Librem5Phone » History » Version 14
Denis 'GNUtoo' Carikli, 02/10/2020 10:22 PM
Add an article about the Librem5: The writer(s) did their work correctly and also gave broader context which is interesting.
1 | 1 | Denis 'GNUtoo' Carikli | h1. Librem5 |
---|---|---|---|
2 | |||
3 | 8 | Sebastian Krzyszkowiak | Two early batches (Birch and Chestnut) of Librem 5 are already in the hands of backers and developers. Another batch, Dogwood, is expected in March 2020 and then a mass produced one, Evergreen, in Q2 2020. |
4 | |||
5 | 9 | Sebastian Krzyszkowiak | |_. Component | Hardware | Comments | |
6 | 12 | Denis 'GNUtoo' Carikli | | SoC | iMX8M Quad CPU | * The non-free DDR4 controller firmware is "handled by a M4 core present in the SoC":https://puri.sm/posts/librem5-solving-the-first-fsf-ryf-hurdle/ and will be on a separate flash chip (so Replicant won't have to redistribute it). |
7 | 10 | dl lud | * The bootloader (u-boot + ATF) is going to be fully free and redistributable by Replicant. | |
8 | | GPU | Vivante GC7000Lite | * Supported in mainline Mesa by etnaviv driver. | |
||
9 | 9 | Sebastian Krzyszkowiak | | Display | 5.7″ 720x1440 display | | |
10 | | Memory | 3GB RAM LPDDR4-3200 | | |
||
11 | 11 | dl lud | | Storage | 32GB eMMC |
12 | microSD slot | | |
||
13 | 10 | dl lud | | Wireless | Redpine RS9116 802.11abgn 2.4 Ghz / 5Ghz + Bluetooth 5 & BLE | * Firmware loaded from an on-board flash memory. | |
14 | 9 | Sebastian Krzyszkowiak | | Audio | Wolfson Media WM8962 | | |
15 | 10 | dl lud | | Baseband | Gemalto PLS8 or Broadmobi BM818 on replaceable M.2 card | * Single SIM. |
16 | * Both modems use QMI and AT. |
||
17 | * Connected via USB and I2S. |
||
18 | * On-modem GNSS receiver has disabled antenna. | |
||
19 | 13 | Sebastian Krzyszkowiak | | GPS | TESEO LIV3F multiconstellation GNSS receiver | * NMEA over UART | |
20 | 9 | Sebastian Krzyszkowiak | | Motion sensor | STmicroelectronicts LSM9DS1 | | |
21 | | ALS/proximity | Vishay VCNL4040 | | |
||
22 | 10 | dl lud | | Smartcard | 3FF format smart cards | * Early batches use 2FF format card. |
23 | 8 | Sebastian Krzyszkowiak | TODO: |
24 | 1 | Denis 'GNUtoo' Carikli | * How is it connected? |
25 | 10 | dl lud | * What Android frameworks exist for smartcards? | |
26 | 9 | Sebastian Krzyszkowiak | | Back Camera w/LED flash | 1/3" 13Mpx CMOS sensor, S5K3L6XX; 4224×3136 active pixels; |
27 | 10 | dl lud | 30fps @4K, 60fps @FHD, 120fps @HD; focusing range: 10cm - ∞ @AF; FOV: 81.5° | * No drivers yet. | |
28 | 9 | Sebastian Krzyszkowiak | | Front Camera | 1/4" 8Mpx CMOS sensor, YACG4D0C9SHC; 3264×2448 active pixels; |
29 | 10 | dl lud | 30fps @QUXGA, 60fps @FHD (Crop), 90fps @HD; focusing range: 28.9-65.0cm; FOV: 83.3° | * No drivers yet. | |
30 | 9 | Sebastian Krzyszkowiak | | USB | USB-C functions handled by TPS65982 |
31 | 10 | dl lud | Charging handled by TI BQ25895 |
32 | Battery monitored by MAX17055 | * USB-C connector for: PD charging, USB 3.0 client and host function, DisplayPort |
||
33 | * Doesn't require non-free firmware to use the video out (via USB-C DisplayPort alt-mode). | |
||
34 | 7 | dl lud | |
35 | 1 | Denis 'GNUtoo' Carikli | h2. Schematics |
36 | |||
37 | 5 | Denis 'GNUtoo' Carikli | https://source.puri.sm/Librem5/l5-schematic/ |
38 | 1 | Denis 'GNUtoo' Carikli | |
39 | 14 | Denis 'GNUtoo' Carikli | h2. Links |
40 | 1 | Denis 'GNUtoo' Carikli | |
41 | * https://shop.puri.sm/shop/librem-5/ |
||
42 | * https://puri.sm/posts/librem-5-smartphone-final-specs-announced/ |
||
43 | * https://developer.puri.sm/Librem5/Hardware_Reference.html |
||
44 | 14 | Denis 'GNUtoo' Carikli | * https://arstechnica.com/gadgets/2020/01/librem-5-phone-hands-on-a-proof-of-concept-for-the-open-source-smartphone/ |