Project

General

Profile

Issue #1911 ยป android_dmesg.txt

dmesg log of cold boot with samsung keyboard dock connected - G S, 02/12/2019 10:01 AM

 
1
[    0.000000] Initializing cgroup subsys cpu
2
[    0.000000] Linux version 3.0.101-replicant (wolfi@machinist) (gcc version 5.4.1 20160919 (15:5.4.1+svn241155-1) ) #1 SMP PREEMPT Sun Dec 10 13:01:42 UTC 2017
3
[    0.000000] CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c5387d
4
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
5
[    0.000000] Machine: OMAP4 Espresso board
6
[    0.000000] android_display: setting default resolution 1280*800, bpp=4
7
[    0.000000] android_display: tiler1d 32768000
8
[    0.000000] android_display: setting fb0.vram to 4096000
9
[    0.000000] android_display: setting vram to 4096000
10
[    0.000000] android_display: ion carveouts: 88342528 tiler2d, 13107200 nonsecure
11
[    0.000000] omap4_total_ram_size = 0x40000000
12
[    0.000000] omap4_smc_size = 0x300000
13
[    0.000000] omap4_ion_heap_secure_input_size = 0x0
14
[    0.000000] omap4_ion_heap_secure_output_wfdhdcp_size = 0x0
15
[    0.000000] omap4_ducati_heap_size = 0x4100000
16
[    0.000000] omap4_ion_heap_tiler_mem_size = 0x0
17
[    0.000000] omap4_ion_heap_nonsec_tiler_mem_size  = 0x0
18
[    0.000000]  omap4_smc_addr = 0xbfd00000
19
[    0.000000] omap4_ion_heap_secure_input_addr = 0xbfd00000
20
[    0.000000] omap4_ion_heap_secure_output_wfdhdcp_addr = 0xbfd00000
21
[    0.000000] omap4_ducati_heap_addr = 0xbae00000
22
[    0.000000] omap4_ion_heap_tiler_mem_addr = 0xbae00000
23
[    0.000000] omap4_ion_heap_nonsec_tiler_mem_addr  = 0xbae00000
24
[    0.000000] omap_ion_init: secure_input id=2 [bfd00000-bfd00000] size=0
25
[    0.000000] omap_ion_init: secure_output_wfdhdcp id=5 [bfd00000-bfd00000] size=0
26
[    0.000000] omap_ion_init: tiler id=1 [bae00000-bae00000] size=0
27
[    0.000000] omap_ion_init: nonsecure_tiler id=3 [bae00000-bae00000] size=0
28
[    0.000000] omap_ion_init: system id=0 [0-0] size=0
29
[    0.000000] omap_ion_init: tiler_reservation id=4 [0-0] size=0
30
[    0.000000] Reserving 16777216 bytes SDRAM for VRAM
31
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
32
[    0.000000] OMAP4430 ES2.3
33
[    0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
34
[    0.000000] On node 0 totalpages: 240128
35
[    0.000000] free_area_init_node: node 0, pgdat c0927b00, node_mem_map c09b2000
36
[    0.000000]   Normal zone: 1280 pages used for memmap
37
[    0.000000]   Normal zone: 0 pages reserved
38
[    0.000000]   Normal zone: 162048 pages, LIFO batch:31
39
[    0.000000]   HighMem zone: 768 pages used for memmap
40
[    0.000000]   HighMem zone: 76032 pages, LIFO batch:15
41
[    0.000000] PERCPU: Embedded 7 pages/cpu @c11bb000 s7456 r8192 d13024 u32768
42
[    0.000000] pcpu-alloc: s7456 r8192 d13024 u32768 alloc=8*4096
43
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
44
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 238080
45
[    0.000000] Kernel command line: androidboot.hardware=espresso root=/dev/mmcblk0p1 rw rootdelay=2 init=/init vram=15M omapfb.vram=0:8M switch_sel=1 snd_soc_core_open.pmdown_time=1000 androidboot.emmc_checksum=3 sec_debug.enable=0 sec_debug.enable_user=0 androidboot.debug_level=0x4f4c androidboot.carrier=wifi-only mem=512M@0x80000000 mem=512M@0xa0000000 vmalloc=256m console=sec_log_buf loglevel=0 androidboot.mode=power_key bootmode=0 sec_log=2052K@0x9fdff000 sec_bootfb=8M@0xbef00000 lcd_panel_id=1 androidboot.serialno=c1607371c95e44f cordon=d6cfdf2fcb2e6bca02c66cf997481f38
46
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
47
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
48
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
49
[    0.000000] allocated 4194304 bytes of page_cgroup
50
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
51
[    0.000000] Memory: 512MB 412MB 14MB = 938MB total
52
[    0.000000] Memory: 936436k/936436k available, 112140k reserved, 307200K highmem
53
[    0.000000] Virtual kernel memory layout:
54
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
55
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
56
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
57
[    0.000000]     vmalloc : 0xe8800000 - 0xf8000000   ( 248 MB)
58
[    0.000000]     lowmem  : 0xc0000000 - 0xe8000000   ( 640 MB)
59
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
60
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
61
[    0.000000]       .init : 0xc0008000 - 0xc006a000   ( 392 kB)
62
[    0.000000]       .text : 0xc006a000 - 0xc08c1000   (8540 kB)
63
[    0.000000]       .data : 0xc08c2000 - 0xc0929d80   ( 416 kB)
64
[    0.000000]        .bss : 0xc0929e78 - 0xc09b1330   ( 542 kB)
65
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
66
[    0.000000] Preemptible hierarchical RCU implementation.
67
[    0.000000] NR_IRQS:396
68
[    0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
69
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
70
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
71
[    0.000000] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744)
72
[    0.070404] pid_max: default: 32768 minimum: 301
73
[    0.070404] Security Framework initialized
74
[    0.070404] SELinux:  Initializing.
75
[    0.070404] SELinux:  Starting in permissive mode
76
[    0.070404] Mount-cache hash table entries: 512
77
[    0.070404] Initializing cgroup subsys debug
78
[    0.070404] Initializing cgroup subsys cpuacct
79
[    0.070404] Initializing cgroup subsys memory
80
[    0.071746] Initializing cgroup subsys freezer
81
[    0.071746] CPU: Testing write buffer coherency: ok
82
[    0.071746] ftrace: allocating 22878 entries in 68 pages
83
[    0.091552] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
84
[    0.091674] L310 cache controller enabled
85
[    0.091705] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B
86
[    0.170166] CPU1: Booted secondary processor
87
[    0.240051] Brought up 2 CPUs
88
[    0.240051] SMP: Total of 2 processors activated (4022.78 BogoMIPS).
89
[    0.242797] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
90
[    0.242858] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
91
[    0.242858] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
92
[    0.242858] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
93
[    0.242889] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
94
[    0.242889] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
95
[    0.242889] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
96
[    0.242919] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
97
[    0.242919] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
98
[    0.242950] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
99
[    0.243011] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
100
[    0.243011] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
101
[    0.243255] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
102
[    0.247863] _omap4_module_wait_ready: Timeout waiting for module enable (mcpdm_fck: clkctrl = 0x30002)
103
[    0.249969] omap_hwmod: mcpdm: cannot be enabled (3)
104
[    0.255004] print_constraints: dummy: 
105
[    0.255493] NET: Registered protocol family 16
106
[    0.255645] GPMC revision 6.0
107
[    0.256439] EMIF0 is enabled with IRQ142
108
[    0.256439] EMIF1 is enabled with IRQ143
109
[    0.256530] Last reset was cold reset (PRM_RSTST=0x1)
110
[    0.256530] 
111
[    0.256713] OMAP GPIO hardware version 0.1
112
[    0.257476] omap_mux_init: Add partition: #1: core, flags: 2
113
[    0.258453] omap_mux_init: Add partition: #2: wkup, flags: 2
114
[    0.263244] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
115
[    0.263305] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
116
[    0.263305] hw-breakpoint: maximum watchpoint size is 4 bytes.
