DeprecatedHeimdallRecoveryInstallation » History » Version 4
Paul Kocialkowski, 02/10/2013 07:12 PM
1 | 1 | Paul Kocialkowski | h1. Heimdall/Recovery Installation |
---|---|---|---|
2 | |||
3 | *Warning: flashing another operating system like Replicant may void your warranty and will erase the data stored on the device.* |
||
4 | |||
5 | This guide assumes your phone is supported by Heimdall and installation is to be done using recovery. |
||
6 | |||
7 | h2. Download the files |
||
8 | |||
9 | 3 | Paul Kocialkowski | * Refer to your device page to find a link to the latest images (*Last images* part of the table). |
10 | 1 | Paul Kocialkowski | * Download the images *and the md5 checksum* |
11 | * Download and install heimdall: http://www.glassechidna.com.au/products/heimdall/ |
||
12 | |||
13 | h2. Copy the files to the device |
||
14 | |||
15 | h3. Using the internal memory |
||
16 | |||
17 | # Mount usb storage from the current system of your phone |
||
18 | # Create a directory *at the root* of the usb storage |
||
19 | # Copy the downloaded images *and md5 checksum* to this directory |
||
20 | |||
21 | h3. Using a µSD card |
||
22 | |||
23 | # Mount the µSD card, make sure it's fat32 |
||
24 | # Create a directory *at the root* of the µSD card |
||
25 | # Copy the downloaded images *and md5 checksum* to this directory |
||
26 | |||
27 | 2 | Paul Kocialkowski | h2. Key combinations for Download mode |
28 | |||
29 | | *Device* | *Keys (held together)* | |
||
30 | | *Galaxy S* | VOL-, SELECT, POWER | |
||
31 | | *Galaxy S2* | VOL-, SELECT, POWER | |
||
32 | |||
33 | 1 | Paul Kocialkowski | h2. Prepare the phone |
34 | |||
35 | 4 | Paul Kocialkowski | # Turn the phone off, disconnect any USB cable |
36 | # Hold the key combination for Download mode (release only when in Download mode) |
||
37 | 1 | Paul Kocialkowski | # You should be in Download mode. If not, remove the battery and retry the steps above |
38 | # You might need to confirm that you want to _download a custom OS_ |
||
39 | 4 | Paul Kocialkowski | # Once the Download screen is waiting, plug the USB cable |
40 | |||
41 | h2. Flash the images |
||
42 | |||
43 | # Flash the recovery image using heimdall: |
||
44 | 1 | Paul Kocialkowski | <pre> |
45 | 4 | Paul Kocialkowski | ./heimdall flash --kernel path/to/recovery.img |
46 | 1 | Paul Kocialkowski | </pre> |
47 | # The phone should reboot and heimdall indicate that the operation was successful |
||
48 | # Wait until recovery boots |
||
49 | # You should be in recovery mode. If not, remove the battery and retry the steps above |
||
50 | # Select *flash images* |
||
51 | 4 | Paul Kocialkowski | # Choose the location of the images (internal sdcard is the phone's internal memory, sdcard is the µSD card) |
52 | 1 | Paul Kocialkowski | # Confirm flash |
53 | # Get back to the general menu |
||
54 | # Select *wipe data/factory reset* |
||
55 | # Confirm wipe |
||
56 | # Get back to the general menu |
||
57 | # Reboot |
||
58 | |||
59 | *Your device should now be running Replicant!* |