Replicant

19 (15:5.4.1+svn241155-1) ) #2 SMP PREEMPT Fri Aug 4 15:13:05 UTC 2017

[    0.000000] c0 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d

[    0.000000] c0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache

[    0.000000] c0 Machine: SMDK4x12

[    0.000000] c0 cma: CMA: reserved 16 MiB at 65800000

[    0.000000] c0 cma: CMA: reserved 40 MiB at 5c800000

[    0.000000] c0 cma: CMA: reserved 16 MiB at 72000000

[    0.000000] c0 Memory policy: ECC disabled, Data cache writealloc

[    0.000000] c0 CPU EXYNOS4412 (id 0xe4412211)

[    0.000000] c0 exynos4_init_clocks: initializing clocks

[    0.000000] c0 S3C24XX Clocks, Copyright 2004 Simtec Electronics

[    0.000000] c0 s3c_register_clksrc: clock audiocdclk has no registers set

[    0.000000] c0 audiocdclk: no parent clock specified

[    0.000000] c0 s3c_register_clksrc: clock armclk has no registers set

[    0.000000] c0 exynos4_setup_clocks: registering clocks

[    0.000000] c0 exynos4_setup_clocks: xtal is 24000000

[    0.000000] c0 EXYNOS4: PLL settings, A=800000000, M=800000000, E=96000000 V=108000000

[    0.000000] c0 EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=24000000

[    0.000000] c0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000

[    0.000000] c0 EXYNOS4: ACLK400=24000000 ACLK266=800000000

[    0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000

[    0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000

[    0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000

[    0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000

[    0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000

[    0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000

[    0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 1500000

[    0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 1500000

[    0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000

[    0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000

[    0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000

[    0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000

[    0.000000] c0 sclk_fimd: source is mout_mpll_user (6), rate is 400000000

[    0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 1500000

[    0.000000] c0 sclk_mdnie: source is mout_mpll_user (6), rate is 400000000

[    0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 1500000

[    0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000

[    0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000

[    0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 50000000

[    0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 50000000

[    0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 3000000

[    0.000000] c0 S5P/CMA: Reserved 0x70000000/0x00bcc000 for 'fimc_is'

[    0.000000] c0 S5P/CMA: Reserved 0x71700000/0x00800000 for 'fimd'

[    0.000000] c0 S5P/CMA: Reserved 0x6c300000/0x03d00000 for 'fimc0'

[    0.000000] c0 S5P/CMA: Reserved 0x71600000/0x00100000 for 'srp'

[    0.000000] c0 S5P/CMA: Reserved 0x64000000/0x00400000 for 'mfc-normal'

[    0.000000] c0 S5P/CMA: Reserving 0x7800000 for secure region aligned by 0x4000000.

[    0.000000] c0 S5P/CMA: Reserved 0x5c000000/0x00100000 for 'sectbl'

[    0.000000] c0 S5P/CMA: Reserved 0x5c100000/0x03100000 for 'mfc-secure'

[    0.000000] c0 S5P/CMA: Reserved 0x5f200000/0x04600000 for 'ion'

[    0.000000] c0 (sec_debug_set_upload_magic) 66262564

[    0.000000] c0 (sec_debug_set_upload_cause) cafebabe

[    0.000000] c0 On node 0 totalpages: 261632

[    0.000000] c0 free_area_init_node: node 0, pgdat c09f3660, node_mem_map c0e84000

[    0.000000] c0   Normal zone: 1632 pages used for memmap

[    0.000000] c0   Normal zone: 0 pages reserved

[    0.000000] c0   Normal zone: 207264 pages, LIFO batch:31

[    0.000000] c0   HighMem zone: 412 pages used for memmap

[    0.000000] c0   HighMem zone: 52324 pages, LIFO batch:15

[    0.000000] c0 sec_debug_magic_init: success reserving magic code area

[    0.000000] c0 PERCPU: Embedded 7 pages/cpu @c168c000 s7008 r8192 d13472 u32768

[    0.000000] c0 pcpu-alloc: s7008 r8192 d13472 u32768 alloc=8*4096

[    0.000000] c0 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 

[    0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on.Total pages: 259588

[    0.000000] c0 Kernel command line: console=ttySAC2,115200 consoleblank=0 androidboot.hardware=smdk4x12 console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x100000@0x46000000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=96 consoleblank=0 lpcharge=0 lpj=3981312 vmalloc=144m oops=panic pmic_info=65 cordon=ea92cb8a023c8293e2a604d2d0d04dbd connie=GT-I9300_OPEN_EUR_983b5280e58a7bc77a7c6fe07df47a05 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=I9300XXUGNG3 androidboot.serialno=3230158f0c5c802d snd_soc_core.pmdown_time=1000

[    0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:cb8 sec_log_buf:fd200000 sec_log_size:1048576

[    0.000000] c0 sec_log_save_old: saved old log at 3256@c16ab120

[    0.000000] c0 sec_getlog_supply_kloginfo: 0xc6000000

[    0.000000] c0 battery_get_lpm_state: Low power charging mode: 0

[    0.000000] c0 /home/fil/repsource/kernel/samsung/smdk4412/drivers/misc/max77693-muic.c get_if_pmic_inifo: switch_sel: 1 if_pmic_rev:4

[    0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)

[    0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] c0 allocated 4186112 bytes of page_cgroup

[    0.000000] c0 please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] c0 Memory: 1022MB = 1022MB total

[    0.000000] c0 Memory: 772896k/772896k available, 273632k reserved, 210944K highmem

[    0.000000] c0 Virtual kernel memory layout:

[    0.000000] c0     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000] c0     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000] c0     DMA     : 0xfea00000 - 0xffe00000   (  20 MB)

[    0.000000] c0     vmalloc : 0xf3800000 - 0xfc000000   ( 136 MB)

[    0.000000] c0     lowmem  : 0xc0000000 - 0xf3000000   ( 816 MB)

[    0.000000] c0     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

[    0.000000] c0     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

[    0.000000] c0       .init : 0xc0008000 - 0xc0042000   ( 232 kB)

[    0.000000] c0       .text : 0xc0042000 - 0xc0898000   (8536 kB)

[    0.000000] c0       .data : 0xc0898000 - 0xc0a078c0   (1471 kB)

[    0.000000] c0        .bss : 0xc0a078e4 - 0xc0e83ef8   (4594 kB)

[    0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] c0 Preemptible hierarchical RCU implementation.

[    0.000000] c0 NR_IRQS:501

[    0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify

[    0.000000] c0 Console: colour dummy device 80x30

[    0.000000] c0 Calibrating delay loop (skipped) preset value.. 1592.52 BogoMIPS (lpj=3981312)

[    0.000000] c0 pid_max: default: 32768 minimum: 301

[    0.000000] c0 Security Framework initialized

[    0.000000] c0 SELinux:  Initializing.

[    0.000000] c0 SELinux:  Starting in permissive mode

[    0.000000] c0 Mount-cache hash table entries: 512

[    0.000000] c0 Initializing cgroup subsys debug

[    0.000000] c0 Initializing cgroup subsys cpuacct

[    0.000000] c0 Initializing cgroup subsys memory

[    0.000000] c0 Initializing cgroup subsys freezer

[    0.000000] c0 CPU: Testing write buffer coherency: ok

[    0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify

[    0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify

[    0.000000] c0 L310 cache controller enabled

[    0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B

[    0.030000] c1 CPU1: Booted secondary processor

[    0.030000] c1 CPU1: Booted secondary processor

[    0.030000] c1 notifier_call_chain : NOTIFY BAD tick_notify

[    0.060000] c2 CPU2: Booted secondary processor

[    0.060000] c2 CPU2: Booted secondary processor

[    0.060000] c2 notifier_call_chain : NOTIFY BAD tick_notify

[    0.090000] c3 CPU3: Booted secondary processor

[    0.090000] c3 CPU3: Booted secondary processor

[    0.090000] c3 notifier_call_chain : NOTIFY BAD tick_notify

[    0.100000] c0 Brought up 4 CPUs

[    0.100000] c0 SMP: Total of 4 processors activated (6370.09 BogoMIPS).

[    0.105000] c0 gpio: GPK0 has missing PM functions

[    0.105000] c0 print_constraints: dummy: 

[    0.110000] c0 NET: Registered protocol family 16

[    0.110000] c0 migrating range 72000 72280, retry (0)

[    0.135000] c0 DMA: preallocated 2560 KiB pool for atomic coherent allocations

[    0.140000] c0 midas_config_gpio_table

[    0.140000] c0 midas_power_init

[    0.140000] c0 [TSP] midas_tsp_init() is called

[    0.140000] c0 Registered chained gpio int handler for interrupt 110.

[    0.140000] c0 Registered interrupt support for gpio group 25.

[    0.140000] c0 midas_tsp_init touch : 387

[    0.140000] c0 Sound: start midas_sound_init

[    0.140000] c0 Registered chained gpio int handler for interrupt 111.

[    0.140000] c0 Registered interrupt support for gpio group 11.

[    0.140000] c0 s5p_gpioint_set_type irq:395 is at GPJ0(3)

[    0.140000] c0 midas_machine_init() register sii9234 driver

[    0.140000] c0 Registered interrupt support for gpio group 10.

[    0.140000] c0 mipi_fb_init :: fb_platform_data.hw_ver = 0x70

[    0.140000] c0 usb: smdk4212_usbgadget_init: default luns=0, new luns=2

[    0.140000] c0 brcm_wlan_init: start

[    0.140000] c0 brcm_init_wlan_mem: WIFI MEM Allocated

[    0.140000] c0 -----------------------------------------------------

[    0.140000] c0 -----------------------------------------------------

[    0.140000] c0 -----------------------------------------------------

[    0.140000] c0 regist ret:0

[    0.145000] c0 ram_console: invalid start 0 or end 0

[    0.155000] c0 exynos4_pmu_init: PMU supports 4412(96)

[    0.155000] c0 S3C Power Management, Copyright 2004 Simtec Electronics

[    0.155000] c0 EXYNOS4: Initializing architecture

[    0.155000] c0 s3c-adc samsung-adc-v4: attached adc driver

[    0.155000] c0 samsung-pd samsung-pd.0: power domain registered

[    0.155000] c0 samsung-pd samsung-pd.1: power domain registered

[    0.155000] c0 samsung-pd samsung-pd.2: power domain registered

[    0.155000] c0 lcd0 disable skip only one time

[    0.155000] c0 samsung-pd samsung-pd.5: power domain registered

[    0.155000] c0 samsung-pd samsung-pd.4: power domain registered

[    0.155000] c0 samsung-pd samsung-pd.6: power domain registered

[    0.160000] c0 samsung-pd samsung-pd.8: power domain registered

[    0.160000] c0 samsung-pd samsung-pd.7: power domain registered

[    0.160000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0

[    0.160000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8

[    0.160000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12

[    0.160000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.15: Initialized for s5p-fimg2d.

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.5: Initialized for s5p-jpeg.

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.16: Initialized for exynos4-fimc-is.

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.17: Initialized for exynos4-fimc-is.

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.18: Initialized for exynos4-fimc-is.

[    0.160000] c0 s5p-sysmmu s5p-sysmmu.19: Initialized for exynos4-fimc-is.

[    0.190000] c0 bio: create slab <bio-0> at 0

[    0.190000] c0 print_constraints: VBATT: 5000 mV 

[    0.190000] c0 max77686_pmic_init

[    0.190000] c0 SCSI subsystem initialized

[    0.190000] c0 usbcore: registered new interface driver usbfs

[    0.190000] c0 usbcore: registered new interface driver hub

[    0.190000] c0 usbcore: registered new device driver usb

[    0.190000] c0 i2c-gpio i2c-gpio.19: using pins 138 (SDA) and 137 (SCL)

[    0.190000] c0 i2c-gpio i2c-gpio.8: using pins 115 (SDA) and 114 (SCL)

[    0.195000] c0 i2c-gpio i2c-gpio.9: using pins 47 (SDA) and 48 (SCL)

[    0.195000] c0 i2c-gpio i2c-gpio.10: using pins 151 (SDA) and 152 (SCL)

[    0.195000] c0 i2c-gpio i2c-gpio.11: using pins 149 (SDA) and 150 (SCL)

[    0.195000] c0 i2c-gpio i2c-gpio.14: using pins 61 (SDA) and 60 (SCL)

[    0.195000] c0 i2c-gpio i2c-gpio.15: using pins 51 (SDA) and 53 (SCL)

[    0.195000] c0 i2c-gpio i2c-gpio.16: using pins 91 (SDA) and 89 (SCL)

[    0.195000] c0 max77693_i2c_probe: device found: rev.0x4, ver.0x0

[    0.265000] c0 max77693-safeout max77693-safeout: max77693_pmic_probe

[    0.265000] c0 regulator regulator.2: func:max77693_reg_enable

[    0.265000] c0 regulator regulator.2: func:max77693_get_rid

[    0.265000] c0 regulator regulator.2: func:max77693_get_enable_register

[    0.265000] c0 regulator regulator.2: func:max77693_get_voltage

[    0.265000] c0 regulator regulator.2: func:max77693_get_rid

[    0.265000] c0 regulator regulator.2: func:max77693_get_voltage_register

[    0.265000] c0 regulator regulator.2: func:max77693_get_rid

[    0.265000] c0 regulator regulator.2: func:max77693_list_voltage_safeout

[    0.265000] c0 print_constraints: safeout1 range: at 4900 mV 

[    0.265000] c0 regulator regulator.3: func:max77693_get_voltage

[    0.265000] c0 regulator regulator.3: func:max77693_get_rid

[    0.265000] c0 regulator regulator.3: func:max77693_get_voltage_register

[    0.265000] c0 regulator regulator.3: func:max77693_get_rid

[    0.265000] c0 regulator regulator.3: func:max77693_list_voltage_safeout

[    0.265000] c0 print_constraints: safeout2 range: at 4900 mV 

[    0.265000] c0 regulator regulator.4: func:max77693_reg_enable

[    0.265000] c0 regulator regulator.4: func:max77693_get_rid

[    0.265000] c0 regulator regulator.4: func:max77693_get_enable_register

[    0.270000] c0 regulator regulator.4: func:max77693_get_voltage

[    0.270000] c0 regulator regulator.4: func:max77693_get_rid

[    0.270000] c0 regulator regulator.4: func:max77693_get_voltage_register

[    0.270000] c0 regulator regulator.4: func:max77693_get_rid

[    0.270000] c0 regulator regulator.4: func:max77693_list_voltage

[    0.270000] c0 print_constraints: CHARGER: 60 <--> 2580 mA at 460 mA 

[    0.270000] c0 i2c-gpio i2c-gpio.17: using pins 266 (SDA) and 267 (SCL)