117
[    0.266601] HSI: device registered as omap_hwmod: hsi
118
[    0.266601] OMAP DMA hardware revision 0.0
119
[    0.266601] omap_rproc_get_pool: dsp - no carveout memory is available at all
120
[    0.267272] omap_rproc_get_pool: ipu - carveout memory is unavailable: 0x0, 0x0
121
[    0.273315] bio: create slab <bio-0> at 0
122
[    0.273498] print_constraints: VBATT: 1800 mV 
123
[    0.273712] print_constraints: vmmc: 2800 mV normal standby
124
[    0.273895] print_constraints: eMMC_LDO: 1800 mV 
125
[    0.274139] print_constraints: vwl1271: 2000 mV 
126
[    0.274139] i2c-core: driver [twl] using legacy suspend method
127
[    0.274597] i2c-core: driver [twl] using legacy resume method
128
[    0.274597] SCSI subsystem initialized
129
[    0.275634] usbcore: registered new interface driver usbfs
130
[    0.275726] usbcore: registered new interface driver hub
131
[    0.275817] usbcore: registered new device driver usb
132
[    0.276336] i2c-gpio i2c-gpio.6: using pins 66 (SDA) and 65 (SCL)
133
[    0.276336] i2c-gpio i2c-gpio.5: using pins 98 (SDA) and 99 (SCL)
134
[    0.276336] i2c-gpio i2c-gpio.7: using pins 62 (SDA) and 61 (SCL)
135
[    0.276794] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
136
[    0.277191] Skipping twl internal clock init and using bootloader value (unknown osc rate)
137
[    0.279571] twl6030: PIH (irq 39) chaining IRQs 368..387
138
[    0.280456] print_constraints: LDOUSB: 3300 mV normal standby
139
[    0.281799] print_constraints: VANA: 2100 mV normal standby
140
[    0.282348] print_constraints: CLK32KG: 
141
[    0.282806] print_constraints: CLK32KAUDIO: 
142
[    0.283447] print_constraints: LDO5: 1800 mV normal standby
143
[    0.284057] print_constraints: LDO1: 2800 mV normal standby
144
[    0.284454] print_constraints: LDO7: 1000 <--> 3300 mV at 900 mV normal standby
145
[    0.284942] print_constraints: LDO6: 1800 mV normal standby
146
[    0.285339] print_constraints: LDOLN: 1000 <--> 3300 mV at 1800 mV normal standby
147
[    0.285614] print_constraints: LDO2: 1000 <--> 3300 mV at 1800 mV normal standby
148
[    0.286254] print_constraints: LDO4: 2800 mV normal standby
149
[    0.286956] print_constraints: LDO3: 3300 mV normal standby
150
[    0.287170] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
151
[    0.287414] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
152
[    0.287658] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
153
[    0.287994] omap-rproc omap-rproc.0: dsp is available
154
[    0.288391] omap-rproc omap-rproc.1: ipu is available
155
[    0.288391] [SENSORS CORE] sensors_class_init
156
[    0.288452] Advanced Linux Sound Architecture Driver Version 1.0.24.
157
[    0.288452] Bluetooth: Core ver 2.16
158
[    0.289062] NET: Registered protocol family 31
159
[    0.289062] Bluetooth: HCI device and connection manager initialized
160
[    0.289093] Bluetooth: HCI socket layer initialized
161
[    0.289093] Bluetooth: L2CAP socket layer initialized
162
[    0.289123] Bluetooth: SCO socket layer initialized
163
[    0.289459] cfg80211: Calling CRDA to update world regulatory domain
164
[    0.290405] Switching to clocksource 32k_counter
165
[    0.294708] Switched to NOHz mode on CPU #0
166
[    0.294738] Switched to NOHz mode on CPU #1
167
[    0.298278] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
168
[    0.307434] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
169
[    0.307464] musb-hdrc: MHDRC RTL version 2.0 
170
[    0.307464] musb-hdrc: setup fifo_mode 4
171
[    0.307464] musb-hdrc: 28/31 max ep, 16384/16384 memory
172
[    0.307495] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
173
[    0.307922] NET: Registered protocol family 2
174
[    0.307922] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
175
[    0.309143] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
176
[    0.309143] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
177
[    0.311431] TCP: Hash tables configured (established 131072 bind 65536)
178
[    0.311431] TCP reno registered
179
[    0.311462] UDP hash table entries: 512 (order: 2, 16384 bytes)
180
[    0.311462] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
181
[    0.311462] NET: Registered protocol family 1
182
[    0.312164] Trying to unpack rootfs image as initramfs...
183
[    0.357635] Freeing initrd memory: 968K
184
[    0.477844] omap_init_opp_table: no hwmod or odev for aess, [20] cannot add OPPs.
185
[    0.478179] omap_init_opp_table: no hwmod or odev for aess, [21] cannot add OPPs.
186
[    0.478240] ram_console: got buffer at a0000000, size 200000
187
[    0.478240] ram_console: uncorrectable error in header
188
[    0.478240] ram_console: no valid data in buffer (sig = 0x930e920d)
189
[    0.479583] console [ram-1] enabled
190
[    0.479583] omap-iommu omap-iommu.0: ducati registered
191
[    0.479583] omap-iommu omap-iommu.1: tesla registered
192
[    0.479583] audit: initializing netlink socket (disabled)
193
[    0.479583] type=2000 audit(0.460:1): initialized
194
[    0.500518] highmem bounce pool size: 64 pages
195
[    0.500518] ashmem: initialized
196
[    0.512603] fuse init (API version 7.16)
197
[    0.512603] SELinux:  Registering netfilter hooks
198
[    0.515289] io scheduler noop registered
199
[    0.515380] io scheduler deadline registered
200
[    0.515380] io scheduler cfq registered (default)
201
[    0.516326] OMAP DSS rev 4.0
202
[    0.520660] dsscomp: initializing.
203
[    0.520751] misc dsscomp: display0=ltn_panel
204
[    0.520751] misc dsscomp: found 1 displays and 4 overlays, WB overlay 1
205
[    0.521240] could not allocate slot
206
[    0.521850] omap-rproc omap-rproc.1: powering up ipu
207
[    0.522247] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
208
[    0.522338] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
209
[    0.523468] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! 
