Status for Replicant 6.0¶
This was tested with an USB Ethernet adapter compatible with the
asix Linux driver.
It probably works with more adapters as more drivers were enabled .
It probably also work with cdc_ethernet, as the drivers for that are also enabled. If it works, it should also be compatible with other Replicant smartphones (with the USB tethering), Single board computers having USB OTG ports, etc.
When everything works fine, and that an Ethernet cable is connected, the GUI will show a new icon and the Android system will automatically do a DHCP on the ethernet interface. The icon is like "<--->" but with small dots instead of dashes.
|Galaxy S 2 (GT-I9100)||Standard micro-USB host cable|
|Galaxy S 3 (GT-I9300)|
|Galaxy S 3 4G (GT-I9305)|
|Galaxy Note (GT-N7000)|
|Galaxy Note 2 (GT-N7100)|
|Galaxy Nexus (GT-I9250)|| * Ethernet works with the GUI, but seem to require to be plugged at boot
* It also probably works through the command line
|Galaxy Tab 2 7.0 (GT-P3100)||Device specific adapter|
|Galaxy Tab 2 10.1 (GT-P5100)|
|Galaxy Tab 2 7.0 Wi-Fi (GT-P3110)|
|Galaxy Tab 2 10.1 Wi-Fi (GT-P5110)|
|Galaxy Note 8.0 (GT-N5100)||?|
|Galaxy Note 8.0 Wi-Fi (GT-N5110)|
Updated by Denis 'GNUtoo' Carikli about 3 years ago · 5 revisions