[    0.270000] c0 i2c-gpio i2c-gpio.21: using pins 72 (SDA) and 71 (SCL)

[    0.270000] c0 i2c-gpio i2c-gpio.12: using pins 231 (SDA) and 232 (SCL)

[    0.270000] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter

[    0.270000] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter

[    0.270000] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter

[    0.270000] c0 s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter

[    0.270000] c0 max77686 7-0009: device found

[    0.270000] c0 max77686_irq_init+

[    0.270000] c0 max77686_irq_init: gpio_irq=1

[    0.275000] c0 max77686_irq_init-

[    0.275000] c0 max77686_pmic_probe

[    0.280000] c0 max77686_pmic_probe: DEVICE ID=0x2

[    0.280000] c0 print_constraints: vdd_mif range: 850 <--> 1050 mV at 1000 mV 

[    0.280000] c0 print_constraints: vdd_arm range: 850 <--> 1500 mV at 1100 mV 

[    0.280000] c0 print_constraints: vdd_int range: 850 <--> 1100 mV at 1000 mV 

[    0.285000] c0 print_constraints: vdd_g3d range: 850 <--> 1075 mV at 1000 mV 

[    0.285000] c0 print_constraints: CAM_ISP_CORE_1.2V: 1000 <--> 1200 mV at 1200 mV 

[    0.285000] c0 print_constraints: VCC_1.8V_AP: 1800 mV 

[    0.285000] c0 print_constraints: VCC_1.8V_IO: 1800 mV 

[    0.285000] c0 print_constraints: VMIPI_1.0V: 1000 mV 

[    0.285000] c0 print_constraints: CAM_ISP_MIPI_1.2V: 1200 mV 

[    0.285000] c0 print_constraints: VMIPI_1.8V: 1800 mV 

[    0.290000] c0 print_constraints: VABB1_1.95V: 1950 mV 

[    0.290000] c0 print_constraints: VUOTG_3.0V: 3000 mV 

[    0.290000] c0 print_constraints: VABB2_1.95V: 1950 mV 

[    0.290000] c0 print_constraints: CAM_SENSOR_CORE_1.2V: 1200 mV 

[    0.290000] c0 print_constraints: CAM_ISP_SENSOR_1.8V: 1800 mV 

[    0.290000] c0 print_constraints: VT_CAM_1.8V: 1800 mV 

[    0.290000] c0 print_constraints: VTF_2.8V: 2800 mV 

[    0.295000] c0 print_constraints: TSP_AVDD_3.3V: 3300 mV 

[    0.295000] c0 print_constraints: VDD_1.8V_TSP: 1800 mV 

[    0.295000] c0 print_constraints: VCC_3.3V_LCD: 3300 mV 

[    0.295000] c0 print_constraints: VCC_MOTOR_3.0V: 3000 mV 

[    0.295000] c0 print_constraints: 32KHZ_PMIC: 

[    0.295000] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter

[    0.295000] c0 max77686 5-0009: device not found on this channel (this is not an error)

[    0.295000] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter

[    0.295000] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.

[    0.300000] c0 Bluetooth: Core ver 2.16

[    0.300000] c0 NET: Registered protocol family 31

[    0.300000] c0 Bluetooth: HCI device and connection manager initialized

[    0.300000] c0 Bluetooth: HCI socket layer initialized

[    0.300000] c0 Bluetooth: L2CAP socket layer initialized

[    0.300000] c0 Bluetooth: SCO socket layer initialized

[    0.300000] c0 cfg80211: Calling CRDA to update world regulatory domain

[    0.300000] c0 Switching to clocksource mct-frc

[    0.303019] c0 Switched to NOHz mode on CPU #0

[    0.303425] c3 Switched to NOHz mode on CPU #3

[    0.303454] c2 Switched to NOHz mode on CPU #2

[    0.303505] c1 Switched to NOHz mode on CPU #1

[    0.314055] c0 NET: Registered protocol family 2

[    0.314277] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.315061] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[    0.316961] c0 TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

[    0.317984] c0 TCP: Hash tables configured (established 131072 bind 65536)

[    0.318023] c0 TCP reno registered

[    0.318050] c0 UDP hash table entries: 512 (order: 2, 16384 bytes)

[    0.318111] c0 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[    0.318534] c0 NET: Registered protocol family 1

[    0.318768] c0 Trying to unpack rootfs image as initramfs...

[    0.367706] c0 Freeing initrd memory: 820K

[    0.367837] c0 PMU: registered new PMU device of type 0

[    0.368075] c0 Exynos4 : ARM Clock down on idle mode is enabled

[    0.369927] c0 gps_bcm475x_init - system_rev : c

[    0.370161] c0 i2c 15-0039: i2c_add_devices - added sii9234_mhl_tx successfully

[    0.370364] c0 i2c 15-003d: i2c_add_devices - added sii9234_tpi successfully

[    0.370557] c0 i2c 15-0049: i2c_add_devices - added sii9234_hdmi_rx successfully

[    0.370754] c0 i2c 15-0064: i2c_add_devices - added sii9234_cbus successfully

[    0.370956] c0 i2c 5-003a: i2c_add_devices - added s5p_ddc successfully

[    0.371169] c0 i2c 5-002b: i2c_add_devices - added pn65n successfully

[    0.371207] c0 accel_gpio_init

[    0.371232] c0 gyro_gpio_init

[    0.371415] c0 i2c 1-0019: i2c_add_devices - added lsm330dlc_accel successfully

[    0.371610] c0 i2c 1-006b: i2c_add_devices - added lsm330dlc_gyro successfully

[    0.371651] c0 optical_gpio_init

[    0.371837] c0 i2c 9-0018: i2c_add_devices - added cm36651 successfully

[    0.371874] c0 ak8975c_gpio_init

[    0.372055] c0 i2c 10-000c: i2c_add_devices - added ak8975 successfully

[    0.372094] c0 lps331_gpio_init

[    0.372274] c0 i2c 11-005d: i2c_add_devices - added lps331ap successfully

[    0.373425] c0 wake enabled for irq 374

[    0.373655] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading

[    0.374134] c0 migrating range 72280 72281, retry (0)

[    0.384125] c0 Loaded driver for PL330 DMAC-0 s3c-pl330

[    0.384161] c0 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32

[    0.384377] c0 migrating range 72281 72282, retry (0)

[    0.393857] c0 Loaded driver for PL330 DMAC-1 s3c-pl330

[    0.393893] c0 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32

[    0.394105] c0 migrating range 72282 72283, retry (0)

[    0.403565] c0 Loaded driver for PL330 DMAC-2 s3c-pl330

[    0.403602] c0 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32

[    0.403968] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.404127] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.404590] c0 audit: initializing netlink socket (disabled)

[    0.404649] c0 type=2000 audit(0.400:1): initialized

[    0.409794] c0 highmem bounce pool size: 64 pages

[    0.410163] c0 ashmem: initialized

[    0.424153] c0 fuse init (API version 7.16)

[    0.424978] c0 msgmni has been set to 1243

[    0.425157] c0 SELinux:  Registering netfilter hooks

[    0.425653] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.425788] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.425919] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.426058] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.426187] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.426315] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.426441] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.426575] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.426799] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.426947] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.427123] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.427741] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.427902] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.427941] c2 alg: comp: Compression test 1 failed for lzo-generic: output len = 57

[    0.428064] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.428098] c2 FIPS: No test for lz4 (lz4-generic)

[    0.428187] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    0.428220] c2 FIPS: No test for stdrng (krng)

[    0.428278] c0 io scheduler noop registered

[    0.428304] c0 io scheduler deadline registered

[    0.428429] c0 io scheduler cfq registered (default)

[    0.428460] c0 io scheduler row registered

[    0.428485] c0 io scheduler sio registered

[    0.428686] c0 s3cfb s3cfb.0: vclk=57153600, div=14(2), rate=400000000

[    0.428812] c0 s3cfb s3cfb.0: fimd sclk rate 400000000, clkdiv 0xffff11

[    0.429182] c0 s3cfb s3cfb.0: [fb2] dma: 0x71700000, cpu: 0xf38a9000, size: 0x00708000

[    0.432743] c0 sec_getlog_supply_fbinfo: 0x71700000 720 1280 32 2

[    0.436963] c0 Bootloader sent 'bootloaderfb' : 5EC00000

[    0.437977] c0 s3cfb s3cfb.0: parent clock: 400000000, vclk: 57155000, vclk div: 7

[    0.438118] c0 graphics fb0: mout_mpll rate is 800000000, fimd divider=7

[    0.438158] c0 graphics fb0: 60hz div is 2

[    0.438184] c0 graphics fb0: 40hz div is 3

[    0.438224] c0 graphics fb0: lcdfreq_init is done

[    0.438252] c0 s3cfb s3cfb.0: registered successfully

[    0.438815] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD

[    0.438856] c0 mdnie mdnie: registered successfully

[    0.445174] c0 s5p-dsim s5p-dsim.0: rxhd : 1000031a

[    0.445205] c0 s5p-dsim s5p-dsim.0: rcv size : 3

[    0.445235] c0 s5p-dsim s5p-dsim.0: pkt-l : 109060a2

[    0.445266] c0 lcd panel: ID: a2, 60, 90

[    0.445290] c0 lcd panel: s6e8aa0 lcd panel driver has been probed.

[    0.445324] c0 Dynamic ELVSS Information, 0x10

[    0.461878] c0 s5p-dsim s5p-dsim.0: rxhd : 1500181a

[    0.461908] c0 s5p-dsim s5p-dsim.0: rcv size : 24

[    0.461936] c0 s5p-dsim s5p-dsim.0: pkt : fd060600

[    0.461965] c0 s5p-dsim s5p-dsim.0: pkt : fd010708

[    0.461994] c0 s5p-dsim s5p-dsim.0: pkt : fd02ff00

[    0.462023] c0 s5p-dsim s5p-dsim.0: pkt : f6010806

[    0.462051] c0 s5p-dsim s5p-dsim.0: pkt : fd000b00

[    0.462079] c0 s5p-dsim s5p-dsim.0: pkt : fc010807

[    0.462238] c0 look index : 14

[    0.462258] c0 look index : 31

[    0.462277] c0 look index : 51

[    0.462297] c0 look index : 73

[    0.462342] c0 AID Dimming is started. 96

[    0.478602] c0 lcd panel: brightness=160, bl=18, candela=160

[    0.478643] c0 s5p_gpioint_set_type irq:400 is at GPF3(0)

[    0.478795] c0 s5p-dsim s5p-dsim.0: mipi-dsi driver has been probed

[    0.479320] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

[    0.780374] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10

[    0.865082] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10

[    0.940080] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10

[    0.992193] c0 console [ttySAC2] enabled

[    1.060086] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10

[    1.155433] c0 Mali: ::Q::exynos_result_of_asv : 0

[    1.155465] c0 Mali: mali_dvfs[0].vol = 950000 

[    1.155494] c0 Mali: mali_dvfs[1].vol = 975000 

[    1.155522] c0 Mali: mali_runtime_resume.vol = 975000 

[    1.155553] c0 Mali: mali_dvfs[2].vol = 1050000 

[    1.155581] c0 Mali: mali_dvfs[3].vol = 1100000 

[    1.155610] c0 Mali: init_gpu_vol = 1100000 

[    1.156029] c0 Mali: Mali frequency 440

[    1.156055] c0 Mali: init_mali_clock mali_clock c0975018

[    1.156271] c0 Mali: = regulator_set_voltage: 1100000, 1100000 

[    1.156673] c0 Mali: Mali frequency 440

[    1.157154] c0 migrating range 72300 72b00, retry (0)

[    1.184318] c0 Mali: Mali device driver loaded

[    1.184674] c0 UMP: UMP device driver 0000 loaded

[    1.192851] c0 brd: module loaded

[    1.196942] c0 loop: module loaded

[    1.197538] c0 zram: Created 1 device(s) ...

