Replicant

I'm trying to run Replicant 6.0 on Galaxy Nexus (I9250), but the device is stuck on the boot screen after the installation. Originally the smartphone was based on Android 4.0.4. I installed Replicant 6.0 and got this result. Then, I decided to install the latest official Android (4.3) which is available for the device. The installation was very smooth and didn't cause any problems. After that, I repeated my attempt to install Replicant 6.0 but didn't succeed again. Later I successfully installed Replicant 4.2 on the smartphone. Needless to say that after this one more attempt to install Replicant 6.0 on I9250 failed=) I was following the steps described here: https://redmine.replicant.us/projects/replicant/wiki/GalaxyNexusI9250Installation

adb shell dmesg

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.101-replicant (wolfi@machinist) (gcc version 5.4.1 20160919 (15:5.4.1+svn241155-1) ) #1 SMP PREEMPT Sat Sep 9 03:21:24 UTC 2017
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Tuna
[    0.000000] android_display: setting default resolution 720*1280, bpp=4
[    0.000000] android_display: tiler1d 29491200
[    0.000000] android_display: setting fb0.vram to 7864320
[    0.000000] android_display: setting vram to 7864320 at address 0xbea00000
[    0.000000] android_display: ion carveouts: 104726528 tiler2d, 0 nonsecure
[    0.000000] omap4_total_ram_size = 0x40000000
[    0.000000] omap4_smc_size = 0x300000
[    0.000000] omap4_ion_heap_secure_input_size = 0x900000
[    0.000000] omap4_ion_heap_secure_output_wfdhdcp_size = 0x0
[    0.000000] omap4_ducati_heap_size = 0x6900000
[    0.000000] omap4_ion_heap_tiler_mem_size = 0x0
[    0.000000] omap4_ion_heap_nonsec_tiler_mem_size  = 0x0
[    0.000000] omap4_smc_addr = 0xbfd00000
[    0.000000] omap4_ion_heap_secure_input_addr = 0xba300000
[    0.000000] omap4_ion_heap_secure_output_wfdhdcp_addr = 0xba300000
[    0.000000] omap4_ducati_heap_addr = 0xb3a00000
[    0.000000] omap4_ion_heap_tiler_mem_addr = 0xb3a00000
[    0.000000] omap4_ion_heap_nonsec_tiler_mem_addr  = 0xb3a00000
[    0.000000] Reserving CMA IPU + RPMSG region at address = 0xb3800000 with size = 0x7800000
[    0.000000] cma: CMA: reserved 120 MiB at b3800000
[    0.000000] CMA RPMSG region: address = 0xb3a00000, size = 0x8c000
[    0.000000] CMA IPU region: address = 0xb3a8c000, size = 0x7174000
[    0.000000] omap_ion_init: secure_input id=2 [ba300000-bac00000] size=900000
[    0.000000] omap_ion_init: secure_output_wfdhdcp id=5 [ba300000-ba300000] size=0
[    0.000000] omap_ion_init: tiler id=1 [b3a00000-b3a00000] size=0
[    0.000000] omap_ion_init: nonsecure_tiler id=3 [b3a00000-b3a00000] size=0
[    0.000000] omap_ion_init: system id=0 [0-0] size=0
[    0.000000] omap_ion_init: tiler_reservation id=4 [0-0] size=0
[    0.000000] Reserving 8388608 bytes SDRAM for VRAM
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] OMAP4460 ES1.1
[    0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
[    0.000000] On node 0 totalpages: 259584
[    0.000000] free_area_init_node: node 0, pgdat c09580a0, node_mem_map c09e3000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32512 pages, LIFO batch:7
[    0.000000]   HighMem zone: 1792 pages used for memmap
[    0.000000]   HighMem zone: 225024 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 7 pages/cpu @c11ea000 s7744 r8192 d12736 u32768
[    0.000000] pcpu-alloc: s7744 r8192 d12736 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257536
[    0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 mem=1G vmalloc=768M omap_wdt.timer_margin=30 no_console_suspend androidboot.hardware=tuna androidboot.serialno=0149A3510F01B006 androidboot.bootloader=PRIMEMD04 androidboot.baseband=I9250XXLJ1 lcd_bootfb=0xbea70000 mms_ts.panel_id=18 androidboot.macaddr=
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 512MB 488MB 14MB = 1014MB total
[    0.000000] Memory: 889336k/889336k available, 159240k reserved, 784384K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
[    0.000000]     vmalloc : 0xc8800000 - 0xf8000000   ( 760 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .init : 0xc0008000 - 0xc0068000   ( 384 kB)
[    0.000000]       .text : 0xc0068000 - 0xc08f0000   (8736 kB)
[    0.000000]       .data : 0xc08f0000 - 0xc095a400   ( 425 kB)
[    0.000000]        .bss : 0xc095a424 - 0xc09e2cf0   ( 547 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:410
[    0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000061] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
[    0.023498] pid_max: default: 32768 minimum: 301
[    0.070648] Security Framework initialized
[    0.070678] SELinux:  Initializing.
