Project

General

Profile

Actions

TasksFunding » History » Revision 270

« Previous | Revision 270/284 (diff) | Next »
Denis 'GNUtoo' Carikli, 01/14/2020 12:59 PM


Funding

Funding procedure

Background and rationale for funding work through the NLnet foundation

The NLnet foundation managed to get some European Union grants to fund work on privacy and trust technologies.

It's then up to individuals to apply to it, and to define tasks that can improve privacy and trust on the Internet, which then the NLnet foundation can choose to fund.

This could for instance be used to fund the advancement of software (Tor, Replicant, etc) and hardware freedom (RISC-V, etc).

The only requirement (beside improving privacy and trust) seem to be that the project needs to have an European Union component (like the people applying for the grant living in the European union, etc).

They are then paid once tasks defined and/or the deliverables mentioned in the task have been completed.

The NLnet foundation also have some resources to help pushing changes upstream and try to push the applicants into making their work as useful as possible by engaging with upstream communities.

References:

Tasks accepted for funding by the NLnet foundation

The application criteria wrere handled by the NLnet foundation.

Discussions

There is a thread about funding on the mailing list about that

Mistakes

  • When submitting a task to the NLnet Foundation make sure to select a call in "Please select a call", like "NGI Privacy & Trust Enhancing Technologies". I for instance forgot to select the right call.
  • The amount requested was too high as the grant is not taxed. The amount was changed after the submission and acceptation.

Port Replicant to a newer Android version

Documents

Description

Replicant is currently based on LineageOS 13 which is based on Android 6.0.
It is becoming very urgent to upgrade Replicant to a newer release of Android, as Android 6.0 is not supported anymore. It would probably also make it way easier to fix the following issues:
  • Replicant is currently lagging behind with security fixes
  • Replicant cannot be built from a GNU/Linux distribution that follows the Free Software Distribution Guidelines
Hardware requirements :
  • A computer that is able to build Replicant.
  • A smartphone or tablet that can easily supported by the new version of Replicant and that meet Android 9 HardwareRequirements.
Expected outcomes:
  • Remove all proprietary components of LineageOS and make sure that Replicant follows the Free Software Distributions Guidelines"
  • Port all the changes needed to successfully boot without any proprietary software in Replicant
  • Make sure that most of the security issues are fixed, and lower the attack surface if possible.
  • Make sure that Replicant can be built on a GNU/Linux distribution that follows the Free Software Distributions Guidelines
  • Rebrand LineageOS as Replicant

Funding: We applied to https://nlnet.nl/PET

Graphics acceleration

Currently, all supported devices on Replicant lack a free software driver for their GPU. This means that OpenGL ES (GLES) rendering must be done on the CPU (software rendering). The current approach to software rendering on Replicant 6 is based on libAGL, an optimized GLES 1.x implementation that uses libpixelflinger software renderer. Development on both these libraries ceased in 2013 and no work was done to support newer GLES versions.
The major consequences of this are that:
  • Critical applications like web browsers crash due to lack of GLES 2.0 (#705). Replicant currently uses an out-dated browser that has many security flaws.
  • Replicant relies on patches to the Android framework to make things like the camera application work.
  • The rendering speed has degraded over the newer Android versions, like Android 6. Even applications that do not crash become difficult to use due to the huge rendering delays.

This task aims to fix all these severe issues by putting together a new graphics stack for the Android 9 port. This new graphics stack must be compatible with Android 9 Hardware Abstraction Layers (HAL) and provide at least GLES 2.0 rendering. It should be flexible enough to do software rendering with Mesa or SwiftShader (Google's current software renderer), and also GPU rendering on devices where a free GPU driver is available.

Joonas Kylmälä has done some introductory work on the Android 9 port for the i9305, and found a way to have it rendering to the screen. He put together a graphics stack composed of: gbm_gralloc (Gralloc HAL) + drm_hwcomposer (Hardware Composer HAL) + Mesa with kms_swrast driver with softpipe backend (CPU software renderer for GLES). This will be the starting point for this task.

