Project

General

Profile

Actions

Google Summer of Code 2018 » History » Revision 43

« Previous | Revision 43/82 (diff) | Next »
Jeremy Rand, 01/23/2018 12:28 AM


Google Summer of Code 2018

Replicant intends to apply to GSoC 2018 as part of the FSF umbrella. This page lists suggested projects for GSoC students. This list is a draft!

Note: Working on most of these projects requires a sufficiently powerful computer with enough disk space to build Replicant.

Advance the Optimus Black U-Boot and Linux mainline ports

The Optimus Black from LG is an interesting device from the perspective of freedom and privacy/security. It has the ability to run a free bootloader and uses an OMAP3 SoC that is well-documented and supported in upstream U-Boot (bootloader) and Linux (kernel). Its modem is well-isolated from the rest of the device, ensuring a sane base for privacy/security. Currently, the device-specific parts of the mainline U-Boot and Linux ports are still at an early stage, where they are functional with a very limited set of supported hardware.

Advancing the Optimus Black U-Boot and Linux mainline ports would allow using the device with free, up-to-date and maintainable software and would pave the way for support in GNU/Linux systems as well as Replicant. A list of priorities in hardware support will be defined, with the objective of tackling as many as possible.

Difficulty: Medium

Requirements/Prerequisites: C programming language, driver development

Expected Outcomes/Deliverables: Improved hardware support for the Optimus Black in U-Boot and Linux

Possible Mentors: Paul (confirmed), GNUtoo (confirmed, backup)

Advance the Kindle Fire (first generation) U-Boot and Linux mainline ports

The Kindle Fire (first generation) from Amazon is an interesting device from the perspective of freedom and privacy/security. It has the ability to run a free bootloader and uses an OMAP4 SoC that is well-documented and supported in upstream U-Boot (bootloader) and Linux (kernel). It does not embed a modem, ensuring a sane base for privacy/security. Currently, the device-specific parts of the mainline U-Boot and Linux ports are still at an early stage, where they are functional with a very limited set of supported hardware.

Advancing the Kindle Fire (first generation) U-Boot and Linux mainline ports would allow using the device with free, up-to-date and maintainable software and would pave the way for support in GNU/Linux systems as well as Replicant. A list of priorities in hardware support will be defined, with the objective of tackling as many as possible.

Difficulty: Medium

Requirements/Prerequisites: C programming language, driver development

Expected Outcomes/Deliverables: Improved hardware support for the Kindle Fire (first generation) in U-Boot and Linux

Possible Mentors: Paul (confirmed), GNUtoo (confirmed, backup)

Implementing generic Hardware Abstraction Layers (HALs)

Currently, Replicant uses a dedicated Hardware Abstraction Layer per device, because device manufacturers implemented non-standard kernel interfaces. However, Android works with mainline kernels and supports plug-n-play hardware nowadays, so it makes sense to have generic Hardware Abstraction Layers for the standard interfaces of the Linux kernel (ALSA, V4L2, etc). In particular, this would allow supporting external Wi-Fi dongles such as the ones supported by the ath9k_htc driver and free firmwares without the need for a specific application or configuration.

Difficulty: Medium

Requirements/Prerequisites: C programming language, kernel interfaces knowledge

Expected Outcomes/Deliverables: A collection of generic HALs for Android and Replicant

Possible Mentors: Forkbomb (confirmed), Paul (confirmed, backup)

Access Point mode for RepWifi

RepWifi is Replicant's app for using an external USB WiFi adapter. RepWifi is useful for Replicant because there exist USB WiFi adapters with free firmware, while the built-in WiFi chipsets in mobile phones do not have free firmware. Right now, RepWifi doesn't support acting as an access point (e.g. for WiFi tethering purposes); you can help by adding this functionality to RepWifi.

Note that this task can be superseded by: Implementing generic Hardware Abstraction Layers (HALs)

Difficulty: Easy to Medium

Requirements/Prerequisites: Knowledge of Java and basic shell scripting. Basic knowledge about wpa_supplicant and general network management in POSIX environments.
Required knowledge builds up very fast by trial and error, no need to be experts in networking, it's mostly about researching and learning.

Expected Outcomes/Deliverables: Make wpa_supplicant run in "Access Point mode", allowing another device to connect to the phone via WiFi, and use its mobile data connection to access the internet. Integrate the needed GUI functions into RepWifi.

Possible Mentors: Fil (confirmed)

Port Replicant to a newer LineageOS version and support in-system updates

Replicant is currently based on LineageOS 13. It would be desirable to upgrade Replicant to a newer release of LineageOS. While at it, it would be useful for a Replicant device to be able to update itself to a new version of Replicant without requiring being connected to a PC. LineageOS already supports this; we suspect that it should be possible to adapt this LineageOS functionality to Replicant.

Difficulty: Medium

Requirements/Prerequisites: Knowledge of C, C++, and Java.

