Browsing the source code¶
There is one branch per Replicant version, such as
Before downloading the Replicant source code, make sure there is a considerable amount of disk space left on the drive you intend to build Replicant on.
It is advised to have 60-70GiB available for the Replicant source code and the produced files for one device. If you intend to build for multiple devices, every additional device will need ca. 17GiB.
Source tree root folder¶
The path to the source tree root folder must not contain spaces.
Installing the repo tool¶
Warning: to install the repo tool for Replicant 6 and before, please follow instructions here.
Following instructions are only to be followed for Replicant versions greater than 6.
To be able download the complete source code, the
repo tool needs to be installed. The distribution you are using may already have the tool packaged and it may already been installed as part of the Build dependencies installation.
It is recommended to install the
repo tool with the package manager. However, if the
repo tool is not available on your system, you can download and install it locally:
mkdir tools cd tools wget https://commondatastorage.googleapis.com/git-repo-downloads/repo chmod a+x repo cd ../
In the following, it is assumed that
repo is installed from your system's package manager. If you have installed
repo locally in
at the beginning of the following commands.
Initializing the repository¶
The source manifest is the list of all the git repositories that are present in the Replicant tree.
Each Replicant version has a dedicated branch with the proper source manifest.
Replicant 6.0 release version¶
mkdir replicant-6.0 cd replicant-6.0 repo init -u https://git.replicant.us/replicant/manifest.git -b replicant-6.0
Replicant 6.0 0004 RC2¶
mkdir replicant-6.0 cd replicant-6.0 repo init -u https://git.replicant.us/replicant/manifest.git -b refs/tags/replicant-6.0-0004-rc2
Replicant 6.0 development version¶
mkdir replicant-6.0-dev cd replicant-6.0-dev repo init -u https://git.replicant.us/replicant/manifest.git -b replicant-6.0-dev
mkdir replicant-4.2 cd replicant-4.2 repo init -u https://git.replicant.us/replicant/manifest.git -b replicant-4.2
mkdir replicant-4.0 cd replicant-4.0 repo init -u https://git.replicant.us/replicant/manifest.git -b replicant-4.0
mkdir replicant-2.3 cd replicant-2.3 repo init -u https://git.replicant.us/replicant/manifest.git -b replicant-2.3
mkdir replicant-2.2 cd replicant-2.2 repo init -u https://git.replicant.us/replicant/manifest.git -b replicant-2.2
Downloading/Updating the source code¶
Now that you have configured
repo, you can start downloading Replicant sources for the desired version.
This step is very long and can take hours to complete!
For the Replicant 6.0 release branch, it is possible and recommended to verify the signatures of the Git tags in all repositories:ReplicantSourceCodeTagsVerification
Warning: following instructions are only for Replicant 6.0 0003 and before.
Once the source code is ready, you need to get the prebuilt applications (they are downloaded from F-Droid). Since Replicant 6.0, the prebuilt applications are checked if they were signed with the F-Droid signing key. The signing key can be retrieved and added to your GPG keyring using:
gpg --keyserver hkps://keyserver.ubuntu.com --recv-key 37D2C98789D8311948394E3E41E7044E1DBA2E89
Then you can download the prebuilts:
You must redo these steps each time you want to sync your tree, in order to keep it up to date. Future syncs are faster than the first one.
Supported protocols for building Replicant¶
While the git.replicant.us git server supports
https:// are supported for building Replicant.
This is because over time we need to move or rename repositories for various reasons. And in order to avoid breaking older Replicant versions (including specific releases that are tagged and that can't be modified anymore), we use
https:// redirects, but we don't have any redirects with
Using symlinks also doesn't scale as it has the side effect of making a repository appear multiple times in the cgit web interface that is used to display the repositories like the Replicant specific repositories for instance.