Replicant

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Linux version 3.0.101-replicant (wolfi@machinist) (gcc version 5.4.1 20160919 (15:5.4.1+svn241155-1) ) #1 SMP PREEMPT Sun Dec 10 13:01:42 UTC 2017

[    0.000000] CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c5387d

[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache

[    0.000000] Machine: OMAP4 Espresso board

[    0.000000] android_display: setting default resolution 1280*800, bpp=4

[    0.000000] android_display: tiler1d 32768000

[    0.000000] android_display: setting fb0.vram to 4096000

[    0.000000] android_display: setting vram to 4096000

[    0.000000] android_display: ion carveouts: 88342528 tiler2d, 13107200 nonsecure

[    0.000000] omap4_total_ram_size = 0x40000000

[    0.000000] omap4_smc_size = 0x300000

[    0.000000] omap4_ion_heap_secure_input_size = 0x0

[    0.000000] omap4_ion_heap_secure_output_wfdhdcp_size = 0x0

[    0.000000] omap4_ducati_heap_size = 0x4100000

[    0.000000] omap4_ion_heap_tiler_mem_size = 0x0

[    0.000000] omap4_ion_heap_nonsec_tiler_mem_size  = 0x0

[    0.000000]  omap4_smc_addr = 0xbfd00000

[    0.000000] omap4_ion_heap_secure_input_addr = 0xbfd00000

[    0.000000] omap4_ion_heap_secure_output_wfdhdcp_addr = 0xbfd00000

[    0.000000] omap4_ducati_heap_addr = 0xbae00000

[    0.000000] omap4_ion_heap_tiler_mem_addr = 0xbae00000

[    0.000000] omap4_ion_heap_nonsec_tiler_mem_addr  = 0xbae00000

[    0.000000] omap_ion_init: secure_input id=2 [bfd00000-bfd00000] size=0

[    0.000000] omap_ion_init: secure_output_wfdhdcp id=5 [bfd00000-bfd00000] size=0

[    0.000000] omap_ion_init: tiler id=1 [bae00000-bae00000] size=0

[    0.000000] omap_ion_init: nonsecure_tiler id=3 [bae00000-bae00000] size=0

[    0.000000] omap_ion_init: system id=0 [0-0] size=0

[    0.000000] omap_ion_init: tiler_reservation id=4 [0-0] size=0

[    0.000000] Reserving 16777216 bytes SDRAM for VRAM

[    0.000000] Memory policy: ECC disabled, Data cache writealloc

[    0.000000] OMAP4430 ES2.3

[    0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000

[    0.000000] On node 0 totalpages: 240128

[    0.000000] free_area_init_node: node 0, pgdat c0927b00, node_mem_map c09b2000

[    0.000000]   Normal zone: 1280 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 162048 pages, LIFO batch:31

[    0.000000]   HighMem zone: 768 pages used for memmap

[    0.000000]   HighMem zone: 76032 pages, LIFO batch:15

[    0.000000] PERCPU: Embedded 7 pages/cpu @c11bb000 s7456 r8192 d13024 u32768

[    0.000000] pcpu-alloc: s7456 r8192 d13024 u32768 alloc=8*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 238080

[    0.000000] Kernel command line: androidboot.hardware=espresso root=/dev/mmcblk0p1 rw rootdelay=2 init=/init vram=15M omapfb.vram=0:8M switch_sel=1 snd_soc_core_open.pmdown_time=1000 androidboot.emmc_checksum=3 sec_debug.enable=0 sec_debug.enable_user=0 androidboot.debug_level=0x4f4c androidboot.carrier=wifi-only mem=512M@0x80000000 mem=512M@0xa0000000 vmalloc=256m console=sec_log_buf loglevel=0 androidboot.mode=power_key bootmode=0 sec_log=2052K@0x9fdff000 sec_bootfb=8M@0xbef00000 lcd_panel_id=1 androidboot.serialno=c1607371c95e44f cordon=d6cfdf2fcb2e6bca02c66cf997481f38

[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] allocated 4194304 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] Memory: 512MB 412MB 14MB = 938MB total

[    0.000000] Memory: 936436k/936436k available, 112140k reserved, 307200K highmem

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)

[    0.000000]     vmalloc : 0xe8800000 - 0xf8000000   ( 248 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xe8000000   ( 640 MB)

[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

[    0.000000]       .init : 0xc0008000 - 0xc006a000   ( 392 kB)

[    0.000000]       .text : 0xc006a000 - 0xc08c1000   (8540 kB)

[    0.000000]       .data : 0xc08c2000 - 0xc0929d80   ( 416 kB)

[    0.000000]        .bss : 0xc0929e78 - 0xc09b1330   ( 542 kB)

[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[    0.000000] Preemptible hierarchical RCU implementation.

[    0.000000] NR_IRQS:396

[    0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.

[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz

[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms

[    0.000000] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744)

[    0.070404] pid_max: default: 32768 minimum: 301

[    0.070404] Security Framework initialized

[    0.070404] SELinux:  Initializing.

[    0.070404] SELinux:  Starting in permissive mode

[    0.070404] Mount-cache hash table entries: 512

[    0.070404] Initializing cgroup subsys debug

[    0.070404] Initializing cgroup subsys cpuacct

[    0.070404] Initializing cgroup subsys memory

[    0.071746] Initializing cgroup subsys freezer

[    0.071746] CPU: Testing write buffer coherency: ok

[    0.071746] ftrace: allocating 22878 entries in 68 pages

[    0.091552] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available

[    0.091674] L310 cache controller enabled

[    0.091705] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B

[    0.170166] CPU1: Booted secondary processor

[    0.240051] Brought up 2 CPUs

[    0.240051] SMP: Total of 2 processors activated (4022.78 BogoMIPS).

[    0.242797] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw

[    0.242858] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr

[    0.242858] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1

[    0.242858] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2

[    0.242889] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe

[    0.242889] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg

[    0.242889] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per

[    0.242919] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup

[    0.242919] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private

[    0.242950] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if

[    0.243011] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci

[    0.243011] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci

[    0.243255] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.

[    0.247863] _omap4_module_wait_ready: Timeout waiting for module enable (mcpdm_fck: clkctrl = 0x30002)

[    0.249969] omap_hwmod: mcpdm: cannot be enabled (3)

[    0.255004] print_constraints: dummy: 

[    0.255493] NET: Registered protocol family 16

[    0.255645] GPMC revision 6.0

[    0.256439] EMIF0 is enabled with IRQ142

[    0.256439] EMIF1 is enabled with IRQ143

[    0.256530] Last reset was cold reset (PRM_RSTST=0x1)

[    0.256530] 

[    0.256713] OMAP GPIO hardware version 0.1

[    0.257476] omap_mux_init: Add partition: #1: core, flags: 2

[    0.258453] omap_mux_init: Add partition: #2: wkup, flags: 2

[    0.263244] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

[    0.263305] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.

[    0.263305] hw-breakpoint: maximum watchpoint size is 4 bytes.

