Project

General

Profile

DeprecatedPortingToAndroid10 » History » Version 172

Joonas Kylmälä, 07/19/2019 06:56 PM
Instructions to using SwiftShader

1 1 Denis 'GNUtoo' Carikli
h1. Porting Replicant to Android 9
2
3 101 Denis 'GNUtoo' Carikli
{{>toc}}
4 1 Denis 'GNUtoo' Carikli
5 101 Denis 'GNUtoo' Carikli
h2. AOSP 9
6
7
h3. Status with AOSP 9
8
9 98 Denis 'GNUtoo' Carikli
* The Galaxy SIII 4G (i9305) boots (with graphics hacks) under AOSP9, without having to import nonfree libraries:
10 99 Denis 'GNUtoo' Carikli
** The device boots until the lock screen
11 98 Denis 'GNUtoo' Carikli
** The graphics work but are really slow as they have not been optimized
12 49 Denis 'GNUtoo' Carikli
** Sometime the display content is corrupted
13 1 Denis 'GNUtoo' Carikli
** The touchscreen works
14 100 Denis 'GNUtoo' Carikli
* The kernel used is based on Linux 5.0-rc6 and has ~150 Android specific patches on top and some patches for the Galaxy SIII 4G (i9305) on top
15
16
h3.  Repositories and changes
17 46 Denis 'GNUtoo' Carikli
 
18
* git://git.putti.eu/aosp/manifest_i9305.git
19
* git://git.putti.eu/aosp/kernel_i9305.git
20 1 Denis 'GNUtoo' Carikli
* git://git.putti.eu/aosp/device_i9305.git
21 109 Denis 'GNUtoo' Carikli
* git://git.putti.eu/aosp/external_mesa3d.git
22 110 Denis 'GNUtoo' Carikli
* git://git.putti.eu/aosp/build_make.git
23 111 Denis 'GNUtoo' Carikli
* git://git.putti.eu/aosp/core.git
24 1 Denis 'GNUtoo' Carikli
25 100 Denis 'GNUtoo' Carikli
h3. Building AOSP version
26 1 Denis 'GNUtoo' Carikli
27 100 Denis 'GNUtoo' Carikli
h4. Source code
28 88 Denis 'GNUtoo' Carikli
29 46 Denis 'GNUtoo' Carikli
First get the source code:
30 1 Denis 'GNUtoo' Carikli
<pre>
31 46 Denis 'GNUtoo' Carikli
$ repo init -u git://git.putti.eu/aosp/manifest_i9305.git -b android-9.0.0
32 1 Denis 'GNUtoo' Carikli
</pre>
33 88 Denis 'GNUtoo' Carikli
34 164 dl lud
h4. For Trisquel 8
35
36 45 Denis 'GNUtoo' Carikli
<pre>
37 1 Denis 'GNUtoo' Carikli
sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl zlib1g-dev gcc-multilib g++-multilib libc6-dev-i386 lib32ncurses5-dev x11proto-core-dev libx11-dev lib32z-dev libgl1-mesa-dev libxml2-utils xsltproc unzip bc python-mako
38
</pre>
39
40 100 Denis 'GNUtoo' Carikli
h4. Building it
41 88 Denis 'GNUtoo' Carikli
42
Once this is done, see the device/putti/i9305/README.md for the build instructions.
43
44 100 Denis 'GNUtoo' Carikli
h4. Trisquel 8 LXC
45 88 Denis 'GNUtoo' Carikli
46
If you use Parabola, you may be interested in running Trisquel 8 in LXC.
47
48
To do that first debootstrap a Trisquel 8 rootfs. 
49
50
Parabola's debootstrap does support Trisquel 8 and its manual has an example on how to do that:
51
<pre>
52
$ man debootstrap
53
[...]
54
# debootstrap flidas flidas-root http://archive.trisquel.info/trisquel
55
</pre>
56
57
Then you can use virt-manager to setup the LXC instance.
