Project

General

Profile

InstallOrUpgradeWithoutAComputer » History » Version 13

Denis 'GNUtoo' Carikli, 05/08/2019 02:15 PM

1 13 Denis 'GNUtoo' Carikli
h1. Install or upgrade Replicant without a computer
2 1 Denis 'GNUtoo' Carikli
3
h2. Download the update file
4
5
1. Make sure the device is connected to the Internet
6
2. Navigate to https://redmine.replicant.us/projects/replicant/wiki/ReplicantImages with a "web browser":https://en.wikipedia.org/wiki/Web_browser
7 9 Denis 'GNUtoo' Carikli
3. In that page, find the lastest update file for your device, it will look like that:
8
<pre>
9
replicant-6.0-<yourdevice>.zip
10
</pre>
11
For instance for the Samsung Galaxy S2, the update file will be named replicant-6.0-i9100.zip
12
4. Download the update file
13
5. When finished, check in the "Download" application if everything went fine. If it didn't, it will show some error message.
14 3 Denis 'GNUtoo' Carikli
15
h2. Reboot to recovery
16 6 Denis 'GNUtoo' Carikli
17 4 Denis 'GNUtoo' Carikli
1. Press the power button
18
2. Select Reboot
19
3. Select Recovery
20
4. Press OK
21 3 Denis 'GNUtoo' Carikli
22
h2. Apply the update
23
24 1 Denis 'GNUtoo' Carikli
1. Select *Apply update*
25
2. Select *Choose from emulated*
26
3. Select the update file, which looks like that: *replicant-6.0-<yourdevice>.zip*
27
   The file will usually be located in 0/Download, so select 0, then Download, then the file.
28 10 Denis 'GNUtoo' Carikli
4. It may ask you to confirm the installation. If it is the case, confirm it.
29 1 Denis 'GNUtoo' Carikli
5. Press the back key (if necessary) to get back to the general menu