[    0.266601] HSI: device registered as omap_hwmod: hsi

[    0.266601] OMAP DMA hardware revision 0.0

[    0.266601] omap_rproc_get_pool: dsp - no carveout memory is available at all

[    0.267272] omap_rproc_get_pool: ipu - carveout memory is unavailable: 0x0, 0x0

[    0.273315] bio: create slab <bio-0> at 0

[    0.273498] print_constraints: VBATT: 1800 mV 

[    0.273712] print_constraints: vmmc: 2800 mV normal standby

[    0.273895] print_constraints: eMMC_LDO: 1800 mV 

[    0.274139] print_constraints: vwl1271: 2000 mV 

[    0.274139] i2c-core: driver [twl] using legacy suspend method

[    0.274597] i2c-core: driver [twl] using legacy resume method

[    0.274597] SCSI subsystem initialized

[    0.275634] usbcore: registered new interface driver usbfs

[    0.275726] usbcore: registered new interface driver hub

[    0.275817] usbcore: registered new device driver usb

[    0.276336] i2c-gpio i2c-gpio.6: using pins 66 (SDA) and 65 (SCL)

[    0.276336] i2c-gpio i2c-gpio.5: using pins 98 (SDA) and 99 (SCL)

[    0.276336] i2c-gpio i2c-gpio.7: using pins 62 (SDA) and 61 (SCL)

[    0.276794] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz

[    0.277191] Skipping twl internal clock init and using bootloader value (unknown osc rate)

[    0.279571] twl6030: PIH (irq 39) chaining IRQs 368..387

[    0.280456] print_constraints: LDOUSB: 3300 mV normal standby

[    0.281799] print_constraints: VANA: 2100 mV normal standby

[    0.282348] print_constraints: CLK32KG: 

[    0.282806] print_constraints: CLK32KAUDIO: 

[    0.283447] print_constraints: LDO5: 1800 mV normal standby

[    0.284057] print_constraints: LDO1: 2800 mV normal standby

[    0.284454] print_constraints: LDO7: 1000 <--> 3300 mV at 900 mV normal standby

[    0.284942] print_constraints: LDO6: 1800 mV normal standby

[    0.285339] print_constraints: LDOLN: 1000 <--> 3300 mV at 1800 mV normal standby

[    0.285614] print_constraints: LDO2: 1000 <--> 3300 mV at 1800 mV normal standby

[    0.286254] print_constraints: LDO4: 2800 mV normal standby

[    0.286956] print_constraints: LDO3: 3300 mV normal standby

[    0.287170] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz

[    0.287414] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz

[    0.287658] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz

[    0.287994] omap-rproc omap-rproc.0: dsp is available

[    0.288391] omap-rproc omap-rproc.1: ipu is available

[    0.288391] [SENSORS CORE] sensors_class_init

[    0.288452] Advanced Linux Sound Architecture Driver Version 1.0.24.

[    0.288452] Bluetooth: Core ver 2.16

[    0.289062] NET: Registered protocol family 31

[    0.289062] Bluetooth: HCI device and connection manager initialized

[    0.289093] Bluetooth: HCI socket layer initialized

[    0.289093] Bluetooth: L2CAP socket layer initialized

[    0.289123] Bluetooth: SCO socket layer initialized

[    0.289459] cfg80211: Calling CRDA to update world regulatory domain

[    0.290405] Switching to clocksource 32k_counter

[    0.294708] Switched to NOHz mode on CPU #0

[    0.294738] Switched to NOHz mode on CPU #1

[    0.298278] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)

[    0.307434] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)

[    0.307464] musb-hdrc: MHDRC RTL version 2.0 

[    0.307464] musb-hdrc: setup fifo_mode 4

[    0.307464] musb-hdrc: 28/31 max ep, 16384/16384 memory

[    0.307495] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124

[    0.307922] NET: Registered protocol family 2

[    0.307922] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.309143] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[    0.309143] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

[    0.311431] TCP: Hash tables configured (established 131072 bind 65536)

[    0.311431] TCP reno registered

[    0.311462] UDP hash table entries: 512 (order: 2, 16384 bytes)

[    0.311462] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[    0.311462] NET: Registered protocol family 1

[    0.312164] Trying to unpack rootfs image as initramfs...

[    0.357635] Freeing initrd memory: 968K

[    0.477844] omap_init_opp_table: no hwmod or odev for aess, [20] cannot add OPPs.

[    0.478179] omap_init_opp_table: no hwmod or odev for aess, [21] cannot add OPPs.

[    0.478240] ram_console: got buffer at a0000000, size 200000

[    0.478240] ram_console: uncorrectable error in header

[    0.478240] ram_console: no valid data in buffer (sig = 0x930e920d)

[    0.479583] console [ram-1] enabled

[    0.479583] omap-iommu omap-iommu.0: ducati registered

[    0.479583] omap-iommu omap-iommu.1: tesla registered

[    0.479583] audit: initializing netlink socket (disabled)

[    0.479583] type=2000 audit(0.460:1): initialized

[    0.500518] highmem bounce pool size: 64 pages

[    0.500518] ashmem: initialized

[    0.512603] fuse init (API version 7.16)

[    0.512603] SELinux:  Registering netfilter hooks

[    0.515289] io scheduler noop registered

[    0.515380] io scheduler deadline registered

[    0.515380] io scheduler cfq registered (default)

[    0.516326] OMAP DSS rev 4.0

[    0.520660] dsscomp: initializing.

[    0.520751] misc dsscomp: display0=ltn_panel

[    0.520751] misc dsscomp: found 1 displays and 4 overlays, WB overlay 1

[    0.521240] could not allocate slot

[    0.521850] omap-rproc omap-rproc.1: powering up ipu

[    0.522247] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully

[    0.522338] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully

[    0.523468] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! 

[    0.523468] OMAPRPC: debug=0

[    0.523986] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0

[    0.524322] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1

[    0.524993] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2

[    0.524993] ------------[ cut here ]------------

[    0.525177] WARNING: at /home/wolfi/replicant/6.0-romsrc-clean/kernel/samsung/espresso10/arch/arm/mach-omap2/omap_hwmod.c:1274 _enable+0x1bc/0x1dc()

[    0.525177] omap_hwmod: uart3: enabled state can only be entered from initialized, idle, or disabled state

[    0.525451] Modules linked in:

[    0.525726] Backtrace: 

[    0.525726] [<c0074ae0>] (dump_backtrace+0x0/0x114) from [<c0699bbc>] (dump_stack+0x20/0x24)

[    0.525726]  r7:000004fa r6:c080d94c r5:00000009 r4:e787dc10

[    0.526428] [<c0699b9c>] (dump_stack+0x0/0x24) from [<c00c5040>] (warn_slowpath_common+0x64/0x74)

[    0.526428] [<c00c4fdc>] (warn_slowpath_common+0x0/0x74) from [<c00c5090>] (warn_slowpath_fmt+0x40/0x48)

[    0.526428]  r9:e787c000 r8:c00e8cc8 r7:c08db598 r6:a0000093 r5:c08ea688

[    0.526428] r4:c080dbd0

[    0.526428] [<c00c5050>] (warn_slowpath_fmt+0x0/0x48) from [<c0083cac>] (_enable+0x1bc/0x1dc)

[    0.527374]  r3:c08173fc r2:c080dbd0

[    0.527374]  r4:c08ea63c

[    0.527374] [<c0083af0>] (_enable+0x0/0x1dc) from [<c00842f0>] (omap_hwmod_enable+0x34/0x54)

[    0.528015]  r7:c08db598 r6:a0000093 r5:c08ea688 r4:c08ea63c

[    0.528015] [<c00842bc>] (omap_hwmod_enable+0x0/0x54) from [<c0080c0c>] (uart_enable_hwmod+0x20/0x28)

[    0.528533]  r7:c08db598 r6:00000001 r5:3b9aca00 r4:e78eca00

[    0.528533] [<c0080bec>] (uart_enable_hwmod+0x0/0x28) from [<c00a1b10>] (_omap_device_activate+0x84/0x114)