58
59 89 Denis 'GNUtoo' Carikli
The advantages of this solution are that:
60 88 Denis 'GNUtoo' Carikli
* The LXC guest and host shares their resources (CPU, RAM) with almost no penalty
61
* Trisquel 8 is not a rolling release distribution
62
63
The disadvantage of this solution are that:
64
* you need to configure again the Trisquel 8 LXC instance (vimrc, sshd_config, etc)
65 1 Denis 'GNUtoo' Carikli
* It's more complicated to setup
66 90 Denis 'GNUtoo' Carikli
* The Android build system output a warning message about not being able to use namespaces which may become mandatory in newer Android versions
67 48 Denis 'GNUtoo' Carikli
68 102 Denis 'GNUtoo' Carikli
h2. LineageOS 16
69
70 120 Denis 'GNUtoo' Carikli
h3. Repositories and changes for LineageOS 16
71 105 Denis 'GNUtoo' Carikli
72 152 Joonas Kylmälä
* https://git.replicant.us/GNUtoo/kernel_replicant_linux.git
73 1 Denis 'GNUtoo' Carikli
* git://git.putti.eu/aosp/external_mesa3d.git
74
* https://git.replicant.us/GNUtoo/android_build.git
75
* https://git.replicant.us/GNUtoo/device_i9305.git
76 116 Denis 'GNUtoo' Carikli
* https://git.replicant.us/GNUtoo/manifest.git
77
* https://git.replicant.us/GNUtoo/vendor_replicant.git
78 120 Denis 'GNUtoo' Carikli
79
h3. Building LineageOS 16 version
80 102 Denis 'GNUtoo' Carikli
81 1 Denis 'GNUtoo' Carikli
h4. Source code
82 102 Denis 'GNUtoo' Carikli
83 1 Denis 'GNUtoo' Carikli
<pre>
84
$ repo init -u https://git.replicant.us/GNUtoo/manifest.git -b GNUtoo/lineage-16.0-base
85 142 Denis 'GNUtoo' Carikli
$ repo sync
86 102 Denis 'GNUtoo' Carikli
</pre>
87
88 162 dl lud
h4. For Trisquel 8
89
90 1 Denis 'GNUtoo' Carikli
<pre>
91 163 dl lud
sudo apt-get install bc bison build-essential ccache curl flex g++-multilib gcc-multilib gettext git gnupg gperf imagemagick lib32ncurses5-dev lib32readline-dev lib32z1-dev liblz4-tool libncurses5-dev libsdl1.2-dev libssl-dev libwxgtk3.0-dev libxml2 libxml2-utils lzop python-mako pngcrush rsync schedtool squashfs-tools xsltproc zip zlib1g-dev
92 162 dl lud
sudo apt-get install gcc-5-arm-linux-gnueabi
93 104 Denis 'GNUtoo' Carikli
</pre>
94 1 Denis 'GNUtoo' Carikli
95 104 Denis 'GNUtoo' Carikli
h4. Launching the build
96 1 Denis 'GNUtoo' Carikli
97 118 Denis 'GNUtoo' Carikli
Follow the "i9300 manifest instructions:":https://github.com/CustomRoms/android_local_manifests_i9300
98 104 Denis 'GNUtoo' Carikli
<pre>
99 118 Denis 'GNUtoo' Carikli
$ subject='/C=US/ST=California/L=Mountain View/O=Android/OU=Android/CN=Android/emailAddress=android@android.com'
100
$ mkdir .android-certs
101
$ for x in releasekey platform shared media testkey; do \
102
  ./development/tools/make_key .android-certs/$x "$subject"; \
103
  done
104
$ parallel_tasks=$(echo "$(grep 'processor' /proc/cpuinfo | wc -l ) + 1" | bc)
105 104 Denis 'GNUtoo' Carikli
$ source build/envsetup.sh
106 137 Denis 'GNUtoo' Carikli
$ lunch lineage_i9305-eng
107 118 Denis 'GNUtoo' Carikli
$ make -j${parallel_tasks} bacon
108 87 Denis 'GNUtoo' Carikli
</pre>
109 136 Denis 'GNUtoo' Carikli
110
The images can then be flashed with heimdall. They are then in:
111 1 Denis 'GNUtoo' Carikli
<pre>
112
  out/target/product/i9305/obj/PACKAGING/target_files_intermediates/lineage_i9305-target_files-eng.replicant/IMAGES/
113 142 Denis 'GNUtoo' Carikli
</pre>
114
115
h4. Getting lastest changes
116
117
* The repositories are being constantly modified with git push --force as we are trying things out, and don't want to make the commits history look too much dirty, so be sure to backup your local changes.
