write 9 = 4bcb
|
1279
|
[ 11.529924] c0 mc1n2 6-003a: write 9 = cbcb
|
1280
|
[ 11.530886] c0 mc1n2 6-003a: write b = 4b
|
1281
|
[ 11.531671] c0 mc1n2 6-003a: write b = 4b4b
|
1282
|
[ 11.533596] c0 mc1n2 6-003a: write b = 4bcb
|
1283
|
[ 11.534423] c0 mc1n2 6-003a: write b = cbcb
|
1284
|
[ 11.535340] c0 mc1n2 6-003a: write d = 4b
|
1285
|
[ 11.536024] c0 mc1n2 6-003a: write d = 4b4b
|
1286
|
[ 11.537716] c0 mc1n2 6-003a: write d = 4bcb
|
1287
|
[ 11.539226] c0 mc1n2 6-003a: write d = cbcb
|
1288
|
[ 11.540241] c0 mc1n2 6-003a: write e = 4b
|
1289
|
[ 11.541134] c0 mc1n2 6-003a: write e = 4b4b
|
1290
|
[ 11.542659] c0 mc1n2 6-003a: write e = 4bcb
|
1291
|
[ 11.543516] c0 mc1n2 6-003a: write e = cbcb
|
1292
|
[ 11.544447] c0 mc1n2 6-003a: write f = 4b
|
1293
|
[ 11.545449] c0 mc1n2 6-003a: write f = 4b4b
|
1294
|
[ 11.546454] c0 mc1n2 6-003a: write f = 4bcb
|
1295
|
[ 11.547261] c0 mc1n2 6-003a: write f = cbcb
|
1296
|
[ 11.548144] c0 mc1n2 6-003a: write 10 = 4b
|
1297
|
[ 11.548969] c0 mc1n2 6-003a: write 10 = 4b4b
|
1298
|
[ 11.549884] c0 mc1n2 6-003a: write 10 = 4bcb
|
1299
|
[ 11.550732] c0 mc1n2 6-003a: write 10 = cbcb
|
1300
|
[ 11.551643] c0 mc1n2 6-003a: write 11 = 13
|
1301
|
[ 11.552852] c0 mc1n2 6-003a: write 11 = 1313
|
1302
|
[ 11.554134] c0 mc1n2 6-003a: write 11 = 1393
|
1303
|
[ 11.555152] c0 mc1n2 6-003a: write 11 = 9393
|
1304
|
[ 11.558001] c0 mc1n2 6-003a: write 17 = 1a
|
1305
|
[ 11.559013] c0 mc1n2 6-003a: write 17 = 1a1a
|
1306
|
[ 11.559944] c0 mc1n2 6-003a: write 17 = 1a9a
|
1307
|
[ 11.560762] c0 mc1n2 6-003a: write 17 = 9a9a
|
1308
|
[ 11.561803] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
|
1309
|
[ 11.561894] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
|
1310
|
[ 11.578458] c0 G:P:DmaAddr=@64640000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
|
1311
|
[ 11.578883] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
|
1312
|
[ 11.578977] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
|
1313
|
[ 11.611820] c1 request_suspend_state: wakeup (3->0) at 11611776258 (2017-08-30 21:00:00.666477589 UTC)
|
1314
|
[ 11.647043] c0 mc1n2 6-003a: write 11 = 939a
|
1315
|
[ 11.648246] c0 mc1n2 6-003a: write 11 = 9a9a
|
1316
|
[ 11.650255] c1 mc1n2 6-003a: write 1b = 2
|
1317
|
[ 11.651086] c1 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
|
1318
|
[ 11.651133] c1 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
|
1319
|
[ 11.664528] c0 G:C:DmaAddr=@64660000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffda0000
|
1320
|
[ 11.665329] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
|
1321
|
[ 11.665376] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
|
1322
|
[ 11.667550] c0 mc1n2 6-003a: write 11 = 9a93
|
1323
|
[ 11.668267] c0 mc1n2 6-003a: write 11 = 9393
|
1324
|