210
[    0.523468] OMAPRPC: debug=0
211
[    0.523986] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
212
[    0.524322] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
213
[    0.524993] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
214
[    0.524993] ------------[ cut here ]------------
215
[    0.525177] WARNING: at /home/wolfi/replicant/6.0-romsrc-clean/kernel/samsung/espresso10/arch/arm/mach-omap2/omap_hwmod.c:1274 _enable+0x1bc/0x1dc()
216
[    0.525177] omap_hwmod: uart3: enabled state can only be entered from initialized, idle, or disabled state
217
[    0.525451] Modules linked in:
218
[    0.525726] Backtrace: 
219
[    0.525726] [<c0074ae0>] (dump_backtrace+0x0/0x114) from [<c0699bbc>] (dump_stack+0x20/0x24)
220
[    0.525726]  r7:000004fa r6:c080d94c r5:00000009 r4:e787dc10
221
[    0.526428] [<c0699b9c>] (dump_stack+0x0/0x24) from [<c00c5040>] (warn_slowpath_common+0x64/0x74)
222
[    0.526428] [<c00c4fdc>] (warn_slowpath_common+0x0/0x74) from [<c00c5090>] (warn_slowpath_fmt+0x40/0x48)
223
[    0.526428]  r9:e787c000 r8:c00e8cc8 r7:c08db598 r6:a0000093 r5:c08ea688
224
[    0.526428] r4:c080dbd0
225
[    0.526428] [<c00c5050>] (warn_slowpath_fmt+0x0/0x48) from [<c0083cac>] (_enable+0x1bc/0x1dc)
226
[    0.527374]  r3:c08173fc r2:c080dbd0
227
[    0.527374]  r4:c08ea63c
228
[    0.527374] [<c0083af0>] (_enable+0x0/0x1dc) from [<c00842f0>] (omap_hwmod_enable+0x34/0x54)
229
[    0.528015]  r7:c08db598 r6:a0000093 r5:c08ea688 r4:c08ea63c
230
[    0.528015] [<c00842bc>] (omap_hwmod_enable+0x0/0x54) from [<c0080c0c>] (uart_enable_hwmod+0x20/0x28)
231
[    0.528533]  r7:c08db598 r6:00000001 r5:3b9aca00 r4:e78eca00
232
[    0.528533] [<c0080bec>] (uart_enable_hwmod+0x0/0x28) from [<c00a1b10>] (_omap_device_activate+0x84/0x114)
233
[    0.528533] [<c00a1a8c>] (_omap_device_activate+0x0/0x114) from [<c00a2280>] (omap_device_enable+0x3c/0x98)
234
[    0.528533]  r7:c08f37b8 r6:00000004 r5:e78eca08 r4:e78eca00
235
[    0.528533] [<c00a2244>] (omap_device_enable+0x0/0x98) from [<c00a22fc>] (_od_runtime_resume+0x20/0x2c)
236
[    0.529754]  r4:e78eca08
237
[    0.529754] [<c00a22dc>] (_od_runtime_resume+0x0/0x2c) from [<c0351d80>] (rpm_callback+0x60/0x70)
238
[    0.530059]  r5:e78eca08 r4:c00a22dc
239
[    0.530059] [<c0351d20>] (rpm_callback+0x0/0x70) from [<c0352b38>] (rpm_resume+0x318/0x53c)
240
[    0.530426]  r7:c08f37b8 r6:00000004 r5:c08c4080 r4:e78eca08
241
[    0.530426] [<c0352820>] (rpm_resume+0x0/0x53c) from [<c0352db4>] (__pm_runtime_resume+0x58/0x70)
242
[    0.530426] [<c0352d5c>] (__pm_runtime_resume+0x0/0x70) from [<c033c674>] (serial_omap_pm+0x30/0x250)
243
[    0.530426]  r7:c0908570 r6:e7083000 r5:c08d0888 r4:e7090178
244
[    0.530426] [<c033c644>] (serial_omap_pm+0x0/0x250) from [<c033a7ac>] (uart_add_one_port+0x2e8/0x420)
245
[    0.530426] [<c033a4c4>] (uart_add_one_port+0x0/0x420) from [<c033e610>] (serial_omap_probe+0x2dc/0x430)
246
[    0.530426] [<c033e334>] (serial_omap_probe+0x0/0x430) from [<c034c028>] (platform_drv_probe+0x28/0x2c)
247
[    0.530426] [<c034c000>] (platform_drv_probe+0x0/0x2c) from [<c034aa10>] (driver_probe_device+0xa0/0x1b4)
248
[    0.530426] [<c034a970>] (driver_probe_device+0x0/0x1b4) from [<c034ac14>] (__driver_attach+0x9c/0xa0)
249
[    0.532135]  r7:e7058360 r6:e78eca3c r5:c0908534 r4:e78eca08
250
[    0.532135] [<c034ab78>] (__driver_attach+0x0/0xa0) from [<c0349424>] (bus_for_each_dev+0x78/0xac)
251
[    0.532714]  r7:e7058360 r6:c034ab78 r5:c0908534 r4:00000000
252
[    0.532714] [<c03493ac>] (bus_for_each_dev+0x0/0xac) from [<c034a66c>] (driver_attach+0x2c/0x30)
253
[    0.532714]  r6:c0909068 r5:c0908534 r4:00000000
254
[    0.533508] [<c034a640>] (driver_attach+0x0/0x30) from [<c034a208>] (bus_add_driver+0xd4/0x27c)
255
[    0.533660] [<c034a134>] (bus_add_driver+0x0/0x27c) from [<c034b38c>] (driver_register+0x98/0x16c)
256
[    0.533660]  r8:00000000 r7:00000013 r6:c00c9420 r5:e787c028 r4:c0908534
257
[    0.533660] [<c034b2f4>] (driver_register+0x0/0x16c) from [<c034c7ec>] (platform_driver_register+0x64/0x68)
258
[    0.534301]  r9:00000000 r8:00000000 r7:00000013 r6:c00c9420 r5:e787c028
259
[    0.534790] r4:c0929e80
260
[    0.534790] [<c034c788>] (platform_driver_register+0x0/0x68) from [<c002b810>] (serial_omap_init+0x2c/0x50)
261
[    0.535156] [<c002b7e4>] (serial_omap_init+0x0/0x50) from [<c006a7bc>] (do_one_initcall+0x12c/0x188)
262
[    0.535156]  r5:e787c028 r4:c0929e80
263
[    0.535156] [<c006a690>] (do_one_initcall+0x0/0x188) from [<c0008adc>] (kernel_init+0xc8/0x150)
264
[    0.535675] [<c0008a14>] (kernel_init+0x0/0x150) from [<c00c9420>] (do_exit+0x0/0x798)
265
[    0.535675] ---[ end trace 2ec25b80b504cb41 ]---
266
[    0.536102] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
267
[    0.536773] omap_ion_probe: adding heap secure_input of type 2 with bfd00000@0
268
[    0.536773] omap_ion_probe: adding heap secure_output_wfdhdcp of type 2 with bfd00000@0
269
[    0.536773] omap_ion_probe: adding heap tiler of type 4 with bae00000@0
270
[    0.536773] omap_ion_probe: adding heap nonsecure_tiler of type 4 with bae00000@0
271
[    0.536773] omap_ion_probe: adding heap system of type 0 with 0@0
272
[    0.537261] omap_ion_probe: adding heap tiler_reservation of type 5 with 0@0
273
[    0.540496] brd: module loaded
274
[    0.540496] loop: module loaded
275
[    0.544189] zram: Created 1 device(s) ...
276
[    0.544616] sec_jack_probe : Registering jack driver
277
[    0.545898] print_constraints: WM1811 LDO1: at 3000 mV 
278
[    0.546234] print_constraints: WM1811 LDO2: at 1050 mV 
279
[    0.549896] wm8994 1-001a: Succeeded to read ID register
280
[    0.552093] wm8994 1-001a: WM1811 revision D CUST_ID 00
281
[    0.556121] wm8994 1-001a: No interrupt specified, no interrupts
282
[    0.556121] i2c-core: driver [wm8994] using legacy suspend method
283
[    0.556579] i2c-core: driver [wm8994] using legacy resume method
284
[    0.557495] i2c i2c-6: sendbytes: NAK bailout.
285
[    0.557495] stmpe811 6-0041: i2c_write failed, reg: 3, ret: -5
286
[    0.602966] PPP generic driver version 2.4.2
287
[    0.606872] PPP Deflate Compression module registered
288
[    0.607208] PPP BSD Compression module registered
289
[    0.607940] PPP MPPE Compression module registered
290
[    0.608001] NET: Registered protocol family 24
291
[    0.608001] tun: Universal TUN/TAP device driver, 1.6
292
[    0.610351] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
293
[    0.610351] usbcore: registered new interface driver asix
294
[    0.610778] usbcore: registered new interface driver cdc_ether
295
[    0.610809] usbcore: registered new interface driver net1080
296
[    0.611083] usbcore: registered new interface driver cdc_subset
297
[    0.611083] usbcore: registered new interface driver zaurus
298
[    0.611083] cdc_ncm: 04-Aug-2011
299
[    0.611450] usbcore: registered new interface driver cdc_ncm
300
[    0.611450] usbcore: registered new interface driver ath9k_htc
301
[    0.611877] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
302
[    0.611877] usbcore: registered new interface driver cdc_acm
303
[    0.612274] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
304
[    0.612457] usbcore: registered new interface driver usblp
305
[    0.612457] Initializing USB Mass Storage driver...
306
[    0.612731] usbcore: registered new interface driver usb-storage
307
[    0.612731] USB Mass Storage support registered.