[    0.070678] SELinux:  Starting in permissive mode
[    0.070770] Mount-cache hash table entries: 512
[    0.070770] Initializing cgroup subsys debug
[    0.071838] Initializing cgroup subsys cpuacct
[    0.071899] Initializing cgroup subsys memory
[    0.071899] Initializing cgroup subsys freezer
[    0.071899] Initializing cgroup subsys bfqio
[    0.072052] CPU: Testing write buffer coherency: ok
[    0.072052] ftrace: allocating 23423 entries in 69 pages
[    0.099975] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.100128] L310 cache controller enabled
[    0.100128] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
[    0.178161] CPU1: Booted secondary processor
[    0.209411] Brought up 2 CPUs
[    0.209411] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
[    0.209686] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
[    0.213470] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
[    0.213470] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
[    0.213500] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
[    0.213500] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
[    0.213531] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
[    0.213531] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
[    0.213562] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
[    0.213562] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
[    0.213592] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
[    0.213592] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermal_sensor
[    0.213775] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
[    0.214019] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[    0.214019] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
[    0.217193] _omap4_module_wait_ready: Timeout waiting for module enable (mcpdm_fck: clkctrl = 0x30002)
[    0.222106] omap_hwmod: mcpdm: cannot be enabled (3)
[    0.224395] print_constraints: dummy: 
[    0.225006] NET: Registered protocol family 16
[    0.225006] GPMC revision 6.0
[    0.231140] EMIF0 is enabled with IRQ142
[    0.231140] EMIF1 is enabled with IRQ143
[    0.232421] Last reset was warm software reset (PRM_RSTST=0x2)
[    0.232452] HSI: device registered as omap_hwmod: hsi
[    0.232818] OMAP GPIO hardware version 0.1
[    0.233886] omap_mux_init: Add partition: #1: core, flags: 2
[    0.235565] omap_mux_init: Add partition: #2: wkup, flags: 2
[    0.235809] Tuna HW revision: 09 (Maguro 8th Sample), cpu OMAP4460 ES1.1 
[    0.237823] Using 
[    0.241241] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio102
[    0.241516] omap_mux_init_gpio: Could not set gpio102
[    0.241973] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio101
[    0.241973] omap_mux_init_gpio: Could not set gpio101
[    0.242218] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio100
[    0.242218] omap_mux_init_gpio: Could not set gpio100
[    0.242248] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.242889] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
[    0.242889] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.247741] OMAP DMA hardware revision 0.0
[    0.248443] omap_rproc_get_pool: carveout memory is unavailable: 0x0, 0x0
[    0.257690] bio: create slab <bio-0> at 0
[    0.258514] print_constraints: vwl1271: 2000 mV 
[    0.258514] i2c-core: driver [twl] using legacy suspend method
[    0.258880] i2c-core: driver [twl] using legacy resume method
[    0.258880] SCSI subsystem initialized
[    0.260192] usbcore: registered new interface driver usbfs
[    0.260192] usbcore: registered new interface driver hub
[    0.260650] usbcore: registered new device driver usb
[    0.260711] i2c-gpio i2c-gpio.5: using pins 98 (SDA) and 99 (SCL)
[    0.261962] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
[    0.261962] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[    0.266204] twl6030: PIH (irq 39) chaining IRQs 368..387