[ 11.668478] c0 lcd panel: id=0 brightness=102, bl=4, candela=100
|
1325
|
[ 11.670240] c0 mc1n2 6-003a: write 1b = 0
|
1326
|
[ 11.705740] c0 s5p-ehci s5p-ehci: host_phy_susp
|
1327
|
[ 15.600095] c0 usb: usb_ready udc_enable=0
|
1328
|
[ 17.560105] c0 max8997-muic max8997-muic: max8997_muic_usb_detect
|
1329
|
[ 17.560163] c0 max8997-muic max8997-muic: max8997_muic_usb_detect: usb attach
|
1330
|
[ 17.560216] c0 otg max8997_muic_usb_cb: usb mode=1
|
1331
|
[ 17.560252] c0 otg change mode : USB Cable Detached --> USB Cable Attached (0 --> 1) disabled
|
1332
|
[ 17.560311] c0 usb: s3c_vbus_enable, ready u_e: 0, is_active: 1
|
1333
|
[ 17.560352] c0 usb: s3c_vbus_enable is_active=1(udc_enable),softconnect=1
|
1334
|
[ 17.560513] c0 usb: s5p_usb_phy0_tune read original tune
|
1335
|
[ 17.560552] c0 usb: s5p_usb_phy0_tune save default phytune (0x819b3)
|
1336
|
[ 17.560596] c0 usb: s5p_usb_phy0_tune original tune=0x819b3
|
1337
|
[ 17.560635] c0 usb: s5p_usb_phy0_tune tune_mask=0x10380f, tune=0x10280b
|
1338
|
[ 17.560690] c0 usb: s5p_usb_phy0_tune custom tune=0x1829bb
|
1339
|
[ 17.560727] c0 usb: s5p_usb_phy0_tune modified tune=0x1829bb
|
1340
|
[ 17.800310] c0 usb: GET_DES
|
1341
|
[ 17.800371] c0 usb: android_work config= (null),connected=1,sw_connected=0
|
1342
|
[ 17.801021] c0 usb: android_work sent uevent USB_STATE=CONNECTED
|
1343
|
[ 17.932275] c0 usb: GET_DES
|
1344
|
[ 17.933569] c0 android_usb gadget: high speed config #1: android
|
1345
|
[ 17.933635] c0 usb: SET_CON
|
1346
|
[ 17.933734] c0 usb: android_work config=c1087e7c,connected=1,sw_connected=1
|
1347
|
[ 17.934570] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
|
1348
|
[ 18.110332] c0 k3dh_open: is called.
|
1349
|
[ 18.114138] c1 healthd: fuelgauge: Unknown power supply type
|
1350
|
[ 18.115231] c1 healthd: battery [l=13 v=3766 t=33.0 h=2 st=2] c=0 chg= 2017-08-30 21:00:07.169846050 UTC
|
1351
|
[ 18.119737] c1 input: acceleration as /devices/virtual/input/input8
|
1352
|
[ 18.153575] c0 input: magnetic as /devices/virtual/input/input9
|
1353
|
[ 18.825292] c0 [TSP] sec_touchscreen_enable
|
1354
|
[ 18.828523] c0 [TSP] Calibration!!!!!!
|
1355
|
[ 18.829019] c1 lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
|
1356
|
[ 18.829071] c1 lowmemorykiller: oom_adj 0 => oom_score_adj 0
|
1357
|
[ 18.829109] c1 lowmemorykiller: oom_adj 1 => oom_score_adj 58
|
1358
|
[ 18.829148] c1 lowmemorykiller: oom_adj 2 => oom_score_adj 117
|
1359
|
[ 18.829187] c1 lowmemorykiller: oom_adj 3 => oom_score_adj 176
|
1360
|
[ 18.829226] c1 lowmemorykiller: oom_adj 9 => oom_score_adj 529
|
1361
|
[ 18.829265] c1 lowmemorykiller: oom_adj 15 => oom_score_adj 1000
|
1362
|
[ 18.830934] c1 init: write_file: Unable to open '/proc/sys/vm/extra_free_kbytes': No such file or directory
|
1363
|
[ 18.832412] c0 [TSP] Calibration End!!!!!!
