Actions
UART » History » Revision 29
« Previous |
Revision 29/93
(diff)
| Next »
Denis 'GNUtoo' Carikli, 01/24/2019 03:06 PM
Serial port¶
There is an in-depth article covering several Samsung devices in the SamsungSerial page
Settings¶
Device and documentation | I/O voltage | ID<->GND | SOC TX | SOC RX | switch | Comments |
---|---|---|---|---|---|---|
I9300 | 1.8V1 | 619 kOhms3 | D- | D+ | It gives a shell once Replicant has booted | |
I9305 | ||||||
Nexus S | 150 kOhm | FSA9480 | ||||
Galaxy Nexus | 619 kOhms4 | |||||
Optimus Black | N/A2 | DP3T |
1 Measured between USB GND and USB VCC
2 Code is required to use the switch as you need to configure both the MUIC and DP3T switch
3 See The related driver source code
4 See the postmarketOS wiki page on Serial debugging
Interesting links¶
There is a page on Serial debugging on the postmarketOS wiki that contains information for using the serial port for many smartphones models.
Updated by Denis 'GNUtoo' Carikli almost 6 years ago · 29 revisions