[    1.197587] c0 lkdtm: No crash points registered, enable through debugfs

[    1.198234] c0 func:max77693_muic_init

[    1.198326] c0 func:max77693_muic_probe

[    1.198359] c0 max77693-muic max77693-muic: adc:437 chgtype:441, adc1k440

[    1.198651] c0 input: max77693-muic as /devices/platform/i2c-gpio.17/i2c-17/17-0066/max77693-muic/input/input0

[    1.198715] c0 max77693-muic max77693-muic: H/W rev connected UT1 UR2 pin to AP UART

[    1.198757] c0 max77693_muic_probe: switch_sel: 1

[    1.199086] c0 MUIC ret=0

[    1.199109] c0 max77693-muic max77693-muic: func:max77693_muic_set_adcdbset value:2

[    1.199152] c0 max77693-muic max77693-muic: max77693_muic_set_adcdbset: ADCDBSET(0x20)

[    1.200089] c0 max77693-muic max77693-muic: func:max77693_muic_irq_init

[    1.200128] c0 max77693-muic max77693-muic: max77693_muic_irq_init: system_rev=c

[    1.201780] c2 max77693_irq_thread: interrupt source(0x08)

[    1.202859] c2 max77693_irq_thread: muic interrupt(0x00, 0x13, 0x00)

[    1.211450] c0 max77693-muic max77693-muic: adc:437 chgtype:441 adc1k:440 vbvolt:445

[    1.211990] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=7, val=9

[    1.212526] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=8, val=11

[    1.213063] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=9, val=0

[    1.213599] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=1, val=0

[    1.214135] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=2, val=0

[    1.214670] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=3, val=0

[    1.215223] c0 max77693_set_jig_state: 0

[    1.215875] c0 print_constraints: WM1811 LDO1: at 3000 mV 

[    1.216342] c0 print_constraints: WM1811 LDO2: at 1050 mV 

[    1.246924] c0 wm8994 4-001a: Succeeded to read ID register

[    1.249062] c0 wm8994 4-001a: WM1811 revision C CUST_ID 00

[    1.253893] c0 Loading pn65n driver

[    1.253956] c0 pn65n 5-002b: pn65n_probe : IRQ num 367

[    1.254187] c0 pn65n 5-002b: pn65n_probe : requesting IRQ 367

[    1.256610] c0 PPP generic driver version 2.4.2

[    1.256975] c0 PPP Deflate Compression module registered

[    1.257008] c0 PPP BSD Compression module registered

[    1.257464] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    1.257536] c2 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[    1.257843] c0 PPP MPPE Compression module registered

[    1.257874] c0 NET: Registered protocol family 24

[    1.257906] c0 tun: Universal TUN/TAP device driver, 1.6

[    1.257937] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[    1.258360] c0 usbcore: registered new interface driver ath9k_htc

[    1.258598] c0 host_notifier host_notifier.0: notifier_prove

[    1.259291] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.259521] c0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.259893] c0 usbcore: registered new interface driver usblp

[    1.259926] c0 Initializing USB Mass Storage driver...

[    1.260119] c0 usbcore: registered new interface driver usb-storage

[    1.260155] c0 USB Mass Storage support registered.

[    1.260475] c0 usbcore: registered new interface driver usbserial

[    1.260510] c0 usbserial: USB Serial Driver core

[    1.260655] c0 USB Serial support registered for pl2303

[    1.260827] c0 usbcore: registered new interface driver pl2303

[    1.260861] c0 pl2303: Prolific PL2303 USB to serial adaptor driver

[    1.261170] c0 migrating range 72283 72284, retry (0)

[    1.266629] c0 max77693-muic:max77693_muic_dock_detect CONTROL1:9

[    1.267273] c0 max77693-muic:max77693_muic_dock_detect STATUS1:0x3f, 2:0x41

[    1.267316] c0 max77693-muic:max77693_muic_dock_detect adc:1f adcerr:0 chgtyp:1 vb:40 dxovp:0 cable_type:17

[    1.272401] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics

[    1.272442] c0 s3c-udc : version 15 March 2009

[    1.272471] c0 init

[    1.273086] c0 usb: android_bind disconnect

[    1.273113] c0 usb: usb_gadget_disconnect

[    1.275359] c0 usb: usb_string_id cdev(0xeb90f540)->next_string_id=1

[    1.275510] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11

[    1.275551] c0 android_usb gadget: Number of LUNs=1

[    1.275582] c0  lun0: LUN: removable file: (no medium)

[    1.276484] c0 usb: usb_string_id cdev(0xeb90f540)->next_string_id=2

[    1.276522] c0 usb: usb_string_id cdev(0xeb90f540)->next_string_id=3

[    1.276563] c0 usb: usb_string_id cdev(0xeb90f540)->next_string_id=4

[    1.276600] c0 usb: composite_bind idVendor=0x0, idProduct=0x0

[    1.276633] c0 usb: composite_bind bcdDevice=0x0

[    1.276660] c0 usb: composite_bind composite_manufacturer=

[    1.276696] c0 android_usb gadget: android_usb ready

[    1.276723] c0 usb: Skip udc_enable

[    1.277102] c0 mousedev: PS/2 mouse device common for all mice

[    1.278294] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input1

[    1.278567] c0 [keys]PWR 0

[    1.279053] c0 input: sec_touchscreen as /devices/platform/s3c2440-i2c.3/i2c-3/3-0048/input/input2

[    1.279292] c0 [TSP] melfas_power on

[    1.385312] c0 melfas-ts 3-0048: [TSP]fw version 0xbd !!!!

[    1.385514] c0 melfas-ts 3-0048: [TSP]hw rev = 0x01

[    1.386034] c0 [TSP] ISC Ver [0xbd] [0x22] [0x22]

[    1.389102] c0 melfas-ts 3-0048: 4.8 fw version update does not need

[    1.389764] c0 [TSP] ISC Ver [0xbd] [0x22] [0x22]

[    1.393888] c0 s5p_gpioint_set_type irq:387 is at GPM2(3)

[    1.394083] c0 melfas-ts 3-0048: Melfas MMS-series touch controller initialized

[    1.395823] c0 max77686_rtc_probe

[    1.420215] c0 max77686-rtc max77686-rtc: max77686_rtc_init_reg: bypass init

[    1.420259] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr: enable WTSR

[    1.470052] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_smpl: enable SMPL

[    1.545392] c0 max77686_rtc_read_time: 117/7/30 21:6:47(3)

[    1.570391] c0 max77686_rtc_read_alarm: 117/7/30 20:48:19(3)

[    1.571052] c0 using rtc device, max77686-rtc, for alarms

[    1.571108] c0 max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0

[    1.571155] c0 max77686_irq_unmask: group=2, cur=0xfd

[    1.571771] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics

[    1.571917] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling

[    1.571985] c0 s3c-rtc exynos-rtc: warning: invalid RTC value so initializing it

[    1.572261] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1

[    1.572481] c0 i2c /dev entries driver

[    1.575762] c0 Linux media interface: v0.10

[    1.576218] c0 lirc_dev: IR Remote Control driver registered, major 249 

[    1.576256] c0 IR NEC protocol handler initialized

[    1.576284] c0 IR RC5(x) protocol handler initialized

[    1.576312] c0 IR RC6 protocol handler initialized

[    1.576339] c0 IR JVC protocol handler initialized

[    1.576366] c0 IR Sony protocol handler initialized

[    1.576393] c0 IR RC5 (streamzap) protocol handler initialized

[    1.576426] c0 IR LIRC bridge handler initialized

[    1.576453] c0 Linux video capture interface: v2.00

[    1.576937] c0 s5c73m3_spi_init

[    1.578635] c0 s5c73m3_spi successfully probed

[    1.583473] c0 [INFO]flite_probe:2121: FIMC-LITE0 probe success

[    1.583539] c0 [INFO]flite_probe:2121: FIMC-LITE1 probe success

[    1.583842] c0 fimc_is_init_mem_mgr : [cma_info] start_addr : 0x70000000, end_addr : 0x70bcc000, total_size : 0xbcc000, free_size : 0xbcc000

[    1.583972] c0 ctrl->mem.base = 0x70000000

[    1.583997] c0 ctrl->mem.size = 0xbcc000

[    1.584021] c0 ctrl->mem.fw_ref_base = 0x70a01000

[    1.584048] c0 ctrl->mem.setfile_ref_base = 0x70b81000

[    1.584587] c0 FIMC-IS probe completed

[    1.584864] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully

[    1.584932] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully

[    1.585148] c0 Initialize JPEG driver

[    1.587682] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12

[    1.587908] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11

[    1.588179] c0 S5P HPD Driver, (c) 2009 Samsung Electronics

[    1.588462] c0 s5p_int_src_ext_hpd()

[    1.588490] c0 s5p_hpd_read_gpio(0)

[    1.588680] c0 s5p_hpd_read_gpio(0)

[    1.589320] c0 i2c i2c-5: attached s5p_ddc into i2c adapter successfully

[    1.589486] c0 i2c-core: driver [s5p_ddc] using legacy suspend method

[    1.589522] c0 i2c-core: driver [s5p_ddc] using legacy resume method

[    1.589787] c0 mfc_init_mem_mgr[581] cma 0x5c100000 0x5f200000 0x3100000 0x3100000 1

[    1.589838] c0 mfc_init_mem_mgr[641]: base 0x5c100000, size 0x3100000, addr 0xdc100000

[    1.590252] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully

[    1.590901] c0 Samsung Graphics 2D driver, (c) 2011 Samsung Electronics

[    1.591285] c0 sii9234_cfg_gpio()

[    1.591320] c0 s5p_gpioint_set_type irq:405 is at GPF3(5)

[    1.591359] c0 sii9234_mhl_tx_i2c_probe(): wake lock is initialized.

[    1.591581] c0 s5p_gpioint_set_type irq:405 is at GPF3(5)

[    1.591699] c0 sii9234 : create mhl sysfile

[    1.592287] c0 input: sii9234_rcp as /devices/virtual/input/input3

[    1.593247] c0 max17047_fuelgauge_i2c_probe: fuelgauge init

[    1.594527] c0 max17047_get_soc: SOC(60, 5969 / 9821)

[    1.595817] c0 max17047_get_soc: SOC(60, 5969 / 9821)

[    1.595848] c0 max17047_fuelgauge_i2c_probe: rsoc=5998, fsoc=9850, soc=60

[    1.597828] c0 max17047_get_soc: SOC(60, 5969 / 9821)

[    1.599887] c0 max17047_get_soc: SOC(60, 5969 / 9821)

[    1.601500] c0 max17047_set_salrt: min(1%), max(255%)

[    1.602638] c0 max17047_set_talrt: min(0x80), max(0x7f)

[    1.603775] c0 max17047_set_valrt: min(0mV), max(5100mV)

[    1.606187] c0 wake enabled for irq 371

[    1.606212] c0 max17047_test_read

[    1.606238] c0 max17047_test_read: 1/1/1970 00:00

[    1.675581] c0     0    1    2    3    4    5    6    7    8    9    a    b    c    d    e    f

[    1.675634] c0 00| 0000 ff00 7f80 ff01 0000 0506 4044 6400 1600 c648 fffc fffd 0014 3bf6 3b98 04b0 

[    1.675678] c0 10| 07d0 ffff 1e2f 4600 0290 0148 1600 0003 07d0 c316 1616 c6bf 00ff 2314 03c0 049c 

[    1.675721] c0 20| 4d78 00ac 1e00 07d0 1400 2305 1600 7fd2 0700 4ea4 203b 0003 e3e1 290e 0000 0000 

[    1.675764] c0 30| c326 c306 1306 0800 0100 07d2 0780 05e0 0065 0930 9c5c 7fff 1680 5400 1086 e000 

[    1.675807] c0 40| f800 0000 0c00 0000 c378 007d 0c80 0000 3bfc 999e 04b0 9f00 ffff ffff d19e 6133 

[    1.675851] c0 e0| 0ca7 0b93 0001 167d 0003 0006 fe04 ffff 4c20 fffc 4c50 0000 4000 0000 c340 0910 

[    1.675894] c0 f0| 0000 0000 0000 0000 0000 0000 3bf6 0813 3fe9 535d fffe c344 0064 3910 c648 3bfc 

[    1.675945] c0 max17047_fuelgauge_i2c_probe: probe complete

[    1.676243] c0 max77693_charger_probe: charger init

[    1.679846] c0 max77693_charger_reg_init: battery cv voltage 4.35V, (sysrev 12)

[    1.680272] c0 max77693_dump_reg

[    1.680788] c0 max77693: c: 0xb0(0x5d)

[    1.681306] c0 max77693: c: 0xb1(0xff)

[    1.681822] c0 max77693: c: 0xb2(0x5d)

[    1.682338] c0 max77693: c: 0xb3(0x60)

[    1.682855] c0 max77693: c: 0xb4(0x31)

[    1.683372] c0 max77693: c: 0xb5(0x00)

[    1.683888] c0 max77693: c: 0xb6(0xb6)

[    1.684404] c0 max77693: c: 0xb7(0x05)

[    1.684921] c0 max77693: c: 0xb8(0x34)

[    1.685453] c0 max77693: c: 0xb9(0x80)

[    1.685970] c0 max77693: c: 0xba(0x00)

[    1.686486] c0 max77693: c: 0xbb(0xdd)

[    1.687002] c0 max77693: c: 0xbc(0xd6)

[    1.687519] c0 max77693: c: 0xbd(0x0c)

[    1.688036] c0 max77693: c: 0xbe(0x40)

[    1.688551] c0 max77693: c: 0xbf(0xbf)

[    1.689067] c0 max77693: c: 0xc0(0x17)

[    1.689584] c0 max77693: c: 0xc1(0xc1)

[    1.690118] c0 max77693: c: 0xc2(0x00)

[    1.690636] c0 max77693: c: 0xc3(0x07)

[    1.691152] c0 max77693: c: 0xc4(0xc4)

[    1.691669] c0 max77693: c: 0xc5(0x00)

[    1.715194] c1 max77693_charger_probe: support wc power detection

[    1.715437] c1 max77693_charger_probe: wpc deactive, set V_BUS_INT as PD

[    1.715478] c1 max77693_charger_probe: wpc(0), vbus(1)

[    1.715507] c1 max77693_charger_probe: probe complete

[    1.716829] c1 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com

[    1.717145] c1 Bluetooth: HCI UART driver ver 2.2

[    1.717176] c1 Bluetooth: HCI H4 protocol initialized

[    1.717909] c1 cpuidle: using governor ladder

[    1.719209] c1 cpuidle: using governor menu

[    1.719371] c1 mshci: Mobile Storage Host Controller Interface driver

[    1.719407] c1 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd

[    1.719600] c1 dw_mmc dw_mmc: clock source 0: sclk_dwmci (40000000 Hz)

[    1.719879] c1 mmc0: Version ID 0x5342240a.

