ImagesIdentification » History » Revision 36
« Previous |
Revision 36/46
(diff)
| Next »
Denis 'GNUtoo' Carikli, 02/23/2020 01:38 PM
Add espressowifi (tested with the espressowifi image on espresso3g)
ImagesIdentification¶
Introduction¶
If you have installed Replicant a long time ago, you might not remember which exact Replicant version was on the phone.
Some information on the images can be found in Settings->About phone.
Some Replicant images don't clearly indicate which release they correspond to in "Settings->About phone".
However it is still possible find out by matching information like the build date and build number to the release with the data that is in the table below.
Security¶
Note that this doesn't replace strong cryptographic checks, however it can complement them:- Anybody with basic programming skills is able to build Replicant images that have arbitrary text displayed in "Settings->About phone".
- The RecoveryInstallationWithHeimdall guide which is followed during Replicant installation explains how to check the signature of recovery images. Once that signature is checked and that the recovery is installed, the recovery will check the signature of the zip images used during the installation.
- Zip images are also signed with gpg to be able to check them if needed.
- Files can easily be renamed, and once renamed the signatures will still match.
So if you check the signatures in some way, you still need to make sure that you are installing the right Replicant version. This helps checking that.
Help needed¶
The number of Replicant images released is quite big. We need help to fill the information below, either by:- Installing and booting a given image on a device where you don't have any valuable data, and filling the information found in this page.
- Finding a way to get the strings reported below from a given image without having to boot it
Feel free to add directly add the information below if you have a wiki account, or to paste it on IRC, or send it to the mailing list. You can pick whichever way suits you best.
The Replicant 6.0 0003 images are the most important ones to complete.
The last Replicant 4.2 images are also interesting, as some people are still using it because they don't exhibit the "sim not recognized bug" that is now fixed since Replicant 6.0 0004 RC1.
Beside that it could be nice to have older images as well, but it's not that important as not many people are using them. It could be a good idea to add them along the way when people test them for one reason or another.
Replicant 6.0¶
Replicant 6.0 0004 images¶
Note that at the time of writing, the images are not out yet.
Device | Image type | Identification |
---|---|---|
All devices | System | Replicant version: replicant-6.0-0004 |
Replicant 6.0 0004 RC1 images¶
Device | Image type | Identification |
---|---|---|
All devices | System | Replicant version: replicant-6.0-0004-rc1 |
Replicant 6.0 0003 images¶
Device | Image type | Identification |
---|---|---|
Galaxy S 2 (I9100) | System | * Kernel version: 3.0.101-replicant wolfi@machinist #3 Sun Dec 10 21:37:52 UTC 2017 * Build date: So 10. Dez 07:02:04 UTC 2017 * Build number: replicant_i9100-userdebug 6.0.1 MOI10E eng.wolfi.20171210.065337 |
Galaxy S 3 (I9300) | System | * Kernel version: 3.0.101-replicant wolfi@machinist #1 Sun Dec 10 15:47:55 UTC 2017 * Build date: So 10. Dez 14:44:33 UTC 2017 * Build number: replicant_i9300-userdebug 6.0.1 MOI10E eng.wolfi.20171210.143631 |
Galaxy S 3 4G (I9305) | System | * Kernel version: 3.0.101-replicant wolfi@machinist #1 Sun Dec 10 18:35:42 UTC 2017 * Build date: So 10. Dez 17:31:16 UTC 2017 * Build number: replicant_i9305-userdebug 6.0.1 MOI10E eng.wolfi.20171210.172231 |
Galaxy Note (N7000) | System | * Kernel version: 3.0.101-replicant wolfi@machinist #3 Sun Dec 10 21:44:54 UTC 2017 * Build date: So 10. Dez 09:03:56 UTC 2017 * Build number: replicant_n7000-userdebug 6.0.1 MOI10E eng.wolfi.20171210.085637 |
Galaxy Note 2 (N7100) | System | * Kernel version: 3.0.101-replicant wolfi@machinist #1 Sun Dec 10 17:11:15 UTC 2017 * Build date: So 10. Dez 16:07:40 UTC 2017 * Build number: replicant_n7100-userdebug 6.0.1 MOI10E eng.wolfi.20171210.155927 |
Galaxy Nexus (I9250) | System | * Kernel version: 3.0.101-replicant wolfi@machinist #1 Sun Dec 10 11:40:22 UTC 2017 * Build date: So 10. Dez 10:28:04 UTC 2017 * Build number: replicant_maguro-userdebug 6.0.1 MOI10E eng.wolfi.20171210.102026 |
Galaxy Tab 2 7.0 (P31xx) | System | * Kernel version: 3.0.101-replicant wolfi@machinist #1 Sun Dec 10 14:23:54 UTC 2017 * Build date: So 10. Dez 13:21:16 UTC 2017 * Build number: replicant_espresso3g-userdebug 6.0.1 MOI10E eng.wolfi.20171210.131314 |
Galaxy Tab 2 10.1 (P51xx) | ||
Galaxy Tab 2 7.0 Wi-Fi (P3110) | System | * Kernel version: 3.0.101-replicant wolfi@machinist #1 Sun Dec 10 13:01:42 UTC 2017 * Build date: So 10. Dez 11:59:09 UTC 2017 * Build number: replicant_espressowifi-userdebug 6.0.1 MOI10E eng.wolfi.20171210.115131 |
Galaxy Tab 2 10.1 Wi-Fi (P5110) | ||
Galaxy Note 8.0 (N51xx) | System | |
Galaxy Note 8.0 Wi-Fi (N5110) | System |
Replicant 6.0 0002 images¶
Replicant 6.0 0001 images¶
Replicant 4.2¶
Replicant 4.2 0004 images¶
Replicant 4.2 0003 images¶
Replicant 4.2 0002 images¶
Replicant 4.2 0001 images¶
Replicant 4.0¶
Replicant 4.0 0005 images¶
Replicant 4.0 0004 images¶
Replicant 4.0 0003 images¶
Replicant 4.0 0002 images¶
Replicant 4.0 0001 images¶
Replicant 2.3¶
Replicant 2.3 0005 images¶
Replicant 2.3 0004 images¶
Replicant 2.3 0003 images¶
Replicant 2.3 0002 images¶
Replicant 2.3 0001 images¶
Replicant 2.2¶
Replicant 2.2 0009¶
Replicant 2.2 0008¶
Replicant 2.2 0007¶
Replicant 2.2 0006¶
Replicant 2.2 0005¶
Replicant 2.2 0004¶
Replicant 2.2 0003¶
Replicant 2.2 0002¶
Replicant 2.2 0001¶
Updated by Denis 'GNUtoo' Carikli over 4 years ago · 36 revisions