Replicant

h1. I9100GBootloader

h2. Unsigned versions

We need to correlate some devices property (like the Android version it's shipped with, serial numbers, etc) to be able to easily differentiate between signed and unsigned versions, to makes it much more simple to get devices with unsigned bootloaders.

"hpagseddy/i9100g_xloader":https://github.com/hpagseddy/i9100g_xloader is based on "ths-backup/i9100g_xloader":https://github.com/ths-backup/i9100g_xloader which has an ics (Icecream Sandwitch, an Android version) branch only.

Devices with Android 4.0.4 or 4.1.2 might have the unsigned bootloader while at least one device with Android 2.3.6 have a signed bootloader.

h2. Signed versions

[[People#Denis-GNUtoo-Carikli|GNUtoo]] was given a device with the following characteristics:

*Software state*: Running the stock OS, unmodified

*Android version*: Android 2.3.6

*Baseband version*: IG9100GZCLC2

*Build number*: GINGERBREAD.ZCLC2

*Kernel version*: 2.6.35.7 se.infra@SEI-30#2

For the IMSI, Serial numbers, etc you'd have to ask him.

h2. How to check for signed bootloader

To get the bootrom to try to boot on USB, you need to do the following:

* Connect the USB cable to the device but make sure it's not connected on the computer.

* Power off the device

* Connect the USB cable

If we do that, we get the following in the kernel log of your laptop:

<pre>

usb 1-1: new high-speed USB device number 24 using ehci-pci

usb 1-1: unable to get BOS descriptor or descriptor too short

usb 1-1: New USB device found, idVendor=0451, idProduct=d00f, bcdDevice= 0.00

usb 1-1: New USB device strings: Mfr=33, Product=37, SerialNumber=0

usb 1-1: Product: OMAP4430

usb 1-1: Manufacturer: Texas Instruments

</pre>

We can also try to get a bit more infos with omap-usb-boot:

<pre>

$ sudo omap-usb-boot -v -w boot invalidbootmedia

Finding and opening USB device

Found and opened omap4 USB device: OMAP4430

ASIC device id: 4430, HS device

Booting from device invalidbootmedia...

Booting device invalidbootmedia not found

Booting from device failed

</pre>

Here we know the device is signed because it's a "HS device".

If it was not signed it would print "GP device" instead.

h2. Source code

* https://github.com/hpagseddy/i9100g_xloader This got rebuilt and flashed, and it worked on the device it was tested on.

* https://blog.the-leviathan.ch/?p=408

h2. TODO

* Understand how to get unsigned versions (Android version, serial number, etc)

* Get a device with u-boot and ask samsung for source code

* Try to boot the xloader nevertheless, as the device could be in some "verify but not enforce mode" for signatures