[    1.722849] c1 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ###########

[    1.724337] c1 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA

[    1.724615] c1 sdhci: Secure Digital Host Controller Interface driver

[    1.724651] c1 sdhci: Copyright(c) Pierre Ossman

[    1.724796] c1 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (88888888 Hz)

[    1.725075] c1 mmc1: vtf_2.8v regulator found

[    1.750832] c0 mmc0: cmd 52 response timeout error

[    1.754979] c0 mmc0: cmd 52 response timeout error

[    1.762954] c0 mmc0: cmd 8 response timeout error

[    1.767020] c0 mmc0: cmd 5 response timeout error

[    1.771692] c0 mmc0: cmd 5 response timeout error

[    1.776379] c0 mmc0: cmd 5 response timeout error

[    1.781064] c0 mmc0: cmd 5 response timeout error

[    1.785759] c0 mmc0: cmd 55 response timeout error

[    1.790530] c0 mmc0: cmd 55 response timeout error

[    1.795308] c0 mmc0: cmd 55 response timeout error

[    1.800078] c0 mmc0: cmd 55 response timeout error

[    1.836772] c0 mmc0: 016G92: 11010030313647393230158f0c5c802d

[    1.849419] c0 mmc0: Voltage range not supported for power class.

[    1.849455] c0 mmc0: power class selection to bus width 8 failed

[    1.854181] c0 mmc0: Voltage range not supported for power class.

[    1.854218] c0 mmc0: power class selection to bus width 8 ddr 2 failed

[    1.860674] c0 mmc0: new high speed DDR MMC card at address 0001

[    1.861142] c0 mmcblk0: mmc0:0001 016G92 14.6 GiB 

[    1.865461] c0  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12

[    1.872809] c1 Registered led device: mmc1::

[    1.873220] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA

[    1.873471] c0 wake enabled for irq 380

[    1.873497] c0 mmc1: card inserted.

[    1.873621] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)

[    1.873716] c0 mmc2: no vmmc regulator found

[    1.876737] c0 Registered led device: mmc2::

[    1.876979] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA

[    1.877239] c0 aat1290a_led_probe : Probe

[    1.884454] c0 Registered led device: led_r

[    1.888174] c0 Registered led device: led_g

[    1.891873] c0 Registered led device: led_b

[    1.900003] c0 usbcore: registered new interface driver usbhid

[    1.900060] c0 usbhid: USB HID core driver

[    1.900361] c0 mmc1: cmd 52 command timeout error

[    1.900654] c0 logger: created 2048K log 'log_main'

[    1.900722] c0 mmc1: cmd 52 command timeout error

[    1.900962] c0 logger: created 256K log 'log_events'

[    1.901164] c0 logger: created 1024K log 'log_radio'

[    1.901374] c0 logger: created 256K log 'log_system'

[    1.901587] c0 logger: created 256K log 'log_sf'

[    1.901620] c0 sec_getlog_supply_loggerinfo: 0xc0c3ddf4 0xc0b3ddf4 0xc0afddf4 0xc0abddf4

[    1.904360] c0 [VIB] timed_output device is registrated

[    1.908146] c0 mmc1: cmd 5 command timeout error

[    1.908397] c0 lsm330dlc_accel_probe: is started

[    1.908480] c0 mmc1: cmd 5 command timeout error

[    1.908817] c0 mmc1: cmd 5 command timeout error

[    1.908870] c0 input: accelerometer_sensor as /devices/virtual/input/input4

[    1.909156] c0 mmc1: cmd 5 command timeout error

[    1.913530] c0 Registered sensors device: accelerometer_sensor

[    1.913575] c0 lsm330dlc_accel_probe: successful, position = 2

[    1.913808] c0 lsm330dlc_gyro_probe, started

[    1.914245] c0 input: gyro_sensor as /devices/virtual/input/input5

[    1.914687] c0 Registered sensors device: gyro_sensor

[    1.914737] c0 lsm330dlc_gyro_probe, position = 2

[    1.914768] c0 lsm330dlc_gyro_probe, successful

[    1.914966] c0 akm8975_probe is called.

[    1.915248] c0 s5p_gpioint_set_type irq:399 is at GPJ0(7)

[    1.916139] c0 akm8975_probe: asa_x = 159, asa_y = 158, asa_z = 169

[    1.916511] c0 Registered sensors device: magnetic_sensor

[    1.916553] c0 akm8975_probe is successful.

[    1.916747] c0 cm36651_i2c_probe is called.

[    1.916777] c0 proximity_leda_on, onoff = 1

[    1.995174] c0 cm36651_setup_reg: initial proximity value = 1

[    1.999867] c0 cm36651_setup_reg is success.

[    1.999894] c0 proximity_leda_on, onoff = 0

[    2.000240] c0 input: proximity_sensor as /devices/virtual/input/input6

[    2.000682] c0 cm36651_setup_irq, success

[    2.003813] c0 input: light_sensor as /devices/virtual/input/input7

[    2.004277] c0 Registered sensors device: proximity_sensor

[    2.004482] c0 Registered sensors device: light_sensor

[    2.004523] c0 cm36651_i2c_probe is success.

[    2.004739] c0 lps331ap: probe start.

[    2.005236] c0 lps331ap I2C driver registered!

[    2.008202] c0 input: barometer_sensor as /devices/virtual/input/input8

[    2.010750] c0 Registered sensors device: barometer_sensor

[    2.010797] c0 lps331ap 11-005d: lps331ap: probed

[    2.010952] c0 i2c-core: driver [lps331ap] using legacy suspend method

[    2.010988] c0 i2c-core: driver [lps331ap] using legacy resume method

[    2.011485] c0 i2c-core: driver [Si47xx] using legacy suspend method

[    2.011521] c0 i2c-core: driver [Si47xx] using legacy resume method

[    2.011987] c0 usbcore: registered new interface driver snd-usb-audio

[    2.013671] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics

[    2.013819] c0 audss_init: RCLK SRC[busclk]

[    2.013933] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]

[    2.014635] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]

[    2.014679] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]

[    2.014717] c0 i2s_txctrl: Turn Off - spr is no active

[    2.014762] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]

[    2.014798] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]

[    2.067456] c0 wm8994-codec wm8994-codec: write 60 = 100

[    2.068727] c0 wm8994-codec wm8994-codec: write 15 = 40

[    2.068953] c0 wm8994-codec wm8994-codec: write 102 = 3

[    2.069177] c0 wm8994-codec wm8994-codec: write 56 = c07

[    2.069402] c0 wm8994-codec wm8994-codec: write 5d = 7e

[    2.069625] c0 wm8994-codec wm8994-codec: write 5e = 0

[    2.069848] c0 wm8994-codec wm8994-codec: write 102 = 0

[    2.070075] c0 wm8994-codec wm8994-codec: write 38 = 30

[    2.070290] c0 wm8994-codec wm8994-codec: write 402 = 1c0

[    2.070504] c0 wm8994-codec wm8994-codec: write 403 = 1c0

[    2.070718] c0 wm8994-codec wm8994-codec: write 406 = 1c0

[    2.070928] c0 wm8994-codec wm8994-codec: write 407 = 1c0

[    2.071143] c0 wm8994-codec wm8994-codec: write 502 = 1c0

[    2.071356] c0 wm8994-codec wm8994-codec: write 503 = 1c0

[    2.071570] c0 wm8994-codec wm8994-codec: write 400 = 1c0

[    2.071783] c0 wm8994-codec wm8994-codec: write 401 = 1c0

[    2.071997] c0 wm8994-codec wm8994-codec: write 404 = 1c0

[    2.072210] c0 wm8994-codec wm8994-codec: write 405 = 1c0

[    2.072456] c0 wm8994-codec wm8994-codec: write 500 = 1c0

[    2.072671] c0 wm8994-codec wm8994-codec: write 501 = 1c0

[    2.072885] c0 wm8994-codec wm8994-codec: write 610 = 3c0

[    2.073099] c0 wm8994-codec wm8994-codec: write 611 = 3c0

[    2.073312] c0 wm8994-codec wm8994-codec: write 612 = 3c0

[    2.073525] c0 wm8994-codec wm8994-codec: write 613 = 3c0

[    2.073739] c0 wm8994-codec wm8994-codec: write 421 = 210

[    2.073952] c0 wm8994-codec wm8994-codec: write 423 = 210

[    2.074173] c0 wm8994-codec wm8994-codec: write 521 = 210

[    2.074397] c0 wm8994-codec wm8994-codec: write 34 = 10

[    2.074611] c0 wm8994-codec wm8994-codec: write 35 = 10

[    2.074824] c0 wm8994-codec wm8994-codec: write 38 = b0

[    2.075054] c0 wm8994-codec wm8994-codec: write 37 = 80

[    2.075291] c0 wm8994-codec wm8994-codec: write 440 = 9b

[    2.075514] c0 wm8994-codec wm8994-codec: write 441 = 844

[    2.075736] c0 wm8994-codec wm8994-codec: write 442 = e8

[    2.075958] c0 wm8994-codec wm8994-codec: write 443 = 210

[    2.076181] c0 wm8994-codec wm8994-codec: write 440 = 98

[    2.076404] c0 wm8994-codec wm8994-codec: write 450 = 9b

[    2.076625] c0 wm8994-codec wm8994-codec: write 451 = 844

[    2.076846] c0 wm8994-codec wm8994-codec: write 452 = e8

[    2.077069] c0 wm8994-codec wm8994-codec: write 453 = 210

[    2.077293] c0 wm8994-codec wm8994-codec: write 450 = 98

[    2.077525] c0 mmc1: new high speed SDHC card at address aaaa

[    2.077702] c0 wm8994-codec wm8994-codec: write 540 = 9b

[    2.077956] c0 wm8994-codec wm8994-codec: write 541 = 844

[    2.078018] c0 mmcblk1: mmc1:aaaa SL32G 28.7 GiB 

[    2.078564] c0 wm8994-codec wm8994-codec: write 542 = e8

[    2.078798] c0 wm8994-codec wm8994-codec: write 543 = 210

[    2.079021] c0 wm8994-codec wm8994-codec: write 540 = 98

[    2.079289] c0 wm8994-codec wm8994-codec: write 3d = 2f

[    2.079510] c0 wm8994-codec wm8994-codec: write 3e = 27

[    2.079731] c0 wm8994-codec wm8994-codec: write 18 = 18b

[    2.079952] c0 wm8994-codec wm8994-codec: write 1a = 18b

[    2.080171] c0 wm8994-codec wm8994-codec: write 19 = 18b

[    2.080392] c0 wm8994-codec wm8994-codec: write 1b = 18b

[    2.080613] c0 wm8994-codec wm8994-codec: write 26 = 179

[    2.080835] c0 wm8994-codec wm8994-codec: write 27 = 179

[    2.081057] c0 wm8994-codec wm8994-codec: write 1c = 1ed

[    2.081277] c0 wm8994-codec wm8994-codec: write 1d = 1ed

[    2.081498] c0 wm8994-codec wm8994-codec: write 20 = 1f9

[    2.081718] c0 wm8994-codec wm8994-codec: write 21 = 1f9

[    2.084394] c0 Sound: enabled mclk

[    2.084421] c0 pmu_debug: 0x00000900

[    2.094434] c0 Sound: state: 1, use_cnt: 1

[    2.094779] c0 wm8994-codec wm8994-codec: write 200 = 8

[    2.095032] c0 wm8994-codec wm8994-codec: write d0 = 100

[    2.095242] c0 wm8994-codec wm8994-codec: write 210 = 81

[    2.095464] c0 wm8994-codec wm8994-codec: write 211 = 81

[    2.095709] c0 wm8994-codec wm8994-codec: write d0 = 0

[    2.096140] c0 wm8994-codec wm8994-codec: wm1811: Rev C support mic detection

[    2.096278] c0 wm8994-codec wm8994-codec: write d1 = ff

[    2.096747] c0 wm8994-codec wm8994-codec: write 3b = 8

[    2.096968] c0 wm8994-codec wm8994-codec: write 39 = 180

[    2.097190] c0 wake enabled for irq 382

[    2.101190] c0 wm8994-codec wm8994-codec: write 2 = 2000

[    2.101420] c0 wm8994-codec wm8994-codec: write 4 = 300

[    2.101643] c0 wm8994-codec wm8994-codec: write 5 = 300

[    2.101866] c0 wm8994-codec wm8994-codec: write 208 = a

[    2.102098] c0 wm8994-codec wm8994-codec: write 200 = 9

[    2.102421] c0 asoc: wm8994-aif1 <-> samsung-i2s.4 mapping ok

[    2.102709] c0 wm8994-codec wm8994-codec: write 702 = 8101

[    2.103175] c0 wm8994-codec wm8994-codec: write 703 = 8101

[    2.103639] c0 wm8994-codec wm8994-codec: write 704 = 8101

[    2.104020] c0  mmcblk1: p1

[    2.105614] c0 asoc: wm8994-aif2 <-> midas.cp mapping ok

[    2.106649] c0 asoc: wm8994-aif3 <-> midas.bt mapping ok

[    2.106757] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]

[    2.106800] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]

[    2.106839] c0 i2s_txctrl: Turn Off - spr is no active

[    2.106890] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]

[    2.106926] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]

[    2.108142] c0 migrating range 722a0 722c0, retry (0)

[    2.119831] c0 migrating range 722c0 722e0, retry (0)

[    2.133561] c0 asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok

[    2.135875] c0 input: Midas_WM1811 Midas Jack as /devices/platform/soc-audio/sound/card0/input9

[    2.136379] c0 Samsung SRP driver, (c)2011 Samsung Electronics

[    2.137367] c0 ALSA device list:

[    2.137391] c0   #0: Midas_WM1811

[    2.137541] c0 GACT probability NOT on

[    2.137571] c0 Mirror/redirect action on

[    2.137596] c0 u32 classifier

[    2.137615] c0     Actions configured

[    2.137640] c0 Netfilter messages via NETLINK v0.30.

[    2.137718] c0 nf_conntrack version 0.5.0 (13241 buckets, 52964 max)

[    2.138864] c0 ctnetlink v0.93: registering with nfnetlink.

