Replicant

h1. Tools Installation

This page explains how to install the various tools used with Replicant. It is assumed that you are running a GNU/Linux operating system.

h2. ADB

ADB can be installed from the repositories of your GNU/Linux distribution (if available) or from our released tools.

Note: you may need to run ADB as root if your current user doesn't have USB access privileges.

h3. From GNU/Linux distributions repositories

h4. Debian

<pre>

apt-get install android-tools-adb

</pre>

h3. From our released tools

1. Download the @adb@ tool, the @adb.sig@ signature and the checksum from [[ReplicantImages]] for the latest image

2. Make sure you have added the [[ReplicantReleaseKey|Replicant release key]] to your GPG keyring

3. Check the signature of the @adb@ tool:

<pre>

gpg --armor --verify path/to/adb.sig path/to/adb

</pre>

4. Make sure the check succeeds, *do not run the binary if it doesn't*!

5. Check the checksum of the @adb@ tool:

<pre>

md5sum -c tools.md5

</pre>

6. Make sure the check succeeds for @adb@, *do not run the binary if it doesn't*!

As @adb@ is built as a 32 bit binary, you will need to install compatibility libraries for 32 bits executables if your computer is running on a 64 bit architecture.

7. Make sure @adb@ can be executed:

<pre>

chmod a+x adb

</pre>

h2. Fastboot

Fastboot can be installed from the repositories of your GNU/Linux distribution (if available) or from our released tools.

Note: you may need to run fastboot as root if your current user doesn't have USB access privileges.

h3. From GNU/Linux distributions repositories

h4. Debian

<pre>

apt-get install android-tools-fastboot

</pre>

h3. From our released tools

1. Download the @fastboot@ tool, the @fasboot.sig@ signature and the checksum from [[ReplicantImages]] for the latest image

2. Make sure you have added the [[ReplicantReleaseKey|Replicant release key]] to your GPG keyring

3. Check the signature of the @fastboot@ tool:

<pre>

gpg --armor --verify path/to/fastboot.sig path/to/fastboot

</pre>

4. Make sure the check succeeds, *do not run the binary if it doesn't*!

5. Check the checksum of the @fastboot@ tool:

<pre>

md5sum -c tools.md5

</pre>

6. Make sure the check succeeds for @fastboot@, *do not run the binary if it doesn't*!

As @fastboot@ is built as a 32 bit binary, you will need to install compatibility libraries for 32 bits executables if your computer is running on a 64 bit architecture.

7. Make sure @fastboot@ can be executed:

<pre>

chmod a+x fastboot

</pre>

h2. Heimdall

Heimdall can be installed from the repositories of your GNU/Linux distribution (if available), from our released tools or from the developer's website.

Note: you may need to run heimdall as root if your current user doesn't have USB access privileges.

h3. From GNU/Linux distributions repositories

h4. Debian

<pre>

apt-get install heimdall-flash

</pre>

h3. From our released tools

1. Download the @heimdall@ tool, the @heimdall.sig@ signature and the checksum from [[ReplicantImages]] for the latest image

2. Make sure you have added the [[ReplicantReleaseKey|Replicant release key]] to your GPG keyring

3. Check the signature of the @heimdall@ tool:

<pre>

gpg --armor --verify path/to/heimdall.sig path/to/heimdall

</pre>

4. Make sure the check succeeds, *do not run the binary if it doesn't*!

5. Check the checksum of the @heimdall@ tool:

<pre>

md5sum -c tools.md5

</pre>

6. Make sure the check succeeds for @heimdall@, *do not run the binary if it doesn't*!

As @fastboot@ is built as a 32 bit binary, you will need to install compatibility libraries for 32 bits executables if your computer is running on a 64 bit architecture.

7. Make sure @fastboot@ can be executed:

<pre>

chmod a+x heimdall

</pre>

h3. From the developer's website

Instructions to install heimdall can be found on the developer's website: http://glassechidna.com.au/heimdall/