[    0.268341] print_constraints: VUSB: 3300 mV normal standby
[    0.268981] print_constraints: VMMC: 1800 mV normal standby
[    0.269683] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[    0.269683] print_constraints: VUSIM: 2200 mV normal standby
[    0.269683] print_constraints: VCXIO: 1800 mV normal standby
[    0.269683] print_constraints: VDAC: 1800 mV normal standby
[    0.271606] print_constraints: VAUX1_6030: 3000 mV normal standby
[    0.272399] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
[    0.272796] print_constraints: VAUX3_6030: 3100 mV normal standby
[    0.273651] print_constraints: VDD3: 
[    0.274444] print_constraints: VMEM: at 1250 mV 
[    0.275207] print_constraints: V2V1: 2100 mV normal standby
[    0.276000] print_constraints: VANA: 2100 mV normal standby
[    0.276885] print_constraints: CLK32KG: 
[    0.277709] print_constraints: CLK32KAUDIO: 
[    0.277923] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
[    0.278259] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
[    0.278594] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
[    0.279693] omap-rproc omap-rproc.0: dsp is available
[    0.279693] omap-rproc omap-rproc.1: ipu is available
[    0.279693] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.280212] Bluetooth: Core ver 2.16
[    0.280212] NET: Registered protocol family 31
[    0.280212] Bluetooth: HCI device and connection manager initialized
[    0.281005] Bluetooth: HCI socket layer initialized
[    0.281036] Bluetooth: L2CAP socket layer initialized
[    0.281036] Bluetooth: SCO socket layer initialized
[    0.281494] cfg80211: Calling CRDA to update world regulatory domain
[    0.281677] Switching to clocksource 32k_counter
[    0.287506] Switched to NOHz mode on CPU #0
[    0.287536] Switched to NOHz mode on CPU #1
[    0.301300] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
[    0.304199] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.304260] musb-hdrc: MHDRC RTL version 2.0 
[    0.304290] musb-hdrc: setup fifo_mode 4
[    0.304290] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    0.304321] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
[    0.304870] NET: Registered protocol family 2
[    0.305023] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.306304] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.306304] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[    0.306671] TCP: Hash tables configured (established 16384 bind 16384)
[    0.306671] TCP reno registered
[    0.307037] UDP hash table entries: 128 (order: 0, 4096 bytes)
[    0.307067] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[    0.307281] NET: Registered protocol family 1
[    0.307281] Trying to unpack rootfs image as initramfs...
[    0.579620] Freeing initrd memory: 3516K
[    1.064941] PHOENIX_LAST_TURNOFF_STS: 0x01
[    1.065521] console [ttyFIQ0] enabled
[    1.065521] Registered FIQ tty driver c7908b40
[    1.070465] ram_console: got buffer at a0000000, size 200000
[    1.070465] ram_console: found existing buffer, size 264071, start 264071
[    1.741424] console [ram-1] enabled
[    1.751464] omap-iommu omap-iommu.0: ducati registered
[    1.751922] omap-iommu omap-iommu.1: tesla registered
[    1.751922] audit: initializing netlink socket (disabled)
[    1.752960] type=2000 audit(1.726:1): initialized
[    1.754119] highmem bounce pool size: 64 pages
[    1.771881] NTFS driver 2.1.30 [Flags: R/O].
[    1.772705] fuse init (API version 7.16)
[    1.772705] msgmni has been set to 451
[    1.773834] SELinux:  Registering netfilter hooks
[    1.776702] io scheduler noop registered
[    1.776763] io scheduler deadline registered
[    1.777038] io scheduler cfq registered (default)
[    1.777038] io scheduler bfq registered
[    1.777679] BFQ I/O-scheduler: v7r8
[    1.778656] OMAP DSS rev 4.0
[    1.781097] Keyboard driver not present
[    1.782257] dsscomp: initializing.