Expected Outcomes/Deliverables: Remove all proprietary components of LineageOS, port all the changes needed to successfully boot without any blobs, rebrand LineageOS as Replicant and support in-system updates

Possible Mentors: Forkbomb (confirmed), Wolfgang?

Implement the missing features of Samsung-RIL

Samsung-RIL is the RIL (Radio Interface Layer) that many Replicant devices use to communicate with the modem. It is a free, reverse-engineered replacement for the proprietary RIL that the Samsung phones ship with by default (which has been found to have backdoors). Right now, Samsung-RIL mostly implements only the protocol features that are absolutely necessary for the phone to be operable. As a result, many more rarely used protocol features are unimplemented, which decreases functionality compared to the proprietary RIL. You can help by implementing the missing features of Samsung-RIL.

Difficulty: Medium to Hard

Requirements/Prerequisites: Knowledge of C.

Expected Outcomes/Deliverables: Implement the missing features listed at Samsung-RIL.

Possible Mentors: Forkbomb (confirmed), Wolfgang?

Debug metallic sound in many 3G calls

We're folding this one into Samsung-RIL as an optional component or stretch goal.

Replicant has been observed to sometimes exhibit a metallic sound quality when doing voice calls over 3G (2G works fine). This is problematic, since most users prefer to stay in 3G mode (and some carriers are dropping support for 2G). You can help by debugging the issue.

Difficulty: TODO

Requirements/Prerequisites: TODO

Expected Outcomes/Deliverables: TODO

Possible Mentors: GNUtoo (confirmed)

Implement a fully-featured QMI-RIL

The LTE variants of the Samsung Galaxy S3 and Samsung Galaxy Note 2 use a different modem from the non-LTE variants that Replicant currently supports. You can help Replicant support those modems by implementing a QMI-RIL, which performs a similar role on the LTE variants as what Samsung-RIL performs on the currently-supported non-LTE variants. Wolfgang has done some preliminary work on this, so you'll probably be picking up where he left off.

Difficulty: Hard

Requirements/Prerequisites: Knowledge of C.

Expected Outcomes/Deliverables: TODO

Possible Mentors: Forkbomb (confirmed), Wolfgang?

Optimize power consumption in external WiFi adapter firmware

The USB WiFi adapters used with Replicant are originally intended for laptops, not phones. As a result, they tend to consume a lot of power. This poses two issues: they can adversely impact battery life, and they can randomly stop working completely (e.g. needing to unplug and replug the adapter periodically to keep it operational). You can help by optimizing power consumption in the WiFi adapter firmware.

Difficulty: TODO

Requirements/Prerequisites: TODO

Expected Outcomes/Deliverables: TODO

Possible Mentors: GNUtoo (confirmed)

Tackle security issues in Replicant

Replicant is plagued by various security issues, that are mostly due to using a downstream codebase. One of the most crucial issues is that Replicant uses an old version of the Android WebView (from circa 2015), which is also a functionality drawback.
An initial evaluation of the security issues in Replicant should be conducted, followed by the integration or update of the concerned components of the system.

Difficulty: Medium-Hard

Requirements/Prerequisites: Android build system, knowledge of system security, advanced git

Expected Outcomes/Deliverables: Integration or update of components of Replicant to tackle security issues

Possible Mentors: Wolfgang?

Port the Galaxy S3 and Galaxy Note 2 to Mainline Linux

The Galaxy S3 and Galaxy Note 2 currently use a vendor fork of Linux, which poses a maintainability and security issue. Forkbomb has done some initial work on porting these devices to use mainline Linux. You can help by continuing this work.

Difficulty: Medium to Hard

Requirements/Prerequisites: Knowledge of C

Expected Outcomes/Deliverables: Audio working, modem working, and Replicant or LineageOS booting with mainline Linux.

Possible Mentors: Forkbomb (confirmed), GNUtoo (confirmed)

Fix the Free software distribution guidelines issues.

Replicant has some issues with FSDG compliance: F-droid repository is not FSDG compliant anymore, and Replicant can't be built from an FSDG distribution. Replicant should also not depends on pre-built dependencies anymore and build without issues.

Difficulty: Easy

Requirements/Prerequisites: Knowledge of shell scripts and the ability to learn the Android build system

Expected Outcomes/Deliverables: The ability to compile Replicant from an FSDG distribution

Possible Mentors: GNUtoo (confirmed)

Projects mentored by other organizations

llvmpipe ARM optimizations

(Project description: TODO; can probably be adapted from https://redmine.replicant.us/projects/replicant/wiki/GraphicsResearch#llvmpipe .)

Difficulty: TODO

Requirements/Prerequisites: TODO

Expected Outcomes/Deliverables: TODO

Mesa would probably be a good organization for mentoring this project. If interested in working on this project, please propose it to Mesa. (We're happy to help.)

Updated by Jeremy Rand almost 7 years ago · 43 revisions

Also available in: PDF HTML TXT