[    0.528533] [<c00a1a8c>] (_omap_device_activate+0x0/0x114) from [<c00a2280>] (omap_device_enable+0x3c/0x98)

[    0.528533]  r7:c08f37b8 r6:00000004 r5:e78eca08 r4:e78eca00

[    0.528533] [<c00a2244>] (omap_device_enable+0x0/0x98) from [<c00a22fc>] (_od_runtime_resume+0x20/0x2c)

[    0.529754]  r4:e78eca08

[    0.529754] [<c00a22dc>] (_od_runtime_resume+0x0/0x2c) from [<c0351d80>] (rpm_callback+0x60/0x70)

[    0.530059]  r5:e78eca08 r4:c00a22dc

[    0.530059] [<c0351d20>] (rpm_callback+0x0/0x70) from [<c0352b38>] (rpm_resume+0x318/0x53c)

[    0.530426]  r7:c08f37b8 r6:00000004 r5:c08c4080 r4:e78eca08

[    0.530426] [<c0352820>] (rpm_resume+0x0/0x53c) from [<c0352db4>] (__pm_runtime_resume+0x58/0x70)

[    0.530426] [<c0352d5c>] (__pm_runtime_resume+0x0/0x70) from [<c033c674>] (serial_omap_pm+0x30/0x250)

[    0.530426]  r7:c0908570 r6:e7083000 r5:c08d0888 r4:e7090178

[    0.530426] [<c033c644>] (serial_omap_pm+0x0/0x250) from [<c033a7ac>] (uart_add_one_port+0x2e8/0x420)

[    0.530426] [<c033a4c4>] (uart_add_one_port+0x0/0x420) from [<c033e610>] (serial_omap_probe+0x2dc/0x430)

[    0.530426] [<c033e334>] (serial_omap_probe+0x0/0x430) from [<c034c028>] (platform_drv_probe+0x28/0x2c)

[    0.530426] [<c034c000>] (platform_drv_probe+0x0/0x2c) from [<c034aa10>] (driver_probe_device+0xa0/0x1b4)

[    0.530426] [<c034a970>] (driver_probe_device+0x0/0x1b4) from [<c034ac14>] (__driver_attach+0x9c/0xa0)

[    0.532135]  r7:e7058360 r6:e78eca3c r5:c0908534 r4:e78eca08

[    0.532135] [<c034ab78>] (__driver_attach+0x0/0xa0) from [<c0349424>] (bus_for_each_dev+0x78/0xac)

[    0.532714]  r7:e7058360 r6:c034ab78 r5:c0908534 r4:00000000

[    0.532714] [<c03493ac>] (bus_for_each_dev+0x0/0xac) from [<c034a66c>] (driver_attach+0x2c/0x30)

[    0.532714]  r6:c0909068 r5:c0908534 r4:00000000

[    0.533508] [<c034a640>] (driver_attach+0x0/0x30) from [<c034a208>] (bus_add_driver+0xd4/0x27c)

[    0.533660] [<c034a134>] (bus_add_driver+0x0/0x27c) from [<c034b38c>] (driver_register+0x98/0x16c)

[    0.533660]  r8:00000000 r7:00000013 r6:c00c9420 r5:e787c028 r4:c0908534

[    0.533660] [<c034b2f4>] (driver_register+0x0/0x16c) from [<c034c7ec>] (platform_driver_register+0x64/0x68)

[    0.534301]  r9:00000000 r8:00000000 r7:00000013 r6:c00c9420 r5:e787c028

[    0.534790] r4:c0929e80

[    0.534790] [<c034c788>] (platform_driver_register+0x0/0x68) from [<c002b810>] (serial_omap_init+0x2c/0x50)

[    0.535156] [<c002b7e4>] (serial_omap_init+0x0/0x50) from [<c006a7bc>] (do_one_initcall+0x12c/0x188)

[    0.535156]  r5:e787c028 r4:c0929e80

[    0.535156] [<c006a690>] (do_one_initcall+0x0/0x188) from [<c0008adc>] (kernel_init+0xc8/0x150)

[    0.535675] [<c0008a14>] (kernel_init+0x0/0x150) from [<c00c9420>] (do_exit+0x0/0x798)

[    0.535675] ---[ end trace 2ec25b80b504cb41 ]---

[    0.536102] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3

[    0.536773] omap_ion_probe: adding heap secure_input of type 2 with bfd00000@0

[    0.536773] omap_ion_probe: adding heap secure_output_wfdhdcp of type 2 with bfd00000@0

[    0.536773] omap_ion_probe: adding heap tiler of type 4 with bae00000@0

[    0.536773] omap_ion_probe: adding heap nonsecure_tiler of type 4 with bae00000@0

[    0.536773] omap_ion_probe: adding heap system of type 0 with 0@0

[    0.537261] omap_ion_probe: adding heap tiler_reservation of type 5 with 0@0

[    0.540496] brd: module loaded

[    0.540496] loop: module loaded

[    0.544189] zram: Created 1 device(s) ...

[    0.544616] sec_jack_probe : Registering jack driver

[    0.545898] print_constraints: WM1811 LDO1: at 3000 mV 

[    0.546234] print_constraints: WM1811 LDO2: at 1050 mV 

[    0.549896] wm8994 1-001a: Succeeded to read ID register

[    0.552093] wm8994 1-001a: WM1811 revision D CUST_ID 00

[    0.556121] wm8994 1-001a: No interrupt specified, no interrupts

[    0.556121] i2c-core: driver [wm8994] using legacy suspend method

[    0.556579] i2c-core: driver [wm8994] using legacy resume method

[    0.557495] i2c i2c-6: sendbytes: NAK bailout.

[    0.557495] stmpe811 6-0041: i2c_write failed, reg: 3, ret: -5

[    0.602966] PPP generic driver version 2.4.2

[    0.606872] PPP Deflate Compression module registered

[    0.607208] PPP BSD Compression module registered

[    0.607940] PPP MPPE Compression module registered

[    0.608001] NET: Registered protocol family 24

[    0.608001] tun: Universal TUN/TAP device driver, 1.6

[    0.610351] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[    0.610351] usbcore: registered new interface driver asix

[    0.610778] usbcore: registered new interface driver cdc_ether

[    0.610809] usbcore: registered new interface driver net1080

[    0.611083] usbcore: registered new interface driver cdc_subset

[    0.611083] usbcore: registered new interface driver zaurus

[    0.611083] cdc_ncm: 04-Aug-2011

[    0.611450] usbcore: registered new interface driver cdc_ncm

[    0.611450] usbcore: registered new interface driver ath9k_htc

[    0.611877] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    0.611877] usbcore: registered new interface driver cdc_acm

[    0.612274] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[    0.612457] usbcore: registered new interface driver usblp

[    0.612457] Initializing USB Mass Storage driver...

[    0.612731] usbcore: registered new interface driver usb-storage

[    0.612731] USB Mass Storage support registered.

