Actions
UART » History » Revision 18
« Previous |
Revision 18/93
(diff)
| Next »
Denis 'GNUtoo' Carikli, 11/27/2018 05:17 PM
Serial port¶
There is an in-depth article covering several Samsung devices in the SamsungSerial page
Settings¶
| Device | I/O voltage | ID<->GND | SOC TX | SOC RX | switch | Comments |
|---|---|---|---|---|---|---|
| I9300 | 1.8V1 | 619kOhms | D- | D+ | It gives a shell once Replicant has booted | |
| Nexus S | 150 kOhm | FSA9480 | ||||
| Galaxy Nexus | ||||||
| Optimus Black | N/A2 |
1 Measured between USB GND and USB VCC
fn2. Code is required to use the switch as you need to configure both the MUIC and DP3T switch
Updated by Denis 'GNUtoo' Carikli over 6 years ago · 18 revisions