Project

General

Profile

Note 2 with new Replicant 4.2 Installation - Sensors

Added by Taylor Gunnoe almost 10 years ago

The sensors on my Replicant Note 2 don't seem to work. I havent seen any guides here where to fix the sensors, and the status page says they work. So I am assuming that I am missing something. I cant get autorotate/autodim and other functionality out of the device.


Replies (6)

RE: Note 2 with new Replicant 4.2 Installation - Sensors - Added by Paul Kocialkowski almost 10 years ago

It works perfectly on mine. Try installing Sensors Readout, play with it and send me a main log: GettingLogs

RE: Note 2 with new Replicant 4.2 Installation - Sensors - Added by Paul Kocialkowski almost 10 years ago

Are you sure your device is a Note 2? There is an issue with sensors on the Galaxy Note N7000 that will be fixed with the next images release.

RE: Note 2 with new Replicant 4.2 Installation - Sensors - Added by Taylor Gunnoe almost 10 years ago

Yes, I have the GT-N7100 model. Ive already tried Sensors Readout, but on every one of them it only says "waiting for sensors to become ready". I'll get back to with the logs this evening. Thanks!!

RE: Note 2 with new Replicant 4.2 Installation - Sensors - Added by Paul Kocialkowski almost 10 years ago

That looks like a problem with sensors indeed. Waiting for your logs then. dmesg might be useful too.

RE: Note 2 with new Replicant 4.2 Installation - Sensors - Added by Taylor Gunnoe almost 10 years ago

I ran both logcat main and dmesg in terminal and attached results. I couldnt get much useful out of alogcat and my adb wasn't set up properly, so I hope this is enough.

replicant-terminal.txt (130 KB) replicant-terminal.txt terminal emulator output

RE: Note 2 with new Replicant 4.2 Installation - Sensors - Added by Paul Kocialkowski almost 10 years ago

This doesn't show enough, sorry. Please get logcat from adb: GettingLogs :) And do it after trying to play with the sensors (preferably, after a clean reboot too).

    (1-6/6)