[    0.612823] usbcore: registered new interface driver usbserial

[    0.612823] usbserial: USB Serial Driver core

[    0.613311] USB Serial support registered for pl2303

[    0.613311] usbcore: registered new interface driver pl2303

[    0.613311] pl2303: Prolific PL2303 USB to serial adaptor driver

[    0.614807] android_usb gadget: Mass Storage Function, version: 2009/09/11

[    0.614807] android_usb gadget: Number of LUNs=1

[    0.615020]  lun0: LUN: removable file: (no medium)

[    0.615112] android_usb gadget: android_usb ready

[    0.615386] musb-hdrc musb-hdrc: MUSB HDRC host driver

[    0.615661] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1

[    0.615661] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    0.615661] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.616088] usb usb1: Product: MUSB HDRC host driver

[    0.616088] usb usb1: Manufacturer: Linux 3.0.101-replicant musb-hcd

[    0.616241] usb usb1: SerialNumber: musb-hdrc

[    0.616241] hub 1-0:1.0: USB hub found

[    0.616851] hub 1-0:1.0: 1 port detected

[    0.617370] mousedev: PS/2 mouse device common for all mice

[    0.617584] usbcore: registered new interface driver xpad

[    0.617584] usbcore: registered new interface driver usb_acecad

[    0.617584] acecad: v3.2:USB Acecad Flair tablet driver

[    0.617980] usbcore: registered new interface driver aiptek

[    0.618133] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)

[    0.618133] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen

[    0.618377] usbcore: registered new interface driver gtco

[    0.618530] GTCO usb driver version: 2.00.0006

[    0.618621] usbcore: registered new interface driver hanwang

[    0.618682] usbcore: registered new interface driver kbtab

[    0.618865] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver

[    0.619110] usbcore: registered new interface driver wacom

[    0.619262] wacom: v1.52:USB Wacom tablet driver

[    0.619262] tsp: ts_probe

[    0.619262] input: sec_touchscreen as /devices/virtual/input/input0

[    1.133850] tsp: ts_probe: Start touchscreen. name: synaptics_ts, irq: 206

[    1.134246] GPIO Input Driver: Start gpio inputs for espresso-gpio-keypad in interrupt mode

[    1.134521] GPIO Input Driver: Start gpio inputs for espresso-gpio-keypad in interrupt mode

[    1.134735] input: espresso-gpio-keypad as /devices/virtual/input/input1

[    1.138519] using rtc device, twl_rtc, for alarms

[    1.138916] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0

[    1.140319] i2c /dev entries driver

[    1.141082] dmm: probe base: fd300000, irq 145

[    1.290527] max17042 7-0036: probed

[    1.290527] smb347-charger 5-0006: probed

[    1.302215] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec

[    1.303344] device-mapper: uevent: version 1.0.3

[    1.304107] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com

[    1.304107] Bluetooth: HCI UART driver ver 2.2

[    1.304931] Bluetooth: HCI H4 protocol initialized

[    1.305236] cpuidle: using governor ladder

[    1.305267] cpuidle: using governor menu

[    1.339782] usbcore: registered new interface driver usbhid

[    1.339904] usbhid: USB HID core driver

[    1.340942] OMAP HSI: HSI driver version 0.4.3

[    1.341247] omap_hsi omap_hsi.0: Registering IRQ hsi_p1_mpu (99)

[    1.341339] omap_hsi omap_hsi.0: HSI port 1 initialized

[    1.341461] omap_hsi omap_hsi.0: Registering IRQ hsi_dma_mpu (103)

[    1.341644] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101

[    1.342803] omap_hsi omap_hsi.0: Cannot set HSI FClk to default value: 96000000. Will retry on next open

[    1.350585] yas_acc_core_driver_init: set from board file.

[    1.350738] yas_acc_core_driver_init: accelerometer position is 5

[    1.350982] input: accelerometer as /devices/virtual/input/input2

[    1.351196] yas_acc_probe -

[    1.351379] i2c-core: driver [accelerometer] using legacy suspend method

[    1.351501] i2c-core: driver [accelerometer] using legacy resume method

[    1.351806] input: geomagnetic as /devices/platform/omap/omap_i2c.4/i2c-4/4-002e/input/input3

[    1.352233] input: geomagnetic_raw as /devices/platform/omap/omap_i2c.4/i2c-4/4-002e/input/input4

[    1.352508] geomagnetic_probe: set from board file.

[    1.352569] geomagnetic_probe: yas magnetic position is 6

[    1.352905] geomagnetic_probe: yamaha magnetic sensor id = 1

[    1.353149] i2c-core: driver [geomagnetic] using legacy suspend method

[    1.353271] i2c-core: driver [geomagnetic] using legacy resume method

[    1.353851] input: orientation as /devices/virtual/input/input5

[    1.571990] Lux : 53

[    1.572296] input: light_sensor as /devices/virtual/input/input6

[    1.572570] bh1721fvc_probe: success!

[    1.573028] usbcore: registered new interface driver snd-usb-audio

[    1.607849] mmc0: moviNAND VHX 4.41 DISCARD feature enabled

[    1.608764] mmc0: new high speed DDR MMC card at address 0001

[    1.609222] mmcblk0: mmc0:0001 MAG2GA 14.6 GiB 

[    1.609405] mmcblk0boot0: mmc0:0001 MAG2GA partition 1 2.00 MiB

[    1.609680] mmcblk0boot1: mmc0:0001 MAG2GA partition 2 2.00 MiB

[    1.613616]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11

[    1.615936]  mmcblk0boot1: unknown partition table

[    1.616851]  mmcblk0boot0: unknown partition table

[    1.631469] wm8994-codec wm8994-codec: Failed to request Jack detect IRQ: -22

[    1.654602] asoc: wm8994-aif1 <-> omap-mcbsp-dai.2 mapping ok

[    1.655822] asoc: wm8994-aif2 <-> CP mapping ok

[    1.656921] asoc: wm8994-aif3 <-> BT mapping ok

[    1.657714] ALSA device list:

[    1.657836]   #0: omap4_wm8994

[    1.658081] GACT probability NOT on

[    1.658142] Mirror/redirect action on

[    1.658294] u32 classifier

[    1.658355]     Actions configured

[    1.658447] Netfilter messages via NETLINK v0.30.

[    1.658569] nf_conntrack version 0.5.0 (14646 buckets, 58584 max)

[    1.659973] ctnetlink v0.93: registering with nfnetlink.

[    1.660064] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

[    1.660217] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

[    1.660736] xt_time: kernel timezone is -0000

[    1.662597] ip_tables: (C) 2000-2006 Netfilter Core Team

[    1.662811] arp_tables: (C) 2002 David S. Miller

[    1.662994] TCP cubic registered

[    1.663085] Initializing XFRM netlink socket

[    1.664062] NET: Registered protocol family 10

[    1.669860] Mobile IPv6

[    1.669982] ip6_tables: (C) 2000-2006 Netfilter Core Team

[    1.670379] IPv6 over IPv4 tunneling driver

[    1.678833] NET: Registered protocol family 17

[    1.679016] NET: Registered protocol family 15

[    1.679412] Bridge firewalling registered

[    1.680664] Bluetooth: RFCOMM TTY layer initialized

[    1.682891] Bluetooth: RFCOMM socket layer initialized

[    1.682983] Bluetooth: RFCOMM ver 1.11

[    1.683044] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[    1.683227] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[    1.683441] NET: Registered protocol family 35

[    1.683959] Registering the dns_resolver key type

[    1.684051] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

[    1.684295] ThumbEE CPU extension supported.

[    1.684387] Registering SWP/SWPB emulation handler

[    1.684509] Registering SDIV/UDIV emulation handler

[    1.689697] Reprogramming LPDDR2 timings to 400000000 Hz

[    1.690032] sr_init: No PMIC hook to init smartreflex

[    1.690582] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized

[    1.690917] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized

[    1.691131] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized

[    1.691528] SmartReflex class 1.5 driver: initialized (86400000ms)

[    1.691864] cpufreq_interactive_input_connect: connect to sec_touchscreen

[    1.692291] Power Management for TI OMAP4.

