GTA04 Installation¶

Creating a system tarball¶

Once your Replicant build is ready (bootimage and systemimage), you need to create a system tarball:

cd out/target/product/gta04/system
tar -cf ../system.tar .
cd ..

Flashing the kernel¶

You need to flash the kernel to the place your boot.scr will try to load it (usually from NAND).

Setting up the sdcard¶

Connect the sdcard to your pc (running GNU/Linux) and run the following script (with nor arguments to see usage):

#!/bin/sh

# Replicant GTA04 Install script
#
# Copyright (C) 2012 Paul Kocialkowski, GPLv2
#
# Based on mkcard.sh v0.5
# Copyright (C) 2009 Graeme Gregory <dp@xora.org.uk>, GPLv2
# Parts of the procudure base on the work of Denys Dmytriyenko
# http://wiki.omap.com/index.php/MMC_Boot_Format
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
# 
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.

# Env vars

export LC_ALL=C

# Global vars

DRIVE="" 
DRIVE_NAME="" 
DRIVE_SIZE="" 
DRIVE_CYLINDERS="" 
DRIVE_PART="" 

SYSTEM_AR="" 
MOUNT_BASE="/media" 

# Functions

display_banner() {
    echo "Replicant GTA04 installer" 
    echo "" 
}

display_help() {
    echo "Usage: $0 [DRIVE] [SYSTEM]" 
    echo "" 
    echo "Notes: " 
    echo "- The [DRIVE] argument can be omitted" 
    echo "- The [SYSTEM] argument must be a tar archive" 
}

drive_select_list()
{
    drives_dir="/dev/disk/by-id/" 
    count=0

    list=$( ls "$drives_dir" )

    for drive in $list
    do
        drive_nopart=$( echo "$drive" | sed "s/-part[0-9]*$//g" )
        if [ "$drive" = "$drive_nopart" ]
        then
            ls $drives_dir/$drive-part* 2> /dev/null > /dev/null

            if [ $? -eq 0 ]
            then
                count=$(( $count + 1 ))
                name=$( echo "$drive" | sed "s/^[^-]*-\(.*\)$/\1/g" )

                case "$1" in
                    "show")
                        echo "$count - $name" 
                    ;;
                    "store")
                        if [ $count -eq $2 ]
                        then
                            DRIVE=$( readlink -f "$drives_dir/$drive" )
                            DRIVE_NAME="$name" 
                        fi
                    ;;
                esac
            fi
        fi
    done 
}

drive_select()
{
    echo "Available devices:" 
    drive_select_list "show" 

    echo -n "Choice: " 
    read choice

    drive_select_list "store" $choice
    echo "" 
}

drive_write_confirm() {
    if [ "$DRIVE" = "" ]
    then
        echo "Wrong drive block" 
        exit 1
    fi

    echo "This is going to erase the following drive:" 

    if [ "$DRIVE_NAME" != "" ]
    then
        echo "- $DRIVE_NAME ($DRIVE)" 
    else
        echo "- $DRIVE" 
    fi

    echo "" 
    echo -n "Are you sure? " 
    read confirm

    if [ "$confirm" = "y" ] || [ "$confirm" = "Y" ]
    then
        echo "" 
        return
    else
        exit 0
    fi
}

drive_umount() {
    umount $DRIVE* 2> /dev/null
}

drive_empty() {
    dd if=/dev/zero of="$DRIVE" bs=1024 count=1024
}

drive_infos_get() {
    DRIVE_SIZE=$( fdisk -l "$DRIVE" | grep Disk | grep bytes | awk '{print $5}' )
    DRIVE_CYLINDERS=$( echo "$DRIVE_SIZE/255/63/512" | bc )
}

drive_partitions_set() {
    system_size=$( echo "(250 * 1024 * 1024) / ($DRIVE_SIZE/$DRIVE_CYLINDERS)" | bc )
    data_size=$( echo "(250 * 1024 * 1024) / ($DRIVE_SIZE/$DRIVE_CYLINDERS)" | bc )
    cache_size=$( echo "(100 * 1024 * 1024) / ($DRIVE_SIZE/$DRIVE_CYLINDERS)" | bc )

    {
        echo ",$system_size,83" 
        echo ",$data_size,83" 
        echo ",$cache_size,83" 
        echo ",,0c" 
    } | sfdisk -D -H 255 -S 63 -C "$DRIVE_CYLINDERS" "$DRIVE" 

    mkfs.ext2 -L "system" "${DRIVE}1" 
    mkfs.ext2 -L "data" "${DRIVE}2" 
    mkfs.ext2 -L "cache" "${DRIVE}3" 
    mkfs.vfat -F 32 -n "storage" "${DRIVE}4" 
}

system_write() {
    echo "Writing system files" 

    mkdir -p "$MOUNT_BASE/system" 
    mount "${DRIVE}1" "$MOUNT_BASE/system" 
    tar -p -xf $SYSTEM_AR -C "$MOUNT_BASE/system" 
    dir=$( pwd )

    echo "Syncing files" 
    cd "$MOUNT_BASE/system" 
    sync
    cd "$dir" 

    rmdir "$MOUNT_BASE/system" 
}

display_end() {
    echo "" 
    echo "Your drive is now ready to be used!" 
}

drive_eject() {
    eject "$DRIVE" 
}

# Script start

if [ $# -eq 0 ]
then
    display_help
    exit 1
fi

if [ $# -eq 1 ]
then
    SYSTEM_AR=$1
fi

if [ $# -eq 2 ]
then
    DRIVE=$1
    SYSTEM_AR=$2
fi

display_banner

if [ "$DRIVE" = "" ]
then
    drive_select
fi

drive_write_confirm
drive_umount
drive_empty
drive_infos_get
drive_partitions_set
system_write
display_end
drive_eject