118
* Sometimes the manifest repository is also modified with git push --force. In that case the following commands will loose all the work you did locally but will make the repository consistent with upstream repositories again:
119
<pre>
120
$ rm -rf .repo/manifests/ # This enables me to force push and rebase the manifest repository as well
121
$ repo init -u https://git.replicant.us/GNUtoo/manifest.git -b GNUtoo/lineage-16.0-base
122
$ repo sync --force-sync
123
</pre>
124
* The following command might also be necessary to make the state consistent with upstream repositories again, when the manifest history wasn't rewritten, but it will also loose all the work you did locally: 
125
<pre>
126
$ repo sync --force-sync
127 136 Denis 'GNUtoo' Carikli
</pre>
128
129 138 Denis 'GNUtoo' Carikli
h4. Install the images
130
131
<pre>
132 165 dl lud
$ sudo heimdall flash --BOOT out/target/product/i9305/obj/PACKAGING/target_files_intermediates/lineage_i9305-target_files-eng.replicant/IMAGES/boot.img --USERDATA out/target/product/i9305/obj/PACKAGING/target_files_intermediates/lineage_i9305-target_files-eng.replicant/IMAGES/userdata.img --SYSTEM out/target/product/i9305/obj/PACKAGING/target_files_intermediates/lineage_i9305-target_files-eng.replicant/IMAGES/system.img 
133 138 Denis 'GNUtoo' Carikli
</pre>
134
135
h4. Get adb
136
137 147 Denis 'GNUtoo' Carikli
As the device IDs are the ones given by the Linux kernel, they are not in the adb udev rules, so for now it requires to run adb as root:
138 138 Denis 'GNUtoo' Carikli
<pre>
139
$ sudo adb shell
140
* daemon not running; starting now at tcp:5037
141
* daemon started successfully
142
i9305:/ #                                 
143
$ sudo adb kill-server
144
$ adb shell
145
* daemon not running; starting now at tcp:5037
146
* daemon started successfully
147
error: no devices/emulators found
148
</pre>
149
So make sure to kill the adb-server and run it as root:
150
<pre>
151
$ adb kill-server
152
$ sudo adb shell
153
* daemon not running; starting now at tcp:5037
154
* daemon started successfully
155
i9305:/ # 
156 1 Denis 'GNUtoo' Carikli
</pre>
157 147 Denis 'GNUtoo' Carikli
158
h4. Booting
159
160
At some point during boot, the device goes into suspend, so you will need to press some buttons like the power or volume button to make the boot continue until the graphical interface.
161
162
You can also follow the boot progress with adb:
163
<pre>
164
adb logcat
165
adb logcat -b main
166
</pre>
167
168 148 Denis 'GNUtoo' Carikli
Note that the device can go into suspend at any time, so adb might be interrupted. That looks like that:
169
First you get a shell
170
<pre>
171
$ sudo adb shell
172
i9305:/ #
173
</pre>
174
175
Then the connection is interrupted:
176
<pre>
177
$ adb shell
178
i9305:/ # [randomdev@fullyfreelaptop ]$                                                                                                     
179
</pre>
180
181
The effect with adb logcat is similar.
182 138 Denis 'GNUtoo' Carikli
183 150 Denis 'GNUtoo' Carikli
h3. cleanups to be done
184 140 Denis 'GNUtoo' Carikli
185
* Make adb work as user by using the right USB IDs, and make userspace do the USB setup.
186 149 Denis 'GNUtoo' Carikli
* -Make the kernel not use hardcoded CMDLINE_FORCE- Not possible unless the bootloader is changed or Linux is very heavily patched.
187 140 Denis 'GNUtoo' Carikli
* Make the kernel not use hardcoded partitions if possible (though we use system as root)
188 1 Denis 'GNUtoo' Carikli
* Make a clean Gatekeeper HAL module implementation instead of using the same hack than goldfish
189 149 Denis 'GNUtoo' Carikli
* look at "init.rc":https://android.googlesource.com/platform/system/core/+/master/init/README.md documentation to see if init.rc can be overriden clearly with the override statement to see if it's possible to keep the serial console patch for -eng
190 140 Denis 'GNUtoo' Carikli
191 172 Joonas Kylmälä
h3. Using SwiftShader instead of Mesa3D llvmpipe for software rendering
192
193
Use these commands to use SwiftShader:
194
195
<pre>
196
$ adb remount
197
$ adb shell
198
i9305:/ # rm vendor/lib/egl/libGLES_mesa.so # or move it somewhere safe meanwhile you test SwiftShader
199
i9305:/ # nano system/build.prop # set ro.hardware.hwcomposer=ranchu and ro.hardware.gralloc=default
200
$ adb reboot
201
</pre>
202
203 153 Denis 'GNUtoo' Carikli
h2. Upstreaming status
204
205
* "Unbreak 5.2 booting":https://www.openwall.com/lists/kernel-hardening/2019/06/14/4
206 156 Denis 'GNUtoo' Carikli
* -"add flash support to galaxy-s3 boards":https://lists.infradead.org/pipermail/linux-arm-kernel/2019-June/660361.html- "applied":https://lists.infradead.org/pipermail/linux-arm-kernel/2019-June/661471.html
207 153 Denis 'GNUtoo' Carikli
208 87 Denis 'GNUtoo' Carikli
h2. TODO
209 51 Denis 'GNUtoo' Carikli
210 74 Denis 'GNUtoo' Carikli
First month of full time equivalent work:
211 81 Denis 'GNUtoo' Carikli
212 127 Denis 'GNUtoo' Carikli
|_. Time estimation  |_.Task |_. Comments |
213
| DONE | -boot a device under AOSP9- | Only boots with graphics, not much more |
214
| -7h- DONE | -build it under a "FSDG compliant distribution":https://www.gnu.org/distros/free-distros.html like Trisquel8- | -WIP for AOSP, It's difficult to do precise time estimations as it could work out of the box or require one full time month of work depending on how much issues are encountered- 
215 59 Denis 'GNUtoo' Carikli
Builds under Trisquel8|
216 144 Joonas Kylmälä
| 21h | * -port the changes from AOSP9 to LineageOS 16-
217 155 Denis 'GNUtoo' Carikli
* -cleanup the code-
218 151 Joonas Kylmälä
* -build the kernel from the Android build system-
219 125 Denis 'GNUtoo' Carikli
* -make sure it builds with an FSDG compliant distribution-
220 143 Denis 'GNUtoo' Carikli
* -document the build procedure- |
221
Status:
222 155 Denis 'GNUtoo' Carikli
* Boots with adb.