[    2.138926] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0

[    2.138965] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

[    2.139361] c0 xt_time: kernel timezone is -0000

[    2.140919] c0 ip_tables: (C) 2000-2006 Netfilter Core Team

[    2.141119] c0 arp_tables: (C) 2002 David S. Miller

[    2.141198] c0 TCP cubic registered

[    2.142255] c0 NET: Registered protocol family 10

[    2.145002] c0 Mobile IPv6

[    2.146130] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team

[    2.146417] c0 IPv6 over IPv4 tunneling driver

[    2.151197] c0 NET: Registered protocol family 17

[    2.151255] c0 NET: Registered protocol family 15

[    2.151407] c0 Bluetooth: RFCOMM TTY layer initialized

[    2.151450] c0 Bluetooth: RFCOMM socket layer initialized

[    2.151483] c0 Bluetooth: RFCOMM ver 1.11

[    2.151509] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[    2.151541] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[    2.151801] c0 NET: Registered protocol family 35

[    2.152192] c0 Registering the dns_resolver key type

[    2.152243] c0 EXYNOS4X12: Adaptive Support Voltage init

[    2.152276] c0 EXYNOS4X12(SG):  ORIG : 3 MOD : 0 RESULT : 3

[    2.152316] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

[    2.152382] c0 Registering SWP/SWPB emulation handler

[    2.152419] c0 Registering SDIV/UDIV emulation handler

[    2.152456] c0 DVFS : VDD_ARM Voltage table set with 3 Group

[    2.153183] c0 DVFS : VDD_INT Voltage table set with 3 Group

[    2.153879] c0 mif: set_hsic_lpa_states: 309: called(s5p_usb_phy_init+0x138/0x324): 

[    2.153931] c0 s5p-ehci s5p-ehci: usb phy usage(2)

[    2.154091] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1

[    2.154139] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3

[    2.154184] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller

[    2.154522] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1

[    2.154734] c0 migrating range 72284 72285, retry (0)

[    2.166482] c2 migrating range 72285 72286, retry (0)

[    2.176236] c2 migrating range 72286 72287, retry (0)

[    2.185829] c2 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000

[    2.195045] c2 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00

[    2.195145] c2 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    2.195193] c2 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.195234] c2 usb usb1: Product: S5P EHCI Host Controller

[    2.195269] c2 usb usb1: Manufacturer: Linux 3.0.101-replicant ehci_hcd

[    2.195310] c2 usb usb1: SerialNumber: s5p-ehci

[    2.195340] c2 call_battery_notify : VID : 0x1d6b, PID : 0x2 skipped.

[    2.196089] c2 hub 1-0:1.0: USB hub found

[    2.196129] c2 hub 1-0:1.0: 3 ports detected

[    2.196527] c2 CP not ready, Active State low

[    2.196932] c2 s5p-ohci s5p-ohci: usb phy usage(6)

[    2.196962] c2 s5p-ohci s5p-ohci: Already power on PHY

[    2.200669] c2 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1

[    2.200722] c2 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3

[    2.200762] c2 s5p-ohci s5p-ohci: s5p OHCI

[    2.201079] c2 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2

[    2.201237] c2 migrating range 72287 72288, retry (0)

[    2.210857] c0 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000

[    2.269099] c0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[    2.269143] c0 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.269188] c0 usb usb2: Product: s5p OHCI

[    2.269217] c0 usb usb2: Manufacturer: Linux 3.0.101-replicant ohci_hcd

[    2.269255] c0 usb usb2: SerialNumber: s5p-ohci

[    2.269283] c0 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.

[    2.269992] c0 hub 2-0:1.0: USB hub found

[    2.270059] c0 hub 2-0:1.0: 3 ports detected

[    2.270547] c0 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 8, 2nd_throttle = 14

[    2.270593] c0 s5p_tmu_probe: cpufreq_level[12], busfreq_value[133133]

[    2.270634] c0 @@@ get_refresh_interval = 0x2e

[    2.270663] c0 @@@ get_refresh_interval = 0x5d

[    2.270696] c0 ** temperature set value **

[    2.270718] c0 1st throttling stop_temp  = 78, start_temp     = 80

[    2.270751] c0 2nd throttling stop_temp  = 87, start_tmep     = 103

[    2.270786] c0 tripping temp             = 110, s/w emergency temp = 120

[    2.270819] c0 mem throttling stop_temp  = 80, start_temp     = 85

[    2.270857] c0 tc_voltage stop_temp = 13, start_temp = 10

[    2.273189] c0 mif: init_modem, system_rev = 12

[    2.273232] c0 mif: check phone active = 205

[    2.276065] c0 mif: umts_modem_cfg_gpio done

[    2.276097] c0 mif: modem_link_pm_config_gpio done

[    2.276398] c0 mif: modem_probe: modem_if

[    2.280923] c0 wake enabled for irq 366

[    2.280952] c0 mif: create_modemctl_device: xmm6262 is created!!!

[    2.281436] c0 wake enabled for irq 361

[    2.281721] c0 usbcore: registered new interface driver cdc_modem

[    2.281774] c0 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xebf0c000)

[    2.281817] c0 mif: hsic_create_link_device: usb : create_link_device DONE

[    2.281855] c0 mif: modem_probe: link created: usb

[    2.285622] c0 mif: create_io_device: Bood device = umts_boot0

[    2.295238] c0 mif: modem_probe: Complete!!!

[    2.296925] c0 regulator_init_complete: VCC_3.3V_LCD: incomplete constraints, leaving on

[    2.297981] c0 regulator regulator.4: func:max77693_reg_is_enabled

[    2.298023] c0 regulator regulator.4: func:max77693_get_rid

[    2.298060] c0 regulator regulator.4: func:max77693_get_enable_register

[    2.298597] c0 regulator_init_complete: CHARGER: incomplete constraints, leaving on

[    2.298643] c0 regulator regulator.3: func:max77693_reg_is_enabled

[    2.298683] c0 regulator regulator.3: func:max77693_get_rid

[    2.298716] c0 regulator regulator.3: func:max77693_get_enable_register

[    2.299249] c0 regulator regulator.2: func:max77693_reg_is_enabled

[    2.299289] c0 regulator regulator.2: func:max77693_get_rid

[    2.299324] c0 regulator regulator.2: func:max77693_get_enable_register

[    2.299855] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on

[    2.299961] c0 [TouchKey] i2c_touchkey_probe

[    2.300303] c0 input: sec_touchkey as /devices/platform/i2c-gpio.8/i2c-8/8-0020/input/input10

[    2.300583] c0 s5p_gpioint_set_type irq:395 is at GPJ0(3)

[    2.355333] c0 [TouchKey] OLED_DET = 1

[    2.355442] c0 s5p_gpioint_set_type irq:395 is at GPJ0(3)

[    2.356275] c2 [Touchkey] keycode_type err

[    2.357077] c2 touchkey_firmware_update F/W version: 0x6, Module version:0x5

[    2.362694] c2 [TouchKey] firmware auto update do not excute

[    2.362732] c2 [TouchKey] firmware_ver(banary=6, current=6)

[    2.362769] c2 [TouchKey] module_ver(banary=5, current=5)

[    2.363676] c2 [TouchKey] data[0]=8 data[1]=6 data[2]=5 data[3]=0

[    2.466140] c2 [Touchkey] autocal Enabled

[    2.490404] c0 max77686_rtc_read_time: 117/7/30 21:6:48(3)

[    2.490468] c0 max77686-rtc max77686-rtc: setting system clock to 2017-08-30 21:06:48 UTC (1504127208)

[    2.490628] c0 ctrl->mem.size = 0x3d00000

[    2.490656] c0 ctrl->mem.base = 0x6c300000

[    2.491193] c0 FIMC0 registered successfully

[    2.491339] c0 ctrl->mem.size = 0xf00000

[    2.491363] c0 ctrl->mem.base = 0x0

[    2.491684] c0 FIMC1 registered successfully

[    2.491818] c0 ctrl->mem.size = 0x0

[    2.491843] c0 ctrl->mem.base = 0x0

[    2.492155] c0 FIMC2 registered successfully

[    2.492297] c0 ctrl->mem.size = 0x0

[    2.492320] c0 ctrl->mem.base = 0xffffffea

[    2.492636] c0 FIMC3 registered successfully

[    2.492961] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics

[    2.517522] c0 samsung_battery_probe: battery init

[    2.517556] c0 samsung_battery_probe: Charger name: max77693-charger

[    2.517592] c0 samsung_battery_probe: Fuelgauge name: max17047-fuelgauge

[    2.517638] c0 samsung_battery_probe: Temperature source: ap adc

[    2.517676] c0 samsung_battery_probe: VF detect source: charger irq

[    2.517710] c0 samsung_battery_probe: Recharge voltage: 4300000

[    2.517744] c0 samsung_battery_probe: not applied CTIA spec

[    2.518283] c0 samsung_battery_probe: boot with charging, s(1)

[    2.519199] c0 samsung_battery_probe: do not support battery gpio detect

[    2.519264] c0 battery_create_attrs

[    2.520135] c2 battery_create_attrs: factory attrs created

[    2.520174] c2 battery_create_attrs: not support CTIA spec

[    2.520209] c2 samsung_battery_probe: probe complete

[    2.521503] c2 Freeing init memory: 232K

[    2.523734] c3 init: init started!

[    2.528612] c0 max17047_get_soc: SOC(60, 5969 / 9821)

[    2.528978] c3 SELinux: 2048 avtab hash slots, 5375 rules.

[    2.531869] c3 SELinux: 2048 avtab hash slots, 5375 rules.

[    2.531915] c3 SELinux:  1 users, 2 roles, 577 types, 0 bools, 1 sens, 1024 cats

[    2.531965] c3 SELinux:  87 classes, 5375 rules

[    2.532146] c0 battery_interval_calulation: now in booting, set 1s

[    2.532200] c0 [1] bat: s(60, 5998), v(3920, 15), t(28.9), cs(1, 1), cb(3), cr(466, 460), t(1)

[    2.533603] c3 SELinux:  Completing initialization.

[    2.533634] c3 SELinux:  Setting up existing superblocks.

[    2.533682] c3 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

[    2.533736] c3 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts

[    2.533832] c3 SELinux: initialized (dev bdev, type bdev), not configured for labeling

[    2.533887] c3 SELinux: initialized (dev proc, type proc), uses genfs_contexts

[    2.533947] c3 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[    2.534009] c3 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts

[    2.534572] c3 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs

[    2.534621] c3 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs

[    2.534666] c3 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling

[    2.534724] c3 SELinux: initialized (dev devpts, type devpts), uses transition SIDs

[    2.534783] c3 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts

[    2.534893] c3 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[    2.534956] c3 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

[    2.780930] c3 type=1403 audit(1504127208.785:2): policy loaded auid=4294967295 ses=4294967295

[    2.781455] c3 type=1404 audit(1504127208.785:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295

[    2.945248] c3 init: (Initializing SELinux enforcing took 0.42s.)

[    2.955565] c0 init: init second stage started!

[    3.019630] c0 init: waitpid failed: No child processes

[    3.024021] c0 init: (Loading properties from /default.prop took 0.00s.)

[    3.026735] c0 init: (Parsing /init.environ.rc took 0.00s.)

[    3.027220] c0 init: (Parsing /init.usb.rc took 0.00s.)

[    3.028905] c0 init: (Parsing /init.target.rc took 0.00s.)

[    3.029303] c0 init: (Parsing /init.smdk4x12.usb.rc took 0.00s.)

[    3.029358] c0 init: (Parsing /init.smdk4x12.rc took 0.00s.)

[    3.030122] c0 init: (Parsing /init.usb.configfs.rc took 0.00s.)

[    3.030261] c0 init: (Parsing /init.zygote32.rc took 0.00s.)

[    3.030453] c0 init: (Parsing /init.trace.rc took 0.00s.)

[    3.031160] c0 init: (Parsing /init.cm.rc took 0.00s.)

[    3.031212] c0 init: (Parsing /init.rc took 0.01s.)

[    3.031605] c0 init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.

[    3.040154] c0 init: Starting service 'ueventd'...

[    3.040795] c0 init: Waiting for /dev/.coldboot_done...

[    3.042425] c2 ueventd: ueventd started!

[    3.043354] c2 ueventd: invalid gid 'm2m'

[    3.045947] c2 ueventd: invalid gid 'm2m'

[    3.049913] c2 ueventd: invalid gid 'm2m'

[    3.170979] c1 max17047_get_soc: SOC(60, 5969 / 9821)

[    3.270098] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0

[    3.270384] c0 exynos4_handler_tmu_state: inform to init state to platform.

[    3.512350] c3 ueventd: Coldboot took 0.45s.

[    3.515927] c0 init: Waiting for /dev/.coldboot_done took 0.48s.