Joonas' prototype shows that Replicant can use gbm_gralloc, an existing graphics memory allocator (gralloc) HAL maintained(ish) by Android-x86, in conjunction with drm-hwcomposer, a libre implementation of Android's Hardware Composer HAL based on Linux's DRM, to achieve software rendering with Mesa. This solution avoids the need to write a custom gralloc for Replicant, and takes advantage of the hardware acceleration for composition provided by drm-hwcomposer on devices with a free software DRM driver (e.g. exynos-based smartphones and tablets).

Much more testing is needed to confirm that gbm_gralloc can be the definitive gralloc HAL on Replicant 9. It still wasn't tried with SwiftShader, or even Mesa's llvmpipe backend, which is a must since the softpipe backend is too slow to be usable.
Joonas' tests showed that some other components will need our attention, mostly the drm/exynos driver. In order to make drm/exynos work with gbm_gralloc and drm-hwcomposer Joonas had to disable DRM-Auth and hack some missing pixel formats into it by using the default pixel format for everything. Besides drm/exynos, we will also have to make the graphics stack work with the virtual GEM (vGEM) driver, in order to support devices that lack a real drm driver.

The major and first goal of this task is thus to build upon Joonas's prototype and put together a stable and fully free graphics stack, compatible with GLES 2.0, that does software rendering through Mesa's llvmpipe with a decent performance.

Hardware requirements: A computer that is able to build Replicant. A Samsung Galaxy S3 or S3 4G to run the current Replicant 9 port.

Difficulty: Medium / Hard

Requirements/Prerequisites: Knowledge of C++, kernel interfaces knowledge or the ability to learn them

Expected outcomes:
  • Graphics stack with decent performance on software rendering
  • Working GLES 2.0 implementation
  • Fast enough graphics
  • F-Droid applications not crashing anymore because of GLES.

Time estimation:

Step man-hours
Set up the development environment, including the current Replicant 9 port on the test device. 24
Read AOSP documentation and understand all details of the graphics stack. 16
Adapt the build files to use Mesa's llvmpipe backend instead of softpipe. Fix potential LLVM version incompatibilities between Mesa and Android. 40
Properly implement the missing pixel formats in drm/exynos and try to have it merged into upstream. 72
Find a proper way to use DRM-Master and DRM-Auth with gbm_gralloc and drm-hwcomposer. 40
Create test scenarios and check if the graphics stack works as expected. Consider alternative grallocs if necessary. 40
Make the graphics stack work with vGEM driver besides drm/exynos. 40
Document the design decisions. 16
TOTAL 288

Subtasks

The following sub-tasks could also be worked on after finishing writing the gralloc:

SwiftShader

SwiftShader is Google's current software renderer that is capable of GLES 2.0 and is now under work to support Vulkan.

Mesa is the preferred renderer on Replicant for several reasons such as its support for both software and hardware (GPU) rendering, and its big community, with hundreds of active contributors. However, Mesa lacks a Vulkan software renderer. With Vulkan soon becoming a requirement for new Android versions, we must make sure that Replicant's graphics stack can use SwiftShader in order to become futureproof. Furthermore, SwiftShader was built with performance in mind, specially for ARM CPUs, and may bring speed improvements on some devices.

The goal of this sub-task is thus to create a compile-time or run-time option that allows using Replicant 9 with SwiftShader as it's software renderer instead of Mesa.

Hardware requirements: A computer that is able to build Replicant. A smartphone or tablet that is supported by Replicant to be able to test the result.

Difficulty: Medium

Requirements/Prerequisites: Knowledge of C++, Makefiles and git. Android's graphics stack knowledge or the ability to learn them.

Expected outcomes:
  • SwiftShader running on Replicant.
  • Working Vulkan implementation.

Time estimation: 40 man-hours.

llvmpipe optimizations

Mesa is a highly versatile library that can be extended with device drivers to allow it to be used in different environments ranging from software emulation to complete hardware acceleration. One such driver is the Gallium llvmpipe driver, which is a software rasterizer that uses LLVM to do runtime code generation. It only needs a CPU to run graphics computations and thus brings full GLES support to all Replicant devices.

llvmpipe has been integrated in Replicant 6 but it's not activated by default yet as it is very slow. It is also not fully complete.

