Project

General

Profile

QMI-RIL » History » Version 32

Kurtis Hanna, 08/25/2019 09:07 PM
added link to oFono presentation

1 29 Denis 'GNUtoo' Carikli
h1. TODO
2
3
See also the following links:
4
* https://github.com/scintill/android_frameworks_opt_telephony_ril_ofono
5 31 Kurtis Hanna
* https://redmine.replicant.us/issues/1813
6 32 Kurtis Hanna
* Replicant and oFono based Java RIL Presentation: https://redmine.replicant.us/projects/replicant/wiki/ContributorsMeetingJuly2019#Presentations
7 31 Kurtis Hanna
* https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/clk/qcom/gcc-mdm9615.c?h=v5.2.7
8 29 Denis 'GNUtoo' Carikli
9 1 Wolfgang Wiedmeyer
h1. QMI-RIL
10
11
This page covers development efforts to create a "Radio Interface Layer":https://en.wikipedia.org/wiki/Radio_Interface_Layer (RIL) for modems that use the Qualcomm MSM Interface (QMI) protocol. The work is currently carried out for the Galaxy S 3 4G (I9305) which has a Qualcomm MDM9615 modem. The Galaxy Note 2 4G (t0lte) uses the same modem and this device could be supported as well in Replicant when the QMI-RIL is ready. We will hopefully identify further candidates that have an isolated modem using the QMI protocol and for which Replicant support could be added. Among the non-Android devices, the iPhone 5  is one that "uses the MDM9615 modem":https://www.theiphonewiki.com/wiki/MDM9615 as well.
12 2 Wolfgang Wiedmeyer
13 6 Wolfgang Wiedmeyer
"relevant thread on libqmi mailing list":https://lists.freedesktop.org/archives/libqmi-devel/2017-February/002089.html
14
15 2 Wolfgang Wiedmeyer
h2. Modem boot
16
17 17 Wolfgang Wiedmeyer
h3. Background
18 3 Wolfgang Wiedmeyer
19 17 Wolfgang Wiedmeyer
When the MDM9615 modem is activated, it first boots into a Download mode. There, firmware, bootloaders and EFS files are uploaded to the modem via a serial interface. The used protocol is called SAHARA and it is a proprietary protocol developed by Qualcomm. The protocol covers various functionalities. We likely only need to implement a very small subset that is responsible for transferring firmware and other files to the modem and synchronising changes to EFS files with the filesystem. Being able to retrieve RAM dumps from the modem would also be helpful for debugging. In case of a fatal error, the Linux kernel already requests RAM dumps from the modem, so only the file transfer part needs to be implemented.
20 2 Wolfgang Wiedmeyer
21 17 Wolfgang Wiedmeyer
Qualcomm provides the proprietary tool kickstart for uploading the files to the modem. It is run by the daemon qcks. After the modem is booted, qcks spawns efsks which is responsible for EFS sync.
22
23 1 Wolfgang Wiedmeyer
Logcat and dmesg output of the upload: attachment:ks_logcat, attachment:ks_dmesg
24
25 30 Joey Hewitt
"libopenpst":https://github.com/openpst/libopenpst, their "sahara":https://github.com/openpst/sahara tool, and "Linaro's QDL code":http://git.linaro.org/landing-teams/working/qualcomm/qdl.git/log/ can be used as a reference to implement the file upload and as documentation about the protocol. The "kernel":https://git.replicant.us/replicant/kernel_samsung_smdk4412 itself can be checked for the different boot modes. 
26 17 Wolfgang Wiedmeyer
27
h3. Implementation
28
29 22 Wolfgang Wiedmeyer
An initial version of the modem boot part is completed and a tool called @modem-boot@ is available as part of the qmi-ril repo: https://git.replicant.us/contrib/wiewo/qmi-ril/
30 19 Wolfgang Wiedmeyer
It uploads the needed files in the Download mode and reboots the modem. The files are uploaded from a directory that @qcks@ uses to prepare the files. This preparation step (reading data from partitions and preparing them in a certain way before the upload) needs to be implemented. Otherwise, updates to the EFS partitions aren't used at the next boot of the modem.
31 22 Wolfgang Wiedmeyer
