Actions
UART » History » Revision 17
« Previous |
Revision 17/93
(diff)
| Next »
Denis 'GNUtoo' Carikli, 11/27/2018 05:16 PM
Serial port¶
There is an in-depth article covering several Samsung devices in the SamsungSerial page
Settings¶
| Device | I/O voltage | ID<->GND | SOC TX | SOC RX | switch | Comments |
|---|---|---|---|---|---|---|
| I9300 | 1.8V (measured between USB GND and USB VCC) | 619kOhms | D- | D+ | It gives a shell once Replicant has booted | |
| Nexus S | 150 kOhm | FSA9480 | ||||
| Galaxy Nexus | ||||||
| Optimus Black | N/A1 |
1 Code is required to use the switch as you need to configure both the MUIC and DP3T switch
Updated by Denis 'GNUtoo' Carikli almost 6 years ago · 17 revisions