Project

General

Profile

PromotionalMedia » History » Revision 8

Revision 7 (dl lud, 01/07/2020 12:42 AM) → Revision 8/9 (Adonay Felipe Nogueira, 02/24/2020 07:28 PM)

h1. Promotional Media 

 h2. Banner 

 !banner.png! 

 * attachment:banner.svg - SVG version produced with Inkscape. 
 * attachment:banner.sla - Preferred version, in SLA, produced with Scribus due to better colour profiling support. 
 * attachment:banner.pdf - Final export for printing, in CMYK (ISO Coated v2) colour profile. 

 So far one unit was printed on a 1200x600 mm PVC tarpaulin with reinforced edges and grommets. Meant to be used at [[36C3]], [[FOSDEM2020|FOSDEM 2020]] and other future conferences where Replicant will have a stand. 

 The full reasoning behind the simple design, as well as previous iterations, can be checked at the "Assembly at 36C3 - Banner Idea":https://lists.osuosl.org/pipermail/replicant/2019-November/002228.html thread on the Replcaint mailing list. 

 h3. Addons 

 To spice up the banner, strips of paper are hanged from the grommets on the lower side of the banner. They act much like a "MOTD":https://en.wikipedia.org/wiki/Motd_(Unix) or a roadside letter board, containing jokes or catchy sentences that can be changed every day of the conference. Examples are: 

 > Want to know if your phone phones home? 

 > Take the red pill! 

 > Tired of phony privacy? Let's get into the rabbit hole. 

 h3. License 

 Copyright © 2019 @adfeno ([[People#Adonay-Felipe-Nogueira|conctact information]]) 
 Licensed under the "Creative Commons Attribution-ShareAlike 4.0 International License":http://creativecommons.org/licenses/by-sa/4.0/. 
 With contributions from: @dllud, [[People#Denis-GNUtoo-Carikli|GNUtoo]], TJ and user#3003. 
 Based upon the [[Artwork|Replicant Artwork]] with [[Artwork#Typeface|League Gothic typeface]]. 

 h2. Flyers 

 !good-front.png! !good-back.png! 
 !bad-front.png! !bad-back.png! 
 !ugly-front.png! !ugly-back.png! 

 * attachment:flyers.tar.gz - Includes the SLA file, produced with Scribus, with all flyers, alongside with the required resources (e.g. backgrounds). 
 * attachment:flyers-export.tar.gz - PDF exports for printing, in CMYK (ISO Coated v2) colour profile and with a 2 mm bleed. 

 These flyers are yet another reinterpretation of the "The Good, the Bad and the Ugly":https://en.wikipedia.org/wiki/The_Good,_the_Bad_and_the_Ugly#In_popular_culture. As the Wikipedia article puts it: 
 > the respective phrases refer to upsides, downsides and the parts that could, or should have been done better, but were not. 
 * "The Good enough" is a phone that meets and perhaps goes beyond "RYF":https://ryf.fsf.org/. 
 * "The Bad subjugation" is a phone, much like many that are sold nowadays, that gets everything wrong and poses all kinds of threats to user's freedom and privacy. 
 * "The Ugly hack" is Replicant, something that grabs "The Bad subjugation" and then tries (and fails) to make it behave like "The Good enough". 

 The full reasoning behind the flyers content and design, as well as previous iterations, can be checked at the "Assembly at 36C3 - Illustrate freedom, privacy and security issues":https://lists.osuosl.org/pipermail/replicant/2019-November/002233.html thread on the Replcaint mailing list. 

 So far, 250 units of each flyer were printed and distributed at [[36C3]], with left-overs remaining for [[FOSDEM2020|FOSDEM 2020]]. 

 h3. License 

 Copyright © 2019 @adfeno ([[People#Adonay-Felipe-Nogueira|conctact information]]) 
 Licensed under the "Creative Commons Attribution-ShareAlike 4.0 International License":http://creativecommons.org/licenses/by-sa/4.0/. 
 With contributions from: @dllud, [[People#Denis-GNUtoo-Carikli|GNUtoo]] and user#3003.