308
[    0.612823] usbcore: registered new interface driver usbserial
309
[    0.612823] usbserial: USB Serial Driver core
310
[    0.613311] USB Serial support registered for pl2303
311
[    0.613311] usbcore: registered new interface driver pl2303
312
[    0.613311] pl2303: Prolific PL2303 USB to serial adaptor driver
313
[    0.614807] android_usb gadget: Mass Storage Function, version: 2009/09/11
314
[    0.614807] android_usb gadget: Number of LUNs=1
315
[    0.615020]  lun0: LUN: removable file: (no medium)
316
[    0.615112] android_usb gadget: android_usb ready
317
[    0.615386] musb-hdrc musb-hdrc: MUSB HDRC host driver
318
[    0.615661] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
319
[    0.615661] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
320
[    0.615661] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
321
[    0.616088] usb usb1: Product: MUSB HDRC host driver
322
[    0.616088] usb usb1: Manufacturer: Linux 3.0.101-replicant musb-hcd
323
[    0.616241] usb usb1: SerialNumber: musb-hdrc
324
[    0.616241] hub 1-0:1.0: USB hub found
325
[    0.616851] hub 1-0:1.0: 1 port detected
326
[    0.617370] mousedev: PS/2 mouse device common for all mice
327
[    0.617584] usbcore: registered new interface driver xpad
328
[    0.617584] usbcore: registered new interface driver usb_acecad
329
[    0.617584] acecad: v3.2:USB Acecad Flair tablet driver
330
[    0.617980] usbcore: registered new interface driver aiptek
331
[    0.618133] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
332
[    0.618133] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
333
[    0.618377] usbcore: registered new interface driver gtco
334
[    0.618530] GTCO usb driver version: 2.00.0006
335
[    0.618621] usbcore: registered new interface driver hanwang
336
[    0.618682] usbcore: registered new interface driver kbtab
337
[    0.618865] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
338
[    0.619110] usbcore: registered new interface driver wacom
339
[    0.619262] wacom: v1.52:USB Wacom tablet driver
340
[    0.619262] tsp: ts_probe
341
[    0.619262] input: sec_touchscreen as /devices/virtual/input/input0
342
[    1.133850] tsp: ts_probe: Start touchscreen. name: synaptics_ts, irq: 206
343
[    1.134246] GPIO Input Driver: Start gpio inputs for espresso-gpio-keypad in interrupt mode
344
[    1.134521] GPIO Input Driver: Start gpio inputs for espresso-gpio-keypad in interrupt mode
345
[    1.134735] input: espresso-gpio-keypad as /devices/virtual/input/input1
346
[    1.138519] using rtc device, twl_rtc, for alarms
347
[    1.138916] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
348
[    1.140319] i2c /dev entries driver
349
[    1.141082] dmm: probe base: fd300000, irq 145
350
[    1.290527] max17042 7-0036: probed
351
[    1.290527] smb347-charger 5-0006: probed
352
[    1.302215] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
353
[    1.303344] device-mapper: uevent: version 1.0.3
354
[    1.304107] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
355
[    1.304107] Bluetooth: HCI UART driver ver 2.2
356
[    1.304931] Bluetooth: HCI H4 protocol initialized
357
[    1.305236] cpuidle: using governor ladder
358
[    1.305267] cpuidle: using governor menu
359
[    1.339782] usbcore: registered new interface driver usbhid
360
[    1.339904] usbhid: USB HID core driver
361
[    1.340942] OMAP HSI: HSI driver version 0.4.3
362
[    1.341247] omap_hsi omap_hsi.0: Registering IRQ hsi_p1_mpu (99)
363
[    1.341339] omap_hsi omap_hsi.0: HSI port 1 initialized
364
[    1.341461] omap_hsi omap_hsi.0: Registering IRQ hsi_dma_mpu (103)
365
[    1.341644] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
366
[    1.342803] omap_hsi omap_hsi.0: Cannot set HSI FClk to default value: 96000000. Will retry on next open
367
[    1.350585] yas_acc_core_driver_init: set from board file.
368
[    1.350738] yas_acc_core_driver_init: accelerometer position is 5
369
[    1.350982] input: accelerometer as /devices/virtual/input/input2
370
[    1.351196] yas_acc_probe -
371
[    1.351379] i2c-core: driver [accelerometer] using legacy suspend method
372
[    1.351501] i2c-core: driver [accelerometer] using legacy resume method
373
[    1.351806] input: geomagnetic as /devices/platform/omap/omap_i2c.4/i2c-4/4-002e/input/input3
374
[    1.352233] input: geomagnetic_raw as /devices/platform/omap/omap_i2c.4/i2c-4/4-002e/input/input4
375
[    1.352508] geomagnetic_probe: set from board file.
376
[    1.352569] geomagnetic_probe: yas magnetic position is 6
377
[    1.352905] geomagnetic_probe: yamaha magnetic sensor id = 1
378
[    1.353149] i2c-core: driver [geomagnetic] using legacy suspend method
379
[    1.353271] i2c-core: driver [geomagnetic] using legacy resume method
380
[    1.353851] input: orientation as /devices/virtual/input/input5
381
[    1.571990] Lux : 53
382
[    1.572296] input: light_sensor as /devices/virtual/input/input6
383
[    1.572570] bh1721fvc_probe: success!
384
[    1.573028] usbcore: registered new interface driver snd-usb-audio
385
[    1.607849] mmc0: moviNAND VHX 4.41 DISCARD feature enabled
386
[    1.608764] mmc0: new high speed DDR MMC card at address 0001
387
[    1.609222] mmcblk0: mmc0:0001 MAG2GA 14.6 GiB 
388
[    1.609405] mmcblk0boot0: mmc0:0001 MAG2GA partition 1 2.00 MiB
389
[    1.609680] mmcblk0boot1: mmc0:0001 MAG2GA partition 2 2.00 MiB
390
[    1.613616]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
391
[    1.615936]  mmcblk0boot1: unknown partition table
392
[    1.616851]  mmcblk0boot0: unknown partition table
393
[    1.631469] wm8994-codec wm8994-codec: Failed to request Jack detect IRQ: -22
394
[    1.654602] asoc: wm8994-aif1 <-> omap-mcbsp-dai.2 mapping ok
395
[    1.655822] asoc: wm8994-aif2 <-> CP mapping ok
396
[    1.656921] asoc: wm8994-aif3 <-> BT mapping ok
397
[    1.657714] ALSA device list:
398
[    1.657836]   #0: omap4_wm8994
399
[    1.658081] GACT probability NOT on
400
[    1.658142] Mirror/redirect action on
401
[    1.658294] u32 classifier
402
[    1.658355]     Actions configured
403
[    1.658447] Netfilter messages via NETLINK v0.30.
404
[    1.658569] nf_conntrack version 0.5.0 (14646 buckets, 58584 max)
405
[    1.659973] ctnetlink v0.93: registering with nfnetlink.
406
[    1.660064] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
407
[    1.660217] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
408
[    1.660736] xt_time: kernel timezone is -0000
409
[    1.662597] ip_tables: (C) 2000-2006 Netfilter Core Team
410
[    1.662811] arp_tables: (C) 2002 David S. Miller
411
[    1.662994] TCP cubic registered
412
[    1.663085] Initializing XFRM netlink socket
413
[    1.664062] NET: Registered protocol family 10
414
[    1.669860] Mobile IPv6
415
[    1.669982] ip6_tables: (C) 2000-2006 Netfilter Core Team
416
[    1.670379] IPv6 over IPv4 tunneling driver
417
[    1.678833] NET: Registered protocol family 17
418
[    1.679016] NET: Registered protocol family 15
419
[    1.679412] Bridge firewalling registered
420
[    1.680664] Bluetooth: RFCOMM TTY layer initialized
421
[    1.682891] Bluetooth: RFCOMM socket layer initialized
422
[    1.682983] Bluetooth: RFCOMM ver 1.11
423
[    1.683044] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
424
[    1.683227] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
425
[    1.683441] NET: Registered protocol family 35
426
[    1.683959] Registering the dns_resolver key type
427
[    1.684051] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
428
[    1.684295] ThumbEE CPU extension supported.
429
[    1.684387] Registering SWP/SWPB emulation handler
430
[    1.684509] Registering SDIV/UDIV emulation handler
431
[    1.689697] Reprogramming LPDDR2 timings to 400000000 Hz
432
[    1.690032] sr_init: No PMIC hook to init smartreflex
433
[    1.690582] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
434
[    1.690917] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
435
[    1.691131] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
436
[    1.691528] SmartReflex class 1.5 driver: initialized (86400000ms)
437
[    1.691864] cpufreq_interactive_input_connect: connect to sec_touchscreen
438
[    1.692291] Power Management for TI OMAP4.
