Project

General

Profile

Librem5Phone » History » Version 15

Denis 'GNUtoo' Carikli, 02/10/2020 10:24 PM

1 1 Denis 'GNUtoo' Carikli
h1. Librem5
2
3 8 Sebastian Krzyszkowiak
Two early batches (Birch and Chestnut) of Librem 5 are already in the hands of backers and developers. Another batch, Dogwood, is expected in March 2020 and then a mass produced one, Evergreen, in Q2 2020.
4
5 9 Sebastian Krzyszkowiak
|_. Component | Hardware | Comments |
6 12 Denis 'GNUtoo' Carikli
| SoC | iMX8M Quad CPU |  * The non-free DDR4 controller firmware is "handled by a M4 core present in the SoC":https://puri.sm/posts/librem5-solving-the-first-fsf-ryf-hurdle/ and will be on a separate flash chip (so Replicant won't have to redistribute it).
7 10 dl lud
* The bootloader (u-boot + ATF) is going to be fully free and redistributable by Replicant. |
8
| GPU |  Vivante GC7000Lite | * Supported in mainline Mesa by etnaviv driver. |
9 9 Sebastian Krzyszkowiak
| Display | 5.7″ 720x1440 display | |
10
| Memory | 3GB RAM LPDDR4-3200 | |
11 11 dl lud
| Storage | 32GB eMMC
12
microSD slot | |
13 15 Denis 'GNUtoo' Carikli
| Wireless | Redpine RS9116 802.11abgn 2.4 Ghz / 5Ghz + Bluetooth 5 & BLE | * Firmware loaded from an on-board flash memory.
14
* Removable[1] |
15 9 Sebastian Krzyszkowiak
| Audio | Wolfson Media WM8962 | |
16 10 dl lud
| Baseband | Gemalto PLS8 or Broadmobi BM818 on replaceable M.2 card | * Single SIM.
17 1 Denis 'GNUtoo' Carikli
* Both modems use QMI and AT.
18
* Connected via USB and I2S.
19 15 Denis 'GNUtoo' Carikli
* On-modem GNSS receiver has disabled antenna.
20
* Removable[1] |
21 13 Sebastian Krzyszkowiak
| GPS | TESEO LIV3F multiconstellation GNSS receiver | * NMEA over UART |
22 9 Sebastian Krzyszkowiak
| Motion sensor | STmicroelectronicts LSM9DS1 | |
23
| ALS/proximity | Vishay VCNL4040 | |
24 10 dl lud
| Smartcard | 3FF format smart cards | * Early batches use 2FF format card.
25 8 Sebastian Krzyszkowiak
TODO: 
26 1 Denis 'GNUtoo' Carikli
* How is it connected? 
27 10 dl lud
* What Android frameworks exist for smartcards? |
28 9 Sebastian Krzyszkowiak
| Back Camera w/LED flash | 1/3" 13Mpx CMOS sensor, S5K3L6XX; 4224×3136 active pixels;
29 10 dl lud
30fps @4K, 60fps @FHD, 120fps @HD; focusing range: 10cm - ∞ @AF; FOV: 81.5° | * No drivers yet. |
30 9 Sebastian Krzyszkowiak
| Front Camera | 1/4" 8Mpx CMOS sensor, YACG4D0C9SHC; 3264×2448 active pixels;
31 10 dl lud
30fps @QUXGA, 60fps @FHD (Crop), 90fps @HD; focusing range: 28.9-65.0cm; FOV: 83.3° | * No drivers yet. |
32 9 Sebastian Krzyszkowiak
| USB | USB-C functions handled by TPS65982
33 10 dl lud
Charging handled by TI BQ25895
34 1 Denis 'GNUtoo' Carikli
Battery monitored by MAX17055 | * USB-C connector for: PD charging, USB 3.0 client and host function, DisplayPort
35
* Doesn't require non-free firmware to use the video out (via USB-C DisplayPort alt-mode). |
36 15 Denis 'GNUtoo' Carikli
37
h2. References
38
39
fn1. from #purism: 23:16 < MrChromebox> GNUtoo: yes, they are removable/replaceable, that's a design feature not likely to change
40 7 dl lud
41 1 Denis 'GNUtoo' Carikli
h2. Schematics
42
43 5 Denis 'GNUtoo' Carikli
https://source.puri.sm/Librem5/l5-schematic/
44 1 Denis 'GNUtoo' Carikli
45 14 Denis 'GNUtoo' Carikli
h2. Links
46 1 Denis 'GNUtoo' Carikli
47
* https://shop.puri.sm/shop/librem-5/
48
* https://puri.sm/posts/librem-5-smartphone-final-specs-announced/
49
* https://developer.puri.sm/Librem5/Hardware_Reference.html
50 14 Denis 'GNUtoo' Carikli
* https://arstechnica.com/gadgets/2020/01/librem-5-phone-hands-on-a-proof-of-concept-for-the-open-source-smartphone/