During regular operation of the modem, EFS data is received. The data is not yet written to the EFS partition. This step needs to be implemented as well.
32 19 Wolfgang Wiedmeyer
See the commit messages for more details.
33 4 Wolfgang Wiedmeyer
34
h2. QMI protocol
35 1 Wolfgang Wiedmeyer
36 23 Wolfgang Wiedmeyer
"libqmi":https://www.freedesktop.org/wiki/Software/libqmi/ is a library that implements the QMI protocol and it will be used for implementing the RIL. The source code for the command-line tool @qmicli@, which is part of libqmi, and "ModemManager's":https://cgit.freedesktop.org/ModemManager/ModemManager code is helpful for figuring out how to use libqmi.
37 1 Wolfgang Wiedmeyer
38 26 Wolfgang Wiedmeyer
libqmi needs the cdc-wdm and qmi_wwan kernel drivers for communicating with the modem. These are backported to the smdk4412 kernel on the "qmi branch":https://code.fossencdi.org/kernel_samsung_smdk4412.git/log/?h=qmi. The qmi_wwan driver replaces the RMNET usb driver that the blobs use for a network interface to the modem. Some missing code in the backported qmi_wwan driver was ported from the RMNET driver. The commit messages offer more details.
39 23 Wolfgang Wiedmeyer
40 1 Wolfgang Wiedmeyer
libqmi provides the command-line tool @qmicli@ to communicate with the modem. It was already successfully tested on the S 3 4G. Using the modem boot tool described above and the qmi branch of the kernel, @qmicli@ is usable with only free software.
41 23 Wolfgang Wiedmeyer
42
The "RIL header":https://git.replicant.us/LineageOS-mirror/android_hardware_ril/tree/include/telephony/ril.h?h=cm-13.0 documents the Android side of the interface and the commands that need to be implemented. The [[Samsung-RIL]] page also offers some documentation in that regard.
43
44
h3. Status of QMI-RIL
45
46 28 Wolfgang Wiedmeyer
An initial version of QMI-RIL is available in the "qmi-ril repo":https://git.replicant.us/contrib/wiewo/qmi-ril/ See "this commit message":https://git.replicant.us/contrib/wiewo/qmi-ril/commit/?id=f35a9bbd1ebb52433f313c675fbe01bb1ca96d7d for the status details.
47
The device-specific repos for i9305 need to use these two branches to make the RIL work:
48
https://code.fossencdi.org/device_samsung_i9305.git/log/?h=qmi-wip
49
https://git.replicant.us/contrib/wiewo/device_samsung_smdk4412-qcom-common/log/?h=replicant-6.0
50
51 15 Wolfgang Wiedmeyer
52 7 Wolfgang Wiedmeyer
h2. Cross-compiling libqmi for Android on ARM
53 1 Wolfgang Wiedmeyer
54 20 Wolfgang Wiedmeyer
These instructions can be used to build libqmi and include it in an image for the Galaxy S 3 4G. See the [[GalaxyS3I9305Build|build instructions for the Galaxy S 3 4G]] for building the image.
55
56 27 Wolfgang Wiedmeyer
Android.mk files need to be written to integrate libqmi and its dependencies into a regular device build. Some of the source code is auto-generated and some dependencies like GLib have a lot of source files, so writing the Android Makefiles will be some work. For GLib, these commits could be used for creating the Android.mk files:
57 20 Wolfgang Wiedmeyer
https://github.com/scintill/android_external_glib/commit/9bc8d813979140b8abdad77619aba20f08b19c6f
58
https://github.com/scintill/android_external_glib/commit/ae860f678520471da44823f500f302a1a27c1be9
59
They are for GLib 2.32, but libqmi requires at least GLib 2.36, so they need to be ported to that version. It looks like that with these Makefiles, only libiconv is required as an additional dependency for GLib. For libiconv, the Makefiles from this commit could be helpful:
60
https://github.com/tguillem/android-libiconv/commit/8be7e8a7670abf251d6198606098a1908ec1033c 
61 7 Wolfgang Wiedmeyer
62 13 Wolfgang Wiedmeyer
Based on "these instructions":https://zwyuan.github.io/2016/07/17/cross-compile-glib-for-android/
63
64 8 Wolfgang Wiedmeyer
h3. Dependencies