439
[    1.692535] OMAP4 PM: Static dependency added between MPUSS <-> EMIF, MPUSS <-> L4_PER/CFG MPUSS <-> L3_MAIN_1.
440
[    1.692657] OMAP4 PM: Static dependency added between DUCATI <-> L4_PER/CFG and DUCATI <-> L3.
441
[    1.699523] clock: disabling unused clocks to save power
442
[    1.720184] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1388000Calib=1266040 margin=0
443
[    1.720306] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=950000Calib=860920 margin=0
444
[    1.720397] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1127000Calib=1076140 margin=0
445
[    1.784942] cannot apply mgr(lcd) on inactive device
446
[    1.785156] omapfb omapfb: failed to apply dispc config
447
[    1.785308] cannot apply mgr(tv) on inactive device
448
[    1.785491] omapfb omapfb: failed to apply dispc config
449
[    1.785644] cannot apply mgr(lcd2) on inactive device
450
[    1.785766] omapfb omapfb: failed to apply dispc config
451
[    1.902648] mmc1: host does not support reading read-only switch. assuming write-enable.
452
[    1.904663] mmc1: new high speed SDHC card at address 59b4
453
[    1.905059] mmcblk1: mmc1:59b4 USD00 30.0 GiB 
454
[    1.912750]  mmcblk1: p1 p2
455
[    1.970306] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=962000Calib=886240 margin=0
456
[    1.970764] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1025000Calib=886240 margin=0
457
[    2.120025] regulator_init_complete: LDO2: disabling
458
[    2.121307] regulator_init_complete: LDOLN: disabling
459
[    2.124969] twl_rtc twl_rtc: setting system clock to 2019-02-02 14:23:13 UTC (1549117393)
460
[    2.128753] batman_probe: Battery manager probe done
461
[    2.130218] Warning: unable to open an initial console.
462
[    2.130706] Freeing init memory: 392K
463
[    2.137878] init: init started!
464
[    2.153869] SELinux: 2048 avtab hash slots, 5389 rules.
465
[    2.163726] SELinux: 2048 avtab hash slots, 5389 rules.
466
[    2.164154] SELinux:  1 users, 2 roles, 584 types, 0 bools, 1 sens, 1024 cats
467
[    2.164794] SELinux:  87 classes, 5389 rules
468
[    2.169891] SELinux:  Completing initialization.
469
[    2.170135] SELinux:  Setting up existing superblocks.
470
[    2.170410] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
471
[    2.170867] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
472
[    2.171478] SELinux: initialized (dev bdev, type bdev), not configured for labeling
473
[    2.171752] SELinux: initialized (dev proc, type proc), uses genfs_contexts
474
[    2.172210] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
475
[    2.172668] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
476
[    2.221923] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
477
[    2.222412] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
478
[    2.222656] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
479
[    2.222900] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
480
[    2.223388] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
481
[    2.224029] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
482
[    2.224273] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
483
[    2.224761] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
484
[    2.449401] type=1403 audit(1549117393.820:2): policy loaded auid=4294967295 ses=4294967295
485
[    2.451049] type=1404 audit(1549117393.820:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
486
[    2.642761] init: (Initializing SELinux enforcing took 0.50s.)
487
[    2.670776] init: init second stage started!
488
[    2.714874] adc_check_1 adc=3056
489
[    2.724914] adc_check_1 adc=3059
490
[    2.735534] adc_check_1 adc=3059
491
[    2.746093] adc_check_1 adc=3065
492
[    2.756134] adc_check_1 adc=3052
493
[    2.756439] check_charger_type: Charger type is [AC], adc = 3058
494
[    2.756835] charger_detect_work: cable flag : 1, cable_type : 2
495
[    2.779846] smb347-charger 5-0006: charging current limit set to 1.8A
496
[    2.780090] cable detect:TA attach, current device = 0x0100
497
[    2.780487] espresso_con_ta_charger_attached, USB_EVENT_CHARGER
498
[    2.792846] tsp: TA attached
499
[    2.864715] init: waitpid failed: No child processes
500
[    2.865539] init: (Loading properties from /default.prop took 0.00s.)
501
[    2.876617] init: (Parsing /init.environ.rc took 0.00s.)
502
[    2.877258] init: (Parsing /init.usb.rc took 0.00s.)
503
[    2.878082] init: (Parsing init.omap4.rc took 0.00s.)
504
[    2.878662] init: (Parsing init.espresso.sensors.rc took 0.00s.)
505
[    2.879119] init: (Parsing init.espresso.usb.rc took 0.00s.)
506
[    2.879333] init: (Parsing /init.espresso.rc took 0.00s.)
507
[    2.880096] init: (Parsing /init.usb.configfs.rc took 0.00s.)
508
[    2.880432] init: (Parsing /init.zygote32.rc took 0.00s.)
509
[    2.880706] init: (Parsing /init.trace.rc took 0.00s.)
510
[    2.881622] init: (Parsing /init.cm.rc took 0.00s.)
511
[    2.881744] init: (Parsing /init.rc took 0.02s.)
512
[    2.882110] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
513
[    2.882537] init: Starting service 'ueventd'...
514
[    2.883361] init: Waiting for /dev/.coldboot_done...
515
[    2.886230] ueventd: ueventd started!
516
[    2.899902] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1325000Calib=1177420 margin=0
517
[    3.121032] ueventd: Coldboot took 0.22s.
518
[    3.125732] init: Waiting for /dev/.coldboot_done took 0.24s.
519
[    3.125915] init: /dev/hw_random not found
520
[    3.126159] keychord: using input dev espresso-gpio-keypad for fevent
521
[    3.149993] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
522
[    3.150543] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
523
[    3.173461] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
524
[    3.175201] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
525
[    3.179382] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
526
[    3.180206] init: write_file: Unable to open '/proc/sys/net/ipv4/fwmark_reflect': No such file or directory
527
[    3.180389] init: write_file: Unable to open '/proc/sys/net/ipv6/fwmark_reflect': No such file or directory
528
[    3.180572] init: write_file: Unable to open '/proc/sys/net/ipv4/tcp_fwmark_accept': No such file or directory
529
[    3.282958] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
530
[    3.283905] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
531
[    3.295715] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
532
[    3.302001] init: /dev/hw_random not found
533
[    3.313079] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: barrier=1
534
[    3.313171] SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
535
[    3.313476] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-name/FACTORYFS,target=/system,type=ext4)=0
536
[    3.336364] EXT4-fs (mmcblk0p1): recovery complete
537
[    3.337188] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
538
[    3.337371] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
539
[    3.337585] fs_mgr: check_fs(): mount(/dev/block/platform/omap/omap_hsmmc.1/by-name/EFS,/efs,ext4)=0: Success
540
[    3.384246] fs_mgr: check_fs(): unmount(/efs) succeeded
541
[    3.386871] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.1/by-name/EFS
542
[    3.462463] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1200000Calib=1063480 margin=0
543
[    3.502227] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
544
[    3.502258] 
545
[    3.502441] e2fsck: /dev/block/platform/omap/omap_hsmmc.1/by-name/EFS: clean, 39/1280 files, 1147/5120 blocks
546
[    3.502441] 
547
[    3.508087] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: barrier=1
548
[    3.508178] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
549
[    3.508422] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-name/EFS,target=/efs,type=ext4)=0
550
[    3.513885] EXT4-fs (mmcblk0p10): VFS: Can't find ext4 filesystem
551
[    3.548370] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-name/DATAFS,target=/data,type=ext4)=-1
552
[    3.548889] F2FS-fs (mmcblk0p10): Magic Mismatch, valid(0xf2f52010) - read(0xaf6b1239)
553
[    3.549041] F2FS-fs (mmcblk0p10): Can't find valid F2FS filesystem in 1th superblock
554
[    3.549438] F2FS-fs (mmcblk0p10): Magic Mismatch, valid(0xf2f52010) - read(0x6280100f)
555
[    3.549499] F2FS-fs (mmcblk0p10): Can't find valid F2FS filesystem in 2th superblock
556
[    3.579711] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-name/DATAFS,target=/data,type=f2fs)=-1
557
[    3.581665] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/platform/omap/omap_hsmmc.1/by-name/DATAFS for mount /data type ext4 )
558
[    3.582427] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
559
[    3.608886] EXT4-fs (mmcblk0p7): recovery complete
560
[    3.610595] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
561
[    3.610870] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
562
[    3.611175] fs_mgr: check_fs(): mount(/dev/block/platform/omap/omap_hsmmc.1/by-name/CACHE,/cache,ext4)=0: Success
563
[    3.642089] fs_mgr: check_fs(): unmount(/cache) succeeded
564
[    3.642272] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.1/by-name/CACHE
565
[    3.682464] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
566
[    3.682464] 
567
[    3.682678] e2fsck: /dev/block/platform/omap/omap_hsmmc.1/by-name/CACHE: clean, 20/44832 files, 5842/179200 blocks
568
[    3.682678] 
569
[    3.688659] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,journal_async_commit
570
[    3.688842] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
571
[    3.689086] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-name/CACHE,target=/cache,type=ext4)=0
572
[    3.689239] fs_mgr: mount_with_alternatives(): skipping fstab dup mountpoint=/cache rec[5].fs_type=f2fs already mounted as ext4.