|
1364
|
[ 18.835730] c0 [TSP] +mxt224_optical_gain()
|
1365
|
[ 19.176976] c0 [TSP] -mxt224_optical_gain()
|
1366
|
[ 19.916035] c1 [TouchKey] BLN_ongoing set to false
|
1367
|
[ 19.916064] c1 [TouchKey] disable LED from BLN app
|
1368
|
[ 20.015967] c1 usb: state_show buf=CONFIGURED
|
1369
|
[ 20.016816] c1 acc_open
|
1370
|
[ 20.016841] c1 acc_release
|
1371
|
[ 20.328092] c1 [VIB] vibrator_work: pwm_config duty=28230
|
1372
|
[ 20.350165] c1 [VIB] vibrator_work: pwm_config duty=28230
|
1373
|
[ 20.407831] c1 type=1400 audit(1504126809.455:5): avc: denied { read } for pid=2291 comm="system_server" name="mode" dev=sysfs ino=5934 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_display:s0 tclass=file permissive=0
|
1374
|
[ 20.408493] c1 type=1400 audit(1504126809.455:6): avc: denied { write } for pid=2291 comm="system_server" name="mode" dev=sysfs ino=5934 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_display:s0 tclass=file permissive=0
|
1375
|
[ 20.413063] c1 type=1400 audit(1504126809.460:7): avc: denied { write } for pid=2291 comm="system_server" name="mode" dev=sysfs ino=5934 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_display:s0 tclass=file permissive=0
|
1376
|
[ 20.922555] c1 max17042 9-0036: max17042_get_soc : soc(0de9)
|
1377
|
[ 20.922593] c1 max17042_need_soc_recal: HW(0xe)
|
1378
|
[ 20.922622] c1 max17042 9-0036: max17042_get_soc : use raw (13), soc (13)
|
1379
|
[ 20.961934] c0 [TouchKey] system calling LED Notification control
|
1380
|
[ 21.406134] c1 type=1400 audit(1504126810.435:8): avc: denied { write } for pid=2433 comm="od.themeservice" name="theme" dev=mmcblk0p10 ino=16417 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:themeservice_app_data_file:s0 tclass=dir permissive=0
|
1381
|
[ 21.406867] c1 type=1400 audit(1504126810.435:9): avc: denied { write } for pid=2433 comm="od.themeservice" name="theme" dev=mmcblk0p10 ino=16417 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:themeservice_app_data_file:s0 tclass=dir permissive=0
|
1382
|
[ 21.407118] c1 type=1400 audit(1504126810.440:10): avc: denied { write } for pid=2433 comm="od.themeservice" name="theme" dev=mmcblk0p10 ino=16417 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:themeservice_app_data_file:s0 tclass=dir permissive=0
|
1383
|
[ 21.407331] c1 type=1400 audit(1504126810.445:11): avc: denied { write } for pid=2433 comm="od.themeservice" name="theme" dev=mmcblk0p10 ino=16417 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:themeservice_app_data_file:s0 tclass=dir permissive=0
|
1384
|
[ 21.407533] c1 type=1400 audit(1504126810.445:12): avc: denied { write } for pid=2433 comm="od.themeservice" name="theme" dev=mmcblk0p10 ino=16417 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:themeservice_app_data_file:s0 tclass=dir permissive=0
|
1385
|
[ 21.540503] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
|
1386
|
[ 21.610241] c1 type=1400 audit(1504126810.650:13): avc: denied { getattr } for pid=2471 comm="d.process.media" path="/storage/0A0C-13E0" dev=tmpfs ino=4789 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
|
1387
|
[ 21.632448] c0 type=1400 audit(1504126810.660:14): avc: denied { getattr } for pid=2471 comm="d.process.media" path="/storage/0A0C-13E0" dev=tmpfs ino=4789 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
|
1388
|
[ 21.632707] c0 type=1400 audit(1504126810.660:15): avc: denied { getattr } for pid=2471 comm="d.process.media" path="/storage/0A0C-13E0" dev=tmpfs ino=4789 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
|
1389
|
[ 21.719193] c1 mtp_open
|
1390
|