[    1.782257] misc dsscomp: display0=s6e8aa0
[    1.782562] misc dsscomp: display1=hdmi_panel
[    1.782562] misc dsscomp: found 2 displays and 4 overlays, WB overlay 1
[    1.783325] could not allocate slot
[    1.794921] omap-rproc omap-rproc.1: powering up ipu
[    1.795410] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
[    1.796203] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
[    1.796203] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[    1.797546] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[    1.797821] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[    1.799011] omap_ion_probe: adding heap secure_input of type 2 with ba300000@900000
[    1.799011] omap_ion_probe: adding heap secure_output_wfdhdcp of type 2 with ba300000@0
[    1.799011] omap_ion_probe: adding heap tiler of type 4 with b3a00000@0
[    1.799591] omap_ion_probe: adding heap nonsecure_tiler of type 4 with b3a00000@0
[    1.799896] omap_ion_probe: adding heap system of type 0 with 0@0
[    1.799896] omap_ion_probe: adding heap tiler_reservation of type 5 with 0@0
[    1.806152] brd: module loaded
[    1.806152] loop: module loaded
[    1.806152] zram: Created 1 device(s) ...
[    1.812072] input: barometer as /devices/virtual/input/input0
[    1.812072] sec_jack_probe : Registering jack driver
[    1.813415] i2c i2c-4: mpu_probe: 0
[    1.847076] i2c i2c-4: Installing irq using 205
[    1.847320] i2c i2c-4: Module Param interface = mpuirq
[    1.847320] i2c-core: driver [mpu3050] using legacy suspend method
[    1.847869] i2c-core: driver [mpu3050] using legacy resume method
[    1.847869] mpu_init: Probe name mpu3050
[    1.847991] i2c i2c-4: bma250_mod_probe: bma250
[    1.848419] i2c i2c-4: Installing Accel irq using 282
[    1.872863] i2c i2c-4: mpu3050: +bma250
[    1.872863] bma250_mod_init: Probe name bma250_mod
[    1.872863] i2c i2c-4: yas530_mod_probe: yas530
[    1.872863] i2c i2c-4: Installing Compass irq using 336
[    1.895477] i2c i2c-4: mpu3050: +yas530
[    1.895477] yas530_mod_init: Probe name yas530_mod
[    1.902313] omap_temp_sensor omap_temp_sensor.0: omap_temp_sensor probed
[    1.903625] colorcontrol_init misc_register(colorcontrol)
[    1.912963] m25p80 spi3.0: w25q80 (1024 Kbytes)
[    1.914093] PPP generic driver version 2.4.2
[    1.914459] PPP Deflate Compression module registered
[    1.914550] PPP BSD Compression module registered
[    1.915618] PPP MPPE Compression module registered
[    1.915740] NET: Registered protocol family 24
[    1.918914] tun: Universal TUN/TAP device driver, 1.6
[    1.919036] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.919403] usbcore: registered new interface driver asix
[    1.919555] usbcore: registered new interface driver cdc_ether
[    1.919799] usbcore: registered new interface driver net1080
[    1.919952] usbcore: registered new interface driver cdc_subset
[    1.920196] usbcore: registered new interface driver zaurus
[    1.920318] cdc_ncm: 04-Aug-2011
[    1.920471] usbcore: registered new interface driver cdc_ncm
[    1.920715] usbcore: registered new interface driver ath9k_htc
[    1.920806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.921295] usbcore: registered new interface driver cdc_acm
[    1.921386] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.921569] Initializing USB Mass Storage driver...
[    1.921844] usbcore: registered new interface driver usb-storage
[    1.921936] USB Mass Storage support registered.