[    1.692535] OMAP4 PM: Static dependency added between MPUSS <-> EMIF, MPUSS <-> L4_PER/CFG MPUSS <-> L3_MAIN_1.

[    1.692657] OMAP4 PM: Static dependency added between DUCATI <-> L4_PER/CFG and DUCATI <-> L3.

[    1.699523] clock: disabling unused clocks to save power

[    1.720184] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1388000Calib=1266040 margin=0

[    1.720306] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=950000Calib=860920 margin=0

[    1.720397] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1127000Calib=1076140 margin=0

[    1.784942] cannot apply mgr(lcd) on inactive device

[    1.785156] omapfb omapfb: failed to apply dispc config

[    1.785308] cannot apply mgr(tv) on inactive device

[    1.785491] omapfb omapfb: failed to apply dispc config

[    1.785644] cannot apply mgr(lcd2) on inactive device

[    1.785766] omapfb omapfb: failed to apply dispc config

[    1.902648] mmc1: host does not support reading read-only switch. assuming write-enable.

[    1.904663] mmc1: new high speed SDHC card at address 59b4

[    1.905059] mmcblk1: mmc1:59b4 USD00 30.0 GiB 

[    1.912750]  mmcblk1: p1 p2

[    1.970306] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=962000Calib=886240 margin=0

[    1.970764] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1025000Calib=886240 margin=0

[    2.120025] regulator_init_complete: LDO2: disabling

[    2.121307] regulator_init_complete: LDOLN: disabling

[    2.124969] twl_rtc twl_rtc: setting system clock to 2019-02-02 14:23:13 UTC (1549117393)

[    2.128753] batman_probe: Battery manager probe done

[    2.130218] Warning: unable to open an initial console.

[    2.130706] Freeing init memory: 392K

[    2.137878] init: init started!

[    2.153869] SELinux: 2048 avtab hash slots, 5389 rules.

[    2.163726] SELinux: 2048 avtab hash slots, 5389 rules.

[    2.164154] SELinux:  1 users, 2 roles, 584 types, 0 bools, 1 sens, 1024 cats

[    2.164794] SELinux:  87 classes, 5389 rules

[    2.169891] SELinux:  Completing initialization.

[    2.170135] SELinux:  Setting up existing superblocks.

[    2.170410] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

[    2.170867] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts

[    2.171478] SELinux: initialized (dev bdev, type bdev), not configured for labeling

[    2.171752] SELinux: initialized (dev proc, type proc), uses genfs_contexts

[    2.172210] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[    2.172668] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts

[    2.221923] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs

[    2.222412] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs

[    2.222656] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling

[    2.222900] SELinux: initialized (dev devpts, type devpts), uses transition SIDs

[    2.223388] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts

[    2.224029] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts

[    2.224273] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[    2.224761] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

[    2.449401] type=1403 audit(1549117393.820:2): policy loaded auid=4294967295 ses=4294967295

[    2.451049] type=1404 audit(1549117393.820:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295

[    2.642761] init: (Initializing SELinux enforcing took 0.50s.)

[    2.670776] init: init second stage started!

[    2.714874] adc_check_1 adc=3056

[    2.724914] adc_check_1 adc=3059

[    2.735534] adc_check_1 adc=3059

[    2.746093] adc_check_1 adc=3065

[    2.756134] adc_check_1 adc=3052

[    2.756439] check_charger_type: Charger type is [AC], adc = 3058

[    2.756835] charger_detect_work: cable flag : 1, cable_type : 2

[    2.779846] smb347-charger 5-0006: charging current limit set to 1.8A

[    2.780090] cable detect:TA attach, current device = 0x0100

[    2.780487] espresso_con_ta_charger_attached, USB_EVENT_CHARGER

[    2.792846] tsp: TA attached

[    2.864715] init: waitpid failed: No child processes

[    2.865539] init: (Loading properties from /default.prop took 0.00s.)

[    2.876617] init: (Parsing /init.environ.rc took 0.00s.)

[    2.877258] init: (Parsing /init.usb.rc took 0.00s.)

[    2.878082] init: (Parsing init.omap4.rc took 0.00s.)

[    2.878662] init: (Parsing init.espresso.sensors.rc took 0.00s.)

[    2.879119] init: (Parsing init.espresso.usb.rc took 0.00s.)

[    2.879333] init: (Parsing /init.espresso.rc took 0.00s.)

[    2.880096] init: (Parsing /init.usb.configfs.rc took 0.00s.)

[    2.880432] init: (Parsing /init.zygote32.rc took 0.00s.)

[    2.880706] init: (Parsing /init.trace.rc took 0.00s.)

[    2.881622] init: (Parsing /init.cm.rc took 0.00s.)

[    2.881744] init: (Parsing /init.rc took 0.02s.)

[    2.882110] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.

[    2.882537] init: Starting service 'ueventd'...

[    2.883361] init: Waiting for /dev/.coldboot_done...

[    2.886230] ueventd: ueventd started!

[    2.899902] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1325000Calib=1177420 margin=0

[    3.121032] ueventd: Coldboot took 0.22s.

[    3.125732] init: Waiting for /dev/.coldboot_done took 0.24s.

[    3.125915] init: /dev/hw_random not found

[    3.126159] keychord: using input dev espresso-gpio-keypad for fevent

[    3.149993] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[    3.150543] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[    3.173461] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[    3.175201] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[    3.179382] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory

[    3.180206] init: write_file: Unable to open '/proc/sys/net/ipv4/fwmark_reflect': No such file or directory

[    3.180389] init: write_file: Unable to open '/proc/sys/net/ipv6/fwmark_reflect': No such file or directory

[    3.180572] init: write_file: Unable to open '/proc/sys/net/ipv4/tcp_fwmark_accept': No such file or directory

[    3.282958] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[    3.283905] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument

[    3.295715] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory

[    3.302001] init: /dev/hw_random not found

[    3.313079] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: barrier=1

[    3.313171] SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr

[    3.313476] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-name/FACTORYFS,target=/system,type=ext4)=0

[    3.336364] EXT4-fs (mmcblk0p1): recovery complete

[    3.337188] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro

[    3.337371] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr

[    3.337585] fs_mgr: check_fs(): mount(/dev/block/platform/omap/omap_hsmmc.1/by-name/EFS,/efs,ext4)=0: Success

[    3.384246] fs_mgr: check_fs(): unmount(/efs) succeeded

[    3.386871] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.1/by-name/EFS

[    3.462463] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1200000Calib=1063480 margin=0

[    3.502227] e2fsck: e2fsck 1.42.9 (28-Dec-2013)

[    3.502258] 

[    3.502441] e2fsck: /dev/block/platform/omap/omap_hsmmc.1/by-name/EFS: clean, 39/1280 files, 1147/5120 blocks

[    3.502441] 

[    3.508087] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: barrier=1

[    3.508178] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr

[    3.508422] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-name/EFS,target=/efs,type=ext4)=0

[    3.513885] EXT4-fs (mmcblk0p10): VFS: Can't find ext4 filesystem

[    3.548370] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-name/DATAFS,target=/data,type=ext4)=-1

[    3.548889] F2FS-fs (mmcblk0p10): Magic Mismatch, valid(0xf2f52010) - read(0xaf6b1239)

[    3.549041] F2FS-fs (mmcblk0p10): Can't find valid F2FS filesystem in 1th superblock

[    3.549438] F2FS-fs (mmcblk0p10): Magic Mismatch, valid(0xf2f52010) - read(0x6280100f)