[ 21.736797] c0 type=1400 audit(1504126810.745:16): avc: denied { getattr } for pid=2471 comm="d.process.media" path="/storage/0A0C-13E0" dev=tmpfs ino=4789 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
|
1391
|
[ 21.737064] c0 type=1400 audit(1504126810.745:17): avc: denied { getattr } for pid=2471 comm="d.process.media" path="/storage/0A0C-13E0" dev=tmpfs ino=4789 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
|
1392
|
[ 21.737530] c0 type=1400 audit(1504126810.755:18): avc: denied { getattr } for pid=2471 comm="d.process.media" path="/storage/0A0C-13E0" dev=tmpfs ino=4789 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
|
1393
|
[ 21.737764] c0 type=1400 audit(1504126810.755:19): avc: denied { getattr } for pid=2471 comm="d.process.media" path="/storage/0A0C-13E0" dev=tmpfs ino=4789 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:storage_stub_file:s0 tclass=dir permissive=0
|
1394
|
[ 21.881355] c0 SELinux: initialized (dev mmcblk0p11, type vfat), uses genfs_contexts
|
1395
|
[ 21.918024] c1 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
|
1396
|
[ 21.921289] c1 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
|
1397
|
[ 21.922666] c1 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
|
1398
|
[ 24.172231] c0 binder: 2291:2299 refcount change on invalid ref 112
|
1399
|
[ 24.532155] c0 mif: link_pm_slave_wake: gpio [SWK] set [1]
|
1400
|
[ 24.541357] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
|
1401
|
[ 24.544113] c0 s5p-ehci s5p-ehci: host_phy_resume
|
1402
|
[ 24.578557] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
|
1403
|
[ 24.622167] c0 mif: usb_port_resume: 1283, 4
|
1404
|
[ 24.623259] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 01 ff 01 07 01 01 00 7e
|
1405
|
[ 24.625068] c1 mif: IPC-RX(30): 7f 0f 00 00 0c 00 ff 01 80 01 02 01 07 01 00 80 ...
|
1406
|
[ 24.935261] c1 s5p-ehci s5p-ehci: host_phy_susp
|
1407
|
[ 25.605106] c0 max8997-muic max8997-muic: max8997_muic_mhl_detect
|
1408
|
[ 26.059609] c0 k3dh_ioctl: opened = 0, enable = 1
|
1409
|
[ 26.062394] c0 k3dh_set_delay: old=2500000ns, new=40000000ns, odr=0x30/0x77
|
1410
|
[ 26.062664] c0 k3dh_set_delay: old=40000000ns, new=40000000ns, odr=0x30/0x37
|
1411
|
[ 26.086005] c1 mif: link_pm_slave_wake: gpio [SWK] set [1]
|
1412
|
[ 26.096242] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
|
1413
|
[ 26.113977] c1 s5p-ehci s5p-ehci: host_phy_resume
|
1414
|
[ 26.150856] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
|
1415
|
[ 26.195116] c1 mif: usb_port_resume: 1283, 4
|
1416
|
[ 26.196020] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 02 ff 01 07 01 02 02 7e
|
1417
|
[ 26.207691] c1 mif: IPC-RX(188): 7f 0f 00 00 0c 00 ff 02 80 01 02 01 07 01 00 80 ...
|
1418
|
[ 26.212488] c1 mif: IPC-TX(13): 7f 0b 00 00 08 00 03 ff 07 01 02 01 7e
|
1419
|
[ 26.212557] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 04 ff 08 03 02 7e
|
1420
|
[ 26.212945] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 05 ff 08 02 02 7e
|
1421
|
[ 26.213680] c1 mif: IPC-RX(16): 7f 0e 00 00 0b 00 ff 03 07 01 02 01 00 00 04 7e
|
1422
|
[ 26.214422] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 04 08 03 02 02 04 ff 32 32 ...
|
1423
|
[ 26.214784] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 05 08 02 02 02 7e
|
1424
|
[ 26.321886] c0 mif: misc_write: write rfs size = 15
|
1425
|
[ 26.324966] c0 mif: IPC-TX(13): 7f 0b 00 00 08 00 06 ff 0a 01 02 ff 7e
|
1426
|
[ 26.325091] c0 mif: IPC-TX(13): 7f 0b 00 00 08 00 07 ff 0a 03 02 01 7e
|
1427
|
[ 26.327339] c1 mif: IPC-RX(160): 7f 9e 00 00 9b 00 00 06 0a 01 02 1f 49 39 31 30 ...
|
1428
|
[ 26.329188] c1 mif: IPC-RX(46): 7f 2c 00 00 29 00 00 07 0a 03 02 01 11 33 35 38 ...
