Project

General

Profile

Actions

EthernetAdapter » History » Revision 3

« Previous | Revision 3/5 (diff) | Next »
Denis 'GNUtoo' Carikli, 02/14/2020 03:41 PM


EthernetAdapter

Status for Replicant 6.0

This was tested with an USB Ethernet adapter compatible with the asix Linux driver.

It probably works with more adapters as more drivers were enabled .
It probably also work with cdc_ethernet, as the drivers for that are also enabled. If it works, it should also be compatible with other Replicant smartphones (with the USB tethering), Single board computers having USB OTG ports, etc.

When everything works fine, and that an Ethernet cable is connected, the GUI will show a new icon and the Android system will automatically do a DHCP on the ethernet interface.

Device Cable Comments
Galaxy S 2 (GT-I9100) Standard micro-USB host cable
Galaxy S 3 (GT-I9300)
Galaxy S 3 4G (GT-I9305)
Galaxy Note (GT-N7000)
Galaxy Note 2 (GT-N7100)
Galaxy Nexus (GT-I9250) * Ethernet works with the GUI, but it may require to retry several times with reboots
* It also probably works through the command line
Galaxy Tab 2 7.0 (GT-P3100) Device specific adapter
Galaxy Tab 2 10.1 (GT-P5100)
Galaxy Tab 2 7.0 Wi-Fi (GT-P3110)
Galaxy Tab 2 10.1 Wi-Fi (GT-P5110)
Galaxy Note 8.0 (GT-N5100) ?
Galaxy Note 8.0 Wi-Fi (GT-N5110)

Updated by Denis 'GNUtoo' Carikli over 2 years ago · 3 revisions

Also available in: PDF HTML TXT