[    3.549499] F2FS-fs (mmcblk0p10): Can't find valid F2FS filesystem in 2th superblock

[    3.579711] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-name/DATAFS,target=/data,type=f2fs)=-1

[    3.581665] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/platform/omap/omap_hsmmc.1/by-name/DATAFS for mount /data type ext4 )

[    3.582427] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[    3.608886] EXT4-fs (mmcblk0p7): recovery complete

[    3.610595] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro

[    3.610870] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr

[    3.611175] fs_mgr: check_fs(): mount(/dev/block/platform/omap/omap_hsmmc.1/by-name/CACHE,/cache,ext4)=0: Success

[    3.642089] fs_mgr: check_fs(): unmount(/cache) succeeded

[    3.642272] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.1/by-name/CACHE

[    3.682464] e2fsck: e2fsck 1.42.9 (28-Dec-2013)

[    3.682464] 

[    3.682678] e2fsck: /dev/block/platform/omap/omap_hsmmc.1/by-name/CACHE: clean, 20/44832 files, 5842/179200 blocks

[    3.682678] 

[    3.688659] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,journal_async_commit

[    3.688842] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr

[    3.689086] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-name/CACHE,target=/cache,type=ext4)=0

[    3.689239] fs_mgr: mount_with_alternatives(): skipping fstab dup mountpoint=/cache rec[5].fs_type=f2fs already mounted as ext4.

[    3.691528] zram0: detected capacity change from 0 to 268435456

[    3.746582] Adding 262140k swap on /dev/block/zram0.  Priority:-1 extents:1 across:262140k SS

[    3.791687] PVR: PVRCore_Init

[    3.792175] PVR: LinuxMMInit: Maximum page pool size: 10800

[    3.792510] PVR: PVRSRVDriverProbe(pDevice=e793a800)

[    3.792633] PVR: SGX register base: 0x56000000

[    3.792755] PVR: SGX register size: 65535

[    3.792846] PVR: SGX IRQ: 53

[    3.793029] PVR: EnableSystemClocks: Enabling System Clocks

[    3.793548] PVR: PVRCore_Init: major device 245

[    3.795928] init: Starting service 'logd'...

[    3.825195] init: (Loading properties from /system/build.prop took 0.01s.)

[    3.825347] init: (Loading properties from /vendor/build.prop took 0.00s.)

[    3.825653] init: (Loading properties from /factory/factory.prop took 0.00s.)

[    3.829711] init: Starting service 'vold'...

[    3.831024] init: Not bootcharting.

[    3.851898] logd.auditd: start

[    3.852081] logd.klogd: 3835052492

[    3.862915] init: SELinux: Could not get canonical path /data/user/0 restorecon: No such file or directory.

[    3.863525] init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...

[    3.893524] init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 105) exited with status 0

[    3.900695] init: write_file: Unable to open '/sys/class/input/input3/distortion': No such file or directory

[    3.903106] init: write_file: Unable to open '/sys/class/input/input5/distortion': No such file or directory

[    3.904205] init: write_file: Unable to open '/sys/class/input/input6/distortion': No such file or directory

[    3.907409] init: Starting service 'sysinit'...

[    3.908599] init: (Loading properties from /data/local.prop took 0.00s.)

[    3.909393] init: Starting service 'logd-reinit'...

[    3.914459] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducati-m3.bin

[    3.917419] init: Starting service 'healthd'...

[    3.918884] init: Starting service 'lmkd'...

[    3.920349] init: Starting service 'servicemanager'...

[    3.921813] init: Starting service 'surfaceflinger'...

[    3.923034] init: Starting service 'smc_pa'...

[    3.934753] binder: 108:108 transaction failed 29189, size 0-0

[    3.953125] init: SELinux: Could not get canonical path /sys/block/sda/queue/scheduler restorecon: No such file or directory.

[    3.953369] init: SELinux: Could not get canonical path /sys/block/sde/queue/scheduler restorecon: No such file or directory.

[    3.953582] init: SELinux: Could not get canonical path /sys/block/dm-0/queue/scheduler restorecon: No such file or directory.

[    3.978881] init: service 'console' requires console

[    3.979736] init: Starting service 'defaultcrypto'...

[    3.980834] android_usb: already disabled

[    4.012176] init: Service 'smc_pa' (pid 112) exited with status 254

[    4.014770] init: Service 'logd-reinit' (pid 107) exited with status 0

[    4.017120] logd.daemon: reinit

[    4.241851] init: Service 'sysinit' (pid 106) exited with status 0

[    4.251953] init: Starting service 'netd'...

[    4.253204] init: Starting service 'debuggerd'...

[    4.253936] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'

[    4.254119] init: cannot find '/system/bin/rild', disabling 'ril-daemon'

[    4.254791] init: Starting service 'drm'...

[    4.255889] init: Starting service 'media'...

[    4.256958] init: Starting service 'installd'...

[    4.258117] init: Starting service 'keystore'...

[    4.258819] init: cannot find '/system/vendor/bin/cbd', disabling 'cpboot-daemon'

[    4.259033] init: cannot find '/system/bin/gpsd', disabling 'gpsd'

[    4.278594] init: Starting service 'dock_kbd_attach'...

[    4.281799] init: Starting service 'variant_setup'...

[    4.289215] init: Starting service 'orientationd'...

[    4.296203] init: Starting service 'geomagneticd'...

[    4.297821] init: Starting service 'zygote'...

[    4.308563] init: Service 'defaultcrypto' (pid 113) exited with status 0

[    4.317504] init: Starting service 'bootanim'...

[    4.505615] init: Service 'variant_setup' (pid 139) exited with status 0

[    4.509338] serio: Serial port ttyO3

[    4.936431] healthd: wakealarm_init: timerfd_create failed

[    5.768310] type=1400 audit(1549117395.609:4): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[    5.784667] type=1400 audit(1549117395.609:5): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[    5.784973] type=1400 audit(1549117395.609:6): avc: granted { ioctl } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev="tmpfs" ino=2143 ioctlcmd=1260 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[    5.785339] type=1400 audit(1549117395.609:7): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[    5.785705] type=1400 audit(1549117395.609:8): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[    5.786041] type=1400 audit(1549117395.609:9): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[    5.854064] set aif2 mode : Master

[   10.026306] warning: `main' uses 32-bit capabilities (legacy support in use)

[   11.667541] request_suspend_state: wakeup (3->0) at 11650543215 (2019-02-02 14:23:23.033355712 UTC)

[   12.556182] kbd: switch UART IF to AP

[   12.556365] accessory_power: acc_device 0x0, new 1 : ON

[   12.699737] kbd: UK keyboard is attacted.