|
1429
|
[ 26.345758] c0 s3c-fimc0: FIMC0 1 opened.
|
1430
|
[ 26.345805] c0 fimc_s_input: index 0 FIMC0
|
1431
|
[ 26.345826] c0
|
1432
|
[ 26.345835] c0
|
1433
|
[ 26.345844] c0 fimc_s_input activating subdev
|
1434
|
[ 26.354149] c1 m5mo_probe
|
1435
|
[ 26.354203] c1 fimc_s_input activated subdev = 0
|
1436
|
[ 26.354647] c1 m5mo_power on
|
1437
|
[ 26.354670] c1 m5mo_power_on: in. hw=0xE
|
1438
|
[ 26.378500] c1 m5mo_power_on: out
|
1439
|
[ 26.378524] c1 s3c_csis_power: in
|
1440
|
[ 26.379497] c1 s3c_csis_power: out
|
1441
|
[ 26.428042] c0 mif: misc_write: write rfs size = 15
|
1442
|
[ 26.490965] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 08 ff 08 02 02 7e
|
1443
|
[ 26.492661] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 08 08 02 02 02 7e
|
1444
|
[ 26.493776] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 09 ff 02 06 02 7e
|
1445
|
[ 26.495304] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 09 02 06 02 00 7e
|
1446
|
[ 26.512401] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 0a ff 05 01 02 7e
|
1447
|
[ 26.514286] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 0b ff 08 03 02 7e
|
1448
|
[ 26.514321] c1 mif: IPC-RX(14): 7f 0c 00 00 09 00 00 0a 05 01 02 80 00 7e
|
1449
|
[ 26.514895] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 0c ff 05 01 02 7e
|
1450
|
[ 26.515385] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 0d ff 08 05 02 ff 03 7e
|
1451
|
[ 26.516029] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 0b 08 03 02 02 04 ff 32 32 ...
|
1452
|
[ 26.516437] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 0e ff 08 05 02 ff 02 7e
|
1453
|
[ 26.516822] c1 mif: IPC-RX(14): 7f 0c 00 00 09 00 00 0c 05 01 02 80 00 7e
|
1454
|
[ 26.517421] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 0f ff 08 02 02 7e
|
1455
|
[ 26.518787] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 0d 08 05 02 ff 03 01 00 00 ...
|
1456
|
[ 26.519533] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 0e 08 05 02 ff 02 04 00 00 ...
|
1457
|
[ 26.520956] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 0f 08 02 02 02 7e
|
1458
|
[ 26.522960] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 10 ff 08 03 02 7e
|
1459
|
[ 26.523987] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 11 ff 08 05 02 ff 03 7e
|
1460
|
[ 26.524445] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 10 08 03 02 02 04 ff 32 32 ...
|
1461
|
[ 26.525153] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 11 08 05 02 ff 03 01 00 00 ...
|
1462
|
[ 26.530069] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 12 ff 08 05 02 ff 02 7e
|
1463
|
[ 26.531696] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 12 08 05 02 ff 02 04 00 00 ...
|
1464
|
[ 26.534725] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 13 ff 08 02 02 7e
|
1465
|
[ 26.536728] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 13 08 02 02 02 7e
|
1466
|
[ 26.540111] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 14 ff 08 03 02 7e
|
1467
|
[ 26.541301] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 15 ff 08 05 02 ff 03 7e
|
1468
|
[ 26.541916] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 14 08 03 02 02 04 ff 32 32 ...
|
1469
|
[ 26.543022] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 16 ff 08 05 02 ff 02 7e
|
1470
|
[ 26.543177] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 15 08 05 02 ff 03 01 00 00 ...
|
1471
|
[ 26.543784] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 17 ff 08 02 02 7e
|
1472
|
[ 26.544737] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 18 ff 08 03 02 7e
|
1473
|
[ 26.544902] c1 mif: IPC-RX(36): 7f 15 00 00 12 00 00 16 08 05 02 ff 02 04 00 00 ...
|
1474
|
[ 26.546319] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 19 ff 08 05 02 ff 03 7e
|
1475
|
[ 26.547170] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 18 08 03 02 02 04 ff 32 32 ...
