Project

General

Profile

Actions

GalaxyNexusGTI9250 » History » Revision 37

« Previous | Revision 37/51 (diff) | Next »
Denis 'GNUtoo' Carikli, 04/01/2019 05:09 PM
The Linux names are not in caps unlike the other devices (ls -la /dev/block/platform/omap/omap*/by-name/ to obtain them)


Galaxy Nexus (I9250)

Created with Android Asset Studio, CC BY 3.0 Device Galaxy Nexus (I9250)
Manufacturer Google/Samsung
Release date November 2011
Codename maguro
Status Maintained
Maintainer(s) Paul Kocialkowski
Wolfgang Wiedmeyer
Supported models GSM: I9250
Latest images Replicant 6.0 0003

Replicant status

Replicant status for the Galaxy Nexus (I9250): ReplicantStatus Replicant 6.0

Replicant installation

Replicant installation for the Galaxy Nexus (I9250): GalaxyNexusI9250Installation

Replicant build

Replicant build for the Galaxy Nexus (I9250): GalaxyNexusI9250Build

Replicant development

Freedom and privacy/security issues

Privacy/security issues on the Galaxy Nexus (I9250): GalaxyNexusI9250PrivacySecurityIssues

Research

OMAP4 Ducati camera

Hardware table

Component Name Source Status
SoC TI OMAP 4460 Linux kernel Linux kernel support
GPU PowerVR SGX540 https://wiki.lineageos.org/devices/maguro Linux kernel support, proprietary userspace
Audio Codec TWL6040 Linux kernel Linux kernel support (ALSA)
Modem XMM6260 Linux kernel Free userspace implementation: Samsung-RIL/libsamsung-ipc
Wi-Fi BCM4330 Linux kernel Linux kernel support, proprietary loaded firmware
Bluetooth BCM4330 Linux kernel Linux kernel support, proprietary loaded firmware
NFC PN544 Android userspace Linux kernel support
GPS GSD4t Android userspace Proprietary userspace, no free implementation: GSD4t
Accelerometer BMA250 Linux kernel Linux kernel support, free userspace
Compass YAS530 Kernel sources Linux kernel support, free userspace

Software configuration

The booloader of this device have two software interface to load code:
  • Fastboot which is the primary interface to use to install Replicant which has been tested. It can be accessed by holding the volume-down, volume-up and power key combination while powering up the device.
  • Heimdall can be used after holding the volume-down and power key combination while powering up the device, however interface has not been tested beside gathering logs with print-pit, so proceed with care. See GalaxyNexusI9250Pit for PIT partition table.

Partitions

PIT Linux name mount point partition type block device Description
system /system ext4 mmcblk0p10 system partition
boot None None mmcblk0p7 boot.img partition
recovery None None mmcblk0p8 recovery partition
userdata /data ext4 mmcblk0p12 data partition
efs /factory ext4 mmcblk0p3 modem data partition

Updated by Denis 'GNUtoo' Carikli almost 5 years ago · 37 revisions

Also available in: PDF HTML TXT