UART » History » Revision 30

« Previous | Revision 30/93 (diff) | Next »
Denis 'GNUtoo' Carikli, 01/24/2019 03:08 PM

Serial port

There is an in-depth article covering several Samsung devices in the SamsungSerial page


Device and documentation I/O voltage ID<->GND SOC TX SOC RX switch Comments
I9300 1.8V1 619 kOhms3 D- D+ MAX776935 It gives a shell once Replicant has booted
Nexus S 150 kOhm FSA9480
Galaxy Nexus 619 kOhms4
Optimus Black N/A2 DP3T

1 Measured between USB GND and USB VCC

2 Code is required to use the switch as you need to configure both the MUIC and DP3T switch

3 See The related driver source code

4 See the postmarketOS wiki page on Serial debugging

5 See the driver and the ifixit teardown

Interesting links

There is a page on Serial debugging on the postmarketOS wiki that contains information for using the serial port for many smartphones models.

Updated by Denis 'GNUtoo' Carikli over 5 years ago · 30 revisions

Also available in: PDF HTML TXT