Project

General

Profile

Actions

BackupsResearch » History » Revision 17

« Previous | Revision 17/25 (diff) | Next »
Denis 'GNUtoo' Carikli, 06/08/2020 06:42 PM
fix the link and commands for the old instructions


BackupsResearch

Introduction

The BackupTheEFS page has instructions to backup the EFS. This page instead tries to document why it is done in that way, and what are the advantages and disadvantages of various other backups methods.

This can also be useful to write more generic backup instructions to do a more complete backup.

Doing the backup of partitions or other block devices

adb shell cat pipe

Old versions of the EFS backup instructions (up to revision 17) used the following command:

adb shell "cat /dev/block/platform/*/by-name/EFS" > EFS.img

At some point or under some condition, this stopped working and the backup were corrupted.

adb shell cat adb pull

With something like that:

adb shell "cat /dev/block/platform/*/by-name/EFS > /EFS.img" 
adb pull /EFS.img ./

doing it in two stages like that seem to be widely used in other instructions (like the ones found in XDA forums).

Normally cat should produce a valid backup, however it might be better to use dd for extra safety.

On Replicant 6.0 0004, at least the recoveries for the following devices have 'dd':
  • Galaxy Nexus
  • Galaxy SIII

adb pull the block device

The following should also work:

adb pull /dev/block/mmcblk0p3 ./EFS.img

The advantage is that it can also backup huge partitions like the user data partition or Replicant system partition.

TODO:
  • Validate if doing "adb pull /dev/block/platform/*/by-name/EFS ./EFS.img" work, and if so, validate it for all the devices.
  • [by doak] No, it does not (expansion of * fails), but this would do:
    part="`adb shell "ls /dev/block/platform/*/by-name/EFS" | head --bytes=-2`" 
    adb pull "$part" ./EFS.img
    

    Be aware of the head --bytes=-2 which is needed to get rid of the nasty 0x0d 0x0a line ending returned by adb.
    (Tested on Recovery of Replicant 6.0 0003.)

Backup applications.

It might be a good idea to have a list of backup applications and/or to ship one with Replicant.

  • This backup app might be a good option for Replicant 9 or 10: https://github.com/stevesoltys/backup
  • F-droid might also has applications. As F-droid packages are not all FSDG compliant, we would need to make sure that the backup application we recommend or ship are FSDG compliant.

It might also be a good idea to understand if the backup solution chosen is sustainable in the long term: If the development stop or upstream decide to make the new version proprietary some users might have a hard time adapting to new backup applications or systems.

Updated by Denis 'GNUtoo' Carikli over 4 years ago · 17 revisions

Also available in: PDF HTML TXT