[    1.922180] usbcore: registered new interface driver usbserial
[    1.922363] usbserial: USB Serial Driver core
[    1.924163] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    1.924377] android_usb gadget: Number of LUNs=1
[    1.924468]  lun0: LUN: removable file: (no medium)
[    1.925079] android_usb gadget: android_usb ready
[    1.925170] musb-hdrc musb-hdrc: MUSB HDRC host driver
[    1.925445] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
[    1.925659] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.925872] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.926055] usb usb1: Product: MUSB HDRC host driver
[    1.926147] usb usb1: Manufacturer: Linux 3.0.101-replicant musb-hcd
[    1.926330] usb usb1: SerialNumber: musb-hdrc
[    1.927062] hub 1-0:1.0: USB hub found
[    1.927185] hub 1-0:1.0: 1 port detected
[    1.928070] usbcore: registered new interface driver xpad
[    1.928253] usbcore: registered new interface driver usb_acecad
[    1.928436] acecad: v3.2:USB Acecad Flair tablet driver
[    1.928588] usbcore: registered new interface driver aiptek
[    1.928771] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
[    1.928863] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
[    1.929107] usbcore: registered new interface driver gtco
[    1.929229] GTCO usb driver version: 2.00.0006
[    1.929473] usbcore: registered new interface driver hanwang
[    1.929718] usbcore: registered new interface driver kbtab
[    1.929870] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[    1.930053] usbcore: registered new interface driver wacom
[    1.930236] wacom: v1.52:USB Wacom tablet driver
[    1.930664] input: Melfas MMSxxx Touchscreen as /devices/platform/omap/omap_i2c.3/i2c-3/3-0048/input/input1
[    2.306549] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
[    2.306915] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
[    2.307250] input: tuna-gpio-keypad as /devices/virtual/input/input2
[    2.308227] input: proximity as /devices/virtual/input/input3
[    2.308837] input: lightsensor-level as /devices/virtual/input/input4
[    2.312957] using rtc device, twl_rtc, for alarms
[    2.313171] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[    2.313507] i2c /dev entries driver
[    2.314361] dmm: probe base: fd300000, irq 145
[    2.317840] max17040 4-0036: MAX17040 Fuel-Gauge Ver 3
[    2.320343] OMAP Watchdog Timer Rev 0x01: initial timeout 30 sec
[    2.322631] device-mapper: uevent: version 1.0.3
[    2.323242] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    2.323760] Bluetooth: HCI UART driver ver 2.2
[    2.323883] Bluetooth: HCI H4 protocol initialized
[    2.324188] cpuidle: using governor ladder
[    2.324279] cpuidle: using governor menu
[    2.330902] usbcore: registered new interface driver usbhid
[    2.331085] usbhid: USB HID core driver
[    2.331726] ashmem: initialized
[    2.332824] OMAP HSI: HSI driver version 0.4.3
[    2.333129] omap_hsi omap_hsi.0: Registering IRQ hsi_p1_mpu (99)
[    2.333251] omap_hsi omap_hsi.0: HSI port 1 initialized
[    2.333435] omap_hsi omap_hsi.0: Registering IRQ hsi_dma_mpu (103)
[    2.333679] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
[    2.335266] omap_hsi omap_hsi.0: Cannot set HSI FClk to default value: 96000000. Will retry on next open
[    2.339538] Tuna ASoC init
[    2.345428] twl6040-codec twl6040-codec: couldn't get VDDHF regulator -19
[    2.374786] asoc: null-codec-dai <-> MultiMedia1 mapping ok
[    2.376373] asoc: null-codec-dai <-> MultiMedia2 mapping ok
[    2.379272] asoc: null-codec-dai <-> Voice mapping ok
[    2.380859] asoc: null-codec-dai <-> Tones mapping ok
[    2.382476] asoc: null-codec-dai <-> Vibra mapping ok
[    2.383575] asoc: null-codec-dai <-> MODEM mapping ok
[    2.384582] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
[    2.386718] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[    2.388214] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
[    2.389831] asoc: dit-hifi <-> omap-mcasp-dai mapping ok
[    2.392822] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
[    2.394317] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[    2.395446] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[    2.396484] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[    2.397491] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[    2.398651] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[    2.399719] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[    2.401000] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[    2.402099] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
[    2.403259] asoc: null-codec-dai <-> omap-abe-vxrec-dai mapping ok
[    2.405639] input: Tuna Headset Jack as /devices/platform/soc-audio/sound/card0/input5
[    2.411437] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
[    2.412170] ALSA device list:
[    2.412261]   #0: TI OMAP4 Board
[    2.412353]   #1: OMAP4HDMI
[    2.412597] GACT probability NOT on
[    2.412780] Mirror/redirect action on
[    2.412872] u32 classifier
[    2.412963]     Actions configured
[    2.413146] Netfilter messages via NETLINK v0.30.
[    2.413330] nf_conntrack version 0.5.0 (15870 buckets, 63480 max)
[    2.415161] ctnetlink v0.93: registering with nfnetlink.
