Project

General

Profile

Google Summer of Code 2018 » History » Revision 24

Revision 23 (Fil Bergamo, 01/22/2018 06:19 PM) → Revision 24/82 (Fil Bergamo, 01/22/2018 06:23 PM)

h1. Google Summer of Code 2018 

 Replicant intends to apply to GSoC 2018 as part of the FSF umbrella.    This page lists suggested projects for GSoC students.    *This list is a draft!* 

 *Note: Working on most of these projects requires a sufficiently powerful computer with enough disk space to build Replicant.* 

 h2. Advance the Optimus Black U-Boot and Linux mainline ports 

 The Optimus Black is an interesting potential target for Replicant, since it has the ability to use a free bootloader.    Paul did some initial work on getting U-Boot and mainline Linux running on it, which would lay the groundwork for a future Replicant port.    You can help by picking up where Paul left off, and getting U-Boot and mainline Linux running on the Optimus Black. 

 *Difficulty*: TODO 

 *Requirements/Prerequisites*: TODO 

 *Expected Outcomes/Deliverables*: TODO 

 *Possible Mentors*: Paul (confirmed) 

 h2. Advance the Kindle Fire first generation U-Boot and Linux mainline ports 

 (Project description: TODO.) 

 *Difficulty*: TODO 

 *Requirements/Prerequisites*: TODO 

 *Expected Outcomes/Deliverables*: TODO 

 *Possible Mentors*: Paul (confirmed) 

 h2. Access Point mode for RepWifi 

 RepWifi is Replicant's app for using an external USB WiFi adapter.    RepWifi is useful for Replicant because there exist USB WiFi adapters with free firmware, while the built-in WiFi chipsets in mobile phones do not have free firmware.    Right now, RepWifi doesn't support acting as an access point (e.g. for WiFi tethering purposes); you can help by adding this functionality to RepWifi. 

 *Difficulty*: Easy to Medium 

 *Requirements/Prerequisites*: Knowledge of Java and basic shell scripting. Basic knowledge about wpa_supplicant and general network management in POSIX environments. 
 Required knowledge builds up very fast by trial and error, no need to be experts in networking, it's mostly about researching and learning. 

 *Expected Outcomes/Deliverables*: Make wpa_supplicant run in "Access Point mode", allowing another device to connect to the phone via WiFi, and use its mobile data connection to access the internet. Integrate the needed GUI functions into RepWifi. 

 *Possible Mentors*: Fil (confirmed) 

 h2. Port Replicant to a newer LineageOS version 

 Replicant is currently based on LineageOS 13.    It would be desirable to upgrade Replicant to a newer release of LineageOS. 

 *Difficulty*: Medium 

 *Requirements/Prerequisites*: Knowledge of C, C++, and Java. 

 *Expected Outcomes/Deliverables*: Remove all proprietary components of LineageOS, port all the changes needed to successfully boot without any blobs, rebrand LineageOS as Replicant. 

 *Possible Mentors*: Forkbomb (confirmed), Wolfgang? 

 h2. OS Updater 

 It would be useful for a Replicant device to be able to update itself to a new version of Replicant without requiring being connected to a PC.    You can help by implementing this functionality.    LineageOS already supports this; we suspect that it should be possible to adapt this LineageOS functionality to Replicant. 

 *Difficulty*: Medium to Hard 

 *Requirements/Prerequisites*: TODO 

 *Expected Outcomes/Deliverables*: TODO 

 *Possible Mentors*: Wolfgang? 

 h2. Implement a fully-featured QMI-RIL 

 (Project description: TODO.) 

 *Difficulty*: TODO 

 *Requirements/Prerequisites*: TODO 

 *Expected Outcomes/Deliverables*: TODO 

 *Possible Mentors*: Wolfgang? 

 h2. Implement the missing features of Samsung-RIL 

 Samsung-RIL is the RIL (Radio Interface Layer) that many Replicant devices use to communicate with the modem.    It is a free, reverse-engineered replacement for the proprietary RIL that the Samsung phones ship with by default (which has been found to have backdoors). Right now, Samsung-RIL mostly implements only the protocol features that are absolutely necessary for the phone to be operable.    As a result, many more rarely used protocol features are unimplemented, which decreases functionality compared to the proprietary RIL.    You can help by implementing the missing features of Samsung-RIL. 

 *Difficulty*: Medium to Hard 

 *Requirements/Prerequisites*: Knowledge of C. 

 *Expected Outcomes/Deliverables*: Implement the missing features listed at [[Samsung-RIL]]. 

 *Possible Mentors*: Forkbomb (confirmed), Wolfgang? 

 h2. Debug metallic sound in many 3G calls 

 Replicant has been observed to sometimes exhibit a metallic sound quality when doing voice calls over 3G (2G works fine).    This is problematic, since most users prefer to stay in 3G mode (and some carriers are dropping support for 2G).    You can help by debugging the issue. 

 *Difficulty*: TODO 

 *Requirements/Prerequisites*: TODO 

 *Expected Outcomes/Deliverables*: TODO 

 *Possible Mentors*: TODO 

 h2. Optimize power consumption in external WiFi adapter firmware 

 The USB WiFi adapters used with Replicant are originally intended for laptops, not phones.    As a result, they tend to consume a lot of power.    This poses two issues: they can adversely impact battery life, and they can randomly stop working completely (e.g. needing to unplug and replug the adapter periodically to keep it operational).    You can help by optimizing power consumption in the WiFi adapter firmware. 

 *Difficulty*: TODO 

 *Requirements/Prerequisites*: TODO 

 *Expected Outcomes/Deliverables*: TODO 

 *Possible Mentors*: TODO 

 h2. Upgrade the WebView 

 Replicant uses an old version of the Android WebView (from circa 2015).    This is a security and functionality problem.    You can help by getting a more recent WebView working on Replicant. 

 *Difficulty*: TODO 

 *Requirements/Prerequisites*: TODO 

 *Expected Outcomes/Deliverables*: TODO 

 *Possible Mentors*: TODO 

 h2. Port the Galaxy S3 and Galaxy Note 2 to Mainline Linux 

 The Galaxy S3 and Galaxy Note 2 currently use a vendor fork of Linux, which poses a maintainability and security issue.    Forkbomb has done some initial work on porting these devices to use mainline Linux.    You can help by continuing this work. 

 *Difficulty*: Medium to Hard 

 *Requirements/Prerequisites*: Knowledge of C 

 *Expected Outcomes/Deliverables*: Audio working, modem working, and Replicant or LineageOS booting with mainline Linux. 

 *Possible Mentors*: Forkbomb (confirmed) 

 h2. Projects mentored by other organizations 

 h3. llvmpipe ARM optimizations 

 (Project description: TODO; can probably be adapted from https://redmine.replicant.us/projects/replicant/wiki/GraphicsResearch#llvmpipe .) 

 *Difficulty*: TODO 

 *Requirements/Prerequisites*: TODO 

 *Expected Outcomes/Deliverables*: TODO 

 Mesa would probably be a good organization for mentoring this project.    If interested in working on this project, please propose it to Mesa.    (We're happy to help.)