573
[    3.691528] zram0: detected capacity change from 0 to 268435456
574
[    3.746582] Adding 262140k swap on /dev/block/zram0.  Priority:-1 extents:1 across:262140k SS
575
[    3.791687] PVR: PVRCore_Init
576
[    3.792175] PVR: LinuxMMInit: Maximum page pool size: 10800
577
[    3.792510] PVR: PVRSRVDriverProbe(pDevice=e793a800)
578
[    3.792633] PVR: SGX register base: 0x56000000
579
[    3.792755] PVR: SGX register size: 65535
580
[    3.792846] PVR: SGX IRQ: 53
581
[    3.793029] PVR: EnableSystemClocks: Enabling System Clocks
582
[    3.793548] PVR: PVRCore_Init: major device 245
583
[    3.795928] init: Starting service 'logd'...
584
[    3.825195] init: (Loading properties from /system/build.prop took 0.01s.)
585
[    3.825347] init: (Loading properties from /vendor/build.prop took 0.00s.)
586
[    3.825653] init: (Loading properties from /factory/factory.prop took 0.00s.)
587
[    3.829711] init: Starting service 'vold'...
588
[    3.831024] init: Not bootcharting.
589
[    3.851898] logd.auditd: start
590
[    3.852081] logd.klogd: 3835052492
591
[    3.862915] init: SELinux: Could not get canonical path /data/user/0 restorecon: No such file or directory.
592
[    3.863525] init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...
593
[    3.893524] init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 105) exited with status 0
594
[    3.900695] init: write_file: Unable to open '/sys/class/input/input3/distortion': No such file or directory
595
[    3.903106] init: write_file: Unable to open '/sys/class/input/input5/distortion': No such file or directory
596
[    3.904205] init: write_file: Unable to open '/sys/class/input/input6/distortion': No such file or directory
597
[    3.907409] init: Starting service 'sysinit'...
598
[    3.908599] init: (Loading properties from /data/local.prop took 0.00s.)
599
[    3.909393] init: Starting service 'logd-reinit'...
600
[    3.914459] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducati-m3.bin
601
[    3.917419] init: Starting service 'healthd'...
602
[    3.918884] init: Starting service 'lmkd'...
603
[    3.920349] init: Starting service 'servicemanager'...
604
[    3.921813] init: Starting service 'surfaceflinger'...
605
[    3.923034] init: Starting service 'smc_pa'...
606
[    3.934753] binder: 108:108 transaction failed 29189, size 0-0
607
[    3.953125] init: SELinux: Could not get canonical path /sys/block/sda/queue/scheduler restorecon: No such file or directory.
608
[    3.953369] init: SELinux: Could not get canonical path /sys/block/sde/queue/scheduler restorecon: No such file or directory.
609
[    3.953582] init: SELinux: Could not get canonical path /sys/block/dm-0/queue/scheduler restorecon: No such file or directory.
610
[    3.978881] init: service 'console' requires console
611
[    3.979736] init: Starting service 'defaultcrypto'...
612
[    3.980834] android_usb: already disabled
613
[    4.012176] init: Service 'smc_pa' (pid 112) exited with status 254
614
[    4.014770] init: Service 'logd-reinit' (pid 107) exited with status 0
615
[    4.017120] logd.daemon: reinit
616
[    4.241851] init: Service 'sysinit' (pid 106) exited with status 0
617
[    4.251953] init: Starting service 'netd'...
618
[    4.253204] init: Starting service 'debuggerd'...
619
[    4.253936] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
620
[    4.254119] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
621
[    4.254791] init: Starting service 'drm'...
622
[    4.255889] init: Starting service 'media'...
623
[    4.256958] init: Starting service 'installd'...
624
[    4.258117] init: Starting service 'keystore'...
625
[    4.258819] init: cannot find '/system/vendor/bin/cbd', disabling 'cpboot-daemon'
626
[    4.259033] init: cannot find '/system/bin/gpsd', disabling 'gpsd'
627
[    4.278594] init: Starting service 'dock_kbd_attach'...
628
[    4.281799] init: Starting service 'variant_setup'...
629
[    4.289215] init: Starting service 'orientationd'...
630
[    4.296203] init: Starting service 'geomagneticd'...
631
[    4.297821] init: Starting service 'zygote'...
632
[    4.308563] init: Service 'defaultcrypto' (pid 113) exited with status 0
633
[    4.317504] init: Starting service 'bootanim'...
634
[    4.505615] init: Service 'variant_setup' (pid 139) exited with status 0
635
[    4.509338] serio: Serial port ttyO3
636
[    4.936431] healthd: wakealarm_init: timerfd_create failed
637
[    5.768310] type=1400 audit(1549117395.609:4): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
638
[    5.784667] type=1400 audit(1549117395.609:5): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
639
[    5.784973] type=1400 audit(1549117395.609:6): avc: granted { ioctl } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev="tmpfs" ino=2143 ioctlcmd=1260 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
640
[    5.785339] type=1400 audit(1549117395.609:7): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
641
[    5.785705] type=1400 audit(1549117395.609:8): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
642
[    5.786041] type=1400 audit(1549117395.609:9): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
643
[    5.854064] set aif2 mode : Master
644
[   10.026306] warning: `main' uses 32-bit capabilities (legacy support in use)
645
[   11.667541] request_suspend_state: wakeup (3->0) at 11650543215 (2019-02-02 14:23:23.033355712 UTC)
646
[   12.556182] kbd: switch UART IF to AP
647
[   12.556365] accessory_power: acc_device 0x0, new 1 : ON
648
[   12.699737] kbd: UK keyboard is attacted.