223 143 Denis 'GNUtoo' Carikli
* Has ultra slow graphics |
224 127 Denis 'GNUtoo' Carikli
| 14h | find, remove and document proprietary software in LineageOS 16 | |
225
| 21h | find, remove and document privacy issues in LineageOS 16 | |
226 139 Denis 'GNUtoo' Carikli
| 7h | port the touch keys Linux -driver- dts for the  galaxy-s3 boards | Also requires a n710x for testing the patch |
227 157 Denis 'GNUtoo' Carikli
| 7h | -upstream the AAT1290 flash led Linux dts for the galaxy-s3 boards- | "applied upstream":https://lists.infradead.org/pipermail/linux-arm-kernel/2019-June/661471.html |
228 127 Denis 'GNUtoo' Carikli
| 7h | rebrand LineageOS as Replicant | |
229
| 70h | port and cleanup the the Galaxy SIII (i9300) "modem":https://github.com/fourkbomb/linux/tree/modem Linux driver from 4.16 to 5.0| |
230
|_\3. Total: 147h (~1 month) |
231 95 Denis 'GNUtoo' Carikli
232 75 Denis 'GNUtoo' Carikli
Second month of full time equivalent work:
233 1 Denis 'GNUtoo' Carikli
| * port  libsamsung-ril and libsamsung-ipc to Android 9
234
* Make the modem driver and libsamsung-ipc work together | 157h | -libsamsung-ipc should be trivial, libsamsung-ril probably needs to be heavily adapted to Trebble or the new RIL interfaces-
235 160 Denis 'GNUtoo' Carikli
-libsamsung-ipc and samsung-ril were fixed to compile on Android 9.-
236 158 Denis 'GNUtoo' Carikli
-The code was not yet tested at runtime.-
237 1 Denis 'GNUtoo' Carikli
-It also probably still need to be adapted to trebble or the new RIL interfaces to be more substainable.-
238 160 Denis 'GNUtoo' Carikli
Status:
239
* The code has been updated to work without a wrapper on Android 9, but some cleanups are needed in all the modem related components.
240
* The modem doesn't work yet on Replicant 9 but some of the initialization already works.
241 158 Denis 'GNUtoo' Carikli
On Replicant 6 we have:
242
<pre>
243
 D use-Rlog/RLOG-RIL-IPC: Starting i9300 modem boot
244
 D use-Rlog/RLOG-RIL-IPC: Opened modem image device
245
 D use-Rlog/RLOG-RIL-IPC: Mapped modem image data to memory
246
 D use-Rlog/RLOG-RIL-IPC: Opened modem boot device
247
 D use-Rlog/RLOG-RIL-IPC: Opened modem link device
248
 D use-Rlog/RLOG-RIL-IPC: Turned the modem off
249
 D use-Rlog/RLOG-RIL-IPC: Turned the modem on
250
 D use-Rlog/RLOG-RIL-IPC: Waited for link connected
251
 D use-Rlog/RLOG-RIL-IPC: Wrote ATAT in ASCII
252 167 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Reading boot ACK failed
253 166 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Sending XMM626 HSIC PSI failed
254
 E use-Rlog/RLOG-RIL-IPC: Booting IPC FMT client failed
255
 E use-Rlog/RLOG-RIL: Opening IPC FMT client failed
256 167 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL: Closed IPC FMT client
257 166 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Starting i9300 modem boot
258
 D use-Rlog/RLOG-RIL-IPC: Opened modem image device
259
 D use-Rlog/RLOG-RIL-IPC: Mapped modem image data to memory
260
 D use-Rlog/RLOG-RIL-IPC: Opened modem boot device
261
 D use-Rlog/RLOG-RIL-IPC: Opened modem link device
262 1 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Turned the modem off
263
 D use-Rlog/RLOG-RIL-IPC: Turned the modem on
264 166 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Waited for link connected
265 1 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Wrote ATAT in ASCII
266
 D use-Rlog/RLOG-RIL-IPC: Read chip id (0x16)
267
 D use-Rlog/RLOG-RIL-IPC: Wrote PSI header
268 167 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Wrote PSI, CRC is 0xc8
269
 D use-Rlog/RLOG-RIL-IPC: Wrote PSI CRC (0xc8)
270 1 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Read PSI CRC ACK
271 167 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Read PSI ACK
272
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC PSI
273
 D use-Rlog/RLOG-RIL-IPC: Wrote EBL size
274
 D use-Rlog/RLOG-RIL-IPC: Wrote EBL, CRC is 0xb5
275
 D use-Rlog/RLOG-RIL-IPC: Wrote EBL CRC (0xb5)
276
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC EBL
277
 D use-Rlog/RLOG-RIL-IPC: Read port config
278
