Actions
UART » History » Revision 43
« Previous |
Revision 43/93
(diff)
| Next »
Denis 'GNUtoo' Carikli, 01/29/2020 07:34 PM
UART¶
There is an in-depth article covering several Samsung devices in the SamsungSerial page
Settings¶
| Device and documentation | I/O voltage | ID<->GND | SOC TX | SOC RX | switch | stock bootloader settings | Comments |
|---|---|---|---|---|---|---|---|
| I9300 | 1.8V1 | 619 kOhms3 | D- | D+ | MAX776935 | * speed: 115200 * pressing the volume-down button during boot increase verbosity |
It gives a shell once Replicant 6 has booted |
| I9305 | |||||||
| N7100 | ? | ||||||
| N7105 | ? | ||||||
| Galaxy Nexus | 619 kOhms4 | * By default: ttyFIQ0, 115200 8N1 * With patching: ttyO2, 115200 8N1 See GalaxyNexusI9250SerialConsole for more details. |
|||||
| Nexus S | 150 kOhm | FSA9480 | |||||
| Optimus Black | 1.8V6 | N/A2 | DP3T | ||||
| ODROID-U3, console UART | 1.8V | connector | ttySAC1, 115200 8N1 | ||||
| ODROID-U3, IO pins UART | 1.8V | connector | ttySAC0, 115200 8N1 | ||||
1 Measured between USB GND and USB VCC
2 Code is required to use the switch as you need to configure both the MUIC and DP3T switch
3 See The related driver source code
4 See the postmarketOS wiki page on Serial debugging
5 See the driver and the ifixit teardown
6 Reference: OptimusBlackSerial
Interesting links¶
- There is a page on Serial debugging on the postmarketOS wiki that contains information for using the serial port for many smartphones models.
- mv-uart A serial port adapter with configurable voltages (and GPIOs)
Updated by Denis 'GNUtoo' Carikli about 4 years ago · 43 revisions