[    3.516111] c0 init: /dev/hw_random not found

[    3.519174] c0 keychord: using input dev max77693-muic for fevent

[    3.519243] c0 keychord: using input dev gpio-keys for fevent

[    3.519306] c0 keychord: using input dev sii9234_rcp for fevent

[    3.519372] c0 keychord: using input dev Midas_WM1811 Midas Jack for fevent

[    3.545272] c1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[    3.545955] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[    3.549574] c0 max17047_get_soc: SOC(60, 5969 / 9821)

[    3.552048] c0 battery_interval_calulation: now in booting, set 1s

[    3.552151] c0 [2] bat: s(60, 0), v(3956, 51), t(30.0), cs(1, 1), cb(3), cr(466, 460), t(2)

[    3.585319] c1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[    3.587489] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[    3.592361] c1 init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory

[    3.593265] c1 init: write_file: Unable to open '/proc/sys/net/ipv4/fwmark_reflect': No such file or directory

[    3.593478] c1 init: write_file: Unable to open '/proc/sys/net/ipv6/fwmark_reflect': No such file or directory

[    3.593668] c1 init: write_file: Unable to open '/proc/sys/net/ipv4/tcp_fwmark_accept': No such file or directory

[    3.665239] c1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[    3.665548] c1 init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument

[    3.669473] c1 init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory

[    3.673048] c1 init: /dev/hw_random not found

[    3.678776] c2 fs_mgr: Warning: unknown flag noemulatesd

[    3.692061] c2 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic

[    3.692226] c2 SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr

[    3.692491] c2 fs_mgr: __mount(source=/dev/block/mmcblk0p3,target=/efs,type=ext4)=0

[    3.699881] c2 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)

[    3.700006] c2 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr

[    3.700230] c2 fs_mgr: __mount(source=/dev/block/mmcblk0p9,target=/system,type=ext4)=0

[    3.701181] c2 F2FS-fs (mmcblk0p8): Magic Mismatch, valid(0xf2f52010) - read(0x10000)

[    3.701276] c2 F2FS-fs (mmcblk0p8): Can't find valid F2FS filesystem in 1th superblock

[    3.708328] c2 F2FS-fs (mmcblk0p8): Magic Mismatch, valid(0xf2f52010) - read(0x0)

[    3.708421] c2 F2FS-fs (mmcblk0p8): Can't find valid F2FS filesystem in 2th superblock

[    3.770111] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p8,target=/cache,type=f2fs)=-1

[    3.778427] c1 EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic

[    3.778576] c1 SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr

[    3.778755] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p8,target=/cache,type=ext4)=0

[    3.778870] c1 fs_mgr: mount_with_alternatives(): Mounted /dev/block/mmcblk0p8 on /cache with fs_type=ext4 instead of f2fs

[    3.796350] c1 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: journal_async_commit

[    3.796485] c1 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr

[    3.796624] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p10,target=/preload,type=ext4)=0

[    3.805078] c1 F2FS-fs (mmcblk0p12): Magic Mismatch, valid(0xf2f52010) - read(0xb88c0)

[    3.805183] c1 F2FS-fs (mmcblk0p12): Can't find valid F2FS filesystem in 1th superblock

[    3.812278] c1 F2FS-fs (mmcblk0p12): Magic Mismatch, valid(0xf2f52010) - read(0x100000)

[    3.812370] c1 F2FS-fs (mmcblk0p12): Can't find valid F2FS filesystem in 2th superblock

[    3.875115] c3 fs_mgr: __mount(source=/dev/block/mmcblk0p12,target=/data,type=f2fs)=-1

[    3.886260] c3 EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro

[    3.886420] c3 SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr

[    3.886662] c3 fs_mgr: check_fs(): mount(/dev/block/mmcblk0p12,/data,ext4)=0: Success

[    3.940118] c3 fs_mgr: check_fs(): unmount(/data) succeeded

[    3.944224] c3 fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p12

[    4.111288] c3 e2fsck: e2fsck 1.42.9 (28-Dec-2013)

[    4.111349] c3 

[    4.111510] c3 e2fsck: /dev/block/mmcblk0p12: clean, 2040/755904 files, 207617/3022844 blocks

[    4.111610] c3 

[    4.116153] c3 EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,journal_async_commit,errors=panic

[    4.116327] c3 SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr

[    4.116555] c3 fs_mgr: __mount(source=/dev/block/mmcblk0p12,target=/data,type=ext4)=0

[    4.116678] c3 fs_mgr: mount_with_alternatives(): Mounted /dev/block/mmcblk0p12 on /data with fs_type=ext4 instead of f2fs

[    4.128075] c1 fs_mgr: Warning: unknown flag noemulatesd

[    4.134027] c1 zram0: detected capacity change from 0 to 419430400

[    4.208786] c1 Adding 409596k swap on /dev/block/zram0.  Priority:-1 extents:1 across:409596k SS

[    4.212579] c1 init: Starting service 'logd'...

[    4.220411] c0 max77693-muic max77693-muic: func:max77693_muic_init_detect

[    4.221142] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev CONTROL1:9

[    4.221942] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:-1 ret:0

[    4.222053] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x41

[    4.222175] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:1 vb:40 dxovp:0 cable_type:17

[    4.222299] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: ATTACHED

[    4.222399] c0 max77693-muic max77693-muic: func:max77693_muic_handle_attach st1:3f st2:41 cable_type:17

[    4.222526] c0 max77693-muic max77693-muic: func:max77693_muic_attach_usb_type adc:1f cable_type:17

[    4.222646] c0 max77693-muic max77693-muic: max77693_muic_attach_usb_type:USB

[    4.222743] c0 max77693-muic max77693-muic: func:max77693_muic_set_charging_type force_disable:0

[    4.222867] c0 max77693_muic_charger_cb: 1

[    4.222931] c0 melfas-ts 3-0048: melfas_ta_cb

[    4.222993] c0 melfas-ts 3-0048: TA connect!!!

[    4.223211] c0 max77693-muic max77693-muic: func:max77693_muic_set_usb_path path:0

[    4.223315] c0 MUIC safeout path=0

[    4.223408] c0 regulator regulator.2: func:max77693_reg_is_enabled

[    4.223496] c0 regulator regulator.2: func:max77693_get_rid

[    4.223573] c0 regulator regulator.2: func:max77693_get_enable_register

[    4.224242] c0 regulator regulator.3: func:max77693_reg_is_enabled

[    4.224333] c0 regulator regulator.3: func:max77693_get_rid

[    4.224409] c0 regulator regulator.3: func:max77693_get_enable_register

[    4.225109] c0 max77693-muic max77693-muic: max77693_muic_set_usb_path: AP_USB_MODE

[    4.225229] c0 max77693-muic max77693-muic: max77693_muic_set_usb_path: Set manual path

[    4.228112] c0 max77693-muic max77693-muic: max77693_muic_set_usb_path: CNTL1(0x09)

[    4.228812] c0 max77693-muic max77693-muic: max77693_muic_set_usb_path: CNTL2(0x3e)

[    4.260987] c1 init: (Loading properties from /system/build.prop took 0.02s.)

[    4.261230] c1 init: (Loading properties from /vendor/build.prop took 0.00s.)

[    4.262204] c1 init: (Loading properties from /factory/factory.prop took 0.00s.)

[    4.262692] c1 fs_mgr: Warning: unknown flag noemulatesd

[    4.270130] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0

[    4.270774] c0 normal: free cpufreq_limit & interrupt enable.

[    4.273077] c1 init: Starting service 'vold'...

[    4.277443] c1 init: Not bootcharting.

[    4.304448] c3 logd.auditd: start

[    4.304577] c3 logd.klogd: 4304515129

[    4.449818] c3 fs_mgr: Warning: unknown flag noemulatesd

[    4.559036] c1 init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...

[    4.569648] c0 max17047_get_soc: SOC(60, 5969 / 9821)

[    4.572264] c0 battery_interval_calulation: now in booting, set 1s

[    4.572379] c0 [3] bat: s(60, 0), v(3945, 40), t(30.6), cs(1, 1), cb(3), cr(466, 460), t(3)

[    4.587431] c1 init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 1917) exited with status 0

[    4.591365] c1 init: cannot find 'icd_check', disabling 'exec 1 (icd_check)'

[    4.604567] c1 mdnie mdnie: scenario_store :: value=0

[    4.604642] c1 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD

[    4.604808] c1 mdnie mdnie: mode_store :: value=0

[    4.604867] c1 mdnie mdnie: mode=0, scenario=0, outdoor=0, cabc=0, CYANOGENMOD

[    4.615825] c1 init: cannot find 'icd_check', disabling 'exec 2 (icd_check)'

[    4.635258] c1 init: write_file: Unable to open '/sys/class/sec/gps/GPS_PWR_EN/export': No such file or directory

[    4.635814] c1 init: SELinux: Could not get canonical path /sys/class/sec/gps/export restorecon: No such file or directory.

[    4.648595] c1 init: Starting service 'sysinit'...

[    4.650349] c1 init: (Loading properties from /data/local.prop took 0.00s.)

[    4.695475] c1 init: Starting service 'logd-reinit'...

[    4.698239] c2 failed to copy MFC F/W during init

[    4.698923] c1 init: Starting service 'healthd'...

[    4.699804] c1 init: Starting service 'lmkd'...

[    4.700868] c1 init: Starting service 'servicemanager'...

[    4.701002] c3 binder: 1966:1966 transaction failed 29189, size 0-0

[    4.701780] c1 init: Starting service 'surfaceflinger'...

[    4.702659] c1 init: property_set("ro.build.product", "smdk4x12") failed

[    4.702797] c2 type=1400 audit(1504127210.700:4): avc: denied { mounton } for pid=1 comm="init" path="/sys/kernel/debug" dev=debugfs ino=1 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=dir permissive=0

[    4.708311] c1 init: property_set("ro.product.device", "smdk4x12") failed

[    4.716460] c1 init: write_file: Unable to open '/sys/kernel/mm/ksm/deferred_timer': No such file or directory

[    4.719309] c1 init: SELinux: Could not get canonical path /sys/block/sda/queue/scheduler restorecon: No such file or directory.

[    4.726468] c0 logd.daemon: reinit

[    4.730215] c1 init: Service 'logd-reinit' (pid 1964) exited with status 0

[    4.730815] c1 init: SELinux: Could not get canonical path /sys/block/sde/queue/scheduler restorecon: No such file or directory.

[    4.741465] c1 init: SELinux: Could not get canonical path /sys/block/dm-0/queue/scheduler restorecon: No such file or directory.

[    4.754909] c1 init: write_file: Unable to open '/proc/sys/kernel/perf_event_paranoid': No such file or directory

[    4.755070] c1 init: Starting service 'console'...

[    4.757319] c1 init: Starting service 'netd'...

[    4.759058] c1 init: Starting service 'debuggerd'...

[    4.760979] c1 init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'

[    4.768322] c1 init: Starting service 'ril-daemon'...

[    4.771170] c1 init: Starting service 'drm'...

[    4.772354] c1 init: Starting service 'media'...

[    4.773424] c1 init: Starting service 'installd'...

[    4.774662] c1 init: Starting service 'keystore'...

[    4.776505] c1 init: Starting service 'zygote'...

[    4.778148] c1 init: Starting service 'gatekeeperd'...

[    4.789176] c1 init: Starting service 'perfprofd'...

[    4.790483] c1 init: Starting service 'macloader'...

[    4.791667] c1 init: Starting service 'bootsnd'...

[    4.793617] c1 init: Starting service 'su_daemon'...

[    4.794376] c1 usb: enable_store enabled=0, !dev->enabled=1

[    4.794417] c1 usb: usb_gadget_disconnect

[    4.794640] c1 usb: functions_store buff=mtp,adb

[    4.794678] c1 usb: android_enable_function name=mtp

[    4.794718] c1 usb: android_enable_function name=adb

[    4.794808] c1 usb: enable_store enabled=1, !dev->enabled=1

[    4.794857] c1 usb: enable_store vendor=4e8,product=6860,bcdDevice=226

[    4.794904] c1 ,Class=0,SubClass=0,Protocol=0

[    4.794937] c1 usb: enable_store next cmd : usb_add_config

[    4.795168] c1 init: Starting service 'adbd'...

[    4.804731] c3 adb_open

[    4.804774] c3 usb: android_bind_enabled_functions f:mtp

[    4.804824] c3 mtp_bind_config

[    4.804857] c3 usb: usb_string_id cdev(0xeb90f540)->next_string_id=1

[    4.804955] c3 usb: android_bind_enabled_functions f:adb

[    4.805000] c3 adb_bind_config

[    4.805814] c3 usb: usb_gadget_connect

[    5.033168] c1 init: Service 'sysinit' (pid 1961) exited with status 0

[    5.072020] c1 init: Service 'macloader' (pid 1987) exited with status 0

[    5.120535] c3 mif: misc_open: iod = umts_boot0

[    5.123629] c3 mif: usb_init_communication: 1976:rild

[    5.123982] c3 store_ehci_power: EHCI turns off

[    5.124031] c3 s5p-ehci s5p-ehci: remove, state 4

[    5.124122] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xb0/0x150

[    5.124189] c3 call_battery_notify : VID : 0x1d6b, PID : 0x2 skipped.

[    5.136516] c0 s3c-fimc3: FIMC3 1 opened.

[    5.140833] c1 init: Starting service 'bootanim'...

[    5.141663] c2 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]

[    5.141731] c2 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]

[    5.141918] c2 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]

[    5.141980] c2 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]

[    5.142157] c2 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]

[    5.142220] c2 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]

[    5.142347] c2 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params ++

[    5.142411] c2 wm8994-codec wm8994-codec: write 302 = 4000

[    5.142646] c2 wm8994-codec wm8994-codec: _wm8994_set_fll ++

[    5.142701] c2 wm8994-codec wm8994-codec: write 221 = 700

[    5.142938] c0 wm8994-codec wm8994-codec: write 222 = 86c2

[    5.143177] c0 wm8994-codec wm8994-codec: write 223 = e0

[    5.145544] c0 wm8994-codec wm8994-codec: write 224 = c88

[    5.145864] c0 wm8994-codec wm8994-codec: write 220 = 5

[    5.155176] c0 wm8994-codec wm8994-codec: _wm8994_set_fll --

[    5.155238] c0 wm8994-codec wm8994-codec: write 200 = 11

[    5.155487] c0 wm8994-codec wm8994-codec: write d0 = cc00

[    5.156049] c0 wm8994-codec wm8994-codec: write 210 = 83

[    5.156388] c0 wm8994-codec wm8994-codec: write 211 = 83

[    5.156910] c0 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params --

[    5.156984] c0 wm8994-codec wm8994-codec: write 300 = 4010

[    5.157197] c0 wm8994-codec wm8994-codec: write 303 = 70

[    5.157409] c0 wm8994-codec wm8994-codec: write 305 = 20

[    5.157870] c0 wm8994-codec wm8994-codec: write 210 = 73

[    5.157923] c3 s5p-ehci s5p-ehci: USB bus 1 deregistered

[    5.158327] c0 I:P:DmaAddr=@2058000 Total=14080 PrdSz=3520 #Prds=4 dma_area=0xf4270000

[    5.160975] c0 wm8994-codec wm8994-codec: write 420 = 0

[    5.161009] c3 s5p-ehci s5p-ehci: still being used(4)

[    5.161039] c3 CP not ready, Active State low

[    5.161477] c0 i2s_txctrl:Turn on

[    5.211312] c3 store_ohci_power: OHCI turns off

[    5.211353] c3 s5p-ohci s5p-ohci: host_phy_resume

[    5.235093] c3 s5p-ohci s5p-ohci: remove, state 4

[    5.235170] c3 usb usb2: USB disconnect, device number 1 by usb_remove_hcd+0xb0/0x150

[    5.235216] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.

