Project

General

Profile

Actions

UART » History » Revision 17

« Previous | Revision 17/93 (diff) | Next »
Denis 'GNUtoo' Carikli, 11/27/2018 05:16 PM


Serial port

There is an in-depth article covering several Samsung devices in the SamsungSerial page

Settings

Device I/O voltage ID<->GND SOC TX SOC RX switch Comments
I9300 1.8V (measured between USB GND and USB VCC) 619kOhms D- D+ It gives a shell once Replicant has booted
Nexus S 150 kOhm FSA9480
Galaxy Nexus
Optimus Black N/A1

1 Code is required to use the switch as you need to configure both the MUIC and DP3T switch

Updated by Denis 'GNUtoo' Carikli over 5 years ago · 17 revisions

Also available in: PDF HTML TXT