[    2.415313] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    2.415496] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    2.416137] xt_time: kernel timezone is -0000
[    2.418945] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.419219] arp_tables: (C) 2002 David S. Miller
[    2.419372] TCP bic registered
[    2.419555] TCP cubic registered
[    2.419647] TCP westwood registered
[    2.419769] TCP htcp registered
[    2.419921] Initializing XFRM netlink socket
[    2.421356] NET: Registered protocol family 10
[    2.430541] Mobile IPv6
[    2.430786] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.431274] IPv6 over IPv4 tunneling driver
[    2.438812] NET: Registered protocol family 17
[    2.439178] NET: Registered protocol family 15
[    2.439910] Bluetooth: RFCOMM TTY layer initialized
[    2.440216] Bluetooth: RFCOMM socket layer initialized
[    2.440399] Bluetooth: RFCOMM ver 1.11
[    2.440521] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.440765] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.441040] NET: Registered protocol family 35
[    2.442016] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    2.442230] ThumbEE CPU extension supported.
[    2.442443] Registering SWP/SWPB emulation handler
[    2.442535] Registering SDIV/UDIV emulation handler
[    2.445251] mmc0: new high speed MMC card at address 0001
[    2.445800] mmcblk0: mmc0:0001 VYL00M 14.6 GiB 
[    2.446166] mmcblk0boot0: mmc0:0001 VYL00M partition 1 512 KiB
[    2.446441] mmcblk0boot1: mmc0:0001 VYL00M partition 2 512 KiB
[    2.451843] Reprogramming LPDDR2 timings to 400000000 Hz
[    2.452301] sr_init: No PMIC hook to init smartreflex
[    2.452697] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    2.452880]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
[    2.453002] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    2.453155] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
[    2.453582] SmartReflex class 1.5 driver: initialized (86400000ms)
[    2.454345] Power Management for TI OMAP4.
[    2.454681] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L4_PER/CFG and L3_1.
[    2.456054]  mmcblk0boot1: unknown partition table
[    2.457122]  mmcblk0boot0: unknown partition table
[    2.458679] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:0 (mask:ff)
[    2.458892] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:1 (mask:ff)
[    2.459136] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:2 (mask:ff)
[    2.459411] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:3 (mask:ff)
[    2.459686] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:4 (mask:ff)
[    2.459930] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:5 (mask:ff)
[    2.460113] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:6 (mask:ff)
[    2.460388] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:7 (mask:ff)
[    2.481781] clock: disabling unused clocks to save power
[    2.483337] cannot apply mgr(lcd) on inactive device
[    2.483581] omapfb omapfb: failed to apply dispc config
[    2.483703] cannot apply mgr(tv) on inactive device
[    2.483886] omapfb omapfb: failed to apply dispc config
[    2.484008] cannot apply mgr(lcd2) on inactive device
[    2.484222] omapfb omapfb: failed to apply dispc config
[    2.485900] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1203000 Calib=1020000 margin=0
[    2.487884] regulator_init_complete: VAUX2_6030: disabling
[    2.488769] regulator_init_complete: VDAC: disabling
[    2.489715] regulator_init_complete: VPP: disabling
[    2.490509] regulator_init_complete: VUSB: disabling
[    2.492156] fsa9480 4-0025: cable detect change, from 'unknown/none' to 'usb-peripheral'
[    2.494476] twl_rtc twl_rtc: setting system clock to 2017-11-29 18:47:42 UTC (1511981262)
[    2.495544] Freeing init memory: 384K
[    2.498779] init: init started!
[    2.507080] SELinux: 2048 avtab hash slots, 5397 rules.
[    2.509490] sr_class1p5_calib_work: core: Calibration complete: Voltage:Nominal=1127000 Calib=1063480 margin=13000
[    2.511108] SELinux: 2048 avtab hash slots, 5397 rules.
[    2.511291] SELinux:  1 users, 2 roles, 575 types, 0 bools, 1 sens, 1024 cats
[    2.511535] SELinux:  87 classes, 5397 rules
[    2.513793] SELinux:  Completing initialization.
[    2.513885] SELinux:  Setting up existing superblocks.