To fix that, llvmpipe and/or the integration of it in Replicant should be optimized. We should first start by configuring llvmpipe and/or Mesa to not implement very expensive OpenGL operations. If that's not sufficient, or if that breaks application compatibility, various software or hardware features (ARM NEON, hardware 2D acceleration, etc) could be used to improve the speed.

Considerable speed improvements may be achieved with a fine-tuned emulation for division instructions. The ARM cores on many Replicant devices do not have hardware support for the SDIV/UDIV instructions. We should profile some apps and check whether GLES functions requiring divisions are to blame for the poor performance.

Hardware requirements : A computer that is able to build Replicant. A smartphone or tablet that is supported by Replicant to be able to test the result.

Difficulty: Medium / Hard (depending on the amount of optimizations required)

Requirements/Prerequisites: See with Mesa project

Expected outcomes: faster llvmpipe on ARM devices, able to run apps such as Fennec F-Droid (Firefox).

Time estimation:

Step man-hours
Setup a testing and benchmarking environment 40
Disable expensive OpenGL operations. Check speedup and stability. 24
Recap matrix operations (Linear Algebra) and study ARM NEON. 48
Do a profiling of several apps to find the most used GLES operations. 32
Use Ne10 library or Neon Intrinsics for the most used GLES operations. 80
Fix bugs, re-write the code where needed, get it stable. 80
TOTAL 304

Lima driver

Lima is a free software Mesa driver for ARM Mali-4xx (Utgard) GPUs. These GPUs are present in several Replicant supported devices such as Galaxy S2, S3, S3 4G, Note and Note 2.

Lima aims to full GLES support but it is still in development. However the current implementation status already allows the hardware acceleration of several tasks. GPU-based hardware acceleration is faster and less power hungry than software rendering, both by several orders of magnitude. It would allow Replicant devices to run applications with a performance close to that of non-free devices.

Hardware requirements : A computer that is able to build Replicant. A Replicant device with a Mali-4xx GPU that can run mainline Linux (e.g. Galaxy S3 or Note 2).

Difficulty: Medium

Requirements/Prerequisites: See with Lima project

Expected outcomes: Lima driver being used for GLES rendering on a supported device.

Step man-hours
Rebase Lima's Linux kernel DRM driver on top of forkbomb's Midas on Mainline kernel. 80
Replace mainline Mesa for Lima's Mesa (with their driver). 16
Build and test thoroughly with synthetic and real applications. 40
Create a fallback mechanism that uses the software renderer for GLES functions not yet implemented in Lima. 100
TOTAL 236

Software Bill of Materials

"Graphics acceleration on Replicant" nlnet Grant application

Project name Graphics acceleration on Replicant
Website / wiki https://redmine.replicant.us/projects/replicant/wiki/Tasks_funding#Graphics-acceleration

Abstract: Can you explain the whole project and its expected outcome(s) in 1200 characters

Replicant is a fully free software Android distribution which is approved by the
FSF. All supported devices on Replicant currently lack a free software driver
for their GPU. As such, OpenGL ES (GLES) rendering must be done on the CPU
through software rendering (SR).

Replicant's current renderer is both incomplete and slow. It causes essential
apps like web browsers to crash due to lack of GLES 2.0, and many other
apps run too slow to be usable.

This project aims to fix this by complementing Android's 9 graphics stack.
Adding a few missing components will created of a fully-free, fast and compliant
graphics stack.

First we will write a gralloc (graphics memory allocator) tailored for SR that
is compatible with drm-hwcomposer (a libre implementation of Android's Hardware
Composer HAL). This gralloc enables drm-hwcomposer to work with SurfaceFlinger
and SwiftShader, creating a stack capable of GLES 2.0 on the CPU of all Replicant
devices.

Afterwards we will integrate and optimize Mesa's llvmpipe SR, which offers better
community support than SwiftShader. As last step we will add support for the
Lima driver, which will bring an even faster GPU-backed GLES to at least 5
devices.