[   12.743927] input: sec_keyboard as /devices/platform/sec_keyboard.0/input/input7

[   12.744262] keychord: using input dev sec_keyboard for fevent

[   12.744415] 30pin_c: detect: device=4

[   12.744476] cable detect:keboard-dock attach, current device = 0x0110

[   12.744659] notify_dock_status: status=1

[   18.182800] accel_open_calibration: Can't open calibration file

[   18.183990] accel_open_calibration: Can't open calibration file

[   19.269775] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:

[   19.269958] lowmemorykiller: oom_adj 0 => oom_score_adj 0

[   19.270050] lowmemorykiller: oom_adj 1 => oom_score_adj 58

[   19.270202] lowmemorykiller: oom_adj 2 => oom_score_adj 117

[   19.270294] lowmemorykiller: oom_adj 3 => oom_score_adj 176

[   19.270446] lowmemorykiller: oom_adj 9 => oom_score_adj 529

[   19.270538] lowmemorykiller: oom_adj 15 => oom_score_adj 1000

[   19.311218] type=1400 audit(1549117410.671:10): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   19.312866] type=1400 audit(1549117410.671:11): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   19.313323] type=1400 audit(1549117410.671:12): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   19.316101] type=1400 audit(1549117410.671:13): avc: granted { read } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   19.316589] type=1400 audit(1549117410.671:14): avc: granted { read open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   20.160400] android_usb: already disabled

[   20.160980] android_usb: already disabled

[   20.161407] mtp_bind_config

[   20.212860] acc_open

[   20.212982] acc_release

[   21.251403] dummy0: no IPv6 routers present

[   21.981292] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

[   21.988006] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

[   21.989379] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

[   27.267395] type=1400 audit(1549117418.632:15): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   27.275726] type=1400 audit(1549117418.632:16): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   27.276062] type=1400 audit(1549117418.632:17): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   27.282348] binder: 384:392 refcount change on invalid ref 175

[   27.339965] accel_open_calibration: Can't open calibration file

[   27.395416] type=1400 audit(1549117418.757:18): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   27.395843] type=1400 audit(1549117418.757:19): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   27.417785] type=1400 audit(1549117418.757:20): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   28.527374] init: Service 'bootanim' (pid 143) exited with status 0

[   29.269866] binder: 384:392 refcount change on invalid ref 224

[   39.868927] type=1400 audit(1549117431.203:21): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   39.869995] type=1400 audit(1549117431.203:22): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   39.871093] type=1400 audit(1549117431.203:23): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   41.296783] type=1400 audit(1549117432.656:24): avc: denied { module_request } for pid=129 comm="vold" kmod="cbc(aes)" scontext=u:r:vold:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0

[   41.297271] type=1400 audit(1549117432.656:25): avc: denied { module_request } for pid=129 comm="vold" kmod="cbc(aes)-all" scontext=u:r:vold:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0

[   41.297607] type=1400 audit(1549117432.656:26): avc: denied { module_request } for pid=129 comm="vold" kmod="cbc(aes-generic)" scontext=u:r:vold:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0

[   41.297912] type=1400 audit(1549117432.656:27): avc: denied { module_request } for pid=129 comm="vold" kmod="cbc(aes-generic)-all" scontext=u:r:vold:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0

[   42.662567] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem

[   42.736480] fs_mgr: check_fs(): mount(/dev/block/dm-0,/data,ext4)=-1: Invalid argument

[   42.736663] fs_mgr: Running /system/bin/e2fsck on /dev/block/dm-0

[   42.762756] type=1400 audit(1549117434.125:28): avc: denied { getattr } for pid=1109 comm="e2fsck" path="/dev/block/zram0" dev=tmpfs ino=2248 scontext=u:r:vold:s0 tcontext=u:object_r:swap_block_device:s0 tclass=blk_file permissive=0

[   42.775726] e2fsck: e2fsck 1.42.9 (28-Dec-2013)

[   42.775726] 

[   42.775939] e2fsck: ext2fs_open2: Bad magic number in super-block

[   42.775939] 

[   42.776153] e2fsck: /system/bin/e2fsck: Superblock invalid, trying backup blocks...

[   42.776153] 

[   42.776367] e2fsck: /system/bin/e2fsck: Bad magic number in super-block while trying to open /dev/block/dm-0

[   42.776367] 

[   42.776580] e2fsck: 

[   42.776580] 

[   42.776733] e2fsck: The superblock could not be read or does not describe a correct ext2

[   42.776763] 

[   42.776977] e2fsck: filesystem.  If the device is valid and it really contains an ext2

[   42.776977] 

[   42.777191] e2fsck: filesystem (and not swap or ufs or something else), then the superblock

[   42.777191] 

[   42.777343] e2fsck: is corrupt, and you might try running e2fsck with an alternate superblock:

[   42.777343] 

[   42.777557] e2fsck:     e2fsck -b 8193 <device>

[   42.777557] 

[   42.777770] e2fsck: 

[   42.777770] 

[   42.777923] e2fsck: e2fsck terminated by exit(8)

[   42.777923] 

[   42.778869] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem

[   42.814483] fs_mgr: __mount(source=/dev/block/dm-0,target=/data/tmp_mnt,type=ext4)=-1

[   42.815338] F2FS-fs (dm-0): Magic Mismatch, valid(0xf2f52010) - read(0x7deefd75)

[   42.815490] F2FS-fs (dm-0): Can't find valid F2FS filesystem in 1th superblock

[   42.816040] F2FS-fs (dm-0): Magic Mismatch, valid(0xf2f52010) - read(0x41dbfe94)

[   42.816192] F2FS-fs (dm-0): Can't find valid F2FS filesystem in 2th superblock

[   42.845733] fs_mgr: __mount(source=/dev/block/dm-0,target=/data/tmp_mnt,type=f2fs)=-1

[   42.845886] fs_mgr: Cannot mount filesystem on /dev/block/dm-0 at /data/tmp_mnt. error: Invalid argument

[   42.869781] type=1400 audit(1549117434.234:29): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   42.870178] type=1400 audit(1549117434.234:30): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   42.870574] type=1400 audit(1549117434.234:31): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   42.876281] type=1400 audit(1549117434.234:32): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   42.876800] type=1400 audit(1549117434.234:33): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   42.877197] type=1400 audit(1549117434.234:34): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   52.670928] type=1400 audit(1549117444.031:35): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   52.674621] type=1400 audit(1549117444.031:36): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   52.675048] type=1400 audit(1549117444.031:37): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   55.532714] type=1400 audit(1549117446.890:38): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   55.533142] type=1400 audit(1549117446.890:39): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   55.533508] type=1400 audit(1549117446.898:40): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file

[   57.188537] init: Service 'netd' is being killed...

[   57.189880] init: Service 'debuggerd' is being killed...

[   57.191894] init: Service 'drm' is being killed...

[   57.201477] init: Service 'media' is being killed...

[   57.206298] init: Service 'installd' is being killed...

[   57.207916] init: Service 'keystore' is being killed...

[   57.213165] init: Service 'dock_kbd_attach' is being killed...

[   57.213806] init: Service 'orientationd' is being killed...

[   57.214904] init: Service 'geomagneticd' is being killed...

[   57.215240] init: Service 'zygote' is being killed...

[   57.229309] init: Service 'netd' (pid 130) killed by signal 9

[   57.229431] init: Service 'netd' (pid 130) killing any children in process group

[   57.230255] init: Service 'debuggerd' (pid 131) killed by signal 9

[   57.230407] init: Service 'debuggerd' (pid 131) killing any children in process group

[   57.230895] init: Service 'drm' (pid 132) killed by signal 9

[   57.231079] init: Service 'drm' (pid 132) killing any children in process group

[   57.231628] init: Service 'media' (pid 133) killed by signal 9

[   57.231811] init: Service 'media' (pid 133) killing any children in process group

[   57.232391] init: Service 'installd' (pid 134) killed by signal 9

[   57.232482] init: Service 'installd' (pid 134) killing any children in process group

[   57.233123] init: Service 'keystore' (pid 135) killed by signal 9

[   57.233245] init: Service 'keystore' (pid 135) killing any children in process group

[   57.233764] init: Service 'dock_kbd_attach' (pid 138) killed by signal 9

[   57.252563] init: Untracked pid 796 killed by signal 9

[   57.272979] binder: 111:126 transaction failed 29189, size 68-0

[   57.273590] init: Starting service 'bootanim'...