649
[   12.743927] input: sec_keyboard as /devices/platform/sec_keyboard.0/input/input7
650
[   12.744262] keychord: using input dev sec_keyboard for fevent
651
[   12.744415] 30pin_c: detect: device=4
652
[   12.744476] cable detect:keboard-dock attach, current device = 0x0110
653
[   12.744659] notify_dock_status: status=1
654
[   18.182800] accel_open_calibration: Can't open calibration file
655
[   18.183990] accel_open_calibration: Can't open calibration file
656
[   19.269775] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
657
[   19.269958] lowmemorykiller: oom_adj 0 => oom_score_adj 0
658
[   19.270050] lowmemorykiller: oom_adj 1 => oom_score_adj 58
659
[   19.270202] lowmemorykiller: oom_adj 2 => oom_score_adj 117
660
[   19.270294] lowmemorykiller: oom_adj 3 => oom_score_adj 176
661
[   19.270446] lowmemorykiller: oom_adj 9 => oom_score_adj 529
662
[   19.270538] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
663
[   19.311218] type=1400 audit(1549117410.671:10): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
664
[   19.312866] type=1400 audit(1549117410.671:11): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
665
[   19.313323] type=1400 audit(1549117410.671:12): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
666
[   19.316101] type=1400 audit(1549117410.671:13): avc: granted { read } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
667
[   19.316589] type=1400 audit(1549117410.671:14): avc: granted { read open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
668
[   20.160400] android_usb: already disabled
669
[   20.160980] android_usb: already disabled
670
[   20.161407] mtp_bind_config
671
[   20.212860] acc_open
672
[   20.212982] acc_release
673
[   21.251403] dummy0: no IPv6 routers present
674
[   21.981292] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
675
[   21.988006] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
676
[   21.989379] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
677
[   27.267395] type=1400 audit(1549117418.632:15): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
678
[   27.275726] type=1400 audit(1549117418.632:16): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
679
[   27.276062] type=1400 audit(1549117418.632:17): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
680
[   27.282348] binder: 384:392 refcount change on invalid ref 175
681
[   27.339965] accel_open_calibration: Can't open calibration file
682
[   27.395416] type=1400 audit(1549117418.757:18): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
683
[   27.395843] type=1400 audit(1549117418.757:19): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
684
[   27.417785] type=1400 audit(1549117418.757:20): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
685
[   28.527374] init: Service 'bootanim' (pid 143) exited with status 0
686
[   29.269866] binder: 384:392 refcount change on invalid ref 224
687
[   39.868927] type=1400 audit(1549117431.203:21): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
688
[   39.869995] type=1400 audit(1549117431.203:22): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
689
[   39.871093] type=1400 audit(1549117431.203:23): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
690
[   41.296783] type=1400 audit(1549117432.656:24): avc: denied { module_request } for pid=129 comm="vold" kmod="cbc(aes)" scontext=u:r:vold:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0
691
[   41.297271] type=1400 audit(1549117432.656:25): avc: denied { module_request } for pid=129 comm="vold" kmod="cbc(aes)-all" scontext=u:r:vold:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0
692
[   41.297607] type=1400 audit(1549117432.656:26): avc: denied { module_request } for pid=129 comm="vold" kmod="cbc(aes-generic)" scontext=u:r:vold:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0
693
[   41.297912] type=1400 audit(1549117432.656:27): avc: denied { module_request } for pid=129 comm="vold" kmod="cbc(aes-generic)-all" scontext=u:r:vold:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0
694
[   42.662567] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem
695
[   42.736480] fs_mgr: check_fs(): mount(/dev/block/dm-0,/data,ext4)=-1: Invalid argument
696
[   42.736663] fs_mgr: Running /system/bin/e2fsck on /dev/block/dm-0
697
[   42.762756] type=1400 audit(1549117434.125:28): avc: denied { getattr } for pid=1109 comm="e2fsck" path="/dev/block/zram0" dev=tmpfs ino=2248 scontext=u:r:vold:s0 tcontext=u:object_r:swap_block_device:s0 tclass=blk_file permissive=0
698
[   42.775726] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
699
[   42.775726] 
700
[   42.775939] e2fsck: ext2fs_open2: Bad magic number in super-block
701
[   42.775939] 
702
[   42.776153] e2fsck: /system/bin/e2fsck: Superblock invalid, trying backup blocks...
703
[   42.776153] 
704
[   42.776367] e2fsck: /system/bin/e2fsck: Bad magic number in super-block while trying to open /dev/block/dm-0
705
[   42.776367] 
706
[   42.776580] e2fsck: 
707
[   42.776580] 
708
[   42.776733] e2fsck: The superblock could not be read or does not describe a correct ext2
709
[   42.776763] 
710
[   42.776977] e2fsck: filesystem.  If the device is valid and it really contains an ext2
711
[   42.776977] 
712
[   42.777191] e2fsck: filesystem (and not swap or ufs or something else), then the superblock
713
[   42.777191] 
714
[   42.777343] e2fsck: is corrupt, and you might try running e2fsck with an alternate superblock:
715
[   42.777343] 
716
[   42.777557] e2fsck:     e2fsck -b 8193 <device>
717
[   42.777557] 
718
[   42.777770] e2fsck: 
719
[   42.777770] 
720
[   42.777923] e2fsck: e2fsck terminated by exit(8)
721
[   42.777923] 
722
[   42.778869] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem
723
[   42.814483] fs_mgr: __mount(source=/dev/block/dm-0,target=/data/tmp_mnt,type=ext4)=-1
724
[   42.815338] F2FS-fs (dm-0): Magic Mismatch, valid(0xf2f52010) - read(0x7deefd75)
725
[   42.815490] F2FS-fs (dm-0): Can't find valid F2FS filesystem in 1th superblock
726
[   42.816040] F2FS-fs (dm-0): Magic Mismatch, valid(0xf2f52010) - read(0x41dbfe94)
727
[   42.816192] F2FS-fs (dm-0): Can't find valid F2FS filesystem in 2th superblock
728
[   42.845733] fs_mgr: __mount(source=/dev/block/dm-0,target=/data/tmp_mnt,type=f2fs)=-1
729
[   42.845886] fs_mgr: Cannot mount filesystem on /dev/block/dm-0 at /data/tmp_mnt. error: Invalid argument
730
[   42.869781] type=1400 audit(1549117434.234:29): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
731
[   42.870178] type=1400 audit(1549117434.234:30): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
732
[   42.870574] type=1400 audit(1549117434.234:31): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
733
[   42.876281] type=1400 audit(1549117434.234:32): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
734
[   42.876800] type=1400 audit(1549117434.234:33): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
735
[   42.877197] type=1400 audit(1549117434.234:34): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
736
[   52.670928] type=1400 audit(1549117444.031:35): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
737
[   52.674621] type=1400 audit(1549117444.031:36): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
738
[   52.675048] type=1400 audit(1549117444.031:37): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
739
[   55.532714] type=1400 audit(1549117446.890:38): avc: granted { read write } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
740
[   55.533142] type=1400 audit(1549117446.890:39): avc: granted { read write open } for pid=129 comm="vold" name="mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
741
[   55.533508] type=1400 audit(1549117446.898:40): avc: granted { getattr } for pid=129 comm="vold" path="/dev/block/mmcblk0p10" dev=tmpfs ino=2143 scontext=u:r:vold:s0 tcontext=u:object_r:userdata_block_device:s0 tclass=blk_file
742
[   57.188537] init: Service 'netd' is being killed...
743
[   57.189880] init: Service 'debuggerd' is being killed...
744
[   57.191894] init: Service 'drm' is being killed...
745
[   57.201477] init: Service 'media' is being killed...
746
[   57.206298] init: Service 'installd' is being killed...
747
[   57.207916] init: Service 'keystore' is being killed...
748
[   57.213165] init: Service 'dock_kbd_attach' is being killed...
749
[   57.213806] init: Service 'orientationd' is being killed...
750
[   57.214904] init: Service 'geomagneticd' is being killed...
751
[   57.215240] init: Service 'zygote' is being killed...
752
[   57.229309] init: Service 'netd' (pid 130) killed by signal 9
753
[   57.229431] init: Service 'netd' (pid 130) killing any children in process group
754
[   57.230255] init: Service 'debuggerd' (pid 131) killed by signal 9
755
[   57.230407] init: Service 'debuggerd' (pid 131) killing any children in process group
756
[   57.230895] init: Service 'drm' (pid 132) killed by signal 9
757
[   57.231079] init: Service 'drm' (pid 132) killing any children in process group
758
[   57.231628] init: Service 'media' (pid 133) killed by signal 9
759
[   57.231811] init: Service 'media' (pid 133) killing any children in process group
760
[   57.232391] init: Service 'installd' (pid 134) killed by signal 9
761
[   57.232482] init: Service 'installd' (pid 134) killing any children in process group
762
[   57.233123] init: Service 'keystore' (pid 135) killed by signal 9
763
[   57.233245] init: Service 'keystore' (pid 135) killing any children in process group
764
[   57.233764] init: Service 'dock_kbd_attach' (pid 138) killed by signal 9
765
[   57.252563] init: Untracked pid 796 killed by signal 9
766
[   57.272979] binder: 111:126 transaction failed 29189, size 68-0
767
[   57.273590] init: Starting service 'bootanim'...
