Project

General

Profile

Animated Replicant boot logo [tested @ Replicant 4.2]

Added by My Self over 5 years ago

I decided to make two animated boot logos for Replicant.

CAUTION: The current attached files have two little bugs, (a frameskip- and transparency problem) and have to be replaced;
the following two previews are from the updated upcoming versions. This post will be updated as soon as I get a little help from an admin on this forum.

Cycle v0.2: < > Roots v0.1

First of all I have to say, I'm neither a designer, nor a developer, and that is my very first bootanimation try and also my very first contact with .svg files.
I created my first zero-version with GIMP. Now I've made next zero-version with Inkscape.

The (unspectacular) circle 'animation' is inspired by the boot animation of CyanogenMod 11 (https://www.youtube.com/watch?v=cgnzNNPVaCA#t=0m52s).
I thought that's some kind of tribute to the roots of Replicant.

I made a square to be compatible to the (not used/implemented yet) feature of boot animation rotation; this is why the the overall appearance is smaller.

The 'bootanimation.zip' (= 480x480 pixel) is attached. Just replace that with the existing one under: /system/media/bootanimation.zip
Also I've attached a flashable 'bootlogo_replacement.zip', which replaces the bootanimation.zip smoothly :)

The basic Replicant graphics are fetched from: http://redmine.replicant.us/projects/replicant/wiki/ReplicantArtwork
And the type font from: https://www.theleagueofmoveabletype.com/league-gothic
(By the way, you should have installed that font on your system if you want to generate the image season out of the .svg files).

[UPDATE]
I've created a display resolution table of the supported (and not supported, yet) devices:
Supported Device Product code Display resolution suitable [Cycle] logo pack
Nexus S I902x 480 x 800 pixel 480x480
Galaxy S I9000 480 x 800 pixel 480x480
Galaxy S 2 I9100 480 x 800 pixel 480x480
Galaxy Note N7000 800 x 1.280 pixel 800x800
Galaxy Nexus I9250 720 x 1.280 pixel 720x720
Galaxy Tab 2 7.0 P3100 600 x 1.024 pixel 600x600
Galaxy Tab 2 7.0 Wi-Fi P3110 600 x 1.024 pixel 600x600
Galaxy Tab 2 10.1 P5100 800 x 1.280 pixel 800x800
Galaxy Tab 2 10.1 Wi-Fi P5110 800 x 1.280 pixel 800x800
Galaxy S 3 I9300 720 x 1.280 pixel 720x720
Galaxy Note 2 N7100 720 x 1.280 pixel 720x720
Goldelico GTA04 GTA04 480 x 640 pixel 480x480
LG Optimus Black P970 480 x 800 pixel 480x480
Neo900 Neo900 800 x 480 pixel 480x480

Out of that table you'll get the fitting bootanimation-resolution for your device.

Overview of the attached flashable zip files:
  • 480x480 = 'bootlogo_replacement.zip'
  • 600x600 = 'bootlogo_repl_600x600.zip'
  • 720x720 = 'bootlogo_repl_720x720.zip'
  • 800x800 = 'bootlogo_repl_800x800.zip'

Finally I've attached the .svg files as 'bootlogo_svg.zip'.

Hope you like it...

LICENSE:

Original work: Copyright 2011 Mirella Vedovetto
Modified work: Copyright 2011 Paul Kocialkowski
Animated work: Copyright 2014 Moritz Bandemer

This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.

fallback note
Don't be afraid; if you want to set the changes back to default (behavior), just "install" the Replicant .zip file (over CWM Recovery) again.
Over this way you don't lose any personal data or settings you made - even on encrypted devices.

disclaimer
Please don't make me responsible for any harm to your device(s). I've researched and tested very carefully,
but if you want to try this at home, please proceed at your own risk.

Any suggestions or comments are appreciated!


Replies (4)

RE: Animated Replicant boot logo [tested @ Replicant 4.2] - Added by tdlnx _ about 4 years ago

I just installed this on my Galaxy S2 and it looks great! Good work!

RE: Animated Replicant boot logo [tested @ Replicant 4.2] - Added by Wolfgang Wiedmeyer over 2 years ago

Thanks for creating these animations! Replicant 6.0 needs a boot animation! :)

I created a feature request for it, so this gains traction: #1797. Feel free to make suggestions there!

RE: Animated Replicant boot logo [tested @ Replicant 4.2] - Added by Markus Gellrich almost 2 years ago

Hello,

I totally appreciate replicant and am thankful for its existence.

I'd like to contribute with some artwork, so I redesigned the logo form scratch as a 3d model.
If someone is interested in the raw files, just ask me and I will put them here.
Nothing of it is published yet.

Here's a rendered image, suitable as logo:
red replicant with black roller-skates
LICENSE:

Original work: Copyright 2011 Mirella Vedovetto
Modified work: Copyright 2011 Paul Kocialkowski
Adapted work: Copyright 2018 Markus Gellrich

This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.

replicant-nobg-256.png (11.5 KB) replicant-nobg-256.png red replicant with black roller-skates

RE: Animated Replicant boot logo [tested @ Replicant 4.2] - Added by wellton costa almost 2 years ago

muito bom o bootanimation, estou usando em meu replicant =) obrigado e parabéns.

(foi em portugues-BR, desculpem)

    (1-4/4)