[    2.514068] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    2.514190] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    2.514739] SELinux: initialized (dev bdev, type bdev), not configured for labeling
[    2.514892] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    2.515014] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.515197] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    2.533081] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    2.533203] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    2.533325] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
[    2.533447] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    2.533508] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    2.533691] SELinux: initialized (dev mtd_inodefs, type mtd_inodefs), not configured for labeling
[    2.533813] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[    2.533874] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.533996] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    2.540588] sr_class1p5_calib_work: iva Stop sampling: Voltage Nominal=950000 samples=17
[    2.540740] sr_class1p5_calib_work: iva: Calibration complete: Voltage:Nominal=950000 Calib=860920 margin=13000
[    2.548339] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1380000 Calib=1240000 margin=0
[    2.657562] type=1403 audit(1511981262.648:2): policy loaded auid=4294967295 ses=4294967295
[    2.659027] type=1404 audit(1511981262.656:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    2.681213] sr_class1p5_calib_work: core Stop sampling: Voltage Nominal=962000 samples=12
[    2.681549] sr_class1p5_calib_work: core: Calibration complete: Voltage:Nominal=962000 Calib=886240 margin=38000
[    2.681884] sr_class1p5_calib_work: mpu Stop sampling: Voltage Nominal=1025000 samples=12
[    2.682312] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1025000 Calib=840000 margin=10000
[    2.869232] init: (Initializing SELinux enforcing took 0.37s.)
[    2.896514] init: init second stage started!
[    2.947174] init: waitpid failed: No child processes
[    2.949493] init: (Loading properties from /default.prop took 0.00s.)
[    2.950408] init: could not import file '/init.recovery.tuna.rc' from '/init.rc'
[    2.950500] init: (Parsing /init.rc took 0.00s.)
[    2.950683] init: Starting service 'ueventd'...
[    2.951232] init: Starting service 'healthd'...
[    2.951690] init: Waiting for /dev/.coldboot_done...
[    2.953125] ueventd: ueventd started!
[    2.954071] type=1400 audit(1511981262.945:4): avc:  denied  { write } for  pid=98 comm="healthd" name="/" dev=tmpfs ino=3084 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[    3.189697] ueventd: Coldboot took 0.23s.
[    3.193695] init: Waiting for /dev/.coldboot_done took 0.24s.
[    3.193847] init: /dev/hw_random not found
[    3.194976] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    3.195465] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    3.196166] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    3.196533] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    3.196838] init: /dev/hw_random not found
[    3.198089] android_usb: already disabled
[    3.198364] init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
[    3.198760] init: (Loading properties from /system/build.prop took 0.00s.)
[    3.198822] init: (Loading properties from /vendor/build.prop took 0.00s.)
[    3.198974] init: (Loading properties from /factory/factory.prop took 0.00s.)
[    3.201019] init: (Loading properties from /data/local.prop took 0.00s.)
[    3.201141] init: Unable to open persistent property directory "/data/property": No such file or directory
[    3.202148] mms_ts 3-0048: could not find firmware file 'melfas/mms144_ts_rev32.fw'
[    3.202362] init: Starting service 'recovery'...
[    3.202362] mms_ts 3-0048: Melfas MMS-series touch controller initialized
[    3.202972] init: Starting service 'vold'...
[    3.203552] init: Starting service 'setup_adbd'...
[    3.234863] HDCP: failed to load keys
[    3.264282] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducati-m3.bin
[    4.013763] EXT4-fs (mmcblk0p11): recovery complete
[    4.024230] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[    4.024780] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[    4.839721] EXT4-fs (mmcblk0p12): recovery complete
[    4.843597] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[    4.843963] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
[    4.846954] init: property_set("ro.adb.secure", "1") failed
[    4.924682] android_usb: already disabled
[    4.924865] init: Starting service 'adbd'...