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC port config
279
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC SEC start
280
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC firmware
281
 D use-Rlog/RLOG-RIL-IPC: Checked nv_data path
282
 D use-Rlog/RLOG-RIL-IPC: Checked nv_data md5 path
283
 D use-Rlog/RLOG-RIL-IPC: Calculated nv_data md5: 50e04bd1ae13445977f3aec356ada08d
284
 D use-Rlog/RLOG-RIL-IPC: Read nv_data md5: 50e04bd1ae13445977f3aec356ada08d
285
 D use-Rlog/RLOG-RIL-IPC: Checked nv_data backup path
286
 D use-Rlog/RLOG-RIL-IPC: Loaded nv_data
287
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC nv_data
288
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC HW reset
289
 D use-Rlog/RLOG-RIL-IPC: Waiting for host wake failed
290
 D use-Rlog/RLOG-RIL-IPC: Waited for host wake
291
 D use-Rlog/RLOG-RIL-IPC: Waited for link connected
292
 D use-Rlog/RLOG-RIL: Opened IPC FMT client
293
 D use-Rlog/RLOG-RIL-IPC: 
294
 D use-Rlog/RLOG-RIL-IPC: xmm626_sec_modem_fmt_recv: Received FMT message
295
 D use-Rlog/RLOG-RIL-IPC: xmm626_sec_modem_fmt_recv: Message: aseq=0xff, command=IPC_PWR_PHONE_PWR_UP, type=IPC_TYPE_NOTI, size=0
296
 D use-Rlog/RLOG-RIL: Updating RIL radio state to 0
297 158 Denis 'GNUtoo' Carikli
 [...]
298
</pre>
299
On Replicant 9 we have:
300 170 Denis 'GNUtoo' Carikli
<pre> 
301
 # adb shell
302
 # /system/bin/xmm6262_boot0.sh 
303
 # exit
304
 # adb logcat -b radio
305 171 Denis 'GNUtoo' Carikli
 [...] D use-Rlog/RLOG-RIL-IPC: Starting generic modem boot
306 158 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Opened modem image device
307
 D use-Rlog/RLOG-RIL-IPC: Mapped modem image data to memory
308
 D use-Rlog/RLOG-RIL-IPC: Turned the modem off
309
 D use-Rlog/RLOG-RIL-IPC: Turned the modem on
310 168 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Opened modem boot device
311 158 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Wrote ATAT in ASCII
312
 D use-Rlog/RLOG-RIL-IPC: Read chip id (0x16)
313 1 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Wrote PSI header
314 168 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Wrote PSI, CRC is 0xc8
315
 D use-Rlog/RLOG-RIL-IPC: Wrote PSI CRC (0xc8)
316 1 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Read PSI CRC ACK
317 168 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Read PSI ACK
318
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC PSI
319
 D use-Rlog/RLOG-RIL-IPC: Wrote EBL size
320
 D use-Rlog/RLOG-RIL-IPC: Wrote EBL, CRC is 0xb5
321 1 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Wrote EBL CRC (0xb5)
322
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC EBL
323
 D use-Rlog/RLOG-RIL-IPC: Read port config
324 169 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC port config
325 1 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC SEC start
326
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC firmware
327 171 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: ipc_nv_data_path_check: nv_data path: /efs/nv_data.bin
328
 D use-Rlog/RLOG-RIL-IPC: ipc_nv_data_path_check: nv_data size: 2097152
329 1 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Checked nv_data path
330 169 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Checked nv_data md5 path
331 171 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Calculated nv_data md5: 50e04bd1ae13445977f3aec356ada08d
332
 D use-Rlog/RLOG-RIL-IPC: Read nv_data md5: 50e04bd1ae13445977f3aec356ada08d
333 169 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Checked nv_data backup path
334 171 Denis 'GNUtoo' Carikli
 D use-Rlog/RLOG-RIL-IPC: Loaded nv_data
335
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC nv_data
336
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC SEC end
337
 D use-Rlog/RLOG-RIL-IPC: Sent XMM626 HSIC HW reset
338
 D use-Rlog/RLOG-RIL-IPC: Waited for host wake
339
 D use-Rlog/RLOG-RIL-IPC: Waited for link connected
340
 E use-Rlog/RLOG-RIL-IPC: Opening IPC FMT client failed
341 1 Denis 'GNUtoo' Carikli
 E use-Rlog/RLOG-RIL: Opening IPC FMT client failed
342 170 Denis 'GNUtoo' Carikli
 [...]
