NecunosNC1 » History » Version 3
Denis 'GNUtoo' Carikli, 07/07/2019 09:17 PM
1 | 1 | Denis 'GNUtoo' Carikli | h1. Necuno Mobile |
---|---|---|---|
2 | |||
3 | |_. Component | Comments | |
||
4 | | ARM® Cortex®-A9 NXP i.MX6 |
||
5 | Locked bootloader: NO |
||
6 | 2 | Denis 'GNUtoo' Carikli | Binary blobs: NO | * Will have an unsigned and free software bootloader | |
7 | 1 | Denis 'GNUtoo' Carikli | | GPU: Vivante (Etnaviv with hardware acceleration) | TODO: |
8 | * We'll need to look into how to integrate 3D acceleration into Replicant | |
||
9 | | Display: 5.0" |
||
10 | Memory: 1GB | TODO: |
||
11 | * check if it meets Android 9 requirements | |
||
12 | | WLAN: WiFi (via SDIO) WL1801 (2.4 GHz) | TODO: |
||
13 | * What chip will be used | |
||
14 | | Charging: Micro-USB, Data transfer disabled |
||
15 | Ethernet: High speed 100Mb/s | TODO: |
||
16 | * Find how to install Replicant | |
||
17 | | Serial: Internal | This will probably require to disassemble the device to do the very early port | |
||
18 | 3 | Denis 'GNUtoo' Carikli | |
19 | h2. References. |
||
20 | |||
21 | * The "specifications":https://necunos.com/community/ are on the Necuno Solutions website. |