[    4.925781] init: Service 'setup_adbd' (pid 107) exited with status 0
[    4.931243] adb_open
[    4.931335] adb_bind_config
[    5.210815] android_work: sent uevent USB_STATE=CONNECTED
[    5.216400] android_work: sent uevent USB_STATE=DISCONNECTED
[    5.323333] s6e8aa: d/b 1, p 1, b-01390ffb
[    5.323364] s6e8aa: c0, 1, b-002534a4, got v 3478937, factory wants 3473578
[    5.323394] s6e8aa: c1, 1, b-009e8c2f, got v 3665117, factory wants 3656475
[    5.323425] s6e8aa: c2, 1, b-001e4083, got v 3450329, factory wants 3444779
[    5.323455] s6e8aa: d/b 1, p 2, b-044d7cf9
[    5.323455] s6e8aa: c0, 2, b-00817623, got v 3372947, factory wants 3366695
[    5.323486] s6e8aa: c1, 2, b-01442e4d, got v 3571579, factory wants 3562040
[    5.323516] s6e8aa: c2, 2, b-006568a3, got v 3345117, factory wants 3338148
[    5.323547] s6e8aa: d/b 1, p 3, b-0b323808
[    5.323577] s6e8aa: c0, 3, b-01fd59de, got v 3226441, factory wants 3218148
[    5.323608] s6e8aa: c1, 3, b-036cbfe3, got v 3424541, factory wants 3413696
[    5.323608] s6e8aa: c2, 3, b-01997335, got v 3187283, factory wants 3177961
[    5.323638] s6e8aa: d/b 1, p 4, b-186611f4
[    5.323669] s6e8aa: c0, 4, b-05636b32, got v 3087303, factory wants 3076052
[    5.323699] s6e8aa: c1, 4, b-07c7d5c6, got v 3280990, factory wants 3267763
[    5.323730] s6e8aa: c2, 4, b-0472d16b, got v 3034079, factory wants 3021754
[    5.323760] s6e8aa: d/b 1, p 5, b-6840e4ff
[    5.323760] s6e8aa: c0, 5, b-21371059, got v 2695957, factory wants 2675571
[    5.323791] s6e8aa: c1, 5, b-2a0869e4, got v 2866252, factory wants 2842944
[    5.323822] s6e8aa: c2, 5, b-1b930982, got v 2614162, factory wants 2592723
[    5.323852] s6e8aa: d/b 1, p 6, b-ffffffff
[    5.323883] s6e8aa: c0, 6, b-59b1b4d2, got v 2325286, factory wants 2292333
[    5.323913] s6e8aa: c1, 6, b-6e067e3d, got v 2468073, factory wants 2430333
[    5.323944] s6e8aa: c2, 6, b-4efd2a80, got v 2197307, factory wants 2162000
[    5.359283] android_work: sent uevent USB_STATE=CONNECTED
[    5.362030] android_usb gadget: high speed config #1: android
[    5.362213] android_work: sent uevent USB_STATE=CONFIGURED
[    6.721191] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[    6.721557] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[   16.446807] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1317000 Calib=1100000 margin=0
[   16.564819] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[   16.564941] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[   19.654205] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[   19.654327] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
[   19.757995] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[   19.758514] SELinux: initialized (dev mmcblk0p12, type ext4), uses mountpoint labeling
[   20.307556] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[   20.307952] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[   24.007873] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[   24.008666] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[   49.385253] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[   49.385437] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[   51.532867] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[   51.532958] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[   62.231964] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[   62.232086] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[   71.904632] init: Service 'adbd' is being killed...
[   71.904693] adb_release
[   71.905456] init: Service 'adbd' (pid 118) killed by signal 9
[   71.905609] init: Service 'adbd' (pid 118) killing any children in process group
[   71.931243] adb_open
[   71.931365] adb_bind_config
[   72.161346] android_work: sent uevent USB_STATE=DISCONNECTED
[   72.279846] android_work: sent uevent USB_STATE=CONNECTED
[   72.285400] android_work: sent uevent USB_STATE=DISCONNECTED
[   72.427947] android_work: sent uevent USB_STATE=CONNECTED
[   72.431030] android_usb gadget: high speed config #1: android
[   72.431579] android_work: sent uevent USB_STATE=CONFIGURED
[   94.461151] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   94.979553] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[   94.979919] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[  203.428253] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: 
[  203.428649] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
[  203.448181] omapfb omapfb: Unknown ioctl 0x5401
[  205.649658] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc
[  205.649841] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
[  498.484008] adb_release
[  498.486633] android_usb: already enabled
[  498.487487] init: Starting service 'adbd'...
[  498.497253] adb_open
[  498.497436] adb_bind_config
[  498.709228] android_work: sent uevent USB_STATE=DISCONNECTED
[  498.828369] android_work: sent uevent USB_STATE=CONNECTED
[  498.833068] android_work: sent uevent USB_STATE=DISCONNECTED
[  498.975524] android_work: sent uevent USB_STATE=CONNECTED
[  498.977020] android_usb gadget: high speed config #1: android
[  498.977386] android_work: sent uevent USB_STATE=CONFIGURED