36C3¶

Presentations¶

All presentations are available at the Presentations page, alongside with slide-decks and videos (if available).

Hardware to bring¶

Devices¶

Good practices:

• It would be a good idea to put your name on a sticker somewhere on the device if possible

Person	Hardware	Comments	Usage
GNUtoo	Galaxy SIII (I9300) with the stock bootloader	Please don't reflash the bootloader or unusual partitions (EFS, etc)	Can run Replicant 6.0 => Can be lent or used for demos
	Galaxy SIII (I9300) with the stock (signed) OS	Please don't reflash the bootloader or unusual partitions (EFS, etc)	Will be used for demos at the stand: We will monitor what is transmited on the network
	Galaxy SIII (I9300) with u-boot	Please don't reflash the modem partitions (EFS, MODEM)	Can run Replicant 9 and GNU/Linux
	Other Replicant 6.0 compatible phones: Galaxy SII Galaxy Nexus Galaxy Note	Please don't reflash the bootloader or unusual partitions (EFS, etc)	Lend them to be able to communicate through the 36C3 phone network

Debug utilities¶

Person	Hardware	Comments	Usage
GNUtoo	Serial port cable with variable resistors		Needed for Replicant 9 or GNU/Linux
	Screwdriver		Needed by dllud
	Multimeter		Can debug the serial cable if necessary
	Simtrace 1: Can get the dialog between the modem and the SIM card in wireshark	simtrace packaged in Parabola, please do not reflash or trigger the erase jumper (requires old compiler to recompile the firmware)	Do we do demos with it ?
	SIM card that is not recognized in Replicant (STK related?)		Testing
	SIM card + phone that can trigger the audio call issue		Testing
	5 CCC Camp 2019 SIM cards	I've the ADM1 PIN and such if you want to play with it, but I don't have good transportable smartcard reader (only bad transportable or good not transportable)	Will be lent to use the 36C3 phone network

Other:¶

Person	Hardware	Comments	Usage
GNUtoo	Blank stickers for labeling the hardware		* Put your name, table, and contact information on the hardware you lend to more easily find you when we need to give it back to you * Put constraints and usage notes on hardware (pinout, settings, what not to reflash)
FSF	Replicant stickers		Giving some to the attendees