Have you been involved with projects or organizations relevant to this project before?
And if so, can you tell us a bit about your contributions?
SEE TEMPLATE
Requested Amount (Between 5000 and 50000 Euros) 50000 Euros
Does the project have other funding sources, both past and present? SEE TEMPLATE

Explain what the requested budget will be used for?

The budget will only be used to fund this project through contract work.

We estimate that this project should take 868 man-hours to reach full completion,
with 632 man-hours being enough to reach all software rendering goals, leaving only
the GPU rendering to be done. A detailed run-down of this estimate is available at
https://redmine.replicant.us/projects/replicant/wiki/Tasks_funding#Graphics-acceleration

So far we have a team of two people interested on working on this project (the
two authors and submitters of this application). Both can commit to the project
on a part-time regime (17.5 hours per week), which means that the project should
be fully completed in about 6 months.

We will make sure that everybody has a chance to apply for doing contract work.
If we take the cost of a freelance developer in the USA (75 to 150 USD
per hour) as a basis, to enable people living in Europe and the USA
to apply, we can fund between 380 and 760 man-hours with the 50000 EUR budget.
This should be enough to cover all work on software rendering plus the initial
work on GPU rendering.

As happens on all software projects, getting a precise time/effort evaluation is
a difficult endeavour, specially when dealing with a project that is heavy on
research such as this one.

If the software rendering goals are not reached when the 50000 EUR budget runs
out, or if the Replicant project deems it necessary to have GPU rendering, it
will use its existing funds to pay for contract work if no volunteers are found
to finish the project.

The Replicant project will also make sure that the people working on this project
have the necessary hardware to do it, for instance by shipping or reimbursing the
purchase of a compatible smartphone with the Replicant project funds.

Compare your own project with existing or historical efforts.

Past Replicant versions have relied on patches to the Android framework to make
software rendering work. These patches were quite specific for Replicant and
had no use elsewhere. This made them unfit for upstreaming or sharing with any
other project.

Android's Project Treble new graphics stack allows us to follow a different
approach this time. Instead of patching the Android framework, we will
implement one of the well defined Android HALs (Hardware Abstraction Layer):
the gralloc HAL. The end result will be a software library that can prove to be
useful on several projects besides Replicant (e.g. Android-x86 project) and
thus fit for upstreaming.

Furthermore, past Replicant versions relied on Google's software renderers
(ligAGL and libpixelflinger) for OpenGL ES support. As quite a few other
Google's open-source projects, these two had no community behind them and got
stalled as soon as Google deprecated them.

This time will we take a different approach. Although our first graphics stack
will rely on Google's SwiftShader renderer, we will then move our efforts into
Mesa. Mesa is a big community project, with hundreds of active contributors and
great community support. It includes the llvmpipe software renderer along with
new drivers in development for GPUs present on current and future Replicant
devices. Mesa should provide a stable and maintained platform for years to come.

What are significant technical challenges you expect to solve during the project, if any?

We expect to solve significant technical challenges during this project:
1. Implementation of the first Android gralloc library compatible with software
rendering.
2. Development of free-software benchmarks for OpenGL ES on Android, used to test
our optimizations to llvmpipe.
3. Optimization of llvmpipe by at least one order of magnitude.
4. Running an exynos based smartphone with fully free-software GPU graphics
acceleration.

Describe the ecosystem of the project, and how you will engage with relevant actors and promote the outcomes?

This project will re-use code from several projects such as Android,
drm-hwcomposer, Mesa and Lima driver. Whenever possible we will foster
collaboration with these projects and submit our changes upstream.

The Replicant project contributors and the FSF will supervise
contractors to do the work.

A blog post will announce that the Replicant project
has got some funding for this specific task, and that it is
looking for a contractor to work on it. This is to make sure
that everyone has equal chances in the application process.

Then the most suited contractor will be selected. Only contractors
that already have worked on similar tasks as part of free and open
source software projects will be chosen. This way we can look at
their existing contributions and make sure that they are able to
do the task before engaging with them.

The Replicant project will also make sure that the contractor has
or gets the hardware required to work on the task, before starting
to work on it.

Attachments SEE TEMPLATE

Updated by Denis 'GNUtoo' Carikli about 4 years ago · 270 revisions

Also available in: PDF HTML TXT