[   57.275665] init: Service 'zygote' (pid 142) killed by signal 9

[   57.275817] init: Service 'zygote' (pid 142) killing any children in process group

[   57.299774] init: Untracked pid 889 killed by signal 9

[   57.307037] init: Service 'geomagneticd' (pid 141) killed by signal 9

[   57.307189] init: Service 'geomagneticd' (pid 141) killing any children in process group

[   57.341552] init: Service 'orientationd' (pid 140) killed by signal 9

[   57.341735] init: Service 'orientationd' (pid 140) killing any children in process group

[   57.342437] init: Untracked pid 962 killed by signal 9

[   57.343200] init: Untracked pid 928 killed by signal 9

[   57.362060] init: Untracked pid 911 killed by signal 9

[   57.385925] init: Untracked pid 875 killed by signal 9

[   57.400695] init: Untracked pid 611 killed by signal 9

[   57.493652] alarm_release: clear alarm, pending 0

[   58.894226] init: Untracked pid 384 killed by signal 9

[   60.236389] EXT4-fs (dm-0): recovery complete

[   60.238464] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro

[   60.238616] SELinux: initialized (dev dm-0, type ext4), uses xattr

[   60.238922] fs_mgr: check_fs(): mount(/dev/block/dm-0,/data,ext4)=0: Success

[   60.283203] fs_mgr: check_fs(): unmount(/data) succeeded

[   60.283325] fs_mgr: Running /system/bin/e2fsck on /dev/block/dm-0

[   60.308227] type=1400 audit(1549117451.671:41): avc: denied { getattr } for pid=1131 comm="e2fsck" path="/dev/block/zram0" dev=tmpfs ino=2248 scontext=u:r:vold:s0 tcontext=u:object_r:swap_block_device:s0 tclass=blk_file permissive=0

[   60.340637] e2fsck: e2fsck 1.42.9 (28-Dec-2013)

[   60.340637] 

[   60.340820] e2fsck: /dev/block/dm-0: clean, 6617/791520 files, 285635/3160055 blocks

[   60.340820] 

[   60.355682] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,journal_async_commit

[   60.355834] SELinux: initialized (dev dm-0, type ext4), uses xattr

[   60.356079] fs_mgr: __mount(source=/dev/block/dm-0,target=/data,type=ext4)=0

[   60.357604] init: (Loading properties from /data/local.prop took 0.00s.)

[   60.445617] init: Starting service 'logd-reinit'...

[   60.446960] init: Starting service 'su_daemon'...

[   60.448730] init: Starting service 'adbd'...

[   60.471038] adb_open

[   60.471130] mtp_bind_config

[   60.471221] adb_bind_config

[   60.472900] init: Not bootcharting.

[   60.496490] logd.daemon: reinit

[   60.498565] init: Service 'logd-reinit' (pid 1134) exited with status 0

[   60.951721] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...

[   60.971282] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 1142) exited with status 0

[   60.972839] init: property_set("ro.bt.bdaddr_path", "/efs/bluetooth/bt_addr") failed

[   60.975891] init: write_file: Unable to open '/sys/class/input/input3/distortion': No such file or directory

[   60.977233] init: write_file: Unable to open '/sys/class/input/input5/distortion': No such file or directory

[   60.977844] init: write_file: Unable to open '/sys/class/input/input6/distortion': No such file or directory

[   60.980041] init: Starting service 'sysinit'...

[   61.003997] init: Starting service 'netd'...

[   61.005249] init: Starting service 'debuggerd'...

[   61.006347] init: Starting service 'drm'...

[   61.007415] init: Starting service 'media'...

[   61.008453] init: Starting service 'installd'...

[   61.010620] init: Starting service 'keystore'...

[   61.011932] init: Starting service 'orientationd'...

[   61.013061] init: Starting service 'geomagneticd'...

[   61.014190] init: Starting service 'zygote'...

[   61.015594] init: Starting service 'gatekeeperd'...

[   61.016906] init: Starting service 'perfprofd'...

[   61.441650] init: Service 'sysinit' (pid 1143) exited with status 0

[   62.119140] set aif2 mode : Slave

[   62.142852] set aif2 mode : Master

[   66.911224] request_suspend_state: wakeup (0->0) at 66894226077 (2019-02-02 14:24:18.277069092 UTC)

[  100.830413] accel_open_calibration: Can't open calibration file

[  100.832244] accel_open_calibration: Can't open calibration file

[  101.720214] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:

[  101.720367] lowmemorykiller: oom_adj 0 => oom_score_adj 0

[  101.720458] lowmemorykiller: oom_adj 1 => oom_score_adj 58

[  101.720581] lowmemorykiller: oom_adj 2 => oom_score_adj 117

[  101.720672] lowmemorykiller: oom_adj 3 => oom_score_adj 176

[  101.720825] lowmemorykiller: oom_adj 9 => oom_score_adj 529

[  101.720886] lowmemorykiller: oom_adj 15 => oom_score_adj 1000

[  102.822235] acc_open

[  102.822326] acc_release

[  102.849456] init: Service 'bootanim' (pid 1117) exited with status 0

[  105.729553] SELinux: initialized (dev dm-1, type f2fs), uses xattr

[  114.724395] binder: 111:601 transaction failed 29189, size 172-0

[  114.902191] binder: 1347:1355 refcount change on invalid ref 99

[  125.778930] accel_open_calibration: Can't open calibration file

[  128.045501] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

[  128.047027] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

[  128.049621] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

[  131.373199] binder: 1347:1355 refcount change on invalid ref 357

[  211.065887] accessory_int gpio stat = 0x1

[  211.067932] usb ta_nconnected_irq : VBUS OFF

[  211.068756] [BAT_MANAGER] Charger Disconnect

[  211.069213] charger_detect_work: cable flag : 0, cable_type : 0

[  211.069427] cable detect:TA detach, current device = 0x0010

[  211.071990] tsp: No attached cable

[  211.135101] 30pin_c: detect: device=4

[  211.135314] cable detect:keboard-dock detach, current device = 0x0000

[  211.135772] notify_dock_status: status=0

[  211.798828] accessory_power: acc_device 0x2, new 1 : OFF

[  211.799041] accessory_power: turn off

[  211.799102] kbd: switch UART IF to CP

[  397.100891] usb ta_nconnected_irq : VBUS ON

[  397.102294] [BAT_MANAGER] Charger Connected

[  397.685150] adc_check_1 adc=0

[  397.695983] adc_check_1 adc=0

[  397.707275] adc_check_1 adc=0

[  397.717803] adc_check_1 adc=0

[  397.729064] adc_check_1 adc=0

[  397.729278] check_charger_type: Charger type is [USB], adc = 0

[  397.729644] charger_detect_work: cable flag : 1, cable_type : 1

[  397.743347] smb347-charger 5-0006: charging current limit set to 0.5A

[  397.743774] cable detect:USB attach, current device = 0x0080

[  397.743988] espresso_con_usb_charger_attached, USB_EVENT_VBUS

[  397.746734] tsp: USB attached

[  398.032257] android_work: sent uevent USB_STATE=CONNECTED

[  398.040740] android_work: sent uevent USB_STATE=DISCONNECTED

[  398.139282] android_work: sent uevent USB_STATE=CONNECTED

[  398.142181] android_usb gadget: high speed config #1: android

[  398.145263] android_work: sent uevent USB_STATE=CONFIGURED

[  398.206939] mtp_open