[    5.270569] c1 s5p-ohci s5p-ohci: USB bus 2 deregistered

[    5.271417] c1 s5p-ohci s5p-ohci: usb host phy off

[    5.321659] c1 mif: xmm6262_on: 

[    5.530246] c1 store_ehci_power: EHCI turns on

[    5.530308] c1 mif: set_hsic_lpa_states: 309: called(s5p_usb_phy_init+0x138/0x324): 

[    5.530360] c1 [MODEM_IF]Slave Wake

[    5.530390] c1 mif: set hsic lpa phy init: slave wake-up (1)

[    5.530431] c1 s5p-ehci s5p-ehci: usb phy usage(2)

[    5.530634] c1 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1

[    5.530693] c1 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3

[    5.530740] c1 s5p-ehci s5p-ehci: S5P EHCI Host Controller

[    5.531738] c1 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1

[    5.532017] c1 migrating range 72284 72285, retry (0)

[    5.548517] c1 migrating range 72285 72286, retry (0)

[    5.562698] c1 migrating range 72286 72287, retry (0)

[    5.574321] c1 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000

[    5.580072] c1 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00

[    5.580167] c1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    5.580211] c1 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    5.580255] c1 usb usb1: Product: S5P EHCI Host Controller

[    5.580285] c1 usb usb1: Manufacturer: Linux 3.0.101-replicant ehci_hcd

[    5.580319] c1 usb usb1: SerialNumber: s5p-ehci

[    5.580345] c1 call_battery_notify : VID : 0x1d6b, PID : 0x2 skipped.

[    5.582805] c1 hub 1-0:1.0: USB hub found

[    5.582846] c1 hub 1-0:1.0: 3 ports detected

[    5.584502] c1 mif: Active States =1, s5p-ehci

[    5.589514] c0 max17047_get_soc: SOC(60, 5969 / 9821)

[    5.591920] c0 battery_interval_calulation: now in booting, set 1s

[    5.591971] c0 [4] bat: s(60, 0), v(3850, -54), t(29.5), cs(1, 1), cb(3), cr(466, 460), t(4)

[    5.593517] c3 s3c-fimc0: FIMC0 1 opened.

[    5.594198] c3 s5c73m3_probe

[    5.594623] c3 s5c73m3_power_on: in

[    5.594676] c3 failed open file. :: -13

[    5.597075] c3 s5c73m3 vddCore : 1150000

[    5.612200] c3 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON

[    5.620978] c3 s5c73m3_read_vdd_core: read_val 0x8aa

[    5.623350] c3 s5c73m3_set_vdd_core : 1100000

[    5.626538] c3 s5c73m3_init: vdd core value from OTP : 1.10V

[    5.626568] c3 s5c73m3_init: chip info from OTP : 0x6244, 0x7704, 0xa376

[    5.639002] c1 store_ohci_power: OHCI turns on

[    5.639042] c1 s5p-ohci s5p-ohci: usb phy usage(6)

[    5.639111] c1 s5p-ohci s5p-ohci: Already power on PHY

[    5.639730] c3 s5c73m3_get_sensor_fw_version: Sensor_version = BHFJ02, Sensor_Type = CML0801-M0

[    5.642383] c3 s5c73m3_get_af_cal_version: Cal_Device = 0xb0b0c94a, Cal_DLL = 0x4c499ef7

[    5.642866] c1 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1

[    5.642916] c1 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3

[    5.642953] c1 s5p-ohci s5p-ohci: s5p OHCI

[    5.655216] c1 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2

[    5.655346] c3 s5c73m3_check_fw_date: Sensor_date = FJ02, Phone_date = FJ02

[    5.655396] c3 , compare result = 0

[    5.655423] c3 s5c73m3_check_fw: Loading From FROM......

[    5.655627] c1 migrating range 72287 72288, retry (0)

[    5.666606] c1 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000

[    5.702150] c1 healthd: wakealarm_init: timerfd_create failed

[    5.709344] c1 healthd: battery [l=60 v=3850 t=29.5 h=2 st=2] c=0 chg=u 2017-08-30 21:06:51.712923086 UTC

[    5.724164] c1 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[    5.724201] c1 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    5.724239] c1 usb usb2: Product: s5p OHCI

[    5.724260] c1 usb usb2: Manufacturer: Linux 3.0.101-replicant ohci_hcd

[    5.724291] c1 usb usb2: SerialNumber: s5p-ohci

[    5.724314] c1 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.

[    5.727074] c1 hub 2-0:1.0: USB hub found

[    5.727122] c1 hub 2-0:1.0: 3 ports detected

[    5.780678] c1 mif: link_pm_ioctl: 6f33

[    5.830793] c1 mif: link_pm_ioctl: 6f33

[    5.880914] c1 mif: link_pm_ioctl: 6f33

[    5.890063] c2 usb 1-2: new high speed USB device number 2 using s5p-ehci

[    5.931031] c1 mif: link_pm_ioctl: 6f33

[    5.981167] c1 mif: link_pm_ioctl: 6f33

[    6.021532] c3 usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11

[    6.021588] c3 usb 1-2: New USB device found, idVendor=058b, idProduct=0041

[    6.021625] c3 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    6.021667] c3 call_battery_notify : VID : 0x58b, PID : 0x41 no action.

[    6.023396] c3 mif: if_usb_probe: usbdev = 0xebcbb400

[    6.023429] c3 mif: if_usb_set_pipe: set 0

[    6.023453] c3 mif: if_usb_probe: devdata usbdev = 0xebcbb400

[    6.023555] c3 mif: if_usb_probe: successfully done

[    6.031295] c1 mif: link_pm_ioctl: 6f33

[    6.063943] c0 s5c73m3_set_flash: E, value 1

[    6.069286] c0 s5c73m3_s_ctrl: id 37, value 90

[    6.069312] c0 s5c73m3_set_jpeg_quality: E, value 90

[    6.071334] c0 s5c73m3_s_ctrl: id 131, value 213911952

[    6.071387] c0 s5c73m3_s_ctrl: id 90, value 0

[    6.071415] c0 s5c73m3_set_zoom: E, value 0

[    6.073032] c0 s5c73m3_s_ctrl: id 70, value 1

[    6.073055] c0 s5c73m3_set_scene_mode: E, value 1

[    6.074619] c0 s5c73m3_s_ctrl: id 71, value 1

[    6.074643] c0 s5c73m3_set_flash: E, value 1

[    6.078850] c0 s5c73m3_s_ctrl: id 95, value 0

[    6.078886] c0 s5c73m3_s_ctrl: id 99, value 0

[    6.078911] c0 s5c73m3_set_af_mode: E, value 0

[    6.080822] c0 s5c73m3_s_ctrl: id 72, value 0

[    6.080846] c0 s5c73m3_set_exposure: E, value 0

[    6.082429] c0 s5c73m3_s_ctrl: id 105, value 0

[    6.084021] c0 s5c73m3_s_ctrl: id 73, value 1

[    6.084045] c0 s5c73m3_set_whitebalance: E, value 1

[    6.085781] c0 s5c73m3_s_ctrl: id 74, value 1

[    6.085807] c0 s5c73m3_set_effect: E, value 1

[    6.087531] c0 s5c73m3_s_ctrl: id 75, value 0

[    6.087560] c0 s5c73m3_set_iso: E, value 0

[    6.089219] c0 s5c73m3_s_ctrl: id 81, value 0

[    6.089245] c0 s5c73m3_set_antishake: E, value 0

[    6.096958] c0 s5c73m3_power_down: in

[    6.129539] c0 s3c_csis_power: vmipi_1.8v is on. so OFF

[    6.129704] c0 s3c_csis_power: vmipi_1.1v is on. so OFF

[    6.129730] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF

[    6.129767] c0 fimc_runtime_suspend_cap FIMC0

[    6.129789] c0 s3c-fimc0: fimc_runtime_suspend_cap: No capture device.

[    6.135115] c0 s3c-fimc0: FIMC0 0 released.

[    6.135937] c0 s3c-fimc0: FIMC0 1 opened.

[    6.136004] c0 flite_runtime_resume

[    6.136025] c0 flite_runtime_resume--

[    6.136463] c0 s5k6a3_power_on: in

[    6.136996] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON

[    6.138127] c0 fimc_is_s_power++ 1

[    6.138508] c0 FIMC_IS runtime resume

[    6.138566] c0 FIMC_IS runtime resume end

[    6.138587] c0 fimc_is_s_power --

[    6.140675] c0 exynos4-fimc-is exynos4-fimc-is: could not load firmware (err=-2)

[    6.147330] c0 fimc_is_load_fw:329: failed to fimc_is_request_firmware (-22)

[    6.147361] c0 

[    6.156361] c0 s3c-fimc0: FIMC-IS init load_fw failed

[    6.160535] c0 flite_runtime_suspend

[    6.160563] c0 flite_runtime_suspend--

[    6.160587] c0 s5k6a3_power_down: in

[    6.161690] c0 s3c_csis_power: vmipi_1.8v is on. so OFF

[    6.161864] c0 s3c_csis_power: vmipi_1.1v is on. so OFF

[    6.161893] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF

[    6.161925] c0 fimc_is_s_power++ 0

[    6.161942] c0 fimc_is_s_power sub ip power off ++

[    6.161965] c0 fimc_is_s_power Sub ip is alive

[    6.161989] c0 fimc_is_s_power Wait Sub ip power off

[    6.184978] c1 migrating range 72288 72289, retry (0)

[    6.211845] c0 migrating range 72289 7228a, retry (0)

[    6.236967] c1 migrating range 7228a 7228b, retry (0)

[    6.267182] c1 migrating range 7228b 7228c, retry (0)

[    6.293236] c1 migrating range 7228c 7228d, retry (0)

[    6.328092] c0 migrating range 7228d 7228e, retry (0)

[    6.346621] c1 migrating range 7228e 7228f, retry (0)

[    6.377797] c1 migrating range 7228f 72290, retry (0)

[    6.603999] c0 max17047_get_soc: SOC(60, 5969 / 9821)

[    6.606196] c0 battery_interval_calulation: now in booting, set 1s

[    6.606247] c0 [5] bat: s(60, 0), v(3871, -33), t(29.5), cs(1, 1), cb(3), cr(466, 460), t(5)

[    6.607746] c1 healthd: battery [l=60 v=3871 t=29.5 h=2 st=2] c=0 chg=u 2017-08-30 21:06:52.612139377 UTC

[    6.936198] c0 i2s_txctrl: Turn Off - spr is no active

[    6.936244] c0 wm8994-codec wm8994-codec: write 420 = 200

[    6.936440] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]

[    6.936472] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]

[    6.937218] c1 init: Service 'bootsnd' (pid 1988) exited with status 0

[    7.110951] c3 mif: usb_rx_complete: urb err status = -71

[    7.166628] c0 mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0

[    7.166680] c0 mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0

[    7.277334] c3 mif: link_pm_ioctl: 6f32

[    7.327466] c3 mif: link_pm_ioctl: 6f32

[    7.377593] c3 mif: link_pm_ioctl: 6f32

[    7.427730] c3 mif: link_pm_ioctl: 6f32

[    7.477865] c3 mif: link_pm_ioctl: 6f32

[    7.527993] c3 mif: link_pm_ioctl: 6f32

[    7.578120] c3 mif: link_pm_ioctl: 6f32

[    7.619683] c0 max17047_get_soc: SOC(60, 5969 / 9821)

[    7.622194] c0 battery_interval_calulation: v diff(16875), weight(120)

[    7.622234] c0 battery_interval_calulation: weight(120)

[    7.622268] c0 battery_monitor_interval: apply weight(120), 30 -> 36

[    7.622320] c0 [6] bat: s(60, 0), v(3888, -16), t(30.1), cs(1, 1), cb(3), cr(466, 460), t(6)

[    7.623841] c1 healthd: battery [l=60 v=3888 t=30.1 h=2 st=2] c=0 chg=u 2017-08-30 21:06:53.628237045 UTC

[    7.628273] c3 mif: link_pm_ioctl: 6f32

[    7.678421] c3 mif: link_pm_ioctl: 6f32

[    7.728562] c3 mif: link_pm_ioctl: 6f32

[    7.778731] c3 mif: link_pm_ioctl: 6f30

[    7.778860] c3 store_ehci_power: EHCI turns off

[    7.778892] c3 s5p-ehci s5p-ehci: remove, state 1

[    7.778952] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xb0/0x150

[    7.778994] c3 call_battery_notify : VID : 0x1d6b, PID : 0x2 skipped.

[    7.779034] c3 usb 1-2: USB disconnect, device number 2 by usb_disconnect+0xa0/0x15c

[    7.779076] c3 call_battery_notify : VID : 0x58b, PID : 0x41 set 1700mA.

[    7.779199] c3 mif: if_usb_disconnect: 

[    7.779229] c3 mif: if_usb_disconnect: put dev 0xebcbb400

[    7.780456] c3 mif: if_usb_disconnect: 

[    7.806452] c3 s5p-ehci s5p-ehci: USB bus 1 deregistered

[    7.806834] c3 s5p-ehci s5p-ehci: still being used(4)

[    7.806879] c3 mif: Active States =0, s5p-ehci

[    7.860143] c3 store_ohci_power: OHCI turns off

[    7.860177] c3 s5p-ohci s5p-ohci: remove, state 1

[    7.860235] c3 usb usb2: USB disconnect, device number 1 by usb_remove_hcd+0xb0/0x150

[    7.860275] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.