343 158 Denis 'GNUtoo' Carikli
</pre>  |
344 1 Denis 'GNUtoo' Carikli
|_. Total |_. 157h | ~1 month |
345
346
Third month of full time equivalent work:
347 75 Denis 'GNUtoo' Carikli
|_. Task |_. Time estimation |_. Comments |
348 125 Denis 'GNUtoo' Carikli
| -port the sensors libraries and other device specific libraries- | -70h- | Already done by the unofficial LineageOS port of the Galaxy SIII (i9300), needs testing |
349
| add support for Audio with the upstream kernel driver | 70h | Might be way faster, depending on what Android 9 uses |
350
| add partial (no modem) support for the -Galaxy SIII (i9300)- Galaxy SIII 4G (i9305) and factorize the code with i9305 | 14h | The work for the Galaxy SIII (i9300) has already been done by the unofficial LineageOS port.
351
It needs to be adapted to the upstream kernel and not to use proprietary libraries.
352
It also needs to be adapted to the Galaxy SIII 4G (i9305) |
353 1 Denis 'GNUtoo' Carikli
|_. Total |_. 154h | ~1 month |
354 67 Denis 'GNUtoo' Carikli
355 71 Denis 'GNUtoo' Carikli
|_. Task |_. Time estimation |_. Comments |
356 96 Denis 'GNUtoo' Carikli
| create a recovery | 21h | |
357 74 Denis 'GNUtoo' Carikli
| add internal WiFi support and validate the functionality | 6h | |
358 71 Denis 'GNUtoo' Carikli
| add external WiFi dongles support | 20h | External dongles support might be tricky |
359 125 Denis 'GNUtoo' Carikli
| -create new- update the install and upgrade instructions | -35h- | -Our current install instructions don't scale as we have one copy for each device.-
360
-We also created generic instructions but they tend to be harder to follow[1] than the device specific ones.-
361
-This will be made in a modular format (for instance in LaTeX) that enables to generate per device install instructions without requiring to have multiples copy of the same text.-
362
-The instructions will need to be able to be modified and compiled on an FSDG compliant distribution.- |
363 92 Denis 'GNUtoo' Carikli
364 71 Denis 'GNUtoo' Carikli
|_. Task |_. Time estimation |_. Comments |
365
| Estimate the amount of work to Reduce the attack surface | ? | |
366 1 Denis 'GNUtoo' Carikli
| Estimate the amount of work to add in-system upgrades | ? | |
367
368 82 Denis 'GNUtoo' Carikli
fn1. The generic instructions were tested at Install parties in Paris 
369 1 Denis 'GNUtoo' Carikli
370 85 Denis 'GNUtoo' Carikli
h3. Devices support:
371 1 Denis 'GNUtoo' Carikli
372 77 Denis 'GNUtoo' Carikli
h4. Easy, because it's similar enough to the Galaxy SIII (I9300)
373 97 Denis 'GNUtoo' Carikli
374
|_\3. Galaxy Note II (N7100) |
375 94 Denis 'GNUtoo' Carikli
|_. Task |_. Time estimation |_. Comments |
376 86 Denis 'GNUtoo' Carikli
| port the EA8061 LCD Linux driver | 35h | |
377
| port the S6EVR02 LCD Linux driver | 35h | |
378
| port the MAX77693 flash led Linux driver | 7h | |
379
| android: add support for the Note II (N7100) and factorize the code with Galaxy SIII (i9300) and Galaxy SIII 4G (i9305) | 14h | Should be similar to the Galaxy SIII |
380
| port the sensors libraries and other device specific libraries | 70h | It's difficult to evaluate how much time it could take |
