UART » History » Revision 41

« Previous | Revision 41/84 (diff) | Next »
Denis 'GNUtoo' Carikli, 01/14/2020 04:30 PM
Add Odroid U3


There is an in-depth article covering several Samsung devices in the SamsungSerial page


Device and documentation I/O voltage ID<->GND SOC TX SOC RX switch stock bootloader settings Comments
I9300 1.8V1 619 kOhms3 D- D+ MAX776935 * speed: 115200
* pressing the volume-down button during boot increase verbosity
It gives a shell once Replicant 6 has booted
N7100 ?
N7105 ?
Galaxy Nexus 619 kOhms4
Nexus S 150 kOhm FSA9480
Optimus Black 1.8V6 N/A2 DP3T
ODROID-U3, console UART 1.8V connector ttySAC1, 115200 8N1
ODROID-U3, IO pins UART 1.8V connector ttySAC0, 115200 8N1

1 Measured between USB GND and USB VCC

2 Code is required to use the switch as you need to configure both the MUIC and DP3T switch

3 See The related driver source code

4 See the postmarketOS wiki page on Serial debugging

5 See the driver and the ifixit teardown

6 Reference: OptimusBlackSerial

Interesting links

  • There is a page on Serial debugging on the postmarketOS wiki that contains information for using the serial port for many smartphones models.
  • mv-uart A serial port adapter with configurable voltages (and GPIOs)

Updated by Denis 'GNUtoo' Carikli 7 months ago · 41 revisions