Project

General

Profile

Actions

Libsamsung-ril » History » Revision 8

« Previous | Revision 8/48 (diff) | Next »
Denis 'GNUtoo' Carikli, 01/14/2012 09:27 PM


samsung-ril

The samsung ril is the library that interfaces libsamsung-ipc(see below) with the android framework.
Status per devices below:

Nexus S
Functionality Status
Data activation Working since trunk of 14/01/2012
Data deactivation Work in progress
Calls with audio working in the image 0002 (replicant 2.3)
SMS working in the image 0002 (replicant 2.3)
DTMF Work in progress

libsamsung-ipc

libsamsung-ipc is a free implementation of the protocol to speak with modems found in most Samsung devices. It is the low-level library used to communicate with the modem and needs an upper-layer (RIL) to interface with the system.

libsamsung-ipc is shared between SHR and Replicant projects. It's used in both for the Nexus S.

Source code is available under the GPLv3+ at: https://github.com/morphis/libsamsung-ipc (master branch).

The library is mostly complete

ipc-modemctrl

ipc-modemctrl is a deprecated tool that was used at the beginning of the work for talking to the nexus S modem. It implemented basic functionalities (mostly SIM unlocking and network registration).

Usage:

usage: ipc-modemctrl <command>
commands:
    start                 bootstrap modem and start read loop
    power-on              power on the modem
    power-off             power off the modem
arguments:
    --debug               enable debug messages
    --pin=[PIN]           provide SIM card PIN

Please run ipc-modemctrl like this (from host pc):


assuming your SIM PIN is 1234. If you don't have any SIM pin, don't pass the --pin argument. 

It should go like this:
<pre>
[I] Got SIM PIN!
r0 Starting modem on FMT client
r1 Starting modem_read_loop on FMT client
r2 Phone is powered up (LPM)!
[I] SIM card found
[I] SIM is initializing
r3 SIM init complete
r4 Modem is ready, requesting normal power mode
[I] SIM card found
[I] SIM is initializing
r3 SIM init complete
r5 Modem is fully ready
[I] Registered with network successfully!
r6 Registered with network! Got PLMN (Mobile Network Code): '20810'
[I] Registered with network successfully!
r6 Registered with network! Got PLMN (Mobile Network Code): '20810'
[I] Registered with network successfully!
[I] Registered with network successfully!
r6 Registered with network! Got PLMN (Mobile Network Code): '20810'
[I] SIM Phone Book init complete
</pre>

<pre>

h2. Status

We were able to make the following work:
* SMS (Rx/Tx)
* Call (Rx/Tx) BUT NO AUDIO YET
* GPRS 
* SIM I/O (stored contacts, etc)
* SIM PIN unlocking

Updated by Denis 'GNUtoo' Carikli over 12 years ago · 8 revisions

Also available in: PDF HTML TXT