381 125 Denis 'GNUtoo' Carikli
| add support for Audio with the upstream kernel driver | 14h | Should be similar to the Galaxy SIII |
382 86 Denis 'GNUtoo' Carikli
383 1 Denis 'GNUtoo' Carikli
|_\3. Galaxy Note 8.0 (N5100) and 8.0 WiFi (N5110) |
384 70 Denis 'GNUtoo' Carikli
|_. Task |_. Time estimation |_. Comments |
385
| Evaluate the time required to do the port | 14h | TODO |
386 69 Denis 'GNUtoo' Carikli
387 94 Denis 'GNUtoo' Carikli
h4. Needs more work and unknown upstream Linux status
388
389 54 Denis 'GNUtoo' Carikli
|_. Device |_. Time estimation |_. Comments |
390
| Galaxy S II (i9100) | | Linux: devboard dts upstream? unknown status |
391
| Galaxy Note (N7000) | | unknown Linux upstream status |
392 34 Denis 'GNUtoo' Carikli
| Galaxy Nexus (I9250) | |/2. OMAP4, no dts upsrteam |
393
| Galaxy Tab 2 7.0 (P3100), 7.0 WiFi (P3110), 10.1 (P5100), 10.1 WiFi (P5110) | |
394 2 Denis 'GNUtoo' Carikli
| GTA04 >= A4 | | TODO: a RIL needs to be written, userspace GPS support is missing, audio scenarios, etc |
395 4 Denis 'GNUtoo' Carikli
396 128 Denis 'GNUtoo' Carikli
h2. Documentation
397 1 Denis 'GNUtoo' Carikli
398 128 Denis 'GNUtoo' Carikli
h3. Replicant 6.0 changes
399
400 32 Denis 'GNUtoo' Carikli
|_. Repository path |_. rebase worked |_. Changes |
401 5 Denis 'GNUtoo' Carikli
| build | No | |
402 31 Denis 'GNUtoo' Carikli
| manifest | No | N/A |
403 4 Denis 'GNUtoo' Carikli
| bootable/recovery | Yes | * UI changes to improve usability 
404
* Branding
405
* Small fix(es) | 
406
| external/boringssl | Yes | * Small fix(es) |
407
| external/heimdall | No | |
408
| frameworks/av | Yes | * Software rendering fix(es) |
409 1 Denis 'GNUtoo' Carikli
| frameworks/base | Yes | * WiFi fixe(s) for external dongles
410 5 Denis 'GNUtoo' Carikli
* Software rendering fix(es) 
411
* Privacy fix(es) 
412
* Security improvements 
413 10 Denis 'GNUtoo' Carikli
* Usability improvements |
414 5 Denis 'GNUtoo' Carikli
| frameworks/native | No |
415
| hardware/broadcom/wlan | Yes | * Remove nonfree software |
416 33 Denis 'GNUtoo' Carikli
| hardware/libhardware | Yes | * Software rendering fix(es) |
417
| hardware/libhardware_legacy | Yes | * Don't depend on nonfree software |
418 6 Denis 'GNUtoo' Carikli
| hardware/ti/omap4 | Yes | * Remove nonfree software 
419 8 Denis 'GNUtoo' Carikli
* Don't depend on nonfree software 
420 33 Denis 'GNUtoo' Carikli
* Small fix(es) |
421 7 Denis 'GNUtoo' Carikli
| libcore | Yes | * Small fix(es) | 
422 33 Denis 'GNUtoo' Carikli
| packages/apps/Browser | Yes | * Privacy fix(es) 
423 22 Denis 'GNUtoo' Carikli
* Branding
424
* Small fix(es) |
425 11 Denis 'GNUtoo' Carikli
| packages/apps/LegacyCamera | Yes | * Software rendering fix(es)
426
* Small fix(es) |
427
| packages/apps/RepWifi | Not upstreamed, obsolete | N/A |
428
| packages/apps/ReplicantWallpapers | Not upstreamed | * Branding |
429 12 Denis 'GNUtoo' Carikli
| packages/apps/Settings | No | |
430
| packages/apps/SetupWizard | Yes | * Privacy fix(es) 
431 33 Denis 'GNUtoo' Carikli
* Don't depend on nonfree software
432 13 Denis 'GNUtoo' Carikli
* Branding |
433
| packages/apps/ThemeChooser | Yes | * Privacy fix(es) ?