[    7.895671] c3 s5p-ohci s5p-ohci: USB bus 2 deregistered

[    7.895956] c3 s5p-ohci s5p-ohci: usb host phy off

[    7.946116] c3 mif: link_pm_ioctl: 6f31

[    7.946146] c3 mif: link_pm_ioctl: 6f32

[    7.996271] c3 mif: link_pm_ioctl: 6f32

[    8.046402] c3 mif: link_pm_ioctl: 6f32

[    8.096543] c3 mif: link_pm_ioctl: 6f32

[    8.096616] c3 mif: link_pm_ioctl: 6f30

[    8.096733] c3 store_ehci_power: EHCI turns on

[    8.096780] c3 mif: set_hsic_lpa_states: 309: called(s5p_usb_phy_init+0x138/0x324): 

[    8.096825] c3 mif: set hsic lpa phy init: slave wake-up (1)

[    8.096858] c3 s5p-ehci s5p-ehci: usb phy usage(2)

[    8.097049] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1

[    8.097093] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3

[    8.097126] c3 s5p-ehci s5p-ehci: S5P EHCI Host Controller

[    8.097533] c3 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1

[    8.097893] c3 migrating range 72284 72285, retry (0)

[    8.108882] c3 migrating range 72285 72286, retry (0)

[    8.118693] c3 migrating range 72286 72287, retry (0)

[    8.129017] c3 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000

[    8.135063] c3 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00

[    8.135160] c3 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    8.135200] c3 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    8.135239] c3 usb usb1: Product: S5P EHCI Host Controller

[    8.135269] c3 usb usb1: Manufacturer: Linux 3.0.101-replicant ehci_hcd

[    8.135309] c3 usb usb1: SerialNumber: s5p-ehci

[    8.135339] c3 call_battery_notify : VID : 0x1d6b, PID : 0x2 skipped.

[    8.137158] c3 hub 1-0:1.0: USB hub found

[    8.137190] c3 hub 1-0:1.0: 3 ports detected

[    8.137788] c3 mif: Active States =1, s5p-ehci

[    8.191751] c3 store_ohci_power: OHCI turns on

[    8.191800] c3 s5p-ohci s5p-ohci: usb phy usage(6)

[    8.191830] c3 s5p-ohci s5p-ohci: Already power on PHY

[    8.195567] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1

[    8.195623] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3

[    8.195669] c3 s5p-ohci s5p-ohci: s5p OHCI

[    8.196555] c3 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2

[    8.196870] c3 migrating range 72287 72288, retry (0)

[    8.207287] c3 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000

[    8.264125] c3 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[    8.264162] c3 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    8.264198] c3 usb usb2: Product: s5p OHCI

[    8.264220] c3 usb usb2: Manufacturer: Linux 3.0.101-replicant ohci_hcd

[    8.264252] c3 usb usb2: SerialNumber: s5p-ohci

[    8.264276] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.

[    8.266017] c3 hub 2-0:1.0: USB hub found

[    8.266053] c3 hub 2-0:1.0: 3 ports detected

[    8.316944] c3 mif: link_pm_ioctl: 6f31

[    8.316976] c3 mif: link_pm_ioctl: 6f33

[    8.367111] c3 mif: link_pm_ioctl: 6f33

[    8.417250] c3 mif: link_pm_ioctl: 6f33

[    8.445088] c3 usb 1-2: new high speed USB device number 2 using s5p-ehci

[    8.467388] c3 mif: link_pm_ioctl: 6f33

[    8.517539] c3 mif: link_pm_ioctl: 6f33

[    8.567671] c3 mif: link_pm_ioctl: 6f33

[    8.583976] c3 usb 1-2: New USB device found, idVendor=1519, idProduct=0020

[    8.584018] c3 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    8.584057] c3 usb 1-2: Product: HSIC Device

[    8.584081] c3 usb 1-2: Manufacturer: Comneon

[    8.584106] c3 usb 1-2: SerialNumber: 0123456789

[    8.584134] c3 call_battery_notify : VID : 0x1519, PID : 0x20 skipped.

[    8.609421] c2 mif: if_usb_probe: usbdev = 0xebfff400

[    8.609458] c2 mif: if_usb_set_pipe: set 0

[    8.609484] c2 mif: if_usb_probe: devdata usbdev = 0xebfff400

[    8.609635] c2 mif: if_usb_probe: successfully done

[    8.612126] c2 mif: if_usb_probe: usbdev = 0xebfff400

[    8.612161] c2 mif: if_usb_set_pipe: set 1

[    8.612185] c2 mif: if_usb_probe: devdata usbdev = 0xebfff400

[    8.612321] c2 mif: if_usb_probe: successfully done

[    8.614119] c3 mif: if_usb_probe: usbdev = 0xebfff400

[    8.614164] c3 mif: if_usb_set_pipe: set 2

[    8.614190] c3 mif: if_usb_probe: devdata usbdev = 0xebfff400

[    8.614306] c3 mif: if_usb_probe: successfully done

[    8.617003] c3 mif: if_usb_probe: usbdev = 0xebfff400

[    8.617041] c3 mif: if_usb_set_pipe: set 3

[    8.617071] c3 mif: if_usb_probe: devdata usbdev = 0xebfff400

[    8.617217] c3 mif: link_pm_change_modem_state: set modem state 4 by if_usb_probe+0x46c/0x4b4

[    8.624396] c3 mif: link_pm_ioctl: 6f33

[    8.624862] c3 mif: io_dev_modem_state_changed: xmm6262 state changed (BOOTING -> ONLINE)

[    8.632629] c3 mif: if_usb_probe: successfully done

[    8.674536] c3 mif: link_pm_ioctl: 6f33

[    8.998697] c3 mif: misc_release: iod = umts_boot0

[    9.002098] c3 mif: misc_open: iod = umts_ipc0

[    9.006694] c3 mif: usb_init_communication: 1976:rild

[    9.006726] c3 mif: start_ipc: send 'a'

[    9.010652] c3 mif: misc_open: iod = umts_rfs0

[    9.014802] c3 mif: IPC-RX(40): 7f 0a 00 00 07 00 ff ff 01 01 03 7e 7f 1a 00 00 ...

[    9.014939] c3 mif: usb_init_communication: 1976:rild

[    9.015131] c3 mif: IPC-RX(89): 7f 0b 00 00 08 00 ff ff 05 07 03 00 7e 7f 0c 00 ...

[    9.105075] c2 mif: link_pm_runtime_start: rpm_status: 0

[    9.105106] c2 mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci

[    9.160048] c0 fimc_is_s_power:412: fimc_is_s_power wait timeout

[    9.160075] c0 

[    9.170030] c1 Set low poweroff mode

[    9.170050] c1 fimc_is_s_power sub ip power off --

[    9.170073] c1 fimc_is_hw_a5_power++ 0 

[    9.170092] c1 fimc_is_hw_a5_power off 1. access PMUREG_ISP_ARM_OPTION

[    9.170121] c1 fimc_is_hw_a5_power off ?!?! Low power mode (Option 0)

[    9.170151] c1 fimc_is_hw_a5_power off 2. access PMUREG_ISP_ARM_CONFIGURATION

[    9.170182] c1 fimc_is_hw_a5_power off 3. check A5 power off status

[    9.170210] c1 fimc_is_hw_a5_power off 4. complete

[    9.170232] c1 fimc_is_hw_a5_power --

[    9.170249] c1 A5 power off

[    9.170268] c1 FIMC_IS runtime suspend

[    9.170288] c1 FIMC_IS runtime suspend end

[    9.170501] c1 fimc_is_s_power --

[    9.170524] c1 fimc_runtime_suspend_cap FIMC0

[    9.170546] c1 s3c-fimc0: fimc_runtime_suspend_cap: No capture device.

[    9.175838] c1 s3c-fimc0: FIMC0 0 released.

[    9.226742] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[    9.226806] c2 mif: link_pm_runtime_work: rpm_states=3

[    9.270802] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[    9.320083] c0 mif: usb_port_resume: 1283, 4

[    9.350115] c3 warning: `main' uses 32-bit capabilities (legacy support in use)

[    9.530949] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[    9.531052] c3 mif: link_pm_runtime_work: rpm_states=3

[    9.576712] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[    9.625127] c3 mif: usb_port_resume: 1283, 4

[    9.835072] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[    9.835126] c0 mif: link_pm_runtime_work: rpm_states=3

[    9.880795] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[    9.930077] c0 mif: usb_port_resume: 1283, 4

[   10.140028] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[   10.140117] c0 mif: link_pm_runtime_work: rpm_states=3

[   10.185799] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[   10.235053] c0 mif: usb_port_resume: 1283, 4

[   10.446535] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[   10.446658] c0 mif: link_pm_runtime_work: rpm_states=3

[   10.492124] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[   10.540076] c0 mif: usb_port_resume: 1283, 4

[   10.750095] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[   10.750151] c0 mif: link_pm_runtime_work: rpm_states=3

[   10.795767] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[   10.846905] c0 mif: usb_port_resume: 1283, 4

[   11.056679] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[   11.056754] c0 mif: link_pm_runtime_work: rpm_states=3

[   11.102810] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[   11.119132] c2 cpufreq_max_limit_store: Unlock request is ignored

[   11.123888] c2 cpufreq_min_limit_store: Unlock request is ignored

[   11.131056] c2 request_suspend_state: wakeup (3->0) at 11131033174 (2017-08-30 21:06:57.135478422 UTC)

[   11.150118] c0 mif: usb_port_resume: 1283, 4

[   11.213912] c0 lcd panel: brightness=102, bl=9, candela=102

[   11.360452] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[   11.360576] c0 mif: link_pm_runtime_work: rpm_states=3

[   11.405873] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[   11.455140] c0 mif: usb_port_resume: 1283, 4

[   11.776098] c3 s5p-ehci s5p-ehci: host_phy_susp

[   14.221079] c0 wm8994-codec wm8994-codec: write 311 = 0

[   14.221538] c0 wm8994-codec wm8994-codec: write 610 = 1c0

[   14.221853] c0 wm8994-codec wm8994-codec: write 611 = 1c0

[   14.222319] c0 wm8994-codec wm8994-codec: write 20 = 179

[   14.231308] c0 wm8994-codec wm8994-codec: write 21 = 179

[   14.231776] c0 wm8994-codec wm8994-codec: write 1c = 16d

[   14.232083] c0 wm8994-codec wm8994-codec: write 1d = 16d

[   14.235940] c2 wm8994-codec wm8994-codec: write 601 = 1

[   14.238344] c0 wm8994-codec wm8994-codec: write 602 = 1

[   14.238756] c0 wm8994-codec wm8994-codec: write 51 = 7

[   14.241167] c0 wm8994-codec wm8994-codec: write 604 = 10

[   14.248451] c0 wm8994-codec wm8994-codec: write 605 = 20

[   14.249001] c0 wm8994-codec wm8994-codec: write 603 = c

[   14.249389] c0 wm8994-codec wm8994-codec: write 603 = 18c

[   14.249759] c0 wm8994-codec wm8994-codec: write 612 = 1c0

[   14.250149] c0 wm8994-codec wm8994-codec: write 613 = 1c0

[   14.252592] c0 wm8994-codec wm8994-codec: write 36 = 2

[   14.259491] c0 wm8994-codec wm8994-codec: write 36 = 3

[   14.263301] c0 wm8994-codec wm8994-codec: write 24 = 19

[   14.265999] c0 wm8994-codec wm8994-codec: write 22 = 0

[   14.267047] c0 wm8994-codec wm8994-codec: write 23 = 0

[   14.269533] c0 wm8994-codec wm8994-codec: write 2d = 1

[   14.273357] c0 wm8994-codec wm8994-codec: write 2e = 1

[   14.277347] c0 wm8994-codec wm8994-codec: write 33 = 10

[   14.279737] c0 wm8994-codec wm8994-codec: write 33 = 18

[   14.280739] c0 wm8994-codec wm8994-codec: write 1f = 0

[   14.283090] c0 wm8994-codec wm8994-codec: write 35 = 30

[   14.285666] c0 wm8994-codec wm8994-codec: write 35 = 31

[   14.288216] c0 wm8994-codec wm8994-codec: write 34 = 30

[   14.290789] c0 wm8994-codec wm8994-codec: write 34 = 31

[   14.293182] c0 wm8994-codec wm8994-codec: write 606 = 2

[   14.295743] c0 wm8994-codec wm8994-codec: write 607 = 2

[   14.298377] c0 wm8994-codec wm8994-codec: write 28 = 20

[   14.301051] c0 wm8994-codec wm8994-codec: write 28 = 30

[   14.301508] c0 wm8994-codec wm8994-codec: write 29 = 10

[   14.301838] c0 wm8994-codec wm8994-codec: write 18 = 10b

[   14.304354] c0 wm8994-codec wm8994-codec: write 28 = 32

[   14.308425] c0 wm8994-codec wm8994-codec: write 28 = 33

[   14.308920] c0 wm8994-codec wm8994-codec: write 2a = 10

[   14.311807] c0 wm8994-codec wm8994-codec: write 1a = 10b

[   14.317860] c0 wm8994-codec wm8994-codec: write 28 = 3b

[   14.320600] c0 wm8994-codec wm8994-codec: write 28 = 3f

[   14.321067] c0 wm8994-codec wm8994-codec: write 2a = 90

[   14.321430] c0 wm8994-codec wm8994-codec: write 1b = 10b

[   14.324258] c0 wm8994-codec wm8994-codec: write 28 = bf

[   14.327736] c0 wm8994-codec wm8994-codec: write 28 = ff

[   14.328162] c0 wm8994-codec wm8994-codec: write 29 = 90

[   14.328464] c0 wm8994-codec wm8994-codec: write 19 = 10b

[   14.352748] c1 wm8994-codec wm8994-codec: write 6 = 8

[   14.385683] c1 wm8994-codec wm8994-codec: write 480 = 6319

[   14.386508] c0 wm8994-codec wm8994-codec: write 480 = 4b19

[   14.386803] c0 wm8994-codec wm8994-codec: write 480 = 49d9

[   14.387093] c0 wm8994-codec wm8994-codec: write 480 = 49d5

[   14.387386] c0 wm8994-codec wm8994-codec: write 481 = 6b00

[   14.393346] c0 wm8994-codec wm8994-codec: write 22 = 2

[   14.393654] c0 wm8994-codec wm8994-codec: write 23 = 2

[   14.393957] c0 wm8994-codec wm8994-codec: write 26 = 140