|
1476
|
[ 26.547354] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 1a ff 08 05 02 ff 02 7e
|
1477
|
[ 26.548450] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 19 08 05 02 ff 03 01 00 00 ...
|
1478
|
[ 26.549554] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 1a 08 05 02 ff 02 04 00 00 ...
|
1479
|
[ 26.553840] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 1b ff 08 02 02 7e
|
1480
|
[ 26.554813] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 1b 08 02 02 02 7e
|
1481
|
[ 26.575940] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 1c ff 08 03 02 7e
|
1482
|
[ 26.577357] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 1d ff 08 05 02 ff 03 7e
|
1483
|
[ 26.578568] c1 mif: IPC-RX(46): 7f 15 00 00 12 00 00 1c 08 03 02 02 04 ff 32 32 ...
|
1484
|
[ 26.582377] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 1e ff 08 05 02 ff 02 7e
|
1485
|
[ 26.582438] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 1f ff 08 02 02 7e
|
1486
|
[ 26.583805] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 1e 08 05 02 ff 02 04 00 00 ...
|
1487
|
[ 26.585082] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 1f 08 02 02 02 7e
|
1488
|
[ 26.592207] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 20 ff 08 03 02 7e
|
1489
|
[ 26.593803] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 20 08 03 02 02 04 ff 32 32 ...
|
1490
|
[ 26.595899] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 21 ff 08 05 02 ff 03 7e
|
1491
|
[ 26.596705] c1 mif: IPC-TX(14): 7f 0c 00 00 09 00 22 ff 08 05 02 ff 02 7e
|
1492
|
[ 26.597295] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 21 08 05 02 ff 03 01 00 00 ...
|
1493
|
[ 26.598384] c1 mif: IPC-TX(12): 7f 0a 00 00 07 00 23 ff 08 02 02 7e
|
1494
|
[ 26.598669] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 00 22 08 05 02 ff 02 04 00 00 ...
|
1495
|
[ 26.599462] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 00 23 08 02 02 02 7e
|
1496
|
[ 26.720097] c0 m5mo_isp_isr: **************** interrupt ****************
|
1497
|
[ 26.723478] c0 m5mo_check_version: *************************************
|
1498
|
[ 26.723524] c0 m5mo_check_version: F/W Version: ONEF01
|
1499
|
[ 26.723558] c0 m5mo_check_version: Binary Released: Feb 18 2017 20:35:41
|
1500
|
[ 26.723591] c0 m5mo_check_version: *************************************
|
1501
|
[ 26.730066] c0 fimc_s_input--: index 0 FIMC0
|
1502
|
[ 26.730143] c0 s3c-fimc2: FIMC2 1 opened.
|
1503
|
[ 26.730200] c0 fimc_s_input: index 0 FIMC2
|
1504
|
[ 26.730270] c0 fimc_s_input--: index 0 FIMC2
|
1505
|
[ 26.730302] c0 fimc_g_ext_ctrls_capture++
|
1506
|
[ 26.730324] c0 fimc_g_ext_ctrls_capture--
|
1507
|
[ 26.730764] c0 id 37, value 90
|
1508
|
[ 26.730784] c0 m5mo_set_jpeg_quality: E, value 90
|
1509
|
[ 26.733550] c0 id 99, value 0
|
1510
|
[ 26.733607] c0 id 90, value 0
|
1511
|
[ 26.733626] c0 m5mo_set_zoom: E, value 0
|
1512
|
[ 26.733946] c0 id 71, value 1
|
1513
|
[ 26.733966] c0 m5mo_set_flash: E, value 1
|
1514
|
[ 26.735586] c0 id 72, value 0
|
1515
|
[ 26.735607] c0 m5mo_set_exposure: E, value 0
|
1516
|
[ 26.737014] c0 id 73, value 1
|
1517
|
[ 26.737034] c0 m5mo_set_whitebalance: E, value 1
|
1518
|
[ 26.737816] c0 id 70, value 1
|
1519
|
[ 26.737836] c0 m5mo_set_scene_mode: E, value 1
|
1520
|
[ 26.738526] c0 m5mo_set_saturation: E, value 2
|
1521
|
[ 26.739111] c0 m5mo_set_sharpness: E, value 2
|
1522
|
[ 26.740791] c0 id 74, value 1
|
1523
|
[ 26.740821] c0 m5mo_set_effect: E, value 1
|
1524
|
[ 26.742644] c0 id 75, value 0
|
1525
|
[ 26.742666] c0 m5mo_set_iso: E, value 0
|
1526
|
[ 26.751002] c0 m5mo_set_mode: 0x1 -> 0x2
|
1527
|
[ 26.797859] c0 m5mo_power down
|
1528
|
[ 26.797884] c0 m5mo_power_down: in
|
1529
|
[ 26.809023] c0 s3c_csis_power: in
|
1530
|
[ 26.809046] c0 s3c_csis_power: out
|
1531
|
[ 26.813648] c0 s3c-fimc0: fimc_runtime_suspend_cap: No capture device.
