Project

General

Profile

Librem5Phone » History » Version 8

Sebastian Krzyszkowiak, 01/26/2020 08:56 PM

1 1 Denis 'GNUtoo' Carikli
h1. Librem5
2
3 8 Sebastian Krzyszkowiak
Two early batches (Birch and Chestnut) of Librem 5 are already in the hands of backers and developers. Another batch, Dogwood, is expected in March 2020 and then a mass produced one, Evergreen, in Q2 2020.
4
5 1 Denis 'GNUtoo' Carikli
|_. Component | Comments |
6
| Processor: iMX8M Quad CPU |  * See "this post":https://puri.sm/posts/librem5-solving-the-first-fsf-ryf-hurdle/ about the nonfree DDR4 controller firmware
7 8 Sebastian Krzyszkowiak
* The bootloader (u-boot + ATF) is going to be fully free and redistributable by Replicant |
8
| GPU: Vivante GC7000Lite | supported in mainline mesa by etnaviv driver |
9
| Display : 5.7″ 720x1440 display
10
Memory: 3GB RAM LPDDR4-3200
11
eMMC: 32GB
12
microSD | TODO:
13 1 Denis 'GNUtoo' Carikli
* Check the if the Android 9 requirements are met |
14 8 Sebastian Krzyszkowiak
| Wireless : Redpine RS9116 802.11abgn 2.4 Ghz / 5Ghz + Bluetooth 5 & BLE | with firmware loaded from an on-board flash memory |
15
| Audio: Wolfson Media WM8962 | |
16
| Baseband : Gemalto PLS8 or Broadmobi BM818 on replaceable M.2 card | * single SIM
17
* both modems use QMI and AT
18
* connected via USB and I2S
19
* on-modem GNSS receiver has disabled antenna |
20 1 Denis 'GNUtoo' Carikli
| GPS : TESEO LIV3F multiconstellation GNSS receiver | TODO:
21
* What protocol are used |
22 8 Sebastian Krzyszkowiak
| Motion sensor: STmicroelectronicts LSM9DS1 | |
23
| ALS/proximity: Vishay VCNL4040 | |
24
| Smartcard: yes for 3FF format smart cards | early batches use 2FF format card
25
TODO: 
26 1 Denis 'GNUtoo' Carikli
* How is it connected? 
27
* What Android frameworks do exist for smartcards |
28 8 Sebastian Krzyszkowiak
| Back Camera w/LED flash: 1/3" 13Mpx CMOS sensor, S5K3L6XX; 4224×3136 active pixels;
29
30fps @4K, 60fps @FHD, 120fps @HD; focusing range: 10cm - ∞ @AF; FOV: 81.5° | no drivers yet |
30
| Front Camera: 1/4" 8Mpx CMOS sensor, YACG4D0C9SHC; 3264×2448 active pixels;
31
30fps @QUXGA, 60fps @FHD (Crop), 90fps @HD; focusing range: 28.9-65.0cm; FOV: 83.3° | no drivers yet |
32
| USB: USB-C connector for PD charging, USB 3.0 client and host function, DisplayPort | doesn't require a nonfree firmware to use the video out (via USB-C DisplayPort alt-mode)
33
USB-C functions handled by TPS65982
34
charging handled by TI BQ25895
35
battery monitored by MAX17055 |
36 7 dl lud
37 1 Denis 'GNUtoo' Carikli
h2. Schematics
38
39 5 Denis 'GNUtoo' Carikli
https://source.puri.sm/Librem5/l5-schematic/
40 1 Denis 'GNUtoo' Carikli
41
h2. References
42
43
* https://shop.puri.sm/shop/librem-5/
44
* https://puri.sm/posts/librem-5-smartphone-final-specs-announced/
45 8 Sebastian Krzyszkowiak
* https://developer.puri.sm/Librem5/Hardware_Reference.html