65
66
<pre>
67 11 Wolfgang Wiedmeyer
apt-get install groff libltdl-dev pkg-config gtk-doc-tools
68 8 Wolfgang Wiedmeyer
</pre>
69
70 7 Wolfgang Wiedmeyer
h3. Getting the source code
71
72 1 Wolfgang Wiedmeyer
<pre>
73 13 Wolfgang Wiedmeyer
git clone https://code.fossencdi.org/external_libqmi.git external/libqmi
74 1 Wolfgang Wiedmeyer
git clone https://git.savannah.gnu.org/git/libiconv.git external/libiconv -b v1.15
75 7 Wolfgang Wiedmeyer
git clone https://github.com/libffi/libffi external/libffi -b v3.2.1
76 13 Wolfgang Wiedmeyer
git clone https://code.fossencdi.org/external_gettext.git external/gettext
77 1 Wolfgang Wiedmeyer
git clone https://github.com/GNOME/glib external/glib -b 2.52.3
78 13 Wolfgang Wiedmeyer
</pre>
79
80
h3. Configure and build
81
82
The attached script attachment:qmi_build_envsetup.sh makes it more convenient to configure the environment. You need to set the Replicant source tree root folder as the @REPLICANT_BASE@ variable at the top of the script. Then you can source it:
83
<pre>
84
. path/to/qmi_build_envsetup.sh
85
</pre> 
86
87 14 Wolfgang Wiedmeyer
It's recommended to not run this and the following commands in the same shell you use for building a Replicant image as the environment variables break the Replicant build. Run the commands after you built an image for the I9305.
88 13 Wolfgang Wiedmeyer
89
h4. libiconv
90
91
<pre>
92
./autogen.sh
93 1 Wolfgang Wiedmeyer
./configure --build=${BUILD_SYSTEM} --host=arm-eabi --prefix=${PREFIX} --disable-rpath
94 14 Wolfgang Wiedmeyer
make install -j8
95
</pre>
96
97
If @autoconf-2.69@ and @autoheader-2.69@ are not found, remove the @-2.69@ suffix from the @AUTOCONF@ and @AUTOHEADER@ variables in @Makefile.devel@, @libcharset/Makefile.devel@ and @preload/Makefile.devel@.
98
99
h4. libffi
100
101
<pre>
102
./autogen.sh
103
sed -e '/^includesdir/ s/$(libdir).*$/$(includedir)/' -i include/Makefile.in
104
sed -e '/^includedir/ s/=.*$/=@includedir@/' -e 's/^Cflags: -I${includedir}/Cflags:/' -i libffi.pc.in
105
./configure --build=${BUILD_SYSTEM} --host=arm-eabi --prefix=${PREFIX} --enable-static
106
make install -j8
107
</pre> 
108
109 21 Wolfgang Wiedmeyer
h4. gettext (probably not needed)
110 14 Wolfgang Wiedmeyer
111
<pre>
112
./autogen.sh
113
./configure --build=${BUILD_SYSTEM} --host=arm-eabi --prefix=${PREFIX} --disable-rpath --disable-libasprintf --disable-java --disable-native-java --disable-openmp --disable-curses
114
make install -j8
115
</pre>
116
117
h4. glib
118
119
First, the file @android.cache@ with the following content needs to be created:
120
<pre>
121
glib_cv_long_long_format=ll
122
glib_cv_stack_grows=no
123
glib_cv_sane_realloc=yes
124
glib_cv_have_strlcpy=no
125
glib_cv_va_val_copy=yes
126
glib_cv_rtldglobal_broken=no
127
glib_cv_uscore=no
128
glib_cv_monotonic_clock=no
129
ac_cv_func_nonposix_getpwuid_r=no
130
ac_cv_func_posix_getpwuid_r=no
131
ac_cv_func_posix_getgrgid_r=no
132
glib_cv_use_pid_surrogate=yes
133
ac_cv_func_printf_unix98=no
134
ac_cv_func_vsnprintf_c99=yes
135
ac_cv_func_realloc_0_nonnull=yes
136
ac_cv_func_realloc_works=yes
137
</pre>
138
139
Make it read-only:
140
<pre>
141
chmod 444 android.cache
142
</pre>
143
144
Then configure and build:
145
<pre>
146
./autogen.sh --build=${BUILD_SYSTEM} --host=${TOOLCHAIN_PREFIX} --prefix=${PREFIX} --disable-dependency-tracking --cache-file=android.cache --enable-included-printf --enable-static --with-pcre=no --enable-libmount=no
147
make install -j8
148
</pre>
149
150
h4. libqmi
151
152
<pre>
153 21 Wolfgang Wiedmeyer
./autogen.sh --build=${BUILD_SYSTEM} --host=${TOOLCHAIN_PREFIX} --prefix=${PREFIX} --enable-mbim-qmux=false --enable-firmware-update=false --enable-qmi-username=radio --without-udev --disable-mm-runtime-check  --with-udev-base-dir=${PREFIX}/etc/udev
154 13 Wolfgang Wiedmeyer
make install -j8
155 7 Wolfgang Wiedmeyer
</pre>