|
1532
|
[ 26.834248] c0 s3c-fimc0: FIMC0 0 released.
|
1533
|
[ 26.834558] c0 s3c-fimc2: FIMC2 0 released.
|
1534
|
[ 26.911142] c1 s5p-ehci s5p-ehci: host_phy_susp
|
1535
|
[ 26.949503] c1 s3c-fimc0: FIMC0 1 opened.
|
1536
|
[ 26.949551] c1 fimc_s_input: index 1 FIMC0
|
1537
|
[ 26.949571] c1
|
1538
|
[ 26.949581] c1
|
1539
|
[ 26.949590] c1 fimc_s_input activating subdev
|
1540
|
[ 26.956934] c1 [S5K5BAFX] Default preview_width: 640 , preview_height: 480, capture_width: 1600, capture_height: 1200
|
1541
|
[ 26.956982] c1 S5K5BAFX 12-002d: driver probed!!
|
1542
|
[ 26.957011] c1 fimc_s_input activated subdev = 1
|
1543
|
[ 26.957431] c1 fimc_s_input--: index 1 FIMC0
|
1544
|
[ 26.957491] c1 s3c-fimc2: FIMC2 1 opened.
|
1545
|
[ 26.957532] c1 fimc_s_input: index 1 FIMC2
|
1546
|
[ 26.957573] c1 fimc_s_input--: index 1 FIMC2
|
1547
|
[ 26.957602] c1 fimc_g_ext_ctrls_capture++
|
1548
|
[ 26.957623] c1 fimc_g_ext_ctrls_capture--
|
1549
|
[ 26.958019] c1 [S5K5BAFX] s_ctrl: id = 37, value=90
|
1550
|
[ 26.958043] c1 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
|
1551
|
[ 26.958166] c1 [S5K5BAFX] s_ctrl: id = 99, value=7
|
1552
|
[ 26.958189] c1 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
|
1553
|
[ 26.958274] c1 [S5K5BAFX] s_ctrl: id = 72, value=0
|
1554
|
[ 26.958307] c1 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
|
1555
|
[ 26.958380] c1 [S5K5BAFX] s_ctrl: id = 70, value=1
|
1556
|
[ 26.958404] c1 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
|
1557
|
[ 26.958467] c1 [S5K5BAFX] s_ctrl: id = 75, value=0
|
1558
|
[ 26.958490] c1 [S5K5BAFX] s5k5bafx_s_ctrl: WARNING, camera not initialized
|
1559
|
[ 26.960709] c1 S5K5BAFX 12-002d: driver removed!!
|
1560
|
[ 26.961567] c1 s5k5bafx_power(): down
|
1561
|
[ 26.962334] c1 s3c_csis_power: in
|
1562
|
[ 26.962354] c1 s3c_csis_power: out
|
1563
|
[ 26.962382] c1 s3c-fimc0: fimc_runtime_suspend_cap: No capture device.
|
1564
|
[ 26.967497] c1 s3c-fimc0: FIMC0 0 released.
|
1565
|
[ 26.967941] c1 s3c-fimc2: FIMC2 0 released.