768
[   57.275665] init: Service 'zygote' (pid 142) killed by signal 9
769
[   57.275817] init: Service 'zygote' (pid 142) killing any children in process group
770
[   57.299774] init: Untracked pid 889 killed by signal 9
771
[   57.307037] init: Service 'geomagneticd' (pid 141) killed by signal 9
772
[   57.307189] init: Service 'geomagneticd' (pid 141) killing any children in process group
773
[   57.341552] init: Service 'orientationd' (pid 140) killed by signal 9
774
[   57.341735] init: Service 'orientationd' (pid 140) killing any children in process group
775
[   57.342437] init: Untracked pid 962 killed by signal 9
776
[   57.343200] init: Untracked pid 928 killed by signal 9
777
[   57.362060] init: Untracked pid 911 killed by signal 9
778
[   57.385925] init: Untracked pid 875 killed by signal 9
779
[   57.400695] init: Untracked pid 611 killed by signal 9
780
[   57.493652] alarm_release: clear alarm, pending 0
781
[   58.894226] init: Untracked pid 384 killed by signal 9
782
[   60.236389] EXT4-fs (dm-0): recovery complete
783
[   60.238464] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
784
[   60.238616] SELinux: initialized (dev dm-0, type ext4), uses xattr
785
[   60.238922] fs_mgr: check_fs(): mount(/dev/block/dm-0,/data,ext4)=0: Success
786
[   60.283203] fs_mgr: check_fs(): unmount(/data) succeeded
787
[   60.283325] fs_mgr: Running /system/bin/e2fsck on /dev/block/dm-0
788
[   60.308227] type=1400 audit(1549117451.671:41): avc: denied { getattr } for pid=1131 comm="e2fsck" path="/dev/block/zram0" dev=tmpfs ino=2248 scontext=u:r:vold:s0 tcontext=u:object_r:swap_block_device:s0 tclass=blk_file permissive=0
789
[   60.340637] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
790
[   60.340637] 
791
[   60.340820] e2fsck: /dev/block/dm-0: clean, 6617/791520 files, 285635/3160055 blocks
792
[   60.340820] 
793
[   60.355682] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,journal_async_commit
794
[   60.355834] SELinux: initialized (dev dm-0, type ext4), uses xattr
795
[   60.356079] fs_mgr: __mount(source=/dev/block/dm-0,target=/data,type=ext4)=0
796
[   60.357604] init: (Loading properties from /data/local.prop took 0.00s.)
797
[   60.445617] init: Starting service 'logd-reinit'...
798
[   60.446960] init: Starting service 'su_daemon'...
799
[   60.448730] init: Starting service 'adbd'...
800
[   60.471038] adb_open
801
[   60.471130] mtp_bind_config
802
[   60.471221] adb_bind_config
803
[   60.472900] init: Not bootcharting.
804
[   60.496490] logd.daemon: reinit
805
[   60.498565] init: Service 'logd-reinit' (pid 1134) exited with status 0
806
[   60.951721] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
807
[   60.971282] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 1142) exited with status 0
808
[   60.972839] init: property_set("ro.bt.bdaddr_path", "/efs/bluetooth/bt_addr") failed
809
[   60.975891] init: write_file: Unable to open '/sys/class/input/input3/distortion': No such file or directory
810
[   60.977233] init: write_file: Unable to open '/sys/class/input/input5/distortion': No such file or directory
811
[   60.977844] init: write_file: Unable to open '/sys/class/input/input6/distortion': No such file or directory
812
[   60.980041] init: Starting service 'sysinit'...
813
[   61.003997] init: Starting service 'netd'...
814
[   61.005249] init: Starting service 'debuggerd'...
815
[   61.006347] init: Starting service 'drm'...
816
[   61.007415] init: Starting service 'media'...
817
[   61.008453] init: Starting service 'installd'...
818
[   61.010620] init: Starting service 'keystore'...
819
[   61.011932] init: Starting service 'orientationd'...
820
[   61.013061] init: Starting service 'geomagneticd'...
821
[   61.014190] init: Starting service 'zygote'...
822
[   61.015594] init: Starting service 'gatekeeperd'...
823
[   61.016906] init: Starting service 'perfprofd'...
824
[   61.441650] init: Service 'sysinit' (pid 1143) exited with status 0
825
[   62.119140] set aif2 mode : Slave
826
[   62.142852] set aif2 mode : Master
827
[   66.911224] request_suspend_state: wakeup (0->0) at 66894226077 (2019-02-02 14:24:18.277069092 UTC)
828
[  100.830413] accel_open_calibration: Can't open calibration file
829
[  100.832244] accel_open_calibration: Can't open calibration file
830
[  101.720214] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
831
[  101.720367] lowmemorykiller: oom_adj 0 => oom_score_adj 0
832
[  101.720458] lowmemorykiller: oom_adj 1 => oom_score_adj 58
833
[  101.720581] lowmemorykiller: oom_adj 2 => oom_score_adj 117
834
[  101.720672] lowmemorykiller: oom_adj 3 => oom_score_adj 176
835
[  101.720825] lowmemorykiller: oom_adj 9 => oom_score_adj 529
836
[  101.720886] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
837
[  102.822235] acc_open
838
[  102.822326] acc_release
839
[  102.849456] init: Service 'bootanim' (pid 1117) exited with status 0
840
[  105.729553] SELinux: initialized (dev dm-1, type f2fs), uses xattr
841
[  114.724395] binder: 111:601 transaction failed 29189, size 172-0
842
[  114.902191] binder: 1347:1355 refcount change on invalid ref 99
843
[  125.778930] accel_open_calibration: Can't open calibration file
844
[  128.045501] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
845
[  128.047027] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
846
[  128.049621] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
847
[  131.373199] binder: 1347:1355 refcount change on invalid ref 357
848
[  211.065887] accessory_int gpio stat = 0x1
849
[  211.067932] usb ta_nconnected_irq : VBUS OFF
850
[  211.068756] [BAT_MANAGER] Charger Disconnect
851
[  211.069213] charger_detect_work: cable flag : 0, cable_type : 0
852
[  211.069427] cable detect:TA detach, current device = 0x0010
853
[  211.071990] tsp: No attached cable
854
[  211.135101] 30pin_c: detect: device=4
855
[  211.135314] cable detect:keboard-dock detach, current device = 0x0000
856
[  211.135772] notify_dock_status: status=0
857
[  211.798828] accessory_power: acc_device 0x2, new 1 : OFF
858
[  211.799041] accessory_power: turn off
859
[  211.799102] kbd: switch UART IF to CP
860
[  397.100891] usb ta_nconnected_irq : VBUS ON
861
[  397.102294] [BAT_MANAGER] Charger Connected
862
[  397.685150] adc_check_1 adc=0
863
[  397.695983] adc_check_1 adc=0
864
[  397.707275] adc_check_1 adc=0
865
[  397.717803] adc_check_1 adc=0
866
[  397.729064] adc_check_1 adc=0
867
[  397.729278] check_charger_type: Charger type is [USB], adc = 0
868
[  397.729644] charger_detect_work: cable flag : 1, cable_type : 1
869
[  397.743347] smb347-charger 5-0006: charging current limit set to 0.5A
870
[  397.743774] cable detect:USB attach, current device = 0x0080
871
[  397.743988] espresso_con_usb_charger_attached, USB_EVENT_VBUS
872
[  397.746734] tsp: USB attached
873
[  398.032257] android_work: sent uevent USB_STATE=CONNECTED
874
[  398.040740] android_work: sent uevent USB_STATE=DISCONNECTED
875
[  398.139282] android_work: sent uevent USB_STATE=CONNECTED
876
[  398.142181] android_usb gadget: high speed config #1: android
877
[  398.145263] android_work: sent uevent USB_STATE=CONFIGURED
878
[  398.206939] mtp_open
    (1-1/1)