434
* Don't depend on nonfree software ? |
435
| packages/providers/ContactsProvider | Yes | * Small fix(es) |
436 14 Denis 'GNUtoo' Carikli
| system/core | Yes | * Branding
437
* various fixes |
438
| vendor/replicant | No | |
439
| vendor/cmsdk | Yes | * Branding |
440
| external/chromium-webview | ? | ? |
441 33 Denis 'GNUtoo' Carikli
| external/drm_gralloc | Yes | * Software rendering fix(es) |
442 14 Denis 'GNUtoo' Carikli
| external/llvm | Yes | * Software rendering fix(es) |
443
| external/mesa3d |  Yes | * Software rendering fix(es)
444
* Performance debugging for software rendering |
445 33 Denis 'GNUtoo' Carikli
| external/parameter-framework | Yes | * Small fix(es) |
446
| external/protobuf | N/A | No changes |
447 14 Denis 'GNUtoo' Carikli
| prebuilts/ndk | ? | ? |
448 33 Denis 'GNUtoo' Carikli
| prebuilts/sdk | ? | ? |
449
| sdk | Yes | * Small fix(es) |
450 22 Denis 'GNUtoo' Carikli
| toolchain/src/binutils | Yes | * Small fix(es) |
451 1 Denis 'GNUtoo' Carikli
| toolchain/src/gcc | No | |
452
| toolchain/src/jack | Yes | * Small fix(es) |
453 20 Denis 'GNUtoo' Carikli
| toolchain/src/jill | Yes | * Small fix(es) |
454 33 Denis 'GNUtoo' Carikli
| kernel/samsung/smdk4412 |/3. Yes |/3. * Security fixes
455 22 Denis 'GNUtoo' Carikli
* Privacy Fixes (TrustZone)
456
* Don't depend on nonfree software
457 28 Denis 'GNUtoo' Carikli
* Remove nonfree software
458
* Small fix(es) |
459
| kernel/samsung/tuna |
460 25 Denis 'GNUtoo' Carikli
| kernel/samsung/espresso10 |
461 29 Denis 'GNUtoo' Carikli
| device/samsung/i9100 | No |/14. * Replace nonfree software by free software
462
* free software sensors implementation(s)
463
* free software modem audio implementation(s)
464 1 Denis 'GNUtoo' Carikli
* Software rendering fix(es)
465 33 Denis 'GNUtoo' Carikli
* Privacy Fixes (TrustZone)
466 1 Denis 'GNUtoo' Carikli
* Don't depend on nonfree software
467
* Remove nonfree software
468
* Branding
469
* Small fix(es) |
470 29 Denis 'GNUtoo' Carikli
| device/samsung/n7000 | Yes |
471
| device/samsung/i9300 | No |
472
| device/samsung/i9305 | No |
473
| device/samsung/n7100 | Yes |
474 30 Denis 'GNUtoo' Carikli
| device/samsung/n5100 | Yes |
475
| device/samsung/n5110 | Yes |
476
| device/samsung/maguro | Yes |
477
| device/samsung/tuna | Yes |
478
| device/samsung/espressowifi | Yes |
479 22 Denis 'GNUtoo' Carikli
| device/samsung/espresso3g | Yes |
480
| device/samsung/galaxys2-common | Yes |
481 23 Denis 'GNUtoo' Carikli
| device/samsung/smdk4412-common | No |
482 40 Denis 'GNUtoo' Carikli
| device/samsung/kona-common | Yes |
483
| hardware/ril/samsung-ril | Not upstreamed | N/A |
484
| external/libsamsung-ipc | Not upstreamed | N/A |
485 1 Denis 'GNUtoo' Carikli
| hardware/tinyalsa-audio | Not upstreamed? | N/A |
486 128 Denis 'GNUtoo' Carikli
487
h3. CustomROMs i9300 components
488
489 131 Denis 'GNUtoo' Carikli
|_. Repository |_. Tree path |_. Dependencies |_. Function |_. Comments |
490
|/8. https://github.com/CustomROMs/android_hardware_samsung
491
lineage-16.0 branch | hardware/samsung/macloader | | Loads the MAC Address of the WiFi network interface | Might be useful |
492
| hardware/samsung/wifiloader | | Loads the wifi kernel module (like modprobe) and setup firmware filesystems permissions | May be useful |
493
| hardware/samsung/audio | | seems to contains ril related stuff as well | Look if the ril stuff is required, go for standard audio |
494
| hardware/samsung/lineagehw/hidl/livedisplay | | livedisplay is a feature similar to what redshift does on GNU/Linux | Not sure if it works with mainline |
495
| hardware/samsung/exynos/multimedia/utils/ | seem meant for audio/video decoding offload | assembly obtimized color conversion and resize code | check assembly code license, not sure if useful |
496
| all other directories in hardware/samsung/exynos/ | nonfree firmwares, nonfree software?, smdk kernel? | audio/video decoding offload | Avoid using that |
497
| hardware/samsung/exynos3 |/2. nonfree firmwares?, nonfree software?, smdk kernel? |/2. some light libraries, display stuff (gralloc, etc), 2D acceleration (FIMG), camera (FIMC), 3D acceleration, etc |/2. Avoid using that for now |
498
| hardware/samsung/exynos4 | 
499 1 Denis 'GNUtoo' Carikli
500
h2. Links 
501
502
* https://source.android.com/setup/build/requirements
503 132 Denis 'GNUtoo' Carikli
* https://forum.xda-developers.com/galaxy-s3/development/rom-lineageos-16-0-t3875899 : status of the unofficial LineageOS port