|
1566
|
[ 27.066881] c0 binder: 2291:2299 refcount change on invalid ref 181
|
1567
|
[ 27.782094] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
|
1568
|
[ 27.782135] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
|
1569
|
[ 27.782294] c0 G:P:DmaAddr=@64640000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
|
1570
|
[ 27.785476] c0 i2s_txctrl:Turn on
|
1571
|
[ 29.774843] c1 init: Service 'bootanim' (pid 1981) exited with status 0
|
1572
|
[ 29.827702] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
|
1573
|
[ 29.830158] c1 s5p-ehci s5p-ehci: host_phy_resume
|
1574
|
[ 29.869645] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
|
1575
|
[ 29.901658] c0 [TouchKey] system calling LED Notification control
|
1576
|
[ 29.910096] c1 mif: usb_port_resume: 1283, 4
|
1577
|
[ 29.911086] c1 mif: IPC-RX(95): 7f 0b 00 00 08 00 ff 23 0d 0c 03 00 7e 7f 15 00 ...
|
1578
|
[ 29.937671] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 24 ff 08 02 02 7e
|
1579
|
[ 29.938226] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 25 ff 08 03 02 7e
|
1580
|
[ 29.938875] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 26 ff 08 05 02 ff 03 7e
|
1581
|
[ 29.939273] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 27 ff 08 05 02 ff 02 7e
|
1582
|
[ 29.939589] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 24 08 02 02 02 7e
|
1583
|
[ 29.939725] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 28 ff 08 02 02 7e
|
1584
|
[ 29.941219] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 25 08 03 02 02 04 04 32 32 ...
|
1585
|
[ 29.942045] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 29 ff 08 03 02 7e
|
1586
|
[ 29.942226] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 26 08 05 02 04 03 01 03 34 ...
|
1587
|
[ 29.942790] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 2a ff 08 05 02 ff 03 7e
|
1588
|
[ 29.943993] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 27 08 05 02 04 02 04 03 34 ...
|
1589
|
[ 29.944731] c0 mif: IPC-TX(12): 7f 0a 00 00 07 00 2b ff 08 02 02 7e
|
1590
|
[ 29.945098] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 28 08 02 02 02 7e
|
1591
|
[ 29.947127] c1 mif: IPC-RX(46): 7f 15 00 00 12 00 ff 29 08 03 02 02 04 04 32 32 ...
|
1592
|
[ 29.948403] c0 mif: IPC-TX(14): 7f 0c 00 00 09 00 2c ff 08 05 02 ff 02 7e
|
1593
|
[ 29.948704] c1 mif: IPC-RX(13): 7f 0b 00 00 08 00 ff 2b 08 02 02 02 7e
|
1594
|
[ 29.949582] c1 mif: IPC-RX(23): 7f 15 00 00 12 00 ff 2c 08 05 02 04 02 04 03 34 ...
|
1595
|
[ 30.026221] c0 lcd panel: acl_set_store - 0, 1
|
1596
|
[ 30.162992] c0 mdnie mdnie: outdoor_store :: value=0
|
1597
|
[ 30.163031] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
|
1598
|
[ 30.167221] c0 mdnie mdnie: outdoor_store :: value=0
|
1599
|
[ 30.167259] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
|
1600
|
[ 30.176590] c0 mdnie mdnie: outdoor_store :: value=0
|
1601
|
[ 30.176627] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
|
1602
|
[ 30.216180] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
|
1603
|
[ 30.224017] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
|
1604
|
[ 30.240253] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=480
|
1605
|
[ 30.265122] c0 mif: usb_port_resume: 1283, 4
|
1606
|
[ 30.266110] c1 mif: IPC-RX(29): 7f 0e 00 00 0b 00 ff 2c 07 01 03 ff 04 00 04 7e ...
|
1607
|
[ 30.580316] c0 s5p-ehci s5p-ehci: host_phy_susp
|
1608
|
[ 30.942496] c1 max17042 9-0036: max17042_get_soc : soc(0dd1)
|
1609
|
[ 30.942533] c1 max17042_need_soc_recal: HW(0xe)
|
1610
|
[ 30.942558] c1 max17042 9-0036: max17042_get_soc : use raw (13), soc (13)
|
1611
|
[ 31.185566] c0 i2s_txctrl: Turn Off - spr is no active
|
1612
|
[ 31.185655] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
|
1613
|
[ 31.185687] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
|
1614
|
[ 31.560359] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
|
1615
|
[ 31.690982] c0 mdnie mdnie: scenario_store :: value=0
|
1616
|
[ 31.691019] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
|
1617
|
[ 31.694459] c0 